Development of Green and High-Throughput Microwell Spectrophotometric Methods for Determination of Galidesivir in Bulk Drug and Dosage Forms Based on Simple Oxidimetric Reactions With Inorganic Agents

BACKGROUND

Galidesivir hydrochloride (GDV) is a new potent and safe antiviral drug used for the treatment of a broad spectrum of viral diseases, including COVID-19. In the literature, no analytical method exists for the determination of GDV in bulk or dosage form.

OBJECTIVE

The objective of this study was the investigation of oxidation reactions of GDV with five inorganic oxidizing reagents and the employment of the reactions in the development of five green microwell spectrophotometric methods (MW-SPMs) with simple procedure and high throughputs for determination of GDV in its bulk and dosage forms (capsules).

METHODS

The reactions were carried out in 96-well plates, and the absorbances of reaction solutions were measured by an absorbance microplate reader. Variables influencing the reactions were carefully investigated and optimized.

RESULTS

Under the refined optimum conditions, Beer's law with excellent correlation coefficients (0.9992-0.9997) was followed in GDV concentrations in a general range of 5-700 µg/mL, and the limits of detection were ≥1.8 µg/mL. All validation parameters of all methods were acceptable. The methods were successfully applied to the analysis of GDV in bulk drug and capsules with high accuracy and precision; the recovery percentages were 98.6-101.2 ± 0.58-1.14%. The greenness of MW-SPMs was evaluated by three comprehensive metric tools, which demonstrated the adherence of MW-SPMs to the principles of the green analytical chemistry (GAC) approach.

CONCLUSIONS

The proposed MW-SPMs combined the advantages of microwell-based practice and the use of common laboratory reagents for the analysis. The advantages of microwell analysis were the high throughput, readily available for semi-automation, reduced samples/reagents volume, precise measurements, and versatility. The advantages of using common laboratory reagents were the availability, consistency, compatibility, safety, and cost-effectiveness.

HIGHLIGHTS

Overall, the proposed MW-SPMs are versatile, valuable tools for the quantitation of GDV during its pharmaceutical manufacturing.

Abdel Salam R, M. Hadad G, Abdelshakour MA. Ecological spectroscopic methodologies for quantifying co-administered drugs in human plasma by photochemical quantum mechanical simulation

Urinary tract infections (UTIs) constitute the second most prevalent bacterial infections in the elderly demographic. The treatment landscape involves various antibiotics targeting the causative organisms; nevertheless, the emergence of resistance significantly impacts therapeutic effectiveness. Presently, a fixed-dose pharmaceutical combination is advocated to optimize patient outcomes by mitigating the risks of bacterial resistance and associated side effects. Ofloxacin (OFL) and cefpodoxime proxetil (CPD) combinations, co-administered with flavoxate hydrochloride (FLV), have demonstrated efficacy in UTI cases, offering relief from concomitant symptoms. In the pharmaceutical market, fixed-dose combinations have gained prominence, driven by advantages such as enhanced patient medication adherence and compliance. In the realm of analytical chemistry, the integration of green practices in the initial phases of method development is exemplified by the Greenness by Design (GbD) strategy. While univariate spectroscopic methods are conventionally considered suboptimal compared to chemometric techniques for resolving intricate mixtures, GbD approach, when applied to UV spectroscopy, enable univariate methods to attain comparable or superior outcomes. GbD adopts a systematic approach to optimize experimental conditions, minimizing environmental impact and maximizing analytical performance. Critical to GbD applications in UV spectroscopy is solvent selection, influencing spectral resolution and measurement sensitivity. GbD employs a combination of in-vitro and in-silico experiments to evaluate solute-solvent interactions with underlying photochemical quantum phenomena affecting the resulting spectral morphology, identifying an optimal compromise solvent with high resolution and minimal ecological impact. Consequently, it facilitates the efficient resolution of spectral overlapping and determination of complex mixtures in UV spectroscopy using univariate methods. Comparative analysis with chemometric techniques, acknowledged as potent spectral resolving methods, demonstrated that GbD-based univariate methods performed equivalently. The methodology was validated according to ICH recommendations, establishing a linear quantitation range (2-30 μg/mL) and a limit of detection (0.355-0.414 μg/mL) for the three drugs in human plasma. The greenness of the developed methodology was affirmed through the AGREE assessment protocol, confirming its environmentally conscious attributes.

Charge transfer complex-based spectrophotometric analysis of famotidine in pure and pharmaceutical dosage forms

A straightforward and efficient spectrum technique was created using Ortho-chloranil as the electron acceptor (-acceptor) in a charge transfer (CT) complex formation reaction to determine the concentration of famotidine (FMD) in solutions. Compared to the double-distilled blank solution, the reaction result detected a definite violet colour at a maximum absorption wavelength of 546 nm, For concentrations range 2-28 µg/ml, the technique demonstrated excellent compliance with Beer-Law and Lambert's, as evidenced by its molar absorptivity of 2159.648 L mol-1 cm-1. Lower detection limits of 0.3024 µg/ml and 1.471 µg/ml, respectively, were discovered. The complexes of famotidine and Ortho-chloranil were found to have a 2:1 stoichiometry. Additionally, the suggested approach effectively estimated famotidine concentrations in pharmaceutical formulations, particularly in tablet form.

Eco-Friendly UV-Spectrophotometric Methods Employing Magnetic Nano-Composite Polymer for the Extraction and Analysis of Sexual Boosters in Adulterated Food Products: Application of Computer-Aided Design

BACKGROUND

Solid phase extraction (SPE) techniques, based on computationally designed magnetic-based multi-targeting molecular imprinted polymer (MT-MIP), combined with UV spectrophotometric approaches provide advantages in the examination of counterfeit samples.

OBJECTIVE

The current work describes an innovative and sustainable methodology for the simultaneous determination of tadalafil (TAD) and dapoxetine hydrochloride (DAP) in aphrodisiac counterfeit products (honey and instant coffee) utilizing SPE exploiting MT-MIP. Additionally, an innovative UV spectrophotometric method capable of resolving TAD in its pharmaceutical binary mixtures with DAP was developed. A novel computational approach was implemented to tailor the synthesis and design of the MT-MIP particles.

METHODS

We applied a newly developed UV spectrophotometric method which was based on a Fourier self-deconvolution (FSD) method coupled with the isoabsorptive point for determination of TAD and DAP in pharmaceutical dosage form. We also applied an SPE process based on MT-MIP designed particles, assisting in the analysis of both drugs in counterfeit food samples. The SPE process and the UV spectroscopic methodology were assessed regarding their greenness using the pioneering green analytical procedure index (GAPI), analytical greeness including sample preparation (AGREEprep) and AGREE tools. The synthesized MT-MIP particles were characterized by scanning electron microscopy and energy-dispersive x-ray spectroscopy.

RESULTS

The suggested spectrophotometric methods revealed a wide linear concentration range of 2-50 µg/mL with lower LODs in the range of 0.604-0.994 µg/mL. Additionally, the suggested method demonstrated the utmost sensitivity and eco-friendliness for their target in its mixed dosage form and counterfeit food products.

CONCLUSION

The SPE process and the developed analytical UV spectroscopic methodology were validated as per the ICH guidelines, and were found to be suitable for overseeing some counterfeiting activities in commercially available honey and instant coffee aphrodisiac products.

HIGHLIGHTS

An SPE method based on MT-MIP magnetic-based polymer and a UV spectroscopic method were successfully developed for analysis of TAD and DAP in different matrices.

Innovative and sustainable deconvoluted amplitude factor spectrophotometric method for the resolution of various severely overlapping pharmaceutical mixtures: Applying the complex-GAPI-tool

UV spectroscopy is considered the simplest, the most money and time investor technique in analytical research. Besides its lowered solvent and energy consumption leading to greener outcomes, its practicality is wide and suitable for a wide range of applications. Multicomponent mixtures are always representing themselves as a problematic challenge for any analytical technique fortunately UV spectroscopic methods found many ways to tackle these mixtures. Fourier self-deconvolution (FSD) was recently applied in UV spectroscopy as an effective tool for the resolution of binary mixtures unfortunately like any other method may fail to completely resolve severely overlapping mixtures. In this paper, we epitomize the newly developed deconvoluted amplitude factor (DAF) spectrophotometric approach which couples the concepts of both the FSD and the amplitude factor methods for the resolution of tadalafil (TAD) in its binary mixtures with dapoxetine hydrochloride (DAP) or tamsulosin hydrochloride (TAM). The embraced approach was assessed regarding its greenness utilizing different assessing protocols to give evident proof for its sustainability. The innovative approach showed an enhancement in the resolution of binary mixtures and showed high sensitivity as noticed from limits of detection and quantitation which were (0.374, 1.136 μg/mL), (0.269, 0.817 μg/mL), and (0.518, 1.569 μg/mL) for TAD, DAP, and TAM, respectively. The method was validated as per ICH guidelines recommendations and also was statistically compared with recently reported methods which revealed no statistically significant difference. A very handy and reader-friendly data presentation approach was followed for the ease of statistical data interpretation and evaluation.

Computer-Aided Design of Eco-Friendly Imprinted Polymer Decorated Sensors Augmented by Self-Validated Ensemble Modeling Designs for the Quantitation of Drotaverine Hydrochloride in Dosage Form and Human Plasma

BACKGROUND

Computationally designed molecular imprinted polymer (MIP) incorporation into electrochemical sensors has many advantages to the performance of the designed sensors. The innovative self-validated ensemble modeling (SVEM) approach is a smart machine learning-based (ML) technique that enables the design of more accurate predictive models using smaller data sets.

OBJECTIVE

The novel SVEM experimental design methodology is exploited here exclusively to optimize the composition of four eco-friendly PVC membranes augmented by a computationally designed magnetic molecularly imprinted polymer to quantitatively determine drotaverine hydrochloride (DVN) in its combined dosage form and human plasma. Furthermore, the application of hybrid computational simulations such as molecular dynamics and quantum mechanical calculations (MD/QM) is a time-saving and eco-friendly provider for the tailored design of the MIP particles.

METHOD

Here, for the first time, the predictive power of ML is assembled with computational simulations to develop four PVC-based sensors decorated by computationally designed MIP particles using four different experimental designs known as central composite, SVEM-LASSO, SVEM-FWD, and SVEM-PFWD. The pioneering AGREE approach further assessed the greenness of the analytical methods, proving their eco-friendliness.

RESULTS

The proposed sensors showed decent Nernstian responses toward DVN in the range of 58.60-59.09 mV/decade with a linear quantitative range of 1 × 10-7 - 1 × 10-2 M and limits of detection in the range of 9.55 × 10-8 to 7.08 × 10-8 M. Moreover, the proposed sensors showed ultimate eco-friendliness and selectivity for their target in its combined dosage form and spiked human plasma.

CONCLUSIONS

The proposed sensors were validated in accordance with International Union of Pure and Applied Chemistry (IUPAC) recommendations, proving their sensitivity and selectivity for drotaverine determination in dosage form and human plasma.

HIGHLIGHTS

This work presents the first ever application of both the innovative SVEM designs and MD/QM simulations in the optimization and fabrication of drotaverine-sensitive and selective MIP-decorated PVC sensors.

Facile and rapid determination of oxalic acid by fading spectrophotometry based on Fe(III)-sulfosalicylate as colorimetric chemosensor

Spectrophotometry is an economic and rapid method for detecting oxalic acid (OA), while the reported methods have some drawbacks, such as narrow linear range, long response time, delicate operation and required expensive reagents. Herein, we found that the as-synthesized Fe(III)-sulfosalicylate (FeSSA) could be used as an efficient colorimetric chemosensor to detect OA, and the established FeSSA-based fading spectrophotometry showed prominent advantages over the existing ones in detecting OA. The as-established method has wider linear range of 0.80-160 mg/L with regression coefficient ≥ 0.999, while the widest linear range is just 2.7-54 mg/L among the reported ones. Moreover, the method has low limit of detection (0.74 mg/L), extremely fast response (several seconds), satisfactory selectivity, high accuracy and precision. Most importantly, its reliability was further verified by employing it to determine OA concentration during the degradation process of organic pollutants. The measured OA concentration at any time interval was perfectly consistent with those determined by the well-recognized high performance liquid chromatography (HPLC). These confirmed that the FeSSA-based fading spectrophotometry is an efficient, simple, fast, accurate and economic method to determine OA in a wide concentration range.

Computational design for eco-friendly visible spectrophotometric platform used for the assay of the antiviral agent in pharmaceutical dosage form

Nowadays, the analytical community is focusing on developing new analytical methods that incorporate principles of green analytical chemistry to reduce adverse impacts on the environment and humans. In this study, we focused specifically on establishing a correlated connection between theoretical and experimental applications via developing green, and eco-friendly visible spectrophotometric methods. These methods were relied on charge-transfer complexation (CTC) between ledipasvir and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), or chloranilic acid (CA) for sensitive colorimetric analysis of ledipasvir in the presence of sofosbuvir (Sofolanork plus®). The results were evaluated as modern computational chemistry using molecular modeling technology. At ambient temperature, the reactions for DDQ and CA took 15 and 10 min, respectively, to produce a purple red-colored solution with DDQ absorbing maximally at 588 nm and a purple-colored solution with CA absorbing maximally at 522 nm. Linearity was achieved for ledipasvir utilizing DDQ and CA in the concentration ranges of 8-80 µg.mL^-1 and 40-400 µg.mL^-1, respectively. The precision and accuracy of the methods mentioned were determined. Finally, the results were statistically compared to a previously published spectrophotometric technique, and no significant differences were found.

Analysis of the ternary antiretroviral therapy dolutegravir, lamivudine and abacavir using UV spectrophotometry and chemometric tools

Herein, a simple spectrophotometric method coupled with chemometric techniques i.e. partial least square (PLS) and genetic algorithm (GA) were utilized for the simultaneous determination of the vital ternary antiretroviral therapy dolutegravir (DTG), lamivudine (LMV), and abacavir (ACV) in their combined dosage form. Calibration (25 samples) and validation (13 samples) sets were prepared for these drugs at different concentrations via implementing partial factorial experimental designs. The zero order UV spectra of calibration and validation sets were measured and then subjected for further chemometric analysis. Partial least squares with/without variable selection procedures i.e. genetic algorithm (GA) were utilized to untangle the UV spectral overlapping of these mixtures. Cross-validation and external validation methods were applied to compare the performance of these chemometric techniques in terms of accuracy and predictive abilities. It was found that six latent variables were optimum for modelling DTG, four latent variables for modelling LMV and three latent variables for modelling ACV. Although, good recoveries with prompt predictive ability were attained by these PLS, GA-PLS showed better analytical performance owing to its capability to remove redundant variables i.e. the number of absorbance variables have been reduced to about 21-29%. The proposed chemometric methods can be reliably applied for simultaneous determination of DTG, LMV, and ACV in their laboratory prepared mixtures and pharmaceutical preparation posing these chemometric methods as worthy and substantial analytical tools in in-process testing and quality control analysis of many antiretroviral pharmaceutical preparations.

Advanced eco-friendly UV spectrophotometric approach for resolving overlapped spectral signals of antihypertensive agents in their binary and tertiary pharmaceutical dosage form

Cardiovascular disorders are among the foremost causes of death worldwide, especially hypertension, a silent killer syndrome that requires multiple drug therapy for proper management. This work presents novel and green spectrophotometric methods for the concurrent analysis of Amlodipine (AML), Telmisartan (TEL), Hydrochlorothiazide (HCTZ), and Chlorthalidone (CLO) in their pharmaceutical dosage form. The suggested methods were Fourier-self deconvolution, amplitude factor, and first derivative methods developed and validated for the simultaneous determination of a tertiary mixture of AML, TEL, and HCTZ in TELVAS 3D 80 mg tablet and a binary mixture of TEL and CLO in TELMIKIND-CT 40 tablets. The investigated methods revealed limits of detection 0.7283 µg/ml for AML and ranging from 0.0121 to 0.0433, 0.1547 to 0.1767 µg/ml and 0.0578 to 0.1262 µg/ml for TEL, HCTZ, and CLO, respectively.The greenness of the suggested techniques was examined by an eco-scale scoring method called the penalty points, which revealed that the methods were excellent green regarding several parameters as reagents, instrument, and waste safety. The introduced methods' validity was investigated by resolving prepared laboratory mixtures containing different AML, TEL, HCTZ, or TEL and CLO ratios. Furthermore, the introduced methods were ensured by the standard addition technique. Finally, the obtained results were statistically compared by the reported spectrophotometric methods, showing no significant difference concerning precision and accuracy.

Spectral analysis of severely overlapping spectra based on newly developed mathematical filtration techniques and ratio spectra manipulations: An application to the concurrent determination of dapoxetine and sildenafil in combined dosage form

BACKGROUND

Dapoxetine hydrochloride (DAP) and sildenafil citrate (SIL) have proven clinically effective in the treatment of comorbid conditions like erectile dysfunction and premature ejaculation. The analysis of DAP and SIL combinations represents a challenge because of the severe overlap of these compounds' spectra. Six newly developed methods were proven effective for resolving such a challenging overlap. They also exhibited the advantage of simplicity as they depend on the zero-order spectrum and only require simple mathematical handling.

OBJECTIVE

We suggested six simple, precise, and sensitive spectrophotometric methods based on mathematical filtration techniques and ratio spectra manipulations to resolve the spectra of DAP and SIL in their bulk and combined pharmaceutical dosage form and estimate the relevant individual concentrations.

METHODS

The first three methods were based on the zero-order range and involved modest mathematical manipulations. They are the induced dual-wavelength, Fourier self-deconvolution, and absorptivity factor spectrophotometric methods. Three other methods that are based on ratio spectra manipulation were developed: ratio difference, mean centering of the ratio spectra, and derivative ratio spectrum.

RESULTS

We determined the performance of the suggested methods for estimating DAP and SIL in their laboratory mixtures and their combined pharmaceutical dosage form. The linear ranges for DAP and SIL were 1-40 µg/ml and 2-60 µg/ml, respectively. The detection limits were in the 0.18-1.10 µg/ml range for DAP and in the 0.68-1.11 µg/ml range for SIL. The developed methods were validated as per the ICH guidelines for linearity, detection limit, quantitation limit, selectivity, precision, and accuracy. Normal probability, interval, and Tukey's simultaneous significant difference plots were utilized to confirm and better visualize the analysis of variance test results. Statistically, no significant difference was observed to exist between results obtained from the hereby developed and the previously reported methods.

Smart UV spectrophotometric methods based on simple mathematical filtration for the simultaneous determination of celecoxib and ramipril in their pharmaceutical mixtures with amlodipine: A comparative statistical study

Two newly introduced pharmaceutical mixtures of amlodipine/celecoxib and amlodipine/ramipril were developed to manage hypertension and the associated osteoarthritis. The current work presents three newly developed UV spectrophotometric methods depending on minimal mathematical manipulations on the zero-order spectrum namely: absorption correction, induced dual-wavelength, and Fourier self deconvoluted method; for the simultaneous determination of celecoxib and ramipril in their pharmaceutical combined dosage forms with amlodipine. In absorption correction and induced dual-wavelength method, celecoxib and ramipril were determined at 253 and 222 nm for absorption correction and (251-270 nm) and (222-230 nm) for induced dual-wavelength method, respectively from the zero-order spectrum after calculating the absorption correction and equality factors for amlodipine. Amlodipine itself was determined at 361 nm from the zero-order spectrum in both methods. In Fourier self deconvoluted method, celecoxib and amlodipine zero-order spectra were deconvoluted, using the spectrophotometer software built-in Fourier wavelet function, and then was determined at 360 and 269 nm, respectively. The proposed methods were simple, accurate, and sensitive requiring minimal mathematical manipulations saving the time needed for analysis. The methods were linear over the range of (5-60 μg/ml), (5-30 μg/ml), and (5-110 μg/ml) for each of amlodipine, celecoxib, and ramipril, respectively. The limit of detection was in the range of (0.5781-0.7132 μg/ml) for amlodipine, (0.6497-1.0450 μg/ml) for celecoxib, and (0.0001-0.0003 μg/ml) for ramipril that indicated the sensitivity of these suggested methods. All methods were validated as per ICH recommendations regarding linearity, range, accuracy, precision, and selectivity. A statistical comparative study executed for the proposed methods with each other and with the reported methods showed no significant difference between the proposed methods and the reported methods.

Synchronous Spectrofluorimetry Coupled with Third-Order Derivative Signal Processing for the Simultaneous Quantitation of Telmisartan and Chlorthalidone Drug Combination in Human Plasma

This study is the first to develop and optimize a method for the simultaneous determination of chlorthalidone (CLT) and telmisartan (TEL) in, human plasma samples as well as in their newly released pharmaceutical tablet form, (Telmikind-CT 40®). The method is based on measuring fluorescence intensity, employing synchronous fluorescence mode coupled to third-order derivative signal processing, 0.5% w/v cetyl trimethyl ammonium bromide was used as cationic surfactant to enhance the fluorescence signal intensity and improve method sensitivity. The third-order derivative synchronous spectra of CLT and TEL are well separated with two zero-crossing points which allowed for the determination of CLT and TEL at 362 nm and 351 nm, respectively. Different experimental parameters were carefully investigated and optimized, calibration curves were constructed over concentration ranges of 20-1200 ng.mL-1 and 5-800 ng.mL-1 for CLT and TEL respectively. The developed method is simple and rapid, analytical parameters were validated according to ICH guidelines and high sensitivity was achieved as represented by limits of detection (LOD) of 4.69 and 1.58 ng.mL-1 for CLT and TEL respectively.