A low-voltage electro-membrane extraction for quantification of imatinib and sunitinib in biological fluids

Pretreatment and analysis techniques development of TKIs in biological samples for pharmacokinetic studies and therapeutic drug monitoring

Tyrosine kinase inhibitors (TKIs) have emerged as the first-line small molecule drugs in many cancer therapies, exerting their effects by impeding aberrant cell growth and proliferation through the modulation of tyrosine kinase-mediated signaling pathways. However, there exists a substantial inter-individual variability in the concentrations of certain TKIs and their metabolites, which may render patients with compromised immune function susceptible to diverse infections despite receiving theoretically efficacious anticancer treatments, alongside other potential side effects or adverse reactions. Therefore, an urgent need exists for an up-to-date review concerning the biological matrices relevant to bioanalysis and the sampling methods, clinical pharmacokinetics, and therapeutic drug monitoring of different TKIs. This paper provides a comprehensive overview of the advancements in pretreatment methods, such as protein precipitation (PPT), liquid-liquid extraction (LLE), solid-phase extraction (SPE), micro-SPE (μ-SPE), magnetic SPE (MSPE), and vortex-assisted dispersive SPE (VA-DSPE) achieved since 2017. It also highlights the latest analysis techniques such as newly developed high performance liquid chromatography (HPLC) and high-resolution mass spectrometry (HRMS) methods, capillary electrophoresis (CE), gas chromatography (GC), supercritical fluid chromatography (SFC) procedures, surface plasmon resonance (SPR) assays as well as novel nanoprobes-based biosensing techniques. In addition, a comparison is made between the advantages and disadvantages of different approaches while presenting critical challenges and prospects in pharmacokinetic studies and therapeutic drug monitoring.

Single and Competitive Adsorption of Naphthalene, Phenanthrene, and Pyrene on Polystyrene Nanofibers

In this investigation, polystyrene (PS) nanofibers were prepared by electrospinning for the adsorption of naphthalene (Nap), phenanthrene (Phe), and pyrene (Pyr) from an aqueous solution. Surface morphology and physicochemical characteristics of PS nanofibers were analyzed using Fourier transform infrared spectroscopy (FT-IR) and point-of-zero-charge calorimetry (pHpzc). The effects of pH, ion concentration, and temperature on the adsorption were also investigated. The adsorption mechanism of target pollutants on PS nanofibers was investigated by a batch adsorption method. The adsorption kinetic studies showed that the adsorption of the three polycyclic aromatic hydrocarbons (PAHs) on PS nanofibers conformed to the pseudo-second-order kinetic model in both single and ternary systems. Meanwhile, in a single system, the three PAHs adsorbed on nanofibers were controlled by both intraparticle diffusion and liquid film diffusion, whereas the adsorption of Nap in a ternary system was controlled mainly by intraparticle diffusion, and the adsorption of Phe and Pyr was controlled mainly by liquid film diffusion. The isotherm data indicated that the Freundlich model performed better than the Langmuir model for the adsorptions of Nap, Phe, and Pyr on PS nanofibers in both the single system and the ternary system. Due to competitive adsorption, the adsorption capacities of Nap and Pyr on PS nanofibers decreased from 105.816 and 19.098 mg g-1 in the single system to 23.626 and 12.126 mg g-1 in the ternary system, but the adsorption of Phe was not affected. π-π interactions and pore filling may be jointly involved in the adsorption of PAHs on PS nanofibers.

SPE of gallic acid and ascorbic acid in fruits using polymerized deep eutectic solvent-modified substrate

Aim: Novel substrates were synthesized by porous and nonporous polymerization of deep eutectic solvents on magnetic silica nanoparticles and introduced for dispersive solid-phase extraction of two analytes. Materials & methods: The prepared substrates were characterized, and an extraction procedure was implemented to select the best substrates and eluent. The central composite design acted to optimize the effects of parameters that influenced the extraction efficiencies. Results: For gallic and ascorbic acids, the limits of detection were obtained at 0.136 and 0.165 μM, respectively, with linear ranges of 0.6-125.2 and 0.5-106.8 μM, respectively. Conclusion: The substrate produced good extractions even after being used three-times and was successfully applied for the analysis of real samples.

Effective Solid Phase Extraction of Toxic Pyrrolizidine Alkaloids from Honey with Reusable Organosilyl-Sulfonated Halloysite Nanotubes

Pyrrolizidine alkaloids are plant secondary metabolites that have recently attracted attention as toxic contaminants in various foods and feeds as they are often harvested by accident. Furthermore, they prove themselves as hard to analyze due to their wide structural range and low concentration levels. However, even low concentrations show toxic behavior in the form of chronic liver diseases and possible carcinogenicity. Since sample preparation for this compound group is in need of more green and sustainable alternatives, modified halloysite nanotubes present an interesting approach. Based on the successful use of sulfonated halloysite nanotubes as inexpensive, easy-to-produce cation exchangers for solid phase extraction in our last work, this study deals with the further modification of the raw nanotubes and their performance in the solid phase extraction of pyrrolizidine alkaloids. Conducting already published syntheses of two organosilyl-sulfonated halloysite nanotubes, namely HNT-PhSO3H and HNT-MPTMS-SO3H, both materials were used as novel materials in solid phase extraction. After the optimization of the extraction protocol, extractions of aqueous pyrrolizidine alkaloid mixtures showed promising results with recoveries ranging from 78.3% to 101.3%. Therefore, spiked honey samples were extracted with an adjusted protocol. The mercaptopropyl-sulfonated halloysite nanotubes revealed satisfying loading efficiencies and recoveries. Validation was then performed, which displayed acceptable performance for the presented method. In addition, reusability studies using HNT-MPTMS-SO3H for solid phase extraction of an aqueous pyrrolizidine alkaloid mixture demonstrated excellent results over six cycles with no trend of recovery reduction or material depletion. Therefore, organosilyl-sulfonated halloysite nanotubes display a green, efficient and low-cost alternative to polymeric support in solid phase extraction of toxic pyrrolizidine alkaloids from complex honey matrix.

Bio-Inspired Hierarchical Carbon Nanotube Yarn with Ester Bond Cross-Linkages towards High Conductivity for Multifunctional Applications

The cross-linked hierarchical structure in biological systems provides insight into the development of innovative material structures. Specifically, the sarcoplasmic reticulum muscle is able to transmit electrical impulses in skeletal muscle due to its cross-linked hierarchical tubular cell structure. Inspired by the cross-linked tubular cell structure, we designed and built chemical cross-links between the carbon nanotubes within the carbon nanotube yarn (CNT yarn) structure by an esterification reaction. Consequently, compared with the pristine CNT yarn, its electrical conductivity dramatically enhanced 348%, from 557 S/cm to 1950 S/cm. Furthermore, when applied with three voltages, the electro-thermal temperature of esterified CNT yarn reached 261 °C, much higher than that of pristine CNT yarn (175 °C). In addition, the esterified CNT yarn exhibits a linear and stable piezo-resistive response, with a 158% enhanced gauge factor (the ratio of electrical resistance changing to strain change ~1.9). The superconductivity, flexibility, and stable sensitivity of the esterified flexible CNT yarn demonstrate its great potential in the applications of intelligent devices, smart clothing, or other advanced composites.

Nanostructure stable hydrophilic hierarchical porous metal-organic frameworks for highly efficient enrichment of glycopeptides

Protein glycosylation plays a vital role in many physiological activities in organisms. Due to the low abundance of glycopeptides and the interference of numerous non-glycopeptides in biological samples, selective enrichment of glycopeptides is of great significance for their successful identification. Metal organic frameworks (MOFs) materials are appropriate for glycopeptides enrichment by virtue of their large specific surface area and outstanding hydrophilic properties. However, the instability of hydrophilic MOFs in acidic solutions have severely limited their applications. In this work, a rational facile strategy was established to synthesize a stable hydrophilic hierarchical porous MOF (denoted as HP-MOF-Arg@mSiO₂). This new material improved the selectivity and sensitivity of enrichment for glycopeptides via modification of arginine groups. More importantly, the mesoporous silica layer was introduced to enhance the stability of MOFs in aqueous solution and achieve the size exclusion effect of large-size proteins in complex samples. Overall, owing to the unique hierarchical porous and the hydrophilic modification, the synthesized HP-MOF-Arg@mSiO₂ materials showed excellent hydrophilicity and hydrolytic stability, resulting in outstanding specific separation capacity in glycopeptides enrichment. A total of 521 and 342 glycopeptides were respectively captured from 2 μL human serum digests and mouse testis tissue digests, revealing the potential of the materials in the study of glycoproteomics in complex biological samples.

The Effect of Flow-Induced Vibration on Heat and Mass Transfer Performance of Hollow Fiber Membranes in the Humidification/Dehumidification Process

Cross-flow hollow fiber membranes are commonly applied in humidification/dehumidification. Hollow fiber membranes vibrate and deform under the impinging force of incoming air and the gravity of liquid in the inner tube. In this study, fiber deformation was caused by the pulsating flow of air. With varied pulsating amplitudes and frequencies, single-fiber deformation was investigated numerically using the fluid–structure interaction technique and verified with experimental data testing with a laser vibrometer. Then, the effect of pulsating amplitude and frequency on heat and mass transfer performance of the hollow fiber membrane was analyzed. The maximum fiber deformation along the airflow direction was far larger than that perpendicular to the flow direction. Compared with the case where the fiber did not vibrate, increasing the pulsation amplitude could strengthen Nu by 14–87%. Flow-induced fiber vibration could raise the heat transfer enhancement index from 13.8% to 80%. The pulsating frequency could also enhance the heat transfer of hollow fiber membranes due to the continuously weakened thermal boundary layer. With the increase in pulsating amplitude or frequency, the Sh number or E_m under vibrating conditions can reach about twice its value under non-vibrating conditions.

Fiber Nanoarchitectonics for Pre-Treatments in Facile Detection of Short-Chain Fatty Acids in Waste Water and Faecal Samples

Short-chain fatty acids (SCFAs) are among the active metabolites in biological process both in the intestinal tract and the bioconversion of organic wastes, which has resulted in various human diseases and environmental problems. In order to accurately detect SCFAs, we introduced a novel extraction sorbent. Electrospun polyacrylonitrile (PAN) nanofiber membrane was synthesized, then poly (3, 4-Ethylenedioxythiophene) (PEDOT) was deposited onto the surface of electrospun PAN nanofibers by in situ polymerization. The morphology of the composite PAN/PEDOT nanofiber was characterized by scanning electronic microscopy (SEM) and FTIR spectrum. PAN/PEDOT was used to isolate and concentrate the SCFAs in waste water and fecal samples before gas chromatography mass spectrometry (GC-MS) analysis. The analytical method was evaluated systematically, and low limits of detection (LODs) of 0.34–0.87 μg/L and good linearity (R² ≥ 0.9953) were obtained. The method was applied successfully for the determination of SCFAs in waste water and fecal samples, with good recovery (87.5–104.6%) and satisfactory reproducibility (relative standard deviation: 6.5–14.1%). The results indicated that the proposed method can be used as a potential approach for the determination of SCFAs with high sensitivity in waste water and biological samples.

Temperature-Responsive Magnetic Nanoparticles for Bioanalysis of Lysozyme in Urine Samples

Highly selective multifunctional magnetic nanoparticles containing a thermoresponsive polymer shell were developed and used in the sample pretreatment of urine for the assessment of lysozymuria in leukemia patients. Crosslinked poly(N-isopropylacrylamide-co-acrylic acid-co-N-tert-butylacrylamide) was grown onto silica-coated magnetic nanoparticles by reversible addition fragmentation chain transfer (RAFT) polymerization. The lysozyme binding property of the nanoparticles was investigated as a function of time, protein concentration, pH, ionic strength and temperature and their selectivity was assessed against other proteins. High-abundant proteins, like human serum albumin and γ-globulins did not interfere with the binding of lysozyme even at elevated concentrations characteristic of proteinuria. A sample cleanup procedure for urine samples has been developed utilizing the thermocontrollable protein binding ability of the nanoparticles. Method validation was carried out according to current bioanalytical method validation guidelines. The method was highly selective, and the calibration was linear in the 25 to 1000 µg/mL concentration range, relevant in the diagnosis of monocytic and myelomonocytic leukemia. Intra- and inter-day precision values ranged from 2.24 to 8.20% and 1.08 to 5.04%, respectively. Intra-day accuracies were between 89.9 and 117.6%, while inter-day accuracies were in the 88.8 to 111.0% range. The average recovery was 94.1 ± 8.1%. Analysis of unknown urine samples in comparison with a well-established reference method revealed very good correlation between the results, indicating that the new nanoparticle-based method has high potential in the diagnosis of lysozymuria.