Introducing an lsoprenaline Eluting Guidewire: Report on its Design and the Results of the Dose-Determining Pilot Study

Introduction: Retrograde intrarenal surgery (RIRS) is associated with complications, many of which are related to the intrarenal pressure (IRP). We aim to describe the design of a novel isoprenaline-eluting guidewire ("IsoWire") and present the results from the first in vitro release studies and the first animal studies showing its effect on IRP. Materials and Methods: The IsoWire comprises a Nitinol core surrounded by a stainless-steel wire wound into a tight coil. The grooves created by this coil provided a reservoir for adding a hydrogel coating into which isoprenaline, a beta-agonist, was loaded. Animal studies were performed using a porcine model. For the control, IRP, heart rate (HR), and mean arterial pressure (MAP) were measured continuously for 6 minutes with a standard guidewire in place. For the experiment, the standard hydrophilic guidewire was removed, the IsoWire was inserted into the renal pelvis, and the same parameters were measured. Results: In vitro analysis of the isoprenaline release profile showed that most (63.9 ± 5.9%) of the loaded drug mass was released in the 1st minute, and almost all of the drug was released in the first 4 minutes exponentially. Porcine studies showed a 25.1% reduction in IRP in the IsoWire that released 10 μg in the 1st minute; however, there was a marked increase in HR. The average percentage reduction in IRP was 8.95% and 21.3% in the IsoWire that released 5 and 7.5 μg of isoprenaline, respectively, with no changes in HR or MAP. Conclusions: The IsoWire, which releases 5 and 7.5 μg of isoprenaline in the 1st minute, appears to be safe and effective in reducing the IRP. Further studies are needed to establish whether the isoprenaline-induced ureteral relaxation will render easier insertion of a ureteral access sheath, reduce IRP during sheathless RIRS, or even promote the practice of sheathless RIRS.

Applications of Electrospun Drug-Eluting Nanofibers in Wound Healing: Current and Future Perspectives

Wounds are a consequence of disruption in the structure, integrity, or function of the skin or tissue. Once a wound is formed following mechanical or chemical damage, the process of wound healing is initiated, which involves a series of chemical signaling and cellular mechanisms that lead to regeneration and/or repair. Disruption in the healing process may result in complications; therefore, interventions to accelerate wound healing are essential. In addition to mechanical support provided by sutures and traditional wound dressings, therapeutic agents play a major role in accelerating wound healing. The medicines known to improve the rate and extent of wound healing include antibacterial, anti-inflammatory, and proliferation enhancing agents. Nonetheless, the development of these agents into eluting nanofibers presents the possibility of fabricating wound dressings and sutures that provide mechanical support with the added advantage of local delivery of therapeutic agents to the site of injury. Herein, the process of wound healing, complications of wound healing, and current practices in wound healing acceleration are highlighted. Furthermore, the potential role of drug-eluting nanofibers in wound management is discussed, and lastly, the economic implications of wounds as well as future perspectives in applying fiber electrospinning in the design of wound dressings and sutures are considered and reported.

Medical Devices: Definition, Classification, and Regulatory Implications

We propose the following definition of a medical device: "A contrivance designed and manufactured for use in healthcare, and not solely medicinal or nutritional." Current regulatory classifications of medical devices are complex and designed primarily for regulators. We propose a simpler classification, based on (1) the site of application of the device, (2) the time scale of its use, and (3) whether it has an external power source. The regulation of medical devices is less well developed than the regulation of medicinal products, which it could follow more closely. In particular, devices that incorporate medicines should be required to meet the same regulatory standards as medicinal products. This would remove the anomaly that some delivery systems that incorporate medicines are classified as devices while other similar systems that deliver the same medicines are classified as medicinal products. Some improvements might also result from more widespread use of registries, such as those used for prosthetic joint replacements. Registries would allow both a prospective examination of the performance of high-risk devices and a retrospective analysis when signals from other sources of information suggest problems. Those who apply for a marketing authorization for a new device should have to assure regulators of its quality of manufacture, safety, and efficacy before licensing. Even the most straightforward device should be shown to be useable in practice. Trials on patients, or at least simulations of use in the real world, should be practicable for most devices.

Bioinspired hydrogels for drug-eluting contact lenses

Efficient ocular drug delivery that can overcome the challenges of topical application has been largely pursued. Contact lenses (CLs) may act as light-transparent cornea/sclera bandages for prolonged drug release towards the post-lens tear fluid, if their composition and inner architecture are fitted to the features of the drug molecules. In this review, first the foundations and advantages of using CLs as ocular drug depots are revisited. Then, pros and cons of common strategies to prepare drug-loaded CLs are analyzed on the basis of recent examples, and finally the main section focuses on bioinspired strategies that can overcome some limitations of current designs. Most bioinspired strategies resemble a reverse engineering process to create artificial receptors for the drug inside the CL network by mimicking the human natural binding site of the drug. Related bioinspired strategies are being also tested for designing CLs that elute comfort ingredients mimicking the blinking-associated renewal of eye mucins. Other bioinspired approaches exploit the natural eye variables as stimuli to trigger drug release or take benefit of bio-glues to specifically bind active components to the CL surface. Overall, biomimicking approaches are being revealed as valuable tools to fit the amounts loaded and the release profiles to the therapeutic demands of each pathology. STATEMENT OF SIGNIFICANCE: Biomimetic and bioinspired strategies are remarkable tools for the optimization of drug delivery systems. Translation of the knowledge about how drugs interact with the natural pharmacological receptor and about components and dynamics of anterior eye segment may shed light on the design criteria for obtaining efficient drug-eluting CLs. Current strategies for endowing CLs with controlled drug release performance still require optimization regarding amount loaded, drug retained in the CL structure during storage, regulation of drug release once applied onto the eye, and maintenance of CL physical properties. All these limitations may be addressed through a variety of recently growing bioinspired approaches, which are expected to pave the way of medicated CLs towards the clinics.

Binary graft modification of polypropylene for anti-inflammatory drug-device combo products

Temperature- and pH-responsive copolymers were γ-ray grafted onto polypropylene (PP) to provide its surface with capability to load and to control the release of nonsteroidal anti-inflammatory drugs (NSAIDs) with the aim of being useful as component of drug-eluting medical devices. Poly(N,N'-dimethylaminoethylmethacrylate) (PDMAEMA) or poly(4-vinylpyridine) (P4VP) were grafted onto PP films via a direct method, and then poly(N-isopropylacrylamide) (PNIPAAm) was grafted applying a preirradiation method. The binary graft copolymers showed hemocompatibility and certain capability to adsorb albumin. (PP-g-DMAEMA)-g-NIPAAm exhibited higher affinity for ibuprofen and, particularly, diclofenac than (PP-g-4VP)-g-NIPAAm. Sustained release was observed under physiological conditions. Cytotoxicity and anti-inflammatory activity of NSAID-eluting (PP-g-DMAEMA)-g-NIPAAm films were evaluated on RAW 264.7 macrophage cells. First, dose dependence of anti-inflammatory activity and cytotoxicity of ibuprofen and diclofenac on RAW 264.7 cells were investigated to elucidate the ranges of drug concentration that the graft copolymers should provide. Optimal concentrations of diclofenac and ibuprofen at which they reduce inflammation while maintaining cell viability were determined to be 200 μg/mL and above 400 μg/mL in culture medium. Sequential grafting of DMAEMA and NIPAAm made PP surface to exhibit remarkably high affinity to diclofenac, being able to load and to regulate drug release fulfilling in vitro requirements to avoid inflammatory response.

Soft contact lenses for controlled ocular delivery: 50 years in the making

The use of contact lenses as ocular bandages for drug delivery was envisioned nearly 50 years ago by Wichterle and co-workers. Despite the therapeutic advantages that can be obtained, this application has to face up to the poor affinity shown by commercially available contact lenses for most ophthalmic drugs, resulting in small amounts of drug being loaded and short time of therapeutic levels in the eye structures. Novel strategies that appeared in the beginning of 21st century, for example coating lenses with vitamin E, incorporation of drug nanocarriers or application of molecular imprinting technology, are becoming relevant tools for development of true drug/contact lens combination products that may be available for ocular therapy in the foreseeable future.