Easy removal of nitrate and phosphate anions from water by low cost chitosan and activated charcoal

Presence of nitrate and phosphate ions is difficult to remove from the lakes, as they are highly soluble in water. A way of chemical method adopted to remove these ions from the drinking water using the simple method use of naturally abundant chitosan with charcoal. Adsorption of nitrate and phosphate anions from aqueous solution (water/waste water) on both the chitosan and activated charcoal was investigated. In batch mode adsorption study leads to developing efficient low-cost removal method is important to protect the aquatic environment from the high concentration of nitrate and phosphate anions intake as well as adverse effects on human health. The modified chitosan microspheres had a laudable performance for nitrate and phosphate adsorption Use of this material as an adsorbent is a cheaper and biocompatible method. A systematic study of the adsorption of nitrate and phosphate anions on chitosan and activated charcoal was performed by varying the pH, the initial concentration, contact time, and adsorbent dosage. The results demonstrate that the adsorption process was followed adsorption kinetics of both first and second order kinetics when we use of the chitosan and activated charcoal and chitosan is promising for treating water that is contaminated with nitrate and phosphate anions.

Preparation and Characterization of pH Sensitive Chitosan/3-Glycidyloxypropyl Trimethoxysilane (GPTMS) Hydrogels by Sol-Gel Method

pH responsive chitosan and 3-Glycidyloxypropyl trimethoxysilane (GPTMS) hydrogels were synthesized by the sol-gel crosslinking reaction. GPTMS was introduced to influence several behaviors of the chitosan hydrogels, such as the swelling ratio, mechanical properties, swelling thermodynamics, kinetics, and expansion mechanism. The functional groups of Chitosan/GPTMS hybrid hydrogels were verified by FT-IR spectrometer. Differential scanning calorimetry (DSC) and the thermogravimetric analysis (TGA) were used to analyzed the thermal behavior of water molecules, the expansion of thermodynamics, and the content of water molecules in the hydrogel. The results show that hydrogel consists of 50 wt.% GPTMS (CG50) and has good mechanical properties and sensitivity to pH response characteristics in the acidic/alkaline buffer solution. The increase of GPTMS content leads to the increase of hydrophobic groups in the hydrogel and causes the decrease of the overall water content and the freezing bond water content. When the hydrogels were immersed in acid solution, the interaction force parameter was smaller than that of DI-water and alkaline. It means that the interaction forces between hydrogel and water molecules are relatively strong. The swelling kinetics of hybrid hydrogels were investigated to inspect the swelling mechanism. The result is consistent with the Fisk’s diffusion mechanism, meaning that the rate of water penetration is adjustable. The biodegradable hydrogel (CG50) in this study has good environmental sensitivity and mechanical properties. It is suitable to be applied in the fields of drug release or biomedical technology.

Study of mesenchymal stem cells cultured on a poly(lactic-co-glycolic acid) scaffold containing simvastatin for bone healing

BACKGROUND

Tissue engineering is a promising alternative for the development of bone substitutes; for this purpose, three things are necessary: stem cells, a scaffold to allow tissue growth and factors that induce tissue regeneration.

METHODS

To congregate such efforts, we used the bioresorbable and biocompatible polymer poly(lactic-co-glycolic acid) (PLGA) as scaffold. For the osteoinductive factor, we used simvastatin (SIM), a drug with a pleiotropic effect on bone growth. Mesenchymal stem cells (MSCs) were cultured in PLGA containing SIM, and the bone substitute of PLGA/SIM/MSC was grafted into critical defects of rat calvaria.

RESULTS

The in vitro results showed that SIM directly interfered with the proliferation of MSC promoting cell death, while in the pure PLGA scaffold the MSC grew continuously. Scaffolds were implanted in the calvaria of rats and separated into groups: control (empty defect), PLGA pure, PLGA/SIM, PLGA/MSC and PLGA/SIM/MSC. The increase in bone growth was higher in the PLGA/SIM group.

CONCLUSIONS

We observed no improvement in the growth of bone tissue after implantation of the PLGA/SIM/MSC scaffold. As compared with in vitro results, our main hypothesis is that the microarchitecture of PLGA associated with low SIM release would have created an in vivo microenvironment of concentrated SIM that might have induced MSC death. However, our findings indicate that once implanted, both PLGA/SIM and PLGA/MSC contributed to bone formation. We suggest that strategies to maintain the viability of MSCs after cultivation in PLGA/SIM will contribute to improvement of bone regeneration.

Tartrate/tripolyphosphate as co-crosslinker for water soluble chitosan used in protein antigens encapsulation

In drug delivery research, several toxic chemical crosslinkers and non-toxic ionic crosslinkers have been exploited for the synthesis of microparticles from acetic acid soluble chitosan. This paper hypothesized the implementation of sodium potassium tartrate (SPT) as an alternative crosslinker for sodium tripolyphosphate (TPP) and SPT/TPP co-crosslinkers for synthesis of the microparticles using water soluble chitosan (WSC) for encapsulation of Bovine serum albumin (BSA) as a model protein, and Tetanus toxoid (TT) as a model vaccine. The crosslinking was confirmed by FT-IR, SEM with EDS. The XRD entailed molecular dispersion of proteins and thermal analysis confirmed the higher stability of STP/TPP co-crosslinked formulations. The resultant microparticles were exhibiting crosslinking degree (52-67%), entrapment efficiency (72-80%), particle size (0.3-1.7μm), zeta potential (+24 to 46mV) and mucoadhesion (41-68%). The superiority of SPT over TPP was confirmed by higher crosslinking degree and entrapment efficiency. However, co-crosslinking were advantageous in higher regression values for Langmuir adsorption isotherm, slower swelling tendency and extended 30days controlled in-vitro release study. TT release obeyed the Quasi-Fickian diffusion mechanism for single and cocrosslinked formulations. Overall, in crosslinking of chitosan as biological macromolecules, STP/TPP may be alternative for single ionic crosslinked formulations for protein antigen delivery.

Adsorption of chromium from aqueous solutions using crosslinked chitosan-diethylenetriaminepentaacetic acid

Chitosan (CH) and its derivatives have been the focus of attention for researchers as potential adsorbents for heavy metal removal. The adsorption potential of chitosan cross-linked with diethylenetriaminepentaacetic acid (CD) for Cr6+ was investigated. CD was characterized by FTIR, XRD, TGA, XPS and ESR techniques. Batch experiments were conducted to optimize the parameters affecting the adsorption of chromium. The optimum pH was found to be 3 and the adsorption process was found to be exothermic. Adsorption isotherms were determined and the maximum adsorption capacity of CD for chromium was found to be 192.3 mg/g which was higher than the adsorption capacity of the adsorbents reported in literature. The thermodynamic parameters, such as Gibbs free energy, changes in enthalpy and changes in entropy change were also evaluated. XPS and ESR studies revealed that Cr6+ adsorbed onto CD was reduced to Cr3+. The efficacy of CD for removal of Cr6+ from chrome plating effluent was demonstrated.

Interpenetrating polymer networks as innovative drug delivery systems

Polymers have always been valuable excipients in conventional dosage forms, also have shown excellent performance into the parenteral arena, and are now capable of offering advanced and sophisticated functions such as controlled drug release and drug targeting. Advances in polymer science have led to the development of several novel drug delivery systems. Interpenetrating polymer networks (IPNs) have shown superior performances over the conventional individual polymers and, consequently, the ranges of applications have grown rapidly for such class of materials. The advanced properties of IPNs like swelling capacity, stability, biocompatibility, nontoxicity and biodegradability have attracted considerable attention in pharmaceutical field especially in delivering bioactive molecules to the target site. In the past few years various research reports on the IPN based delivery systems showed that these carriers have emerged as a novel carrier in controlled drug delivery. The present review encompasses IPNs, their types, method of synthesis, factors which affects the morphology of IPNs, extensively studied IPN based drug delivery systems, and some natural polymers widely used for IPNs.

A proteomic view to characterize the effect of chitosan nanoparticle to hepatic cells: is chitosan nanoparticle an enhancer of PI3K/AKT1/mTOR pathway?

Chitosan nanoparticle, a biocompatible material, was used as a potential drug delivery system widely. Our current investigation studies were the bioeffects of the chitosan nanoparticle uptake by liver cells. In this experiment, the characterizations of chitosan nanoparticles were measured by transmission electron microscopy and particle size analyzer. The average size of the chitosan nanoparticle was 224.6 ± 11.2 nm, and the average zeta potential was +14.08 ± 0.7 mV. Moreover, using proteomic approaches to analyze the differential protein expression patterns resulted from the chitosan nanoparticle uptaken by HepG2 and CCL-13 cells identified several proteins involved in the PI3K/AKT1/mTOR pathway. Our experimental results have demonstrated that the chitosan nanoparticle may involve in the liver cancer cell metastasis and proliferation.