QbD-assisted optimisation of liposomes in chitosan gel for dermal delivery of aceclofenac as synergistic approach to combat pain and inflammation

Aceclofenac (ACE) is a drug that was precisely devised to circumvent the shortcomings associated with diclofenac. However, ACE too corresponds to nonsteroidal anti-inflammatory drug (NSAID)-related adverse effects, but with a lower amplitude. The present investigation seeks to develop liposomes loaded with ACE adopting a central composite design (CCD) and formulate a chitosan-based hydrogel for synergistic anti-inflammatory efficacy and improved ACE dermal administration. On the basis of preliminary vesicle size, Poly Dispersity Index (PDI), and drug entrapment, the composition of lipid, cholesterol, and vitamin E TPGS were chosen as independent variables. The formulation composition met the specifications for an optimum liposomal formulation, with total lipid concentration (13.5% w/w), cholesterol concentration (10% w/w), and surfactant concentration (2% w/w). With particle size and PDI of 174.22 ± 5.46 nm and 0.285 ± 0.01 respectively, the optimised formulation achieved an entrapment effectiveness of 92.08 ± 3.56%. Based on the CCD design, the optimised formulation Acec-Lipo opt was chosen and was subsequently transformed to a chitosan-based gel formulation for in vitro drug release, penetration through the skin, in vivo analgesic therapeutic activity, and skin irritation testing. % age oedema inhibition was found to be greatest with the Acec-Lipo opt gel formulation, followed by Acec gel. These results reinforce the notion that the inclusion of chitosan resulted in a synergistic effect despite the same strength of the drug. The findings suggested that Acec-Lipo incorporated in chitosan gel for skin targeting might be an effective formulation for topical ACE administration in clinical subjects.

Development and Optimization of Nanolipid-Based Formulation of Diclofenac Sodium: In Vitro Characterization and Preclinical Evaluation

In the present research study, we formulate bilosomes (BMs) of diclofenac (DC) for oral delivery for enhancement of therapeutic efficacy (anti-inflammatory disease). The BMS were prepared by thin film hydration method and optimized by Box−Behnken design (BBD) using cholesterol (A), lipid (B), surfactant (C), and bile salt (D) as formulation factors. Their effects were evaluated on vesicle size (Y1) and entrapment efficacy (Y2). The optimized DC-BMs-opt showed a vesicle size of 270.21 ± 3.76 nm, PDI of 0.265 ± 0.03, and entrapment efficiency of 79.01 ± 2.54%. DSC study result revealed that DC-BMs-opt exhibited complete entrapment of DC in BM matrix. It also depicted significant enhancement (p < 0.05) in release (91.82 ± 4.65%) as compared to pure DC (36.32 ± 4.23%) and DC-liposomes (74.54 ± 4.76%). A higher apparent permeability coefficient (2.08 × 10−3 cm/s) was also achieved compared to pure DC (6.6 × 10−4 cm/s) and DC-liposomes (1.33 × 10−3 cm/s). A 5.21-fold and 1.43-fold enhancement in relative bioavailability was found relative to pure DC and DC liposomes (DC-LP). The anti-inflammatory activity result showed a significant (p < 0.05) reduction of paw edema swelling compared to pure DC and DC-LP. Our findings revealed that encapsulation of DC in BMs matrix is a good alternative for improvement of therapeutic efficacy.

Topical transdermal chemoprevention of breast cancer: where will nanomedical approaches deliver us?

Despite the high incidence of breast cancer, there are few pharmacological prevention strategies for the high-risk population and those that are available have low adherence. Strategies that deliver drugs directly to the breasts may increase drug local concentrations, improving efficacy, safety and acceptance. The skin of the breast has been proposed as an administration route for local transdermal therapy, which may improve drug levels in the mammary tissue, due to both deep local penetration and percutaneous absorption. In this review, we discuss the application of nanotechnology-based strategies for the delivery of well established and new agents as well as drug repurposing using the topical transdermal route to improve the outcomes of preventive therapy for breast cancer.

Nanoliposome Precursors for Shape Modulation: Use of Heuristic Algorithm and QBD Principles for Encapsulating Phytochemicals

BACKGROUND

Screening of multiple methods is worthless for formulators due to material losses, wastage of time, and expenditures. It is imperative to make a quick decision.

OBJECTIVE

The present investigation describes the systematic approach to select the best suitable method for the development of nanoliposomes (NL), the precursor of nanocochleates encapsulating curcumin using Analytic Hierarchy Process (AHP).

METHODS

Pair-wise comparison matrices were used to achieve the overall priority weight and ranking for the selection of appropriate technique. Furthermore, Plackett-Burman screening Design (PBD) was exploited to investigate specific effects of associated formulation and process variables on particle size (Y1), drug content (Y2), and entrapment efficiency (Y3), while fabricating NL.

RESULTS

Results revealed the reliability of the pair-wise comparison matrices and selected the ethanol injection method with the highest priority weight (0.337). Bland-Altman plot and control chart validated the results of AHP. The preparation of vesicles with the preferred diameter and size distribution was essentially fulfilled. Stirring speed (X5), amount of phospholipid (X4), and cholesterol (X8) showed significant influence (p<0.05;) on Y1 and Y3, PBD revealed. These factors can be further optimized using the design of experiments.

CONCLUSION

AHP being an effective tool, has assisted in selecting the best alternative for fabricating NL, whilst PBD enabled a clear understanding of the effects of diverse formulation variables on responses studied. Results ensure that NL is a riveting candidate for modulating effectively into tailormade diverse shaped nanoformulations for further in vitro; and in vivo; studies.

Enhanced Ungual Permeation of Terbinafine HCl Delivered Through Liposome-Loaded Nail Lacquer Formulation Optimized by QbD Approach

The present investigation focused on developing, optimizing, and evaluating a novel liposome-loaded nail lacquer formulation for increasing the transungual permeation flux of terbinafine HCl for efficient treatment of onychomycosis. A three-factor, three-level, Box-Behnken design was employed for optimizing process and formulation parameters of liposomal formulation. Liposomes were formulated by thin film hydration technique followed by sonication. Drug to lipid ratio, sonication amplitude, and sonication time were screened as independent variables while particle size, PDI, entrapment efficiency, and zeta potential were selected as quality attributes for liposomal formulation. Multiple regression analysis was employed to construct a second-order quadratic polynomial equation and contour plots. Design space (overlay plot) was generated to optimize a liposomal system, with software-suggested levels of independent variables that could be transformed to desired responses. The optimized liposome formulation was characterized and dispersed in nail lacquer which was further evaluated for different parameters. Results depicted that the optimized terbinafine HCl-loaded liposome formulation exhibited particle size of 182 nm, PDI of 0.175, zeta potential of -26.8 mV, and entrapment efficiency of 80%. Transungual permeability flux of terbinafine HCl through liposome-dispersed nail lacquer formulation was observed to be significantly higher in comparison to nail lacquer with a permeation enhancer. The developed formulation was also observed to be as efficient as pure drug dispersion in its antifungal activity. Thus, it was concluded that the developed formulation can serve as an efficient tool for enhancing the permeability of terbinafine HCl across human nail plate thereby improving its therapeutic efficiency.

Stratum corneum modulation by chemical enhancers and lipid nanostructures: implications for transdermal drug delivery

Skin is the outermost and largest protective covering of the body. The uppermost layer of the skin, stratum corneum also called the horny layer is composed of keratin-filled cells covered by a lipid matrix which shields the skin from physical and chemical entrants. The lipid lamellar structure comprises of ceramides, cholesterol, fatty acids and proteins. Chemical enhancers that mimic the lamellar chemistry, reversibly fluidize the latter can be utilized for enhancing transport of cargo across the epidermis into the dermis. This review deals with the stratum corneum chemistry, mechanisms to modulate its packing with the aid of chemical enhancers, biophysical techniques for characterization and applications in the design of nature-inspired biocompatible lipid nanostructures for transdermal delivery of drugs and bioactive agents.

Preparation of transfersomes encapsulating sildenafil aimed for transdermal drug delivery: Plackett-Burman design and characterization

The aim of this work was to study the effect of different processing and formulation parameters on the preparation of sildenafil (SD) transfersomes utilizing the Plackett-Burman design. The drug to phospholipid molar ratio (X1), phospholipid to surfactant ratio (X2), hydrophilic-lipophilic balance of the surfactant (X3), hydration medium pH (X4), hydration time (X5) and the temperature of hydration (X6) were investigated to study their effect on the vesicle size (Y1) and entrapment efficiency (EE) of the drug (Y2). The preparation conditions were optimized to minimize the vesicle size and maximize the EE. The prepared transfersomes were also subjected to zeta potential measurements, morphological and physicochemical characterization. The combinations of factors that achieve the optimum desirability were identified. An optimized formulation was prepared and characterized once more for its vesicle size, EE, in vitro permeation and deformability index. The results revealed that both X3 and X6 had a pronounced effect on Y1, while X1 and X4 showed a significant effect on Y2. Morphological and physicochemical study confirmed the transfersomes spherical shape and compatibility of the formulation ingredients. The formulation with optimum desirability showed EE and vesicle size of 97.21% and 610 nm, respectively. In vitro permeation of the drug-loaded transfersome showed more than 5-fold higher permeation rate compared with drug suspension. Deformability index verified elasticity of the preparation. The significant variables could be optimized again to produce smaller vesicle size that could increase SD permeation from transdermal delivery systems loaded drug optimized transfersomes.

Transdermal nitroglycerin delivery using acrylic matrices: design, formulation, and in vitro characterization

Nitroglycerin (TNG) transdermal drug delivery systems (TDDSs) with different acrylic pressure-sensitive adhesives (PSAs) and chemical permeation enhancers (CPEs) were prepared. The effects of PSAs and CPEs types and concentrations on skin permeation and in vitro drug release from devices were evaluated using the dissolution method as well as the modified-jacketed Franz diffusion cells fitted with excised rat abdominal skin. It was demonstrated that the permeation rate or steady state flux (J_ss) of the drug through the excised rat skin was dependent on the viscosity and type of acrylic PSA as well as the type of CPE. Among different acrylic PSAs, Duro-Tak 2516 and Duro-Tak 2054 showed the highest and Duro-Tak 2051 showed the lowest J_ss. Among the various CPEs, propylene glycol and cetyl alcohol showed the highest and the lowest enhancement of the skin permeation of TNG, respectively. The adhesion properties of devices such as 180° peel strength and probe tack values were obtained. It was shown that increasing the concentration of CPE led to reduction in the adhesion property of PSA. Moreover, after optimization of the formulation, it was found that the use of 10% PG as a CPE and 25% nitroglycerin loading in Duro-Tak 2054 is an effective monolithic DIAP for the development of a transdermal therapeutic system for nitroglycerin.

Design and in vitro evaluation of transdermal patches based on ibuprofen-loaded electrospun fiber mats

To improve the poor compatibility among different components of Drug-in-adhesive type patch, two novel plasters (Drug-in-fiber and Drug-in-adhesive/fiber) were developed based on ibuprofen (IBU)-loaded fiber mats. These fibrous mats were fabricated via electrospinning of cellulose acetate/poly(vinylpyrrolidone) composites in a binary solvent of N,N-dimethyl acetamide/acetone. Physical status studies suggested that Drug-in-fiber could inhibit IBU re-crystallization, but the active ingredients were released at a relatively slow rate due to the dual-resistance of fiber mat and adhesive matrix. To overcome this shortcoming, Drug-in-adhesive/fiber was designed by coupling medicated hydrophilic pressure sensitive adhesive and IBU-loaded fiber mat. This method endowed Drug-in-adhesive/fiber a fast IBU release rate and high permeated drug amount though simulative skins. This design separated enhancer from adhesive matrix, which guaranteed Drug-in-adhesive/fiber excellent adhesion forces. Hence, the plasters based on medicated fiber mats improved the compatibility among patch components.