In vivo assessment of the three-dimensional haemodynamic micro-environment following drug-eluting bioresorbable vascular scaffold implantation in a human coronary artery: fusion of frequency domain optical coherence tomography and angiography

Coronary physiologic assessment based on angiography and intracoronary imaging

Despite the current evidence supporting clinical benefits of fractional flow reserve (FFR), its uptake in the cardiac catheterization laboratory has been slow due to procedural cost and increased time with the need for maximum hyperemia. Recently, novel physiological indices derived from coronary angiography and intracoronary imaging have emerged to overcome issues with a wire-based FFR. Angiography-based FFR can be measured without vessel instrumentation and has shown excellent diagnostic performance using wire-based FFR as the reference standard. Thus, angiography-based FFR may facilitate coronary functional assessment before and after percutaneous coronary intervention (PCI). Angiography-based index of microcirculatory resistance (IMR) is another new computational index for assessing the coronary microcirculation. Although angiography-derived IMR remains in an early phase of development and requires further validation, its less-invasive nature may help broaden the adoption of microvascular functional assessment in various conditions such as myocardial infarction and cardiac allograft vasculopathy. Lastly, computational FFR based on intravascular ultrasound and optical coherence tomography allows detailed lesion assessment from both morphological and functional standpoints. Given a growing interest in physiology-guided PCI optimization strategies, intravascular imaging-based FFR may become the main assessment tool to confirm successful PCI.

Fluid flow effects on the degradation kinetics of bioresorbable polymers

Implants, tissue engineering scaffolds made of biodegradable polymers are widely used in biomedical engineering. The degradation of polymers plays a critical role in the effectiveness of these applications. In this paper, the mechanism of the hydrolytic degradation affected by the flow medium is studied. The results indicate that both high porosity and dynamic conditions may significantly slow down degradation speed. A critical value of the Reynolds number is found to exist. When the Reynolds number is higher than the critical value, the autocatalysis was suppressed. The models reported in this article might serve as a guide to design 3D biodegradable implants.

Endothelial shear stress and vascular remodeling in bioresorbable scaffold and metallic stent

BACKGROUND AND AIMS

The impact of endothelial shear stress (ESS) on vessel remodeling in vessels implanted with bioresorbable scaffold (BRS) as compared to metallic drug-eluting stent (DES) remains elusive. The aim of this study was to determine whether the relationship between ESS and remodeling patterns differs in BRS from those seen in metallic DES at 3-year follow-up.

METHODS

In the ABSORB II randomized trial, lesions were investigated by serial coronary angiography and intravascular ultrasound (IVUS). Three-dimensional reconstructions of coronary arteries post-procedure and at 3 years were performed. ESS was quantified using non-Newtonian steady flow simulation. IVUS cross-sections in device segment were matched using identical landmarks.

RESULTS

Paired ESS calculations post-procedure and at 3 years were feasible in 57 lesions in 56 patients. Post-procedure, median ESS at frame level was higher in BRS than in DES, with marginal statistical significance (0.97 ± 0.48 vs. 0.75 ± 0.39 Pa, p = 0.063). In the BRS arm, vessel area and lumen area showed larger increases in the highest tercile of median ESS post-procedure as compared to the lowest tercile. In contrast, in DES, no significant relationship between median ESS post-procedure and remodeling was observed. In multivariate analysis, smaller vessel area, larger lumen area, higher plaque burden post-procedure, and higher median ESS post-procedure were independently associated with expansive remodeling in matched frames. Only in BRS, younger age was an additional significant predictor of expansive remodeling.

CONCLUSIONS

In a subset of lesions with large plaque burden, shear stress could be associated with expansive remodeling and late lumen enlargement in BRS, while ESS had no impact on vessel dimension in metallic DES.

Patient-Specific Modeling of Stented Coronary Arteries Reconstructed from Optical Coherence Tomography: Towards a Widespread Clinical Use of Fluid Dynamics Analyses

The recent widespread application of optical coherence tomography (OCT) in interventional cardiology has improved patient-specific modeling of stented coronary arteries for the investigation of local hemodynamics. In this review, the workflow for the creation of fluid dynamics models of stented coronary arteries from OCT images is presented. The algorithms for lumen contours and stent strut detection from OCT as well as the reconstruction methods of stented geometries are discussed. Furthermore, the state of the art of studies that investigate the hemodynamics of OCT-based stented coronary artery geometries is reported. Although those studies analyzed few patient-specific cases, the application of the current reconstruction methods of stented geometries to large populations is possible. However, the improvement of these methods and the reduction of the time needed for the entire modeling process are crucial for a widespread clinical use of the OCT-based models and future in silico clinical trials.

Local Hemodynamic Forces After Stenting: Implications on Restenosis and Thrombosis

Local hemodynamic forces are well-known to modulate atherosclerotic evolution, which remains one of the largest cause of death worldwide. Percutaneous coronary interventions with stent implantation restores blood flow to the downstream myocardium and is only limited by stent failure caused by restenosis, stent thrombosis, or neoatherosclerosis. Cumulative evidence has shown that local hemodynamic forces affect restenosis and the platelet activation process, modulating the pathophysiological mechanisms that lead to stent failure. This article first covers the pathophysiological mechanisms through which wall shear stress regulates arterial disease formation/neointima proliferation and the role of shear rate on stent thrombosis. Subsequently, the article reviews the current evidence on (1) the implications of stent design on the local hemodynamic forces, and (2) how stent/scaffold expansion can influence local flow, thereby affecting the risk of adverse events.

Assessing Computational Fractional Flow Reserve From Optical Coherence Tomography in Patients With Intermediate Coronary Stenosis in the Left Anterior Descending Artery

Background—

Intravascular optical coherence tomography (OCT) imaging provides limited information on the functional assessment of coronary stenosis. We evaluated a new approach to OCT image–based computation modeling, which can be used to estimate the fractional flow reserve (FFR) in patients with intermediate coronary stenosis.

Methods and Results—

Ninety-two patients with intermediate diameter stenosis in the left anterior descending artery underwent both FFR measurement with pressure wires and OCT examination. Using the OCT data, a computational fluid dynamics algorithm was used to calculate the computational FFR (FFR OCT ). The diagnostic performance of the FFR OCT was assessed based on the pressure wire–based FFR. The median FFR and FFR OCT values were 0.86 (0.79–0.89) and 0.89 (0.82–0.94), respectively. The average diameter stenosis in quantitative coronary angiography and area stenosis in OCT were 58.1±13.4% and 67.5±13.5%, respectively. The FFR OCT was better correlated to the FFR than were the anatomic variables ( r =0.72; P <0.001 versus r =0.46; P <0.001 for minimal luminal diameter on quantitative coronary angiography or r =0.57; P <0.001 for minimal lumen area on OCT). When functionally significant stenosis was defined as an FFR cutoff value of ≤0.8, FFR OCT resulted in 88.0% accuracy, 68.7% sensitivity, and 95.6% specificity. The positive and negative predictive values were 84.2% and 89.0%, respectively.

Conclusions—

The computation of FFR OCT enables assessment not only of anatomic information, but also of the functional significance of intermediate stenosis. This measurement may be a useful approach for the simultaneous evaluation of the functional and anatomic severity of coronary stenosis.

Quantitative assessment of the stent/scaffold strut embedment analysis by optical coherence tomography

The degree of stent/scaffold embedment could be a surrogate parameter of the vessel wall-stent/scaffold interaction and could have biological implications in the vascular response. We have developed a new specific software for the quantitative evaluation of embedment of struts by optical coherence tomography (OCT). In the present study, we described the algorithm of the embedment analysis and its reproducibility. The degree of embedment was evaluated as the ratio of the embedded part versus the whole strut height and subdivided into quartiles. The agreement and the inter- and intra-observer reproducibility were evaluated using the kappa and the interclass correlation coefficient (ICC). A total of 4 pullbacks of OCT images in 4 randomly selected coronary lesions with 3.0 × 18 mm devices [2 lesions with Absorb BVS and 2 lesions with XIENCE (both from Abbott Vascular, Santa Clara, CA, USA)] from Absorb Japan trial were evaluated by two investigators with QCU-CMS software version 4.69 (Leiden University Medical Center, Leiden, The Netherlands). Finally, 1481 polymeric struts in 174 cross-sections and 1415 metallic struts in 161 cross-sections were analyzed. Inter- and intra-observer reproducibility of quantitative measurements of embedment ratio and categorical assessment of embedment in Absorb BVS and XIENCE had excellent agreement with ICC ranging from 0.958 to 0.999 and kappa ranging from 0.850 to 0.980. The newly developed embedment software showed excellent reproducibility. Computer-assisted embedment analysis could be a feasible tool to assess the strut penetration into the vessel wall that could be a surrogate of acute injury caused by implantation of devices.