Loop-mediated isothermal amplification (LAMP) for rapid identification of Anopheles gambiae and Anopheles arabiensis mosquitoes

Evaluation of diffuse reflectance spectroscopy for predicting age, species, and cuticular resistance of Anopheles gambiae s.l under laboratory conditions

Mid-infrared spectroscopy (MIRS) combined with machine learning analysis has shown potential for quick and efficient identification of mosquito species and age groups. However, current technology to collect spectra is destructive to the sample and does not allow targeting specific tissues of the mosquito, limiting the identification of other important biological traits such as insecticide resistance. Here, we assessed the use of a non-destructive approach of MIRS for vector surveillance, micro diffuse reflectance spectroscopy (µDRIFT) using mosquito legs to identify species, age and cuticular insecticide resistance within the Anopheles gambiae s.l. complex. These mosquitoes are the major vectors of malaria in Africa and the focus on surveillance in malaria control programs. Legs required significantly less scanning time and showed more spectral consistence compared to other mosquito tissues. Machine learning models were able to identify An. gambiae and An. coluzzii with an accuracy of 0.73, two ages groups (3 and 10 days old) with 0.77 accuracy and we obtained accuracy of 0.75 when identifying cuticular insecticide resistance. Our results highlight the potential of different mosquito tissues and µDRIFT as tools for biological trait identification on mosquitoes that transmit malaria. These results can guide new ways of identifying mosquito traits which can help the creation of innovative surveillance programs by adapting new technology into mosquito surveillance and control tools.

Bionomics and ecology of Anopheles merus along the East and Southern Africa coast

Malaria transmission persists despite the scale-up of interventions such as long-lasting insecticide-treated nets (LLINs) and indoor residual spraying (IRS). Understanding the entomological drivers of transmission is key for the design of effective and sustainable tools to address the challenge. Recent research findings indicate a shift in vector populations from the notorious Anopheles gambiae (s.s.) as a dominant vector to other species as one of the factors contributing to the persistence of malaria transmission. However, there are gaps in the literature regarding the minor vector species which are increasingly taking a lead role in malaria transmission. Currently, minor malaria vectors have behavioural plasticity, which allows their evasion of vector control tools currently in use. To address this, we have reviewed the role of Anopheles merus, a saltwater mosquito species that is becoming an important vector of malaria transmission along the East and Southern African coast. We performed a literature review from PubMed and Google Scholar and reviewed over 50 publications relating to An. merus's bionomics, taxonomy, spatial-temporal distribution and role in malaria transmission. We found that An. merus is an important vector of malaria and that it contributes to residual malaria transmission because of its exophilic tendencies, insecticide resistance and densities that peak during the dry seasons as the freshwater mosquitoes decline. Spatial and temporal studies have also shown that this species has increased its geographical range, densities and vectorial capacity over time. In this review, we highlight the resting behaviour and breeding habitats of this mosquito, which could be targeted for surveillance studies and control interventions.

Rapid diagnosis of Ralstonia solanacearum infection sweet potato in China by loop-mediated isothermal amplification

Bacterial wilt of sweet potato is caused by Ralstonia solanacearum, which is distributed in southern China and causes significant economic losses each year. The pathogen is soil- and rhizome-borne, and thus its rapid detection may prevent the occurrence and spread of the disease. R. solanacearum has been listed as a quarantine disease in China. With the advent of molecular biology, many novel tools have been explored for the rapid identification of plant pathogens. In this study, a strain-specific detection method was developed for this specific pathogen that infects sweet potato using loop-mediated isothermal amplification (LAMP). A set of new LAMP-specific primers was designed from the orf428 gene, which can specifically detect the R. solanacearum bacterium that infect sweet potato. The LAMP reaction consisted of 8.0 mmol·L^-1Mg²⁺, 1.4 mmol·L^-1 dNTPs, and 0.32U μL^-1 Bst 2.0 DNA polymerase and was performed at 65 °C for 1 h. The amplification products were detected by visualizing a mixture of color changes using SYBR Green I dye and assessing ladder-like bands by electrophoresis. Our method has specificity, i.e., it only detected R. solanacearum in sweet potato, and it has high sensitivity, with a detection limit of 100 fg·μL^-1 genomic DNA and 10³ CFU·mL^-1 of bacterial fluid. In addition, R. solanacearum could be directly detected in infected sweet potato tissues without the need for DNA extraction. The LAMP method established in this study is a highly specific, sensitive, and rapid tool for the detection of bacterial wilt in sweet potato caused by R. solanacearum.

Loop-mediated isothermal amplification (LAMP) assays for Anopheles funestus group and Anopheles gambiae complex species

Species of the genus Anopheles vary with regard to their vector capacity for Plasmodium spp., the causative agent of malaria, and their accurate identification is often required. Loop-mediated isothermal amplification (LAMP) is a rapid, simple and low-cost method for specific DNA amplification. Primers for LAMP assays specific for the Anopheles funestus group and Anopheles gambiae complex species as well as for the species Anopheles arabiensis, An. funestus, An. gambiae s.s/Anopheles coluzzii (major vectors) and Anopheles rivulorum (minor vector) were designed targeting specific genome or rDNA internal transcribed spacer regions. Reaction conditions (buffer composition, primer concentrations, incubation time) were evaluated and the specificities of the assays confirmed with DNA from non-target Anopheles species. DNA release from the mosquitoes is achieved simply by heating them for 5 min in water. An aliquot of the DNA solutions is transferred to the reaction tube using disposable inoculation loops. The outcome of the LAMP amplifications after 1 h incubation at 65 °C can easily be visualized by a colour change visible to the naked eye. The assays are operable under field conditions requiring only basic equipment (portable heat block programmable at 65 and 80 °C, cooler for master mixes).

A LAMP assay for the detection of Bactrocera tryoni Queensland fruit fly (Diptera: Tephritidae)

LAMP assays are targeted molecular tests for the rapid detection of species in the laboratory and field. We developed a LAMP assay for an economically important fruit fly species, Queensland fruit fly, Bactrocera tryoni. This assay was assessed against a broad panel of target and non-target species and found to be specific, only amplifying the target species and closest relatives, in a portable real-time fluorometer (Genie III) in under 15 minutes with an anneal derivative temperature of 82.5 ^oC. The assay is sensitive to low levels of target DNA (>0.016 ng/µl), performing equally to the existing qPCR test. To enable retention of a physical voucher specimen, for potential morphological confirmation of LAMP results, a novel whole-specimen non-destructive DNA extraction method was developed, suitable for LAMP in the field. The stability of DNA extraction and LAMP reagents was tested under simulated and actual field conditions and shown to be robust. Our new assay now provides a portable molecular tool for the detection of this significant tephritid fruit fly pest species of biosecurity/quarantine concern. This has already proven invaluable for in-field diagnostics, providing real-time support influencing immediate actions, with negative results allowing the release of fruit produce, and positive results initiating fruit fly control measures.

In Situ Processing and Efficient Environmental Detection (iSPEED) of tree pests and pathogens using point-of-use real-time PCR

Global trade and climate change are responsible for a surge in foreign invasive species and emerging pests and pathogens across the world. Early detection and surveillance activities are essential to monitor the environment and prevent or mitigate future ecosystem impacts. Molecular diagnostics by DNA testing has become an integral part of this process. However, for environmental applications, there is a need for cost-effective and efficient point-of-use DNA testing to obtain accurate results from remote sites in real-time. This requires the development of simple and fast sample processing and DNA extraction, room-temperature stable reagents and a portable instrument. We developed a point-of-use real-time Polymerase Chain Reaction system using a crude buffer-based DNA extraction protocol and lyophilized, pre-made, reactions for on-site applications. We demonstrate the use of this approach with pathogens and pests covering a broad spectrum of known undesirable forest enemies: the fungi Sphaerulina musiva, Cronartium ribicola and Cronartium comandrae, the oomycete Phytophthora ramorum and the insect Lymantria dispar. We obtained positive DNA identification from a variety of different tissues, including infected leaves, pathogen spores, or insect legs and antenna. The assays were accurate and yielded no false positive nor negative. The shelf-life of the lyophilized reactions was confirmed after one year at room temperature. Finally, successful tests conducted with portable thermocyclers and disposable instruments demonstrate the suitability of the method, named in Situ Processing and Efficient Environmental Detection (iSPEED), for field testing. This kit fits in a backpack and can be carried to remote locations for accurate and rapid detection of pests and pathogens.

Loop-mediated isothermal amplification (LAMP) for the identification of invasive Aedes mosquito species

Invasive Aedes mosquito species (Diptera: Culicidae) are of public health concern in Europe because they are either recognized or potential vectors of pathogens. Loop-mediated isothermal amplification (LAMP) is a rapid and simple method for amplifying DNA with high specificity and efficiency, with the technique having potential for application in the field, including in high-throughput format. Specific LAMP assays based on rDNA internal transcribed spacers 1 or 2 sequences, considering intraspecies variability at these loci, were developed for Aedes aegypti, Aedes albopictus, Aedes japonicus, Aedes koreicus and the indigenous Aedes geniculatus. No such assays could be developed for Aedes atropalpus and Aedes triseriatus because both loci were too short to serve as target. The assays rely on the clearly visible colour change from violet to sky blue after successful amplification. Sensitivity of egg detection was confirmed with ratios of up to one mosquito egg in 99 other eggs. Simple sample preparation of adults or eggs by mechanical homogenization in water required an additional heat treatment or centrifugation step to avoid non-specific colour changes. Thus, further technical improvements are needed to render these assays truly field-applicable, which would greatly facilitate surveillance of these invasive mosquito species and allow for prompt implementation of control measures.

Direct nucleic acid analysis of mosquitoes for high fidelity species identification and detection of Wolbachia using a cellphone

Manipulation of natural mosquito populations using the endosymbiotic bacteria Wolbachia is being investigated as a novel strategy to reduce the burden of mosquito-borne viruses. To evaluate the efficacy of these interventions, it will be critical to determine Wolbachia infection frequencies in Aedes aegypti mosquito populations. However, current diagnostic tools are not well-suited to fit this need. Morphological methods cannot identify Wolbachia, immunoassays often suffer from low sensitivity and poor throughput, while PCR and spectroscopy require complex instruments and technical expertise, which restrict their use to centralized laboratories. To address this unmet need, we have used loop-mediated isothermal amplification (LAMP) and oligonucleotide strand displacement (OSD) probes to create a one-pot sample-to-answer nucleic acid diagnostic platform for vector and symbiont surveillance. LAMP-OSD assays can directly amplify target nucleic acids from macerated mosquitoes without requiring nucleic acid purification and yield specific single endpoint yes/no fluorescence signals that are observable to eye or by cellphone camera. We demonstrate cellphone-imaged LAMP-OSD tests for two targets, the Aedes aegypti cytochrome oxidase I (coi) gene and the Wolbachia surface protein (wsp) gene, and show a limit of detection of 4 and 40 target DNA copies, respectively. In a blinded test of 90 field-caught mosquitoes, the coi LAMP-OSD assay demonstrated 98% specificity and 97% sensitivity in identifying Ae. aegypti mosquitoes even after 3 weeks of storage without desiccant at 37°C. Similarly, the wsp LAMP-OSD assay readily identified the wAlbB Wolbachia strain in field-collected Aedes albopictus mosquitoes without generating any false positive signals. Modest technology requirements, minimal execution steps, simple binary readout, and robust accuracy make the LAMP-OSD-to-cellphone assay platform well suited for field vector surveillance in austere or resource-limited conditions.

Mosquitoes spread many human pathogens and novel approaches are required to reduce the burden of mosquito-borne disease. One promising approach is transferring Wolbachia into Aedes aegypti mosquitoes where it blocks transmission of arboviruses like dengue, Zika and Yellow fever viruses and spreads through mosquito populations. For effective evaluation of this approach, regular surveillance of Wolbachia infections in Ae. aegypti is required. However, current diagnostic tools, such as real time polymerase chain reaction, are not well suited to support these critical surveillance needs in resource poor settings due to their dependence on expensive instruments and technical expertise. To fill this need we developed a simple, robust and inexpensive assay to identify Ae. aegypti mosquitoes and Wolbachia using our unique one-pot assay platform, LAMP-OSD, which uses loop-mediated isothermal amplification to amplify nucleic acid targets at a single temperature. Unlike other LAMP-based tests, our assays assure accuracy by coupling amplification with novel nucleic acid strand displacement (OSD) probes that hybridize to specific sequences in LAMP amplification products and thereby generate simple yes/no readout of fluorescence readable by human eye and by off-the-shelf cellphones. To facilitate field use, we developed our assays so they are compatible with crushed mosquito homogenate as the template, meaning no nucleic acid extraction is required. In blinded tests using field collected mosquitoes, LAMP-OSD-cellphone tests performed robustly to identify 29 of 30 Ae. aegypti even after 3 weeks of storage at 37°C while producing only one false positive out of 60 non-specific mosquitoes. Similarly, our assay could identify Wolbachia in field-caught Aedes albopictus without producing any false positives. Our easy to use and easy to interpret assays should facilitate widespread field mosquito surveillance with minimal instrumentation and high accuracy.

A multiplex microfluidic loop-mediated isothermal amplification array for detection of malaria-related parasites and vectors

Malaria infection poses a great threaten to public health even nowadays. The conventional diagnosis tools of malaria parasites and vectors require systematic training for the observers accompanied by the low throughput. In this study, a new detection system, i.e., multiplex microfluidic loop-mediated isothermal amplification (mμLAMP) array, was developed to provide a convenient, rapid and economical detection system for malaria diagnosis. A microfluidic-based detection chip was designed and developed, targeting the conserved gene of four Anopheles and two Plasmodium species responsible for most of the malaria cases occurred in China. The DNA preparation of Anopheles and Plasmodium samples was realized by using a newly-developed DNA extraction method. For this mμLAMP array system, the detection limit was determined to be 1pg of targeting DNA with high sensitivity (>95%) and specificity (100%). Further, the accuracy of such mμLAMP analysis was evaluated by the analysis of 48 Anopheles mosquito samples, of which 30 were termed to be target Anopheles, displaying high consistency with that by morphological analysis. In conclusion, the mμLAMP detection system was proved to be a visible, sensitive, specific and high-throughput diagnostic tool. Considering the portable manipulation of such detection system, our studies shed light on its potential application of malaria surveillance on the spot.

Recent Progress in the Development of Diagnostic Tests for Malaria

The impact of malaria on global health has continually prompted the need to develop effective diagnostic strategies. In malaria endemic regions, routine diagnosis is hampered by technical and infrastructural challenges to laboratories. These laboratories lack standard facilities, expertise or diagnostic supplies; thus, therapy is administered based on clinical or self-diagnosis. There is the need for accurate diagnosis of malaria due to the continuous increase in the cost of medication, and the emergence and spread of drug resistant strains. However, the widely utilized Giemsa-stained microscopy and immunochromatographic tests for malaria are liable to several drawbacks, including inadequate sensitivity and false-positive outcomes. Alternative methods that offer improvements in performance are either expensive, have longer turnaround time or require a level of expertise that makes them unsuitable for point-of-care (POC) applications. These gaps necessitate exploration of more efficient detection techniques with the potential of POC applications, especially in resource-limited settings. This minireview discusses some of the recent trends and new approaches that are seeking to improve the clinical diagnosis of malaria.

Sex determination in the wild: a field application of loop-mediated isothermal amplification successfully determines sex across three raptor species

PCR-based methods are the most common technique for sex determination of birds. Although these methods are fast, easy and accurate, they still require special facilities that preclude their application outdoors. Consequently, there is a time lag between sampling and obtaining results that impedes researchers to take decisions in situ and in real time considering individuals' sex. We present an outdoor technique for sex determination of birds based on the amplification of the duplicated sex-chromosome-specific gene Chromo-Helicase-DNA binding protein using a loop-mediated isothermal amplification (LAMP). We tested our method on Griffon Vulture (Gyps fulvus), Egyptian Vulture (Neophron percnopterus) and Black Kite (Milvus migrans) (family Accipitridae). We introduce the first fieldwork procedure for sex determination of animals in the wild, successfully applied to raptor species of three different subfamilies using the same specific LAMP primers. This molecular technique can be deployed directly in sampling areas because it only needs a voltage inverter to adapt a thermo-block to a car lighter and results can be obtained by the unaided eye based on colour change within the reaction tubes. Primers and reagents are prepared in advance to facilitate their storage at room temperature. We provide detailed guidelines how to implement this procedure, which is simpler (no electrophoresis required), cheaper and faster (results in c. 90 min) than PCR-based laboratory methods. Our successful cross-species application across three different raptor subfamilies posits our set of markers as a promising tool for molecular sexing of other raptor families and our field protocol extensible to all bird species.

Emerging tools for identification of arthropod vectors

The rapid and reliable identification of arthropod vector species is an essential component of the fight against vector-borne diseases. However, owing to the lack of entomological expertise required for the morphological identification method, development of alternative and complementary tools is needed. This review describes the main methods used for arthropod identification, focusing on the emergence of protein profiling using MALDI-TOF MS technology. Sample preparation, analysis of reproducibility, database creation and blind tests for controlling accuracy of this tool for arthropod identification are described. The advantages and limitations of the MALDI-TOF MS method are illustrated by emphasizing different hematophagous arthropods, including mosquitoes and ticks, the top two main vectors of infectious diseases.

Detection of G119S ace-1 (R) mutation in field-collected Anopheles gambiae mosquitoes using allele-specific loop-mediated isothermal amplification (AS-LAMP) method

BACKGROUND

Malaria vectors have developed resistance to the four families of insecticides available for public health purposes. For example, the kdr mutation is associated with organochlorines and pyrethroids resistance. It is of particular concern that organophosphate and carbamate resistance associated with the G119S ace-1 (R) mutation has recently increased in West Africa in extent and frequency, and is now spreading through the Anopheles gambiae malaria vector population. There is an urgent need to improve resistance management using existing insecticides and new tools to quickly assess resistance level for rapid decision-making.

METHODS

DNA extracted from field-collected mosquitoes was used to develop the method. Specific primers were designed manually to match the mutation region and an additional mismatched nucleotide in the penultimate position to increase specificity. Other primers used are common to both wild and mutant types. The allele specific (AS)-LAMP method was compared to the PCR restriction fragment length polymorphism (PCR-RFLP) and real-time PCR (RT-PCR) methods using the genomic DNA of 104 field-collected mosquitoes.

RESULTS

The primers designed for LAMP were able to distinguish between the wild type (ace-1 (S) ) and mutated type allele (ace-1 (R) ). Detection time was 50 min for the wild type homozygous and 64 min for the heterozygous. No amplification of the resistant allele took place within the 75-min test period when using the wild type primers. For the ace-1 (R) resistant type, detection time was 51 min for the resistant homozygous and 55 min for the heterozygous. No amplification of the wild type allele took place within the 75-min test period when using the resistant type primers. Gel electrophoresis of LAMP products confirmed that amplification was primer-DNA specific, i.e., primers could only amplify their target specific DNA. AS-LAMP, PCR-RFLP, and RT-PCR showed no significant difference in the sensitivity and specificity of their ace-1 (R) detection ability.

CONCLUSIONS

The AS-LAMP method could detect the ace-1 (R) mutation within 60 min, which is faster than conventional PCR-RFLP. This method may be used to quickly detect the ace-1 (R) mutation for rapid decision-making, even in less well-equipped laboratories.

Rapid discrimination between Anopheles gambiae s.s. and Anopheles arabiensis by High-Resolution Melt (HRM) analysis

There is a need for more cost-effective options to more accurately discriminate among members of the Anopheles gambiae complex, particularly An. gambiae and Anopheles arabiensis. These species are morphologically indistinguishable in the adult stage, have overlapping distributions, but are behaviorally and ecologically different, yet both are efficient vectors of malaria in equatorial Africa. The method described here, High-Resolution Melt (HRM) analysis, takes advantage of minute differences in DNA melting characteristics, depending on the number of incongruent single nucleotide polymorphisms in an intragenic spacer region of the X-chromosome-based ribosomal DNA. The two species in question differ by an average of 13 single-nucleotide polymorphisms giving widely divergent melting curves. A real-time PCR system, Bio-Rad CFX96, was used in combination with a dsDNA-specific dye, EvaGreen, to detect and measure the melting properties of the amplicon generated from leg-extracted DNA of selected mosquitoes. Results with seven individuals from pure colonies of known species, as well as 10 field-captured individuals unambiguously identified by DNA sequencing, demonstrated that the method provided a high level of accuracy. The method was used to identify 86 field mosquitoes through the assignment of each to the two common clusters with a high degree of certainty. Each cluster was defined by individuals from pure colonies. HRM analysis is simpler to use than most other methods and provides comparable or more accurate discrimination between the two sibling species but requires a specialized melt-analysis instrument and software.

Identification of cryptic Anopheles mosquito species by molecular protein profiling

Vector control is the mainstay of malaria control programmes. Successful vector control profoundly relies on accurate information on the target mosquito populations in order to choose the most appropriate intervention for a given mosquito species and to monitor its impact. An impediment to identify mosquito species is the existence of morphologically identical sibling species that play different roles in the transmission of pathogens and parasites. Currently PCR diagnostics are used to distinguish between sibling species. PCR based methods are, however, expensive, time-consuming and their development requires a priori DNA sequence information. Here, we evaluated an inexpensive molecular proteomics approach for Anopheles species: matrix assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). MALDI-TOF MS is a well developed protein profiling tool for the identification of microorganisms but so far has received little attention as a diagnostic tool in entomology. We measured MS spectra from specimens of 32 laboratory colonies and 2 field populations representing 12 Anopheles species including the A. gambiae species complex. An important step in the study was the advancement and implementation of a bioinformatics approach improving the resolution over previously applied cluster analysis. Borrowing tools for linear discriminant analysis from genomics, MALDI-TOF MS accurately identified taxonomically closely related mosquito species, including the separation between the M and S molecular forms of A. gambiae sensu stricto. The approach also classifies specimens from different laboratory colonies; hence proving also very promising for its use in colony authentication as part of quality assurance in laboratory studies. While being exceptionally accurate and robust, MALDI-TOF MS has several advantages over other typing methods, including simple sample preparation and short processing time. As the method does not require DNA sequence information, data can also be reviewed at any later stage for diagnostic or functional patterns without the need for re-designing and re-processing biological material.

Anopheles salivary gland proteomes from major malaria vectors

Background

Antibody responses against Anopheles salivary proteins can indicate individual exposure to bites of malaria vectors. The extent to which these salivary proteins are species-specific is not entirely resolved. Thus, a better knowledge of the diversity among salivary protein repertoires from various malaria vector species is necessary to select relevant genus-, subgenus- and/or species-specific salivary antigens. Such antigens could be used for quantitative (mosquito density) and qualitative (mosquito species) immunological evaluation of malaria vectors/host contact. In this study, salivary gland protein repertoires (sialomes) from several Anopheles species were compared using in silico analysis and proteomics. The antigenic diversity of salivary gland proteins among different Anopheles species was also examined.

Results

In silico analysis of secreted salivary gland protein sequences retrieved from an NCBInr database of six Anopheles species belonging to the Cellia subgenus (An. gambiae, An. arabiensis, An. stephensi and An. funestus) and Nyssorhynchus subgenus (An. albimanus and An. darlingi) displayed a higher degree of similarity compared to salivary proteins from closely related Anopheles species. Additionally, computational hierarchical clustering allowed identification of genus-, subgenus- and species-specific salivary proteins. Proteomic and immunoblot analyses performed on salivary gland extracts from four Anopheles species (An. gambiae, An. arabiensis, An. stephensi and An. albimanus) indicated that heterogeneity of the salivary proteome and antigenic proteins was lower among closely related anopheline species and increased with phylogenetic distance.

Conclusion

This is the first report on the diversity of the salivary protein repertoire among species from the Anopheles genus at the protein level. This work demonstrates that a molecular diversity is exhibited among salivary proteins from closely related species despite their common pharmacological activities. The involvement of these proteins as antigenic candidates for genus-, subgenus- or species-specific immunological evaluation of individual exposure to Anopheles bites is discussed.

Rapid identification of Chikungunya and Dengue virus by a real-time reverse transcription-loop-mediated isothermal amplification method

Both Chikungunya and Dengue virus belong to the acute arthropod-borne viruses. Because of the lack of specific symptoms, it is difficult to distinguish the two infections based on clinical manifestations. To identify and quantitatively detect Chikungunya and Dengue viruses, a real-time accelerated reverse-transcription-loop-mediated isothermal amplification (RT-LAMP) platform was developed, and 26-confirmed RNA samples, 42 suspects, and 18 healthy serum samples were evaluated by the method. The RT-polymerase chain reaction (PCR) and cDNA sequencing were used as references. The results showed that it could identify the Chikungunya and Dengue virus RNA correctly in all antibody-positive samples within 1 hour, without any cross-reactions. The virus load of the positive samples was quantitatively detected with a turbidimeter. The sensitivity was 100% and specificity was 95.25%. The findings indicate that the RT-LAMP is an effective method for rapid quantity detection of Chikungunya virus and Dengue virus in serum samples with convenient operation, high specificity, and high sensitivity.

A low-cost microfluidic chip for rapid genotyping of malaria-transmitting mosquitoes

BACKGROUND

Vector control is one of the most effective measures to prevent the transmission of malaria, a disease that causes over 600,000 deaths annually. Around 30-40 Anopheles mosquito species are natural vectors of malaria parasites. Some of these species cannot be morphologically distinguished, but have behavioral and ecological differences. Emblematic of this is the Anopheles gambiae species complex. The correct identification of vector species is fundamental to the development of control strategies and epidemiological studies of disease transmission.

METHODOLOGY/PRINCIPAL FINDINGS

An inexpensive, disposable, field-deployable, sample-to-answer, microfluidic chip was designed, constructed, and tested for rapid molecular identification of Anopheles gambiae and Anopheles arabiensis. The chip contains three isothermal amplification reactors. One test reactor operates with specific primers to amplify Anopheles gambiae DNA, another with specific primers for Anopheles arabiensis DNA, and the third serves as a negative control. A mosquito leg was crushed on an isolation membrane. Two discs, laden with mosquito tissue, were punched out of the membrane and inserted into the two test chambers. The isolated, disc-bound DNA served as a template in the amplification processes. The amplification products were detected with intercalating fluorescent dye that was excited with a blue light-emitting diode. The emitted light was observed by eye and recorded with a cell-phone camera. When the target consisted of Anopheles gambiae, the reactor containing primers specific to An. gambiae lit up while the other two reactors remained dark. When the target consisted of Anopheles arabiensis, the reactor containing primers specific to An. arabiensis lit up while the other two reactors remained dark.

CONCLUSIONS/SIGNIFICANCE

The microfluidic chip provides a means to identify mosquito type through molecular analysis. It is suitable for field work, allowing one to track the geographical distribution of mosquito populations and community structure alterations due to environmental changes and malaria intervention measures.

Loop-mediated isothermal amplification for rapid identification of biotypes B and Q of the globally invasive pest Bemisia tabaci, and studying population dynamics

BACKGROUND

Bemisia tabaci, the sweetpotato whitefly, is a globally invasive pest that causes serious agricultural damage by transmitting plant viruses. This pest forms a cryptic species complex that displays morphologically indistinguishable biotypes. Among them, the B and Q biotypes are the most important pests worldwide. Because they have different levels of insecticide resistance, these biotypes must be identified in order to achieve proper pest control. Therefore, a convenient, rapid and specific detection method for identifying the two biotypes is necessary.

RESULTS

Loop-mediated isothermal amplification (LAMP) was employed for rapid identification of B. tabaci B and Q biotypes. By combining a quick DNA extraction method, identification of the two biotypes was achieved within 1 h of detection time. The LAMP assay was applied to study the dynamics of B. tabaci biotypes both in the field and in greenhouses. It was found that, while temperature may be important for population dynamics of the whitefly in the field, population dynamics in greenhouse conditions may be influenced by the types of insecticide.

CONCLUSION

The newly designed LAMP assay is a simple, rapid and accurate method for identifying the B and Q biotypes. It can be conducted by non-specialists and can contribute to pest management.

Development of an allele-specific, loop-mediated, isothermal amplification method (AS-LAMP) to detect the L1014F kdr-w mutation in Anopheles gambiae s. l

Background

Malaria control relies heavily on treated bed nets and indoor residual spraying with pyrethroid insecticides. Unfortunately, the resistance to pyrethroid insecticides, mainly due to the kdr mutation, is spreading in the main malaria vector Anopheles gambiae s.l., decreasing the insecticides’ efficacy. To manage the insecticide resistance rapidly and flexibly, simple and effective tools for the early detection of resistant mosquitoes are needed. This study aimed to develop an allele-specific, loop-mediated, isothermal amplification (AS-LAMP) method to detect the West African-type kdr mutation (kdr-w; L1014F) in field-collected mosquitoes.

Methods

DNA fragments of the wild-type and the mutated kdr gene were used to select the primers and develop the method. The primers were designed with the mutation at the 5’ end of the backward inner primer (BIP). The AS-LAMP method was compared to the AS-PCR method using the genomic DNA of 120 field-collected mosquitoes.

Results

The AS-LAMP method could discriminate between the wild-type homozygote, the heterozygote, and the kdr-w homozygote within 75 min. The AS-LAMP method has the advantage of being faster and at least as sensitive and specific as the AS-PCR method.

Conclusions

The AS-LAMP method can be used to detect the kdr mutation for quick decision-making, even in less well-equipped laboratories.

LAMP-based method for a rapid identification of Legionella spp. and Legionella pneumophila

Legionella pneumophila is accounted for more than 80% of Legionella infection. However it is difficult to discriminate between the L. pneumophila and non-L. pneumophila species rapidly. In order to detect the Legionella spp. and distinguish L. pneumophila from Legionella spp., a real-time loop-mediated isothermal amplification (LAMP) platform that targets a specific sequence of the 16S rRNA gene was developed. LS-LAMP amplifies the fragment of the 16S rRNA gene to detect all species of Legionella genus. A specific sequence appears at the 16S rRNA gene of L. pneumophila, while non-L. pneumophila strains have a variable sequence in this site, which can be recognized by the primer of LP-LAMP. In the present study, 61 reference strains were used for the method verification. We found that the specificity was 100% for both LS-LAMP and LP-LAMP, and the sensitivity of LAMP assay for L. pneumophila detection was between 52 and 5.2 copies per reaction. In the environmental water samples detection, a total of 107 water samples were identified by the method. The culture and serological test were used as reference methods. The specificity of LS-LAMP and LP-LAMP for the samples detection were 91.59% (98/107) and 93.33% (56/60), respectively. The sensitivity of LS-LAMP and LP-LAMP were 100% (51/51) and 100% (18/18). The results suggest that real-time LAMP, as a new assay, provides a specific and sensitive method for rapid detection and differentiation of Legionella spp. and L. pneumophila and should be utilized to test environmental water samples for increased rates of detection.

Instrument-free nucleic acid amplification assays for global health settings

Many infectious diseases that affect global health are most accurately diagnosed through nucleic acid amplification and detection. However, existing nucleic acid amplification tests are too expensive and complex for most low-resource settings. The small numbers of centralized laboratories that exist in developing countries tend to be in urban areas and primarily cater to the affluent. In contrast, rural area health care facilities commonly have only basic equipment and health workers have limited training and little ability to maintain equipment and handle reagents.¹ Reliable electric power is a common infrastructure shortfall. In this paper, we discuss a practical approach to the design and development of non-instrumented molecular diagnostic tests that exploit the benefits of isothermal amplification strategies. We identify modular instrument-free technologies for sample collection, sample preparation, amplification, heating, and detection. By appropriately selecting and integrating these instrument-free modules, we envision development of an easy to use, infrastructure independent diagnostic test that will enable increased use of highly accurate molecular diagnostics at the point of care in low-resource settings.