Evaluation of the solar water disinfection process (SODIS) against Cryptosporidium parvum using a 25-L static solar reactor fitted with a compound parabolic collector (CPC)

Influence of Environmental Pollution and Living Conditions on Parasite Transmission among Indigenous Ecuadorians

The purpose of this study was to evaluate the influence of environmental pollution and the living conditions of indigenous Ecuadorians on the transmission of enteroparasites in an Andean agricultural area located at high altitude. Environmental pollution was recorded after observation in each community. The parasites were identified by microscopic sediment analysis using physiological saline solution from macerated arthropods, washed vegetables, and human stools, utilizing four coproparasitological techniques (direct examination, Kato–Katz, ether concentration, and Ziehl–Neelsen). The results show that the inadequate disposal of human and animal excreta that contaminate soil and water, incorrect food hygiene, inadequate sanitary infrastructure in houses, a lack of animal veterinary care, and rodent proliferation are important reservoirs of zoonotic parasites. The use of excrement as fertilizer increases the number of flies, which act as mechanical vectors, and vegetables grown in areas with disperse infective parasitic forms act as vehicles that are marketed at the local, regional, and international levels. These analyses verify contamination levels of 52.7% in mechanical vectors, 70.6% in vegetables, and 98.2% in human stools. The agricultural communities analyzed maintained poor hygienic–sanitary and environmental conditions, which had a significant influence on the transmission of enteroparasites that affect human health.

Cryptosporidium spp. and Giardia spp. (oo)cysts as target-organisms in sanitation and environmental monitoring: A review in microscopy-based viability assays

Cysts and (oo)cysts are the infective forms of parasitic protozoa, as Giardia and Cryptosporidium, which are widespread and associated to worldwide waterborne diseases outbreaks. These microorganisms pose a challenge to public health, as they are resistant to conventional disinfection methods, which make them important parameters when evaluating inactivation efficiency. However, when (oo)cysts are targets, it is challenging to infer inactivation efficacy, as it may require infectivity tests that are not often an option for laboratory routine analysis. In this scene, (oo)cyst viability based on induced excystation, membrane integrity and enzyme activity evaluated by dye inclusion and/or exclusion, as well as fluorescence reduction consist on microscopy-based techniques that may be options to estimate inactivation in the environmental context. This scoping review presents applications, advantages and limitations of these methodologies for viability assessment, in order to shed light on the (oo)cyst viability topic and provide insight strategies for choosing protocols in the environmental and sanitation field, in laboratory applications and novel research.

Solar water disinfection with parabolic and flat reflectors

Solar water disinfection (SODIS) is a process by which microbially contaminated water is disinfected by transmitting solar ultraviolet radiation to the water, rendering the bacteria inactive. The purpose of this project was to determine a residence time for disinfection in specific applications using a 3-log reduction in colony-forming units per milliliter (CFU/mL). The water was contained in quartz tubes and tested over both flat and parabolic reflectors. While UVA and UVB radiation are diffuse and independent of reflector style, water temperature is affected by solar concentration. The two reflector styles were studied to identify how insolation level and temperature affects the bacteria inactivation process. Escherichia coli, DH5α, was inoculated into sterile water and treated for 2, 4, and 8 h. The study had several conclusions, first that a 5-log reduction was achieved after 2 h, for all water temperature and insolation levels. The reflector style did not have a measurable effect on inactivation due to the short disinfection time, but the water temperature increased significantly with the parabolic reflectors. A thermal model of the two systems confirmed that the parabolic configuration resulted in higher energy input, making it the preferred configuration for disinfection with lower residence times.

Sunlight-mediated inactivation of health-relevant microorganisms in water: a review of mechanisms and modeling approaches

Health-relevant microorganisms present in natural surface waters and engineered treatment systems that are exposed to sunlight can be inactivated by a complex set of interacting mechanisms. The net impact of sunlight depends on the solar spectral irradiance, the susceptibility of the specific microorganism to each mechanism, and the water quality; inactivation rates can vary by orders of magnitude depending on the organism and environmental conditions. Natural organic matter (NOM) has a large influence, as it can attenuate radiation and thus decrease inactivation by endogenous mechanisms. Simultaneously NOM sensitizes the formation of reactive intermediates that can damage microorganisms via exogenous mechanisms. To accurately predict inactivation and design engineered systems that enhance solar inactivation, it is necessary to model these processes, although some details are not yet sufficiently well understood. In this critical review, we summarize the photo-physics, -chemistry, and -biology that underpin sunlight-mediated inactivation, as well as the targets of damage and cellular responses to sunlight exposure. Viruses that are not susceptible to exogenous inactivation are only inactivated if UVB wavelengths (280-320 nm) are present, such as in very clear, open waters or in containers that are transparent to UVB. Bacteria are susceptible to slightly longer wavelengths. Some viruses and bacteria (especially Gram-positive) are susceptible to exogenous inactivation, which can be initiated by visible as well as UV wavelengths. We review approaches to model sunlight-mediated inactivation and illustrate how the environmental conditions can dramatically shift the inactivation rate of organisms. The implications of this mechanistic understanding of solar inactivation are discussed for a range of applications, including recreational water quality, natural treatment systems, solar disinfection of drinking water (SODIS), and enhanced inactivation via the use of sensitizers and photocatalysts. Finally, priorities for future research are identified that will further our understanding of the key role that sunlight disinfection plays in natural systems and the potential to enhance this process in engineered systems.

The effect of SODIS water treatment intervention at the household level in reducing diarrheal incidence among children under 5 years of age: a cluster randomized controlled trial in Dabat district, northwest Ethiopia

BACKGROUND

Solar Disinfection (SODIS) of water is an economical, user-friendly, and environmentally safe household water treatment method that has been advocated as a means of decreasing the burden of diarrhea among children under 5 years of age. Laboratory studies have consistently shown the efficacy of the SODIS method to destroy waterborne pathogens. However, the evidence-based health effect of a SODIS intervention at the household level is limited. The main aim of the study was to examine the effectiveness of a SODIS intervention in reducing the incidence of diarrhea among under-five children.

METHODS

A community-based, cluster randomized controlled trial was conducted, over 6 months from 10 January to 7 July 2016, in 28 rural villages of northwest Ethiopia. In the intervention group, 384 children in 279 households received polyethylene terephthalate (PET) bottles, and in the control group 394 children in 289 households who continued to use their usual drinking-water sources were included in the trial. The study compared diarrheal incidence among the intervention group children who were exposed to SODIS household water treatment and the control group children who were not exposed to such water treatment. A generalized estimating equation (GEE) model was used to compute the adjusted incidence rate ratio and the corresponding 95% confidence interval.

RESULTS

In this trial, the overall SODIS compliance was 90.6%. The incidence of diarrhea was 8.3 episodes/100 person-week observations in the intervention group compared to 15.3 episodes/100 person-week observations in the control group. A statistically significant reduction was observed in the incidence of diarrhea in the intervention group compared to the control (adjusted IRR 0.60 (95% CI 0.52, 0.70) with a corresponding prevention of 40% (95% CI: 34, 48).

CONCLUSION

The SODIS intervention substantially reduced the incidence of diarrhea among under-five children in a rural community of northwest Ethiopia. This indicates that a SODIS intervention is an invaluable strategy that needs to be integrated with the National Health Extension Program to be addressed to rural communities.

TRIAL REGISTRATION

Clinical Trial Registry India, ID: CTRI/2017/09/009640 . Registered retrospectively on 5 September 2017.

Assessing viability and infectivity of foodborne and waterborne stages (cysts/oocysts) of Giardia duodenalis, Cryptosporidium spp., and Toxoplasma gondii: a review of methods

Giardia duodenalis, Cryptosporidium spp. and Toxoplasma gondii are protozoan parasites that have been highlighted as emerging foodborne pathogens by the Food and Agriculture Organization of the United Nations and the World Health Organization. According to the European Food Safety Authority, 4786 foodborne and waterborne outbreaks were reported in Europe in 2016, of which 0.4% were attributed to parasites including Cryptosporidium, Giardia and Trichinella. Until 2016, no standardized methods were available to detect Giardia, Cryptosporidium and Toxoplasma (oo)cysts in food. Therefore, no regulation exists regarding these biohazards. Nevertheless, considering their low infective dose, ingestion of foodstuffs contaminated by low quantities of these three parasites can lead to human infection. To evaluate the risk of protozoan parasites in food, efforts must be made towards exposure assessment to estimate the contamination along the food chain, from raw products to consumers. This requires determining: (i) the occurrence of infective protozoan (oo)cysts in foods, and (ii) the efficacy of control measures to eliminate this contamination. In order to conduct such assessments, methods for identification of viable (i.e. live) and infective parasites are required. This review describes the methods currently available to evaluate infectivity and viability of G. duodenalis cysts, Cryptosporidium spp. and T. gondii oocysts, and their potential for application in exposure assessment to determine the presence of the infective protozoa and/or to characterize the efficacy of control measures. Advantages and limits of each method are highlighted and an analytical strategy is proposed to assess exposure to these protozoa.

Inactivation of exogenous endoparasite stages by chemical disinfectants: current state and perspectives

Chemical disinfection is common practice and inevitable to achieve sufficient control over parasites particularly in intensive animal housing systems. To identify suitable chemicals, reliable data on antiparasitic efficacy of disinfectants are required. This review summarizes recently published experience with procedures applied to evaluate the viability of a variety of endoparasites following physical or chemical stress. It is concluded that laboratory models used to assess antiparasitic efficacy of e.g. commercial disinfectants should consider the most resistant stages of both helminths and protozoa, i.e. ascarid eggs and coccidia oocysts. To ensure reproducibility and transparency, standardized protocols are pivotal. Such protocols are established on a national level (e.g. DVG guidelines in Germany); however, internationally accepted certification procedures are currently lacking.

Speeding up the solar water disinfection process (SODIS) against Cryptosporidium parvum by using 2.5l static solar reactors fitted with compound parabolic concentrators (CPCs)

Water samples of 0, 5, and 100 nephelometric turbidity units (NTU) spiked with Cryptosporidium parvum oocysts were exposed to natural sunlight in 2.5l static borosilicate solar reactors fitted with two different compound parabolic concentrators (CPCs), CPC1 and CPC1.89, with concentration factors of the solar radiation of 1 and 1.89, respectively. The global oocyst viability was calculated by the evaluation of the inclusion/exclusion of the fluorogenic vital dye propidium iodide and the spontaneous excystation. Thus, the initial global oocyst viability of the C. parvum isolate used was 95.3 ± 1.6%. Using the solar reactors fitted with CPC1, the global viability of oocysts after 12h of exposure was zero in the most turbid water samples (100 NTU) and almost zero in the other water samples (0.3 ± 0.0% for 0 NTU and 0.5 ± 0.2% for 5 NTU). Employing the solar reactors fitted with CPC1.89, after 10h exposure, the global oocyst viability was zero in the non-turbid water samples (0 NTU), and it was almost zero in the 5 NTU water samples after 8h of exposure (0.5 ± 0.5%). In the most turbid water samples (100 NTU), the global viability was 1.9 ± 0.6% after 10 and 12h of exposure. In conclusion, the use of these 2.5l static solar reactors fitted with CPCs significantly improved the efficacy of the SODIS technique as these systems shorten the exposure times to solar radiation, and also minimize the negative effects of turbidity. This technology therefore represents a good alternative method for improving the microbiological quality of household drinking water in developing countries.

Thin-film fixed-bed reactor for solar photocatalytic inactivation of Aeromonas hydrophila: influence of water quality

BACKGROUND

Controlling fish disease is one of the major concerns in contemporary aquaculture. The use of antibiotics or chemical disinfection cannot provide a healthy aquaculture system without residual effects. Water quality is also important in determining the success or failure of fish production. Several solar photocatalytic reactors have been used to treat drinking water or waste water without leaving chemical residues. This study has investigated the impact of several key aspects of water quality on the inactivation of the pathogenic bacterium Aeromonas hydrophila using a pilot-scale thin-film fixed-bed reactor (TFFBR) system.

RESULTS

The level of inactivation of Aeromonas hydrophila ATCC 35654 was determined using a TFFBR with a photocatalytic area of 0.47 m(2) under the influence of various water quality variables (pH, conductivity, turbidity and colour) under high solar irradiance conditions (980-1100 W m(-2)), at a flow rate of 4.8 L h(-1) through the reactor. Bacterial enumeration were obtained through conventional plate count using trypticase soy agar media, cultured in conventional aerobic conditions to detect healthy cells and under ROS-neutralised conditions to detect both healthy and sub-lethally injured (oxygen-sensitive) cells. The results showed that turbidity has a major influence on solar photocatalytic inactivation of A. hydrophila. Humic acids appear to decrease TiO(2) effectiveness under full sunlight and reduce microbial inactivation. pH in the range 7-9 and salinity both have no major effect on the extent of photoinactivation or sub-lethal injury.

CONCLUSIONS

This study demonstrates the effectiveness of the TFFBR in the inactivation of Aeromonas hydrophila under the influence of several water quality variables at high solar irradiance, providing an opportunity for the application of solar photocatalysis in aquaculture systems, as long as turbidity remains low.