Effects of Polyvinylpyrrolidone and Ethyl Cellulose in Polyurethane Electrospun Nanofibers on Morphology and Drug Release Characteristics

Novel Saccharomyces cerevisiae-Loaded Polyvinylpyrrolidone/SiO2 Nanofiber for Wound Dressing Prepared Using Electrospinning Method

Electrospun nanofibers have been used as wound dressings to protect skin from infection and promote wound healing. In this study, we developed polyvinylpyrrolidone (PVP)/silicon dioxide (SD) composite nanofibers for the delivery of probiotic Saccharomyces cerevisiae (SC), which potentially aids in wound healing. PVP/SD composite nanofibers were optimized through electrospinning, and bead-free nanofibers with an average diameter of 624.7 ± 99.6 nm were fabricated. Next, SC, a wound-healing material, was loaded onto the PVP/SD composite nanofibers. SC was encapsulated in nanofibers, and nanofibers were prepared using SC, PVP, SD, water, and ethanol in a ratio of 3:4:0.1:4.8:1.2. The formation of smooth nanofibers with protrusions around SC was confirmed using SEM. Nanofiber dressing properties were physicochemically and mechanically characterized by evaluating SEM, DSC, XRD, and FTIR images, tensile strength, and elongation at break. Additionally, a release test of active substances was performed. The absence of interactions between SC, PVP, and SD was confirmed through physicochemical evaluation, and SEM images showed that the nanofiber dressing contained SC and had a porous structure. It also showed a 100% release of SC within 30 min. Overall, our study showed that SC-loaded PVP/SD composite nanofibers prepared using the electrospinning method are promising wound dressings.

Exploring temperature-responsive drug delivery with biocompatible fatty acids as phase change materials in ethyl cellulose nanofibers

This study introduces a novel temperature-responsive drug delivery system using ethyl cellulose (EC) nanofibers encapsulating a eutectic mixture of lauric acid/stearic acid (LA/SA) as phase change materials (PCMs) and Rhodamine B (RhB) as a model drug. Employing blend electrospinning, the nanofibers achieved controlled drug release responsive to temperature changes. The peak shift of the carbonyl group in FTIR analysis confirmed drug-polymer compatibility, while the absence of RhB peaks in the XRD and DSC assessments revealed RhB's amorphous distribution within the fibers. Our findings demonstrate that RhB release is dependent on its loading, with a slow initial release (<2 %) for 1 % and 5 % RhB loadings and a burst release (~12 %) for 10 % loading. Notably, the release rate was tunable at 37 °C by adjusting LA/SA concentration. The optimal LA/SA loading for temperature-responsive release is identified as 10 %. Over 240 h, there is a 32 % increase in RhB release at 37 °C, and an additional 8 % increase at 40 °C, compared to 25 °C. This research illustrates the potential of PCM-integrated nanofibers in smart drug delivery, particularly for chemotherapy, antibiotics, and anti-inflammatory drugs, showcasing an innovative approach to improving therapeutic efficiency while reducing side effects.

Nanofibers: A current era in drug delivery system

Nanofibers have a large area of surface variable 3D topography, porosity, and adaptable surface functions. Several researchers are researching nanofiber technology as a potential solution to the current problems in several fields. It manages cardiovascular disorders, infectious diseases, gastrointestinal tract-associated diseases, neurodegenerative diseases, pain treatment, contraception, and wound healing. The nanofibers are fabricated using various fabrication techniques, such as electrospinning, phase separation, physical Fabrication, and chemical fabrication. Depending on their intended use, nanofibers are manufactured using a variety of polymers. It comprises natural polymers, semi-synthetic polymers, synthetic polymers, metals, metal oxides, ceramics, carbon, nonporous materials, mesoporous materials, hollow structures, core-shell structures, biocomponents, and multi-component materials. Nanofiber composites are a good alternative for targeted gene delivery, protein and peptide delivery, and growth factor delivery. Thus, nanofibers have huge potential in drug delivery, which enables them to be used for various applications and can revolutionize these therapeutic areas. This review systematically studied nanofibers' history, advantages, disadvantages, types, and polymers used in nanofiber technology. Further, polymers and their types used in the preparation of nanofibers were summarised. Mainly review article focuses on the fabrication method, i.e., electrospinning and its types. Finally, the article discussed the applications and recent advancements of nanofabrication technology.

Waste acrylonitrile butadiene styrene (ABS) incorporated with polyvinylpyrrolidone (PVP) for potential water filtration membrane

Acrylonitrile butadiene styrene (ABS) is one of the most common fused-filament feedstocks for 3D printing. The rapid growth of the 3D printing industry has resulted in huge demand for ABS filaments; however, it generates a large amount of waste. This study developed a novel method using waste ABS to fabricate electrospun nanofiber membranes (ENMs) for water filtration. Polyvinylpyrrolidone (PVP) was employed to modify the properties of waste ABS, and the effect of PVP addition in the range of 0-5 wt% was investigated. The results showed that adding PVP increased the viscosity and surface tension but decreased the conductivity of the precursor solution. After electrospinning, PVP could reduce the number of beads, increase the porosity and fiber diameter, and improve the wettability of the fabricated fibers. Moreover, the bilayer of ABS ENMs achieved a high flux value between 2951 and 48 041 L m^-2 h^-1 and a high rejection rate of 99%. Our study demonstrates a sustainable strategy to convert waste plastics to inexpensive materials for wastewater treatment membranes.

A new study of dynamic mechanical analysis and the microstructure of polyurethane foams filled

Polyurethane foams have good shock-absorbing properties. This article discusses the study of the physical, dynamic analysis, and microstructure of filled polyurethane foams (PUR). We used mineral fillings nanoparticles of titanium dioxide (TiO2) and calcium carbonate (C1) to support and strengthen the foam cell structure to develop shock absorption and thermal resistance properties. Dynamic mechanical analysis (DMA) and compression tests compared the mechanic characterization results with different modelling approaches. For studies of physicochemical properties, we used differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). We deduced the flame retardancy mechanism. It appears that a detailed description of the characteristics of viscosity and yield stress must take into consideration the filler's size in comparison to the cell wall's size. The effect of size distribution on the foam's microstructure was given by scanning electron microscopy (SEM). Half-open spherical cells were shown to be reduced in size with filling. The filler diffusion in polyurethane foams was used to model the composite foam. We observed that crystalline filler particles were uniformly distributed in the matrix, indicating that the total size is related to the density and is a crucial metric for the level of reinforcement.

Role of Nanofibers in Encapsulation of the Whole Cell

In the field of biomaterial research, the electrospinning device is now used to manufacture nanofibers that can be used to encapsulate whole microorganisms such as bacterial cells, funguses, viruses, and even spores. The nanofiber encapsulated cells will have greater significance in the coming future because of their wide variety of applications in various fields. Nanofibers act as microorganism reservoir systems that enhance their properties such as viability, controlled release of products, biomedical applications, and bioremediation. The effect of electrostatic forces on a droplet of liquid polymer or polymer solution is based on electrospinning. Electrospun nanofibers act as ideal native extracellular matrices for microorganisms and have also had a tremendous advantage in drug delivery systems where modern research is still underway. During electrospinning, nearly all microorganisms may be inserted into a polymer matrix that forms a composite nanofiber. The evolution in electrospinning technique over the past few decades has become promising. New ideas have been generated to enhance the techniques and improve the overall applications and properties of nanofibers. This technique has been transformed by the advent of the electrospinning machine. The electrospun nanofibers can be chemically characterized by a wide variety of procedures such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR). Electrospinning has various applications, for example, in wastewater treatment, tissue engineering, food industry, drug delivery, agriculture, and cosmetics. Nanofiber encapsulation of microorganisms increased the shelf life of the microorganisms; the cells remain viable for months. It also helps in the control release of bacterial products. The present review demonstrates the role of nanofiber in the encapsulation of the whole cell.