Microbial shelf life determination of vacuum-packaged fresh beef treated with polylactic acid, lactic acid, and nisin solutions

Utilization of Yeast Extract as a Flavor Enhancer and Masking Agent in Sodium-Reduced Marinated Shrimp

Deepwater pink shrimp (Parapenaus longirostris) has a significantly high catch yield and is a highly important food source for human nutrition in terms of its nutritional value. The reduction of salt content in seafood products while preserving taste poses a significant challenge. The aim of this study is to reduce the NaCl ratio used in the shrimp marination process by substituting it with KCl and masking the resulting bitterness from KCl using natural flavor enhancers, such as yeast extracts. The marinated shrimp were prepared using 50% KCl instead of 50% NaCl. In order to mask the bitter taste caused by KCl and enhance the flavor, two different types of yeast extracts obtained from Saccharomyces cerevisiae were utilized in the formulation. Nutritional composition, Na and K contents, amino acid composition, color measurement, bacteriological quality, pH changes, and sensory evaluations were conducted to assess the impact of salt reduction and yeast extracts on the sensory, chemical, and physical attributes of the products. L-glutamic acid, L-alanine, L-aspartic acid, L-leucine, L-valine, and L-lysine were found to be higher in samples with Levex Terra yeast extract. Despite a 50% reduction in NaCl content, the addition of yeast extract led to an increase in the umami taste due to the elevation of amino acids present. Yeast extracts can offer a promising solution for enhancing the sensory qualities of seafood products with reduced salt content by conducting more detailed sensory development examinations.

Bacteriocin: A natural approach for food safety and food security

The call to cater for the hungry is a worldwide problem in the 21st century. Food security is the utmost prime factor for the increasing demand for food. Awareness of human health when using chemical preservatives in food has increased, resulting in the use of alternative strategies for preserving food and enhancing its shelf-life. New preservatives along with novel preservation methods have been instigated, due to the intensified demand for extended shelf-life, along with prevention of food spoilage of dairy products. Bacteriocins are the group of ribosomally synthesized antimicrobial peptides; they possess a wide range of biological activities, having predominant antibacterial activity. The bacteriocins produced by the lactic acid bacteria (LAB) are considered to be of utmost importance, due to their association with the fermentation of food. In recent times among various groups of bacteriocins, leaderless and circular bacteriocins are gaining importance, due to their extensive application in industries. These groups of bacteriocins have been least studied as they possess peculiar structural and biosynthetic mechanisms. They chemically possess N-to-C terminal covalent bonds having a predominant peptide background. The stability of the bacteriocins is exhibited by the circular structure. Up till now, very few studies have been performed on the molecular mechanisms. The structural genes associated with the bacteriocins can be combined with the activity of various proteins which are association with secretion and maturation. Thus the stability of the bacteriocins can be used effectively in the preservation of food for a longer period of time. Bacteriocins are thermostable, pH-tolerant, and proteolytically active in nature, which make their usage convenient to the food industry. Several research studies are underway in the domain of biopreservation which can be implemented in food safety and food security.

Microbial biopreservatives for controlling the spoilage of beef and lamb meat: their application and effects on meat quality

Biopreservation is a recognized natural method for controlling the growth of undesirable bacteria on fresh meat. It offers the potential to inhibit spoilage bacteria and extend meat shelf-life, but this aspect has been much less studied compared to using the approach to target pathogenic bacteria. This review provides comprehensive information on the application of biopreservatives of microbial origin, mainly bacteriocins and protective cultures, in relation to bacterial spoilage of beef and lamb meat. The sensory effect of these biopreservatives, an aspect that often receives less attention in microbiological studies, is also reviewed. Microbial biopreservatives were found to be able to retard the growth of the major meat spoilage bacteria, Brochothrix thermosphacta, Pseudomonas spp., and Enterobacteriaceae. Their addition did not have any discernible negative impact on the sensory properties of meat, whether assessed by human sensory panels or instrumental and chemical analyses. Although results are promising, the concept of biopreservation for controlling spoilage bacteria on fresh meat is still in its infancy. Studies in this area are still lacking, especially for lamb. Biopreservatives need more testing under conditions representative of commercial meat production, along with studies of any possible sensory effects, in order to validate their potential for large-scale industrial applications.

Effect of Extended Hanging Time on the Microbial Quality of Pork Carcasses and Blade Steaks

To evaluate the effect of extended post-harvest hanging time on pork carcass sides (n = 20), aerobic plate count (APC), Enterobacteriaceae, yeast and mold populations, pH, and moisture content were determined. Pork carcasses were sampled on d 1, 7, 14, and 21 to determine their microbial quality from the lean tissue of 3 anatomical locations, the flank, shoulder, and jowl. After the 21-d extended hanging time, pork shoulder butts (n = 17) (Institutional Meat Purchase Specifications #406; USDA Agricultural Marketing Service, 2014) were fabricated from these carcasses into 2.54-cm pork blade steaks. Pork blade steaks were vacuum packaged, stored up to 35 d at 0°C ± 1°C, and evaluated for APC, Enterobacteriaceae, yeast and mold populations, and pH on d 0, 7, 14, 21, 28, and 35. Pork carcass surface moisture content declined (P < 0.01) from 65.1% on d 1 to 50.5% on d 21. The carcass pH was similar (P > 0.42) at 5.88 on d 1, 7, and 14; however, the pH declined (P < 0.05) to 5.72 at d 21. Pork carcass APC populations remained relatively low during the extended hanging time; however, the jowl had the highest (P < 0.05) APC populations among all anatomical locations. In addition, the proportion of yeast populations above the detection limit for the jowl was found to be greatest (P < 0.05) compared to the flank and the shoulder. Pork blade steak APC population was 5.06 log colony-forming units/g (CFU/g) on d 35; however, these counts were below 108 log CFU/g, which is when meat is considered spoiled. There was a day effect for Enterobacteriaceae and mold populations (P < 0.05). These results indicate that pork carcasses and vacuum-packaged steaks fabricated from pork carcasses have acceptable microbial quality when they undergo an extended hanging time.

Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review

Poly(lactic acid) (PLA), so far, is the most extensively researched and utilized biodegradable aliphatic polyester in human history. Due to its merits, PLA is a leading biomaterial for numerous applications in medicine as well as in industry replacing conventional petrochemical-based polymers. The main purpose of this review is to elaborate the mechanical and physical properties that affect its stability, processability, degradation, PLA-other polymers immiscibility, aging and recyclability, and therefore its potential suitability to fulfill specific application requirements. This review also summarizes variations in these properties during PLA processing (i.e. thermal degradation and recyclability), biodegradation, packaging and sterilization, and aging (i.e. weathering and hygrothermal). In addition, we discuss up-to-date strategies for PLA properties improvements including components and plasticizer blending, nucleation agent addition, and PLA modifications and nanoformulations. Incorporating better understanding of the role of these properties with available improvement strategies is the key for successful utilization of PLA and its copolymers/composites/blends to maximize their fit with worldwide application needs.

Super-chilling (-0.7°C) with high-CO2 packaging inhibits biochemical changes of microbial origin in catfish (Clarias gariepinus) muscle during storage

Controlled freezing-point storage (CFPS) is an emerging preservative technique desirable for fish. In the present study, catfish fillets were stored at -0.7°C under different packaging atmospheres: air (AP), vacuum (VP), and 60% CO2/40% N2 (MAP). Chemical, microbiological, and sensory analyses were performed during storage. Results showed the following descending order of chemical changes (degradation of nucleotides, conversion of protein to volatile-based nitrogen and biogenic amines, and production of trimethylamine nitrogen), as well as loss of sensory properties: 4°C AP>-0.7°C AP≈4°C VP>-0.7°C VP≈4°C MAP>-0.7°C MAP. The chemical changes were well-correlated with microbial growth suggesting the microbiological pathways. Hence, CFPS at -0.7°C in combination with high-CO2 MAP can effectively maintain the quality of fresh catfish meat compared to traditional preservation methods.

Applications of Ozone, Bacteriocins and Irradiation in Food Processing: A Review

An article is presented describing the background information on the use of ozone, bacteriocins and irradiation for destroying pathogens in food products. Their effectiveness on some pathogens of importance in food processing systems and issues of concern are highlighted. It could be concluded that although each one has the potential for use as an alternative preservation technology in specific food processing applications, no single method, except irradiation, is likely to be effective against all food spoilage and food poisoning microorganisms in all food matrices. However, the synergistic effect of one of these methods and other 'hurdles' or modes of food preservations could be used to ensure the microbial safety and prevention of the development of undesirable sensory and chemical changes in some food products. Bacteriocins may contribute an additional barrier in the 'hurdle concept' of food safety.

Antimicrobial potential of immobilized Lactococcus lactis subsp. lactis ATCC 11454 against selected bacteria

Immobilization of living cells of lactic acid bacteria could be an alternative or complementary method of immobilizing organic acids and bacteriocins and inhibit undesirable bacteria in foods. This study evaluated the inhibition potential of immobilized Lactococcus lactis subsp. lactis ATCC 11454 on selected bacteria by a modified method of the agar spot test. L. lactis was immobilized in calcium alginate (1 to 2%)-whey protein concentrate (0 and 1%) beads. The antimicrobial potential of immobilized L. lactis was evaluated in microbiological media against pathogenic bacteria (Escherichia coli, Salmonella, and Staphylococcus aureus) or Pseudomonas putida, a natural meat contaminant, and against seven gram-positive bacteria used as indicator strains. Results obtained in this study indicated that immobilized L. lactis inhibited the growth of S. aureus, Enterococcus faecalis, Enterococcus faecium, Lactobacillus curvatus, Lactobacillus sakei, Kocuria varians, and Pediococcus acidilactici. Only 4 h of incubation at 35 degrees C resulted in a clear inhibition zone around the beads that increased with time. With the addition of 10 mM of a chelating agent (EDTA) to the media, results showed growth inhibition of E. coli; however, P. putida and Salmonella Typhi were unaffected by this treatment. These results indicate that immobilized lactic acid bacteria strains can be successfully used to produce nisin and inhibit bacterial growth in semisolid synthetic media.

Combined effects of lactic acid and nisin solution in reducing levels of microbiological contamination in red meat carcasses

Changes in bacterial counts on beef carcasses at specific points during slaughter and fabrication were determined, and the effectiveness of nisin, lactic acid, and a combination of the lactic acid and nisin in reducing levels of microbiological contamination was assessed. Swab samples were obtained from the surfaces of randomly selected beef carcasses. Carcasses were swabbed from the neck, brisket, and renal site after skinning, splitting, and washing. Treatments involving lactic acid (1.5%), nisin (500 IU/ml), or a mixture of nisin and lactic acid were applied after the neck area was washed. A control group was not sprayed. Results indicated that the highest prevalence of aerobic plate counts (APCs), total coliforms, and Escherichia coli was found in the neck site after splitting, and the lowest level of microbial contamination was found after skinning. Washing with water did not significantly reduce the bacterial load. The largest reduction in APCs, total coliforms, and E. coli occurred on carcasses treated with a mixture of nisin and lactic acid. A mixture of nisin and lactic acid can be applied to beef carcasses through spray washing and can reduce bacterial populations by 2 log units.

Bacteriocins: safe, natural antimicrobials for food preservation

Bacteriocins are antibacterial proteins produced by bacteria that kill or inhibit the growth of other bacteria. Many lactic acid bacteria (LAB) produce a high diversity of different bacteriocins. Though these bacteriocins are produced by LAB found in numerous fermented and non-fermented foods, nisin is currently the only bacteriocin widely used as a food preservative. Many bacteriocins have been characterized biochemically and genetically, and though there is a basic understanding of their structure-function, biosynthesis, and mode of action, many aspects of these compounds are still unknown. This article gives an overview of bacteriocin applications, and differentiates bacteriocins from antibiotics. A comparison of the synthesis. mode of action, resistance and safety of the two types of molecules is covered. Toxicity data exist for only a few bacteriocins, but research and their long-time intentional use strongly suggest that bacteriocins can be safely used.

Surface application of lysozyme, nisin, and EDTA to inhibit spoilage and pathogenic bacteria on ham and bologna

A study was conducted to determine if the effectiveness of an antimicrobial treatment for cooked ham and bologna would be increased or maintained when applied in a surface coating. Cooked 10-g disks of ham and bologna sausage received one of three treatments: no coating (control), coating with 0.2 g of 7% (wt/vol) gelatin gel (gel-control), or coating with 0.2 g of 7% gelatin gel containing 25.5 g/liter of lysozyme-nisin (1:3) plus 25.5 g/liter of EDTA (gel-treated). The samples were then inoculated with one of six test organisms: Brochothrix thermosphacta, Escherichia coli O157:H7, Lactobacillus sakei, Leuconostoc mesenteroides, Listeria monocytogenes, or Salmonella Typhimurium. Inoculated samples were vacuum packed and stored at 8 degrees C for 4 weeks. The antimicrobial gel treatment had an immediate bactericidal effect up to 4 log CFU/cm2 on the four gram-positive organisms tested (B. thermosphacta, Lactobacillus sakei, Leuconostoc mesenteroides, and Listeria monocytogenes) and inhibited the growth of these organisms during the 4 weeks of storage. The antimicrobial gel treatment also had a bactericidal effect on the growth of Salmonella Typhimurium during storage. The numbers of E. coli O157:H7 on ham were reduced by 2 log CFU/cm2 following treatment with both antimicrobial-containing and non-antimicrobial-containing gels during the 4-week storage period. No effect was observed on the growth of E. coli O157:H7 on bologna.

Survival of Listeria monocytogenes Scott A on vacuum-packaged raw beef treated with polylactic acid, lactic acid, and nisin

Low-molecular-weight polylactic acid (LMW-PLA) and lactic acid (LA) were used to inhibit growth of Listeria monocytogenes Scott A on vacuum-packaged beef. Nisin was also used simultaneously as an additional hurdle to the growth of this pathogen. Inoculated beef cubes were immersed in a solution of 2% LMW-PLA, 2% LA, 400 IU/ml of nisin, or combinations of each acid and nisin for 5 min and drip-dried for 15 min. The cubes were then vacuum-packaged and stored at 4 degrees C for up to 42 days. Surface pH values of beef cubes treated with 2% LMW-PLA, the combination of 400 IU/ml of nisin and 2% LMW-PLA (2% NPLA), or 400 IU/ml of nisin alone were significantly reduced from 5.59 to 5.18, 5.01, and 5.19, respectively, whereas those decontaminated with 2% LA or 400 IU/ml of nisin and 2% LA (2% NLA) were significantly decreased from 5.59 to 4.92 and 4.83, respectively, at day 0 (P < or = 0.05). The 2% LMW-PLA, 2% LA, 2% NPLA, 2% NLA, and 400 IU/ml of nisin showed immediate bactericidal effects on L. monocytogenes Scott A (1.22-, 1.56-, 1.57-, 1.94-, and 1.64-log10 reduction, respectively) compared with the initial number of 5.33 log10 CFU/cm2 of the untreated control at day 0 (P < or = 0.05). These treatments, combined with vacuum-packaging and refrigeration temperature, succeeded to inhibit growth of L. monocytogenes during storage up to 42 days. At the end of 42 days, the numbers of L. monocytogenes Scott A remaining viable on these samples were 1.21, 0.36, 2.21, 0.84, and 0.89 log10 CFU/cm2, respectively.