10-minute assay for detecting Escherichia coli O157:H7 in ground beef samples using piezoelectric-excited millimeter-size cantilever sensors

Particle Diffusometry: An Optical Detection Method for Vibrio cholerae Presence in Environmental Water Samples

There is a need for a rapid, robust, and sensitive biosensor to identify low concentrations of pathogens in their native sample matrix without enrichment or purification. Nucleic acid-based detection methods are widely accepted as the gold standard in diagnostics, but robust detection of low concentrations of pathogens remains challenging. Amplified nucleic acids produce more viscous solutions, which can be measured by combining these products with fluorescent particles and measuring the change in the particle diffusion coefficient using a technique known as particle diffusometry. Here, we utilize Vibrio cholerae (V. cholerae) as a proof-of-concept for our detection system due to its inherently low concentration in environmental water samples. We demonstrate that particle diffusometry can be used to detect down to 1 V. cholerae cell in molecular-grade water in 20 minutes and 10 V. cholerae cells in pond water in just 35 minutes in 25 µL reaction volumes. The detection limit in pond water is environmentally relevant and does not require any enrichment or sample preparation steps. Particle diffusometry is 10-fold more sensitive than current gold standard fluorescence detection of nucleic acid amplification. Therefore, this novel measurement technique is a promising approach to detect low levels of pathogens in their native environments.

Overview of Piezoelectric Biosensors, Immunosensors and DNA Sensors and Their Applications

Piezoelectric biosensors are a group of analytical devices working on a principle of affinity interaction recording. A piezoelectric platform or piezoelectric crystal is a sensor part working on the principle of oscillations change due to a mass bound on the piezoelectric crystal surface. In this review, biosensors having their surface modified with an antibody or antigen, with a molecularly imprinted polymer, with genetic information like single stranded DNA, and biosensors with bound receptors of organic of biochemical origin, are presented and discussed. The mentioned recognition parts are frequently combined with use of nanoparticles and applications in this way are also introduced. An overview of the current literature is given and the methods presented are commented upon.

Rapid and sensitive immunodetection of Listeria monocytogenes in milk using a novel piezoelectric cantilever sensor

Listeria monocytogenes (LM), an important food-borne pathogen that has a high mortality rate (≈ 30%), was successfully detected within an hour at the infection dose limit of 10(3)/mL, both in buffer and milk. LM detection was demonstrated using a novel asymmetrically anchored cantilever sensor and a commercially available antibody. Sensor responses were confirmed using a secondary antibody binding step, similar to the sandwich ELISA assays, as a means of signal amplification that also reduced the occurrence of false negatives. Detection of LM at a concentrations of 10(2)/mL was achieved, by incorporating a third antibody binding step, which is an order of magnitude smaller than the infection dose (<1000 cells) for LM. The commercially available antibody for LM used in this work is shown to have low avidity which partially explains the relatively low sensitivity reported for LM as compared to other pathogens.

Biosensing using dynamic-mode cantilever sensors: a review

Current progress on the use of dynamic-mode cantilever sensors for biosensing applications is critically reviewed. We summarize their use in biosensing applications to date with focus given to: cantilever size (milli-, micro-, and nano-cantilevers), their geometry, and material used in fabrication. The review also addresses techniques investigated for both exciting and measuring cantilever resonance in various environments (vacuum, air, and liquid). Biological targets that have been detected to date are summarized with attention to bio-recognition chemistry, surface functionalization method, limit of detection, resonant frequency mode type, and resonant frequency measurement scheme. Applications published to date are summarized in a comprehensive table with description of the aforementioned details including comparison of sensitivities. Further, the general theory of cantilever resonance is discussed including fluid-structure interaction and its dependence on the Reynolds number for Newtonian fluids. The review covers designs with frequencies ranging from ∼1 kHz to 10 MHz and cantilever size ranging from millimeters to nanometers. We conclude by identifying areas that require further investigation.

Label-free capacitive immunosensor based on quartz crystal Au electrode for rapid and sensitive detection of Escherichia coli O157:H7

A label-free capacitive immunosensor based on quartz crystal Au electrode was developed for rapid and sensitive detection of Escherichia coli O157:H7. The immunosensor was fabricated by immobilizing affinity-purified anti-E. coli O157:H7 antibodies onto self-assembled monolayers (SAMs) of 3-mercaptopropionic acid (MPA) on the surface of a quartz crystal Au electrode. Bacteria suspended in solution became attached to the immobilized antibodies when the immunosensor was tested in liquid samples. The change in capacitance caused by the bacteria was directly measured by an electrochemical detector. An equivalent circuit was introduced to simulate the capacitive immunosensor. The immunosensor was evaluated for E. coli O157:H7 detection in pure culture and inoculated food samples. The experimental results indicated that the capacitance change was linearly correlated with the cell concentration of E. coli O157:H7. The immunosensor was able to discriminate between cellular concentrations of 10(2)-10(5) cfu mL(-1) and has applications in detecting pathogens in food samples. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were also employed to characterize the stepwise assembly of the immunosensor.

Piezoelectric-excited millimeter-sized cantilever biosensors

In this chapter, method of fabricating a cantilever biosensors and their use in measuring the presence of a protein is described. There are many variations in construction of a cantilever sensor. A simple and an easy version is described in this chapter. The specificity of the sensor is obtained by immobilizing an antibody specific to the antigen of interest. The piezoelectric cantilever sensors are very sensitive and can easily detect a 60 kDa protein at 100 fg/mL concentration. Experimental procedure for carrying out detection of a target analyte is outlined and a sample set of results is included.