Salmonella enterica biofilm formation and density in the Centers for Disease Control and Prevention's biofilm reactor model is related to serovar and substratum

Persistence of microbiological hazards in food and feed production and processing environments

Listeria monocytogenes (in the meat, fish and seafood, dairy and fruit and vegetable sectors), Salmonella enterica (in the feed, meat, egg and low moisture food sectors) and Cronobacter sakazakii (in the low moisture food sector) were identified as the bacterial food safety hazards most relevant to public health that are associated with persistence in the food and feed processing environment (FFPE). There is a wide range of subtypes of these hazards involved in persistence in the FFPE. While some specific subtypes are more commonly reported as persistent, it is currently not possible to identify universal markers (i.e. genetic determinants) for this trait. Common risk factors for persistence in the FFPE are inadequate zoning and hygiene barriers; lack of hygienic design of equipment and machines; and inadequate cleaning and disinfection. A well-designed environmental sampling and testing programme is the most effective strategy to identify contamination sources and detect potentially persistent hazards. The establishment of hygienic barriers and measures within the food safety management system, during implementation of hazard analysis and critical control points, is key to prevent and/or control bacterial persistence in the FFPE. Once persistence is suspected in a plant, a 'seek-and-destroy' approach is frequently recommended, including intensified monitoring, the introduction of control measures and the continuation of the intensified monitoring. Successful actions triggered by persistence of L. monocytogenes are described, as well as interventions with direct bactericidal activity. These interventions could be efficient if properly validated, correctly applied and verified under industrial conditions. Perspectives are provided for performing a risk assessment for relevant combinations of hazard and food sector to assess the relative public health risk that can be associated with persistence, based on bottom-up and top-down approaches. Knowledge gaps related to bacterial food safety hazards associated with persistence in the FFPE and priorities for future research are provided.

Effect of antibiotics and sanitizers on Salmonella biofilms associated with seafood contact surfaces

This study investigates the effect of antibiotics and sanitizers on biofilm forming Salmonella isolated from different seafood contact surfaces. Four Salmonella were isolated from 384 swab samples collected from various contact surfaces of fishing boats, fish landing centres and seafood processing plants. One out of four isolates was from the fishing boat (FB I -1) other three isolates were from the seafood processing plant (FPPII -4, FPPII- 5, FPPI-3). The ability of Salmonella to form biofilms on different contact surfaces (HDPE, stainless steel, wood, glass, tiles) was tested with the microbial load on different incubation days, and a higher count was observed on day five. The effect of sanitizer viz., sodium hypochlorite (20, 50, 100, 200 mg/l) and iodophor (2, 5, 10 mg/l) on the biofilm formed on different seafood contact surfaces were investigated. A reduction of 2-3 log was observed on surfaces of HDPE and stainless steel when they were treated with a minimum of 5 mg/l of iodophor or 20 mg/l of sodium hypochlorite after a contact time of 5 min. Antibiotic resistance of biofilm forming Salmonella was tested for different classes of antibiotics (penicillin, ß-lactams, quinolones, macrolides, aminoglycosides, phenol drugs, sulfonamides, cephalosporin). All four isolates showed intermediate resistance to ciprofloxacin, a quinolone drug. Only one isolate FB I -1 (fishing boat deck) expressed resistance to more drugs, viz., ßlactams (AMC, AMP, penicillin G), macrolides (AZM) and nitrofurantoin (NIT). These findings shall help the seafood processors to mitigate the formation of Salmonella biofilms on various seafood contact surfaces with different sanitizers and the antibiotic resistance of biofilm forming Salmonella shall give knowledge on human clinical treatments. With this study, we shall recommend the regulatory authorities control the contamination level of fish handling areas.

Prevalence of biofilm forming Salmonella in different seafood contact surfaces of fishing boats, fish landing centres, fish markets and seafood processing plants

The prevalence of biofilm forming Salmonella on different seafood contact surfaces was investigated. Out of 384 swab samples, 16.14 % and 1 % were confirmed biochemically and molecularly as Salmonella respectively. One out of four isolates was from the boat deck, and three were from the seafood processing plant. Salmonella was more prevalent in January, June, and September months. Different assays investigated the biofilm forming ability of isolates. Two out of four isolates have shown strong biofilms, and the others were moderate biofilm formers by microtitre plate assay. In the CRA assay, three isolates showed 'rdar' morphotype, and one showed 'bdar' morphotype. All isolates were positive for gcpA gene (~1700 bp), a critical gene found in Salmonella biofilms. The microbial load of Salmonella biofilms on different contact surfaces were determined, stainless steel and HDPE were found prone to biofilms. With this, a suitable mechanism shall be formulated to control the biofilms of Salmonella.

Integrated combined effects of temperature, pH and sodium chloride concentration on biofilm formation by Salmonella enterica ser. Enteritidis and Typhimurium under low nutrient food-related conditions

Salmonella enterica is a major foodborne bacterial pathogen. This forms biofilms on surfaces and persists, depending on the strain and the environment. The integrative interaction of temperature (T; 13-39 °C), pH (5-8) and sodium chloride (NaCl) concentration (0.5-8.5%) on biofilm formation by two S. enterica strains (ser. Enteritidis and Typhimurium) was here evaluated under low nutrient conditions. This was achieved using response surface methodology to model the combined effect of each factor on the response, through mathematical quadratic fitting of the outcomes of a sequence of designed experiments. These last were executed by incubating stainless steel coupons carrying sessile bacteria, for 24 h, in 1:10 diluted tryptone soya broth, under 15 different combinations of three independent factors (T, pH and NaCl). For each strain, a second order polynomial model, describing the relationship between biofilm formation (log CFU/cm²) and the factors (T, pH and NaCl), was developed using least square regression analysis. Both derived models predicted the combined influences of these factors on biofilm formation, with agreement between predictions and experimental observations (R² ≥ 0.96, P ≤ 0.0001). For both strains, the increase of NaCl content restricted their sessile growth, while under low salinity conditions (NaCl < 4%) biofilm formation was favored as pH increased, regardless of T. Interestingly, under low salt content, and depending on the strain, biofilm formation was either favored or hindered by increasing T. Thus, 34.5 and 13 °C were the T predicted to maximize biofilm formation by strains Enteritidis and Typhimurium, respectively, something which was also experimentally verified. To sum, these models can predict the interactive influences of crucial food-related factors on biofilm growth of a significant foodborne pathogen towards the efforts to limit its persistence in food industry.

Biofilm formation capacity of Salmonella serotypes at different temperature conditions

ABSTRACT: Salmonella spp. are one of the most important agents of foodborne disease in several countries, including Brazil. Poultry-derived products are the most common food products, including meat and eggs, involved in outbreaks of human salmonellosis. Salmonella has the capacity to form biofilms on both biotic and abiotic surfaces. The biofilm formation process depends on an interaction among bacterial cells, the attachment surface and environmental conditions. These structures favor bacterial survival in hostile environments, such as slaughterhouses and food processing plants. Biofilms are also a major problem for public health because breakage of these structures can cause the release of pathogenic microorganisms and, consequently, product contamination. The aim of this study was to determine the biofilm production capacity of Salmonella serotypes at four different temperatures of incubation. Salmonella strains belonging to 11 different serotypes, isolated from poultry or from food involved in salmonellosis outbreaks, were selected for this study. Biofilm formation was investigated under different temperature conditions (37°, 28°, 12° and 3°C) using a microtiter plate assay. The tested temperatures are important for the Salmonella life cycle and to the poultry-products process. A total of 92.2% of the analyzed strains were able to produce biofilm on at least one of the tested temperatures. In the testing, 71.6% of the strains produced biofilm at 37°C, 63% at 28°C, 52.3% at 12°C and 39.5% at 3°C, regardless of the serotype. The results indicate that there is a strong influence of temperature on biofilm production, especially for some serotypes, such as S. Enteritidis, S. Hadar and S. Heidelberg. The production of these structures is partially associated with serotype. There were also significant differences within strains of the same serotype, indicating that biofilm production capacity may be strain-dependent.

Commonly used disinfectants fail to eradicate Salmonella enterica biofilms from food contact surface materials

Salmonellosis is the second most common cause of food-borne illness worldwide. Contamination of surfaces in food processing environments may result in biofilm formation with a risk of food contamination. Effective decontamination of biofilm-contaminated surfaces is challenging. Using the CDC biofilm reactor, the activities of sodium hypochlorite, sodium hydroxide, and benzalkonium chloride were examined against an early (48-h) and relatively mature (168-h) Salmonella biofilm. All 3 agents result in reduction in viable counts of Salmonella; however, only sodium hydroxide resulted in eradication of the early biofilm. None of the agents achieved eradication of mature biofilm, even at the 90-min contact time. Studies of activity of chemical disinfection against biofilm should include assessment of activity against mature biofilm. The difficulty of eradication of established Salmonella biofilm serves to emphasize the priority of preventing access of Salmonella to postcook areas of food production facilities.