Factors Affecting Microbial Inactivation during High Pressure Processing in Juices and Beverages: A Review

Impact of high-pressure processing on the bioactive compounds of milk - A comprehensive review

High-pressure processing (HPP) is a promising alternative to thermal pasteurization. Recent studies highlighted the effectivity of HPP (400-600 MPa and exposure times of 1-5 min) in reducing pathogenic microflora for up to 5 logs. Analysis of modern scientific sources has shown that pressure affects the main components of milk including fat globules, lactose, casein micelles. The behavior of whey proteins under HPP is very important for milk and dairy products. HPP can cause significant changes in the quaternary (> 150 MPa) and tertiary (> 200 MPa) protein structures. At pressures > 400 MPa, they dissolve in the following order: αs2-casein, αs1-casein, k-casein, and β-casein. A similar trend is observed in the processing of whey proteins. HPP can affect the rate of milk fat adhering as cream with increased results at 100-250 MPa with time dependency while decreasing up to 70% at 400-600 MPa. Some studies indicated the lactose influencing casein on HP, with 10% lactose addition in case in suspension before exposing it to 400 MPa for 40 min prevents the formation of large casein micelles. Number of researches has shown that moderate pressures (up to 400 MPa) and mild heating can activate or stabilize milk enzymes. Pressures of 350-400 MPa for 100 min can boost the activity of milk enzymes by up to 140%. This comprehensive and critical review will benefit scientific researchers and industrial experts in the field of HPP treatment of milk and its effect on milk components.

Graphical abstract

High pressure processing plus technologies: Enhancing the inactivation of vegetative microorganisms

High pressure processing (HPP) is a non-thermal technology that can ensure microbial safety without compromising food quality. However, the presence of pressure-resistant sub-populations, the revival of sub-lethally injured (SLI) cells, and the resuscitation of viable but non-culturable (VBNC) cells pose challenges for its further development. The combination of HPP with other methods such as moderate temperatures, low pH, and natural antimicrobials (e.g., bacteriocins, lactate, reuterin, endolysin, lactoferrin, lactoperoxidase system, chitosan, essential oils) or other non-thermal processes (e.g., CO2, UV-TiO2 photocatalysis, ultrasound, pulsed electric fields, ultrafiltration) offers feasible alternatives to enhance microbial inactivation, termed as "HPP plus" technologies. These combinations can effectively eliminate pressure-resistant sub-populations, reduce SLI or VBNC cell populations, and inhibit their revival or resuscitation. This review provides an updated overview of microbial inactivation by "HPP plus" technologies and elucidates possible inactivation mechanisms.

Importance of Intracellular Energy Status on High-Hydrostatic-Pressure Inactivation of sake Yeast Saccharomyces cerevisiae

The HHP inactivation behaviors of Niigata sake yeast Saccharomyces cerevisiae strain S9arg and its aerobic respiratory-deficient mutant strains were investigated after cultivating them in a YPD media containing 2% to 15% glucose, as well as in moromi mash, in a laboratory-scale sake brewing process. The piezotolerance of strain S9arg, shown after cultivation in a YPD medium containing 2% glucose, decreased to become piezosensitive with increasing glucose concentrations in YPD media. In contrast, the piezosensitivity of a mutant strain UV1, shown after cultivation in the YPD medium containing 2% glucose, decreased to become piezotolerant with increasing glucose concentrations in the YPD medium. The intracellular ATP concentrations were analyzed for an S. cerevisiae strain with intact aerobic respiratory ability, as well as for strain UV1. The higher concentration of ATP after cultivation suggested a higher energy status and may be closely related to higher piezotolerance for the yeast strains. The decreased piezotolerance of strain S9arg observed after a laboratory-scale sake brewing test may be due to a lower energy status resulting from a high glucose concentration in moromi mash during the early period of brewing, as well as a lower aeration efficiency during the brewing process, compared with cultivation in a YPD medium containing 2% glucose.

Biological functions at high pressure: transcriptome response of Shewanella oneidensis MR-1 to hydrostatic pressure relevant to Titan and other icy ocean worlds

High hydrostatic pressure (HHP) is a key driver of life's evolution and diversification on Earth. Icy moons such as Titan, Europa, and Enceladus harbor potentially habitable high-pressure environments within their subsurface oceans. Titan, in particular, is modeled to have subsurface ocean pressures ≥ 150 MPa, which are above the highest pressures known to support life on Earth in natural ecosystems. Piezophiles are organisms that grow optimally at pressures higher than atmospheric (0.1 MPa) pressure and have specialized adaptations to the physical constraints of high-pressure environments - up to ~110 MPa at Challenger Deep, the highest pressure deep-sea habitat explored. While non-piezophilic microorganisms have been shown to survive short exposures at Titan relevant pressures, the mechanisms of their survival under such conditions remain largely unelucidated. To better understand these mechanisms, we have conducted a study of gene expression for Shewanella oneidensis MR-1 using a high-pressure experimental culturing system. MR-1 was subjected to short-term (15 min) and long-term (2 h) HHP of 158 MPa, a value consistent with pressures expected near the top of Titan's subsurface ocean. We show that MR-1 is metabolically active in situ at HHP and is capable of viable growth following 2 h exposure to 158 MPa, with minimal pressure training beforehand. We further find that MR-1 regulates 264 genes in response to short-term HHP, the majority of which are upregulated. Adaptations include upregulation of the genes argA, argB, argC, and argF involved in arginine biosynthesis and regulation of genes involved in membrane reconfiguration. MR-1 also utilizes stress response adaptations common to other environmental extremes such as genes encoding for the cold-shock protein CspG and antioxidant defense related genes. This study suggests Titan's ocean pressures may not limit life, as microorganisms could employ adaptations akin to those demonstrated by terrestrial organisms.

Foodborne pathogen inactivation in fruit juices utilizing commercial scale high-pressure processing: Effects of acidulants and pH

The effects of juice pH, type of acidulant, and post-treatment refrigeration on the high-pressure processing (HPP) inactivation of Escherichia coli O157:H7, Salmonella enterica, and Listeria monocytogenes in acid beverages were evaluated. Inoculated apple, orange, and grape juices (at their original pH and adjusted to pH 4.00, 4.50, and 5.00) were treated at 550 MPa for 1 min at 5 °C. In addition, inoculated model solutions acidified to a pH of 5.00 with acetic, citric, malic, and tartaric acids were treated at 400 MPa for 1 min at 5 °C. The effect of refrigerated storage for 24 h after treatment on pathogen inactivation in both experiments was also assessed. A greater than 5-log reduction of the three pathogens inoculated was achieved in all juices immediately after HPP at the juices' original pH, and of L. monocytogenes under all experimental conditions. Refrigerated storage for 24 h after HPP treatment improved the inactivation of E. coli O157:H7, to >5-log reduction, at pH 4.00 in apple juice and of Salmonella in the three juices at pH 4.00. The type of acidulant did not significantly (p > 0.01) affect E. coli or Salmonella inactivation in acidified model solutions but a greater than 5-log reduction after HPP was only achieved for L. monocytogenes when acetic acid was used. The effectiveness of HPP for pathogen inactivation depended largely on product pH and the target pathogen of concern.

Acid adaptation increased the resistance of Escherichia coli O157:H7 in bok choy (Brassica rapa subsp. chinensis) juice to high-pressure processing

IMPORTANCE

Based on the U.S. Food and Drug Administration regulations, E. coli O157:H7 is a pertinent pathogen in high acid juices that needs to be inactivated during the pasteurization process. The results of this study suggest that the effect of acid adaptation should be considered in the selection of HPP parameters for E. coli O157:H7 inactivation to ensure that pasteurization objectives are achieved.

High-Pressure Processing for Cold Brew Coffee: Safety and Quality Assessment under Refrigerated and Ambient Storage

Cold brew coffee (CBC) has gained in popularity due to its distinct sensory experience. However, CBC can pose a risk for bacterial pathogens if not stored properly. High-Pressure Processing (HPP) is a nonthermal technology that can improve the safety of CBC while maintaining its quality. In this study, CBC made from ground roasted coffee grains was processed at 600 MPa for 3 min and stored at 4 or 23 °C for 90 days. The microbiological quality indicators remained stable throughout the study period. Physicochemical and quality parameters, such as pH, total dissolved solids, titratable acidity, color, total phenolic compounds and antioxidant activity, were not significantly affected by HPP. Both unprocessed and HPP CBC samples showed changes in pH, titratable acidity and color stability after 60 days at 23 °C. Unprocessed CBC samples spiked with Escherichia coli O157:H7, Listeria monocytogenes and Salmonella enterica showed decreased counts, but the pathogens were still detectable after 60 days at 4 °C and after 90 days at 23 °C. HPP achieved a >6-log10 reduction in the species tested, with non-detectable levels for at least 90 days at both storage temperatures. These findings suggest that HPP can effectively control vegetative pathogens and spoilage microorganisms in CBC while preserving its quality attributes.

Trends in Food Pathogens Risk Attenuation

Foodborne pathogens represent one of the most dangerous threats to public health along the food chain all over the world. Over time, many methods were studied for pathogen inhibition in food, such as the development of novel packaging materials with enhanced properties for microorganisms' growth inhibition (coatings, films) and the use of emerging technologies, like ultrasound, radio frequency or microwave. The aim of this study was to evaluate the current trends in the food industry for pathogenic microorganisms' inhibition and food preservation in two directions, namely technology used for food processing and novel packaging materials development. Five technologies were discussed in this study, namely high-voltage atmospheric cold plasma (HVACP), High-Pressure Processing (HPP), microwaves, radio frequency (RF) heating and ultrasound. These technologies proved to be efficient in the reduction of pathogenic microbial loads in different food products. Further, a series of studies were performed, related to novel packaging material development, by using a series of antimicrobial agents such as natural extracts, bacteriocins or antimicrobial nanoparticles. These materials proved to be efficient in the inhibition of a wide range of microorganisms, including Gram-negative and Gram-positive bacteria, fungi and yeasts.

Non-thermal emerging processing Technologies: Mitigation of microorganisms and mycotoxins, sensory and nutritional properties maintenance in clean label fruit juices

The increase in the fruit juice consumption and the interest in clean label products boosted the development and evaluation of new processing technologies. The impact of some emerging non-thermal technologies in food safety and sensory properties has been evaluated. The main technologies applied in the studies are ultrasound, high pressure, supercritical carbon dioxide, ultraviolet, pulsed electric field, cold plasma, ozone and pulsed light. Since there is no single technique that presents high potential for all the evaluated requirements (food safety, sensory, nutritional and the feasibility of implementation in the industry), the search for new technologies to overcome the limitations is fundamental. The high pressure seems to be the most promising technology regarding all the aspects mentioned. Some of the outstanding results are 5 log reduction of E. coli, Listeria and Salmonella, 98.2% of polyphenol oxidase inactivation and 96% PME reduction. However its cost can be a limitation for industrial implementation. The combination of pulsed light and ultrasound could overcome this limitation and provide higher quality fruit juices. The combination was able to achieve 5.8-6.4 log cycles reduction of S. Cerevisiae, and pulsed light is able to obtain PME inactivation around 90%, 61.0 % more antioxidants, 38.8% more phenolics and 68.2% more vitamin C comparing to conventional processing, and similar sensory scores after 45 days at 4 °C comparing to fresh fruit juice. This review aims to update the information related to the application of non-thermal technologies in the fruit juice processing through systematic and updated data to assist in industrial implementation strategies.

Microbiological profiling and knowledge of food preservation technology to support guidance on a neutropenic diet for immunocompromised patients

The current society consists of an increasing number of people vulnerable to infections. For certain people with severe immunodeficiency, a neutropenic or low-microbial diet is being prescribed, which substitutes high-risk foods that are more likely to contain human (opportunistic) pathogens with lower-risk alternatives. These neutropenic dietary guidelines are typically set up from a clinical and nutritional perspective, rather than from a food processing and food preservation perspective. In this study, the current guidelines in use by the Ghent University Hospital were evaluated based on the current knowledge of food processing and preservation technologies and the scientific evidence on microbiological quality, safety, and hygiene of processed foods. Three criteria are identified to be important: (1) the microbial contamination level and composition; (2) the potential presence of established foodborne pathogens such as Salmonella spp. (to which a zero-tolerance policy is recommended); and (3) an increased vigilance for L. monocytogenes as an opportunistic foodborne pathogen with a high mortality rate in immunocompromised individuals (to which a zero-tolerance policy should apply). A combination of these three criteria was used as a framework for the evaluation of the suitability of foodstuffs to be included in a low-microbial diet. Differences in processing technologies, initial contamination of products, etc., however, lead to a high degree of variability in microbial contamination and make it difficult to unambiguously accept or reject a certain type of foodstuff without prior knowledge of the ingredients and the processing and preservation technologies applied during manufacturing and subsequent storage conditions. A restricted screening on a selection of (minimally processed) plant-based foodstuffs on the retail market in Flanders, Belgium supported decision-making on the inclusion of these food types in a low-microbial diet. Still, when determining the suitability of a foodstuff to be included in a low-microbial diet, not only the microbiological status but also nutritional and sensorial properties should be assessed, which requires multidisciplinary communication and collaboration.

Juice Quality Evaluation with Multisensor Systems-A Review

E-nose and e-tongue are advanced technologies that allow for the fast and precise analysis of smells and flavours using special sensors. Both technologies are widely used, especially in the food industry, where they are implemented, e.g., for identifying ingredients and product quality, detecting contamination, and assessing their stability and shelf life. Therefore, the aim of this article is to provide a comprehensive review of the application of e-nose and e-tongue in various industries, focusing in particular on the use of these technologies in the fruit and vegetable juice industry. For this purpose, an analysis of research carried out worldwide over the last five years, concerning the possibility of using the considered multisensory systems to test the quality and taste and aroma profiles of juices is included. In addition, the review contains a brief characterization of these innovative devices through information such as their origin, mode of operation, types, advantages and disadvantages, challenges and perspectives, as well as the possibility of their applications in other industries besides the juice industry.

High-Pressure-Based Strategies for the Inactivation of Bacillus subtilis Endospores in Honey

Honey is a value-added product rich in several types of phenolic compounds, enzymes, and sugars recently explored in biomedical and food applications. Nevertheless, even though it has a low water activity (a_W ≈ 0.65) that hinders the development of pathogenic and spoilage microorganisms, it is still prone to contamination by pathogenic microorganisms (vegetative and spores) and may constitute harm to special groups, particularly by immunosuppressed people and pregnant women. Thus, an efficient processing methodology needs to be followed to ensure microbial safety while avoiding 5-hydroxymethylfurfural (HMF) formation and browning reactions, with a consequent loss of biological value. In this paper, both thermal (pressure-assisted thermal processing, PATP) and nonthermal high-pressure processing (HPP), and another pressure-based methodology (hyperbaric storage, HS) were used to ascertain their potential to inactivate Bacillus subtilis endospores in honey and to study the influence of a_W on the inactivation on this endospore. The results showed that PATP at 600 MPa/15 min/75 °C of diluted honey (52.9 °Brix) with increased a_W (0.85 compared to ≈0.55, the usual honey a_W) allowed for inactivating of at least 4.0 log units of B. subtilis spores (to below detection limits), while HS and HPP caused neither the germination nor inactivated spores (i.e., there was neither a loss of endospore resistance after heat shock nor endospore inactivation as a consequence of the storage methodology). PATP of undiluted honey even at harsh processing conditions (600 MPa/15 min/85 °C) did not impact the spore load. The results for diluted honey open the possibility of its decontamination by spores’ inactivation for medical and pharmaceutical applications.

Peanut Butter Food Safety Concerns—Prevalence, Mitigation and Control of Salmonella spp., and Aflatoxins in Peanut Butter

Peanut butter has a very large and continuously increasing global market. The food safety risks associated with its consumption are also likely to have impacts on a correspondingly large global population. In terms of prevalence and potential magnitude of impact, contamination by Salmonella spp., and aflatoxins, are the major food safety risks associated with peanut butter consumption. The inherent nature of the Salmonella spp., coupled with the unique chemical composition and structure of peanut butter, present serious technical challenges when inactivating Salmonella spp. in contaminated peanut butter. Thermal treatment, microwave, radiofrequency, irradiation, and high-pressure processing all are of limited efficacy in inactivating Salmonella spp. in contaminated peanut butter. The removal of aflatoxins in contaminated peanut butter is equally problematic and for all practical purposes almost impossible at the moment. Adopting good manufacturing hygiene practices from farm to table and avoiding the processing of contaminated peanuts are probably some of the few practically viable strategies for minimising these peanut butter food safety risks. The purpose of this review is to highlight the nature of food safety risks associated with peanut butter and to discuss the effectiveness of the initiatives that are aimed at minimising these risks.

The Effects of High-Pressure Processing on pH, Thiobarbituric Acid Value, Color and Texture Properties of Frozen and Unfrozen Beef Mince

In this study, beef mince (approximately 4% fat longissmus costarum muscle of approximately 2-year-old Holstein cattle) was used as a material. High-pressure processing (HPP) was applied to frozen and unfrozen, vacuum-packed minced meat samples. The pH and thiobarbituric acid (TBA) values of the samples were examined during 45 days of storage. Color values (L*, a* and b*) and texture properties were examined during 30 days of storage. After freezing and HPP (350 MPa, 10 min, 10 °C), the pH value of minced meat increased (p > 0.05) and its TBA value decreased (p < 0.05). The increase in pH may be due to increased ionization during HPP. Some meat peptides, which are considered antioxidant compounds, increased the oxidative stability of meat, so a decrease in TBA may have been observed after freezing and HPP. While the color change in unpressurized samples was a maximum of 3.28 units during storage, in the pressurized sample, it exceeded the limit of 10 units on the first day of storage and exceeded the limit of 10 units on the third day of storage in the frozen and pressurized sample. Freezing and HPP caused the color of beef mince to be retained longer. The hardness, gumminess, chewability, adherence, elasticity, flexibility values of the pressurized and pressurized after freezing samples were higher than those of the unpressurized samples during storage. On the other hand, the opposite was the case for the adhesiveness values. In industrial applications, meat must be pressurized after being vacuum packed. If HPP is applied to frozen beef mince, some of its properties such as TBA, color, and texture can be preserved for a longer period of time without extreme change.

Effect of High Pressure on the Properties of Chocolate Fillings during Long-Term Storage

The aim of this study was to evaluate the impact of high-pressure processing (HPP) on the long-term storage of chocolate fillings at room temperature, compared with conventional storage at lower temperatures. Dark chocolate fillings were treated at different pressure levels, holding times and stored at 20 °C for 12 months. Unprocessed batches were stored at 4 °C and at −12 °C. Moisture, water activity (aw), pH, colour, G′_1Hz and indigenous microflora were measured at 2, 4, 6, 8, 10 and 12 months of storage. Results showed that 600 MPa/20 min processing was the most effective controlling mesophilic group, presenting 3.8 log cfu/g after 12 months of storage, and inactivating moulds and yeasts after HPP treatment. Colour was affected by storage, including a reduction in the L* parameter in all conditions to final values between 37.8 and 39.3, while the a* parameter increased during storage time at −12 °C and 4 °C to final values of around 12, and parameter b* decreased at storage temperature 20 °C to 5.3. Storage time affected the rheological behaviour of HPP-treated samples, increasing G′_1Hz from the 2nd to 12th month of storage time to the final values between 1603 kPa and 2139 kPa. Moisture, aw and pH were not affected by HPP treatment nor storage time.

Effects of High Hydrostatic Pressure Combined with Vacuum-Freeze Drying on the Aroma-Active Compounds in Blended Pumpkin, Mango, and Jujube Juice

A combination process of completely non-thermal processing methods involving high hydrostatic pressure (HHP) and vacuum-freeze drying (VFD) for producing a new snack from fruit and vegetable blends was developed, and the effect of the process on flavor quality was investigated. The HHP-VFD treatment did not significantly reduce volatile compound contents compared to single HHP or VFD. Gas chromatography-olfactometry showed that HHP-VFD raised the contents of floral-like volatile compounds (e.g., β-ionone) compared to the untreated sample. Sensory evaluation analysis confirmed that the overall liking was unchanged after the HHP-VFD treatment. The HHP-VFD combined treatment is effective in maintaining the flavor and extending shelf life, and is convenient for the portability and transportation of ready-to-drink juice.

High-Pressure-Induced Sublethal Injuries of Food Pathogens-Microscopic Assessment

High Hydrostatic Pressure (HHP) technology is considered an alternative method of food preservation. Nevertheless, the current dogma is that HHP might be insufficient to preserve food lastingly against some pathogens. Incompletely damaged cells can resuscitate under favorable conditions, and they may proliferate in food during storage. This study was undertaken to characterize the extent of sublethal injuries induced by HHP (300-500 MPa) on Escherichia coli and Listeria inncua strains. The morphological changes were evaluated using microscopy methods such as Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Epifluorescence Microscopy (EFM). The overall assessment of the physiological state of tested bacteria through TEM and SEM showed that the action of pressure on the structure of the bacterial membrane was almost minor or unnoticeable, beyond the L. innocua wild-type strain. However, alterations were observed in subcellular structures such as the cytoplasm and nucleoid for both L. innocua and E. coli strains. More significant changes after the HHP of internal structures were reported in the case of wild-type strains isolated from raw juice. Extreme condensation of the cytoplasm was observed, while the outline of cells was intact. The percentage ratio between alive and injured cells in the population was assessed by fluorescent microscopy. The results of HHP-treated samples showed a heterogeneous population, and red cell aggregates were observed. The percentage ratio of live and dead cells (L/D) in the L. innocua collection strain population was higher than in the case of the wild-type strain (69%/31% and 55%/45%, respectively). In turn, E. coli populations were characterized with a similar L/D ratio. Half of the cells in the populations were distinguished as visibly fluorescing red. The results obtained in this study confirmed sublethal HHP reaction on pathogens cells.

Assessing the pressure resistance of Escherichia coli O157:H7, Listeria monocytogenes and Salmonella enterica to high pressure processing (HPP) in citric acid model solutions for process validation

Despite the commercial success of high pressure processing (HPP) in the juice industry, some regulatory agencies still require process validation. However, there is a lack of consensus on various aspects regarding validation protocols, including the selection of representative strains to be used in challenge tests. This study characterized the variable response of Escherichia coli O157:H7 (34 strains), Listeria monocytogenes (44 strains) and Salmonella enterica (45 strains) to HPP, and identified potential candidates to use in process validation. Stationary phase cells were submitted to 500 MPa for 1 min at 10 °C in model solutions consisting of tryptic soy broth + 0.6% yeast extract (TSBYE) adjusted to pH 4.5 and 6.0 with citric acid. At pH 6.0, pressure resistance widely varied between species and within strains of the same species. E. coli O157:H7 and L. monocytogenes were the most pressure resistant and showed high variability at strain level, as the total count range given by minimum and maximum counts spread between 2.0 and 6.5 log₁₀ CFU/ml. S. enterica was the least resistant pathogen with more than 82% of the isolates displaying non-detectable counts after HPP. Recovery through storage at 12 °C was also variable for all pathogens, but eventually most strains recovered with median counts on day 14 between 8.3 and 8.9 log₁₀ CFU/ml. For pH 4.5 solutions, 26 E. coli O157:H7 strains displayed survivors after HPP but did not adapt, registering non-detectable counts in the next sampling dates. None of the L. monocytogenes and S. enterica strains survived HPP or incubation at pH 4.5 (<2.0 log₁₀ CFU/ml), suggesting that citric acid at 4.16 g/l is a safe barrier for pathogen control under moderate HPP conditions. Principal component and cluster analyses served to propose strain cocktails for each species based on their pressure resistant and adaptation phenotypes. Additionally, S. enterica was identified as less pressure resistant and less prone to recover following HPP than E. coli O157:H7 and L. monocytogenes, so its relevance in process validation for juices should be questioned. Future work will validate the proposed strain cocktails on real food systems.

High pressure processing combined with selected hurdles: Enhancement in the inactivation of vegetative microorganisms

High pressure processing (HPP) as a nonthermal processing (NTP) technology can ensure microbial safety to some extent without compromising food quality. However, for vegetative microorganisms, the existence of pressure-resistant subpopulations, the revival of sublethal injury (SLI) state cells, and the resuscitation of viable but nonculturable (VBNC) state cells may constitute potential food safety risks and pose challenges for the further development of HPP application. HPP combined with selected hurdles, such as moderately elevated or low temperature, low pH, natural antimicrobials (bacteriocin, lactate, reuterin, endolysin, lactoferrin, lactoperoxidase system, chitosan, essential oils), or other NTP (CO₂ , UV-TiO₂ photocatalysis, ultrasound, pulsed electric field, ultrafiltration), have been highlighted as feasible alternatives to enhance microbial inactivation (synergistic or additive effect). These combinations can effectively eliminate the pressure-resistant subpopulation, reduce the population of SLI or VBNC state cells and inhibit their revival or resuscitation. This review provides an updated overview of the microbial inactivation by the combination of HPP and selected hurdles and restructures the possible inactivation mechanisms.