Endodontic re-treatment and restorative treatment of a dens invaginatus type II through new technologies

Application of personalized templates in minimally invasive management of coronal dens invaginatus: a report of two cases

BACKGROUND

Treating the coronal dens invaginatus (CDI) with pulp infection commonly involves the removal of invagination, which increases the risk of perforation and fracture, and compromises the tooth structure. Minimally invasive endodontic management of CDI is highly recommended. This report describes two cases of type II CDI with the application of personalized templates.

CASE PRESENTATION

Two cases of type II CDI, affecting the main root canal in a maxillary canine and a lateral incisor, were diagnosed. A guided endodontics (GE) approach was applied. Cone-beam computed tomography and intraoral scans were imported and aligned in a virtual planning software to design debridement routes and templates. The MICRO principle (which involves the aspects of Mechanical (M) debridement, Irrigation (I), Access cavities (C), Rectilinear routes (R), and Obstruction (O)) was proposed for designing optimal debridement routes for future applications. The templates were innovatively personalized and designed to preserve the tooth structure maximally while effectively debriding the root canal. Root canal treatment with supplementary disinfection was then performed. The follow-up of the two patients revealed favorable clinical and radiographic outcomes.

CONCLUSIONS

The GE approach could be a feasible method for preserving healthy dental structure while effectively debriding the root canal, thereby achieving successful and minimally invasive endodontic treatment for CDI.

Guided Endodontics: A Literature Review

The main objective of this paper is to perform an updated literature review of guided endodontics based on the available up-to-date scientific literature to identify and describe the technique, its benefits, and its limitations. Four electronic databases (PubMed, Scopus, Science Direct, and Web of Science) were used to perform a literature search from 1 January 2017 to 13 May 2022. After discarding duplicates, out of 1047 results, a total of 29 articles were eligible for review. Guided endodontics is a novel technique that is currently evolving. It is applied in multiple treatments, especially in accessing and locating root canals in teeth with pulp canal obliteration, microsurgical endodontics, and removing glass fiber posts in endodontic retreatments. In addition, it is independent of an operator's experience, requires less treatment time for the patient, and is more accurate and safer than conventional endodontics.

Guided Endodontics: Static vs. Dynamic Computer-Aided Techniques-A Literature Review

(1) Background: access cavity preparation is the first stage of non-surgical endodontic treatment. The inaccuracy of this step may lead to numerous intraoperative complications, which impair the root canal treatment's prognosis and therefore the tooth's survival. Guided endodontics, meaning computer-aided static (SN) and dynamic navigation (DN) techniques, has recently emerged as a new approach for root canal location in complex cases. This review aims to compare SN and DN guided endodontics' techniques in non-surgical endodontic treatment. (2) Methods: an electronic search was performed on PubMed, Scopus, and Cochrane Library databases until October 2021. Studies were restricted by language (English, Spanish and Portuguese) and year of publication (from 2011 to 2021). (3) Results: a total of 449, 168 and 32 articles were identified in PubMed, Scopus, and Cochrane Library databases, respectively, after the initial search. Of the 649 articles, 134 duplicates were discarded. In this case, 67 articles were selected after title and abstract screening, of which 60 were assessed for eligibility through full-text analysis, with one article being excluded. Four cross-references were added. Thus, 63 studies were included. (4) Conclusions: guided endodontics procedures present minimally invasive and accurate techniques which allow for highly predictable root canal location, greater tooth structure preservation and lower risk of iatrogenic damage, mainly when performed by less experienced operators. Both SN and DN approaches exhibit different advantages and disadvantages that make them useful in distinct clinical scenarios.

Minimally invasive treatment of calcified root canals in anterior teeth with digital guide technique

OBJECTIVES

This study aims to establish a minimally invasive treatment using a customized digital template and a miniaturized bur for pulp canal obliteration (PCO).

METHODS

Cone-beam computed tomography (CBCT) and digital oral scans of patients diagnosed with PCO in anterior teeth were obtained. Root canal morphology was reconstructed to accurately show the location, length, and direction of obliteration. A digital template was designed and fabricated using visual design software and 3D printing technology and used as guide for the miniaturized bur and drill sleeve during calcified tissue removal. A conventional root canal treatment was performed after the lumen of the root canal was reached.

RESULTS

In both cases, the planned access cavity and glide paths were successfully established. In case 1, the deviated angle of the access cavity was 1.37°±0.07°, the deviation at the bottom of the miniaturized bur was 0.08-0.81 mm, the deviation at the tip of the bur was 0.05-1.13 mm, and difference in substance loss was 0.84-4.25 mm³. In case 2, the deviated angle of the access cavity was 3.09° ± 0.12°, the deviation at the bottom of the bur was 0.09-0.68 mm, the deviation at the tip of the bur was 0.29-0.66 mm, and the difference in substance loss was 0.55-3.79 mm3.

CONCLUSIONS

Micro-guided endodontics is a novel approach for localizing and negotiating obliterated root canals and guarantees long-term prognosis without requiring excessive hard tissue removal.

Effect of Computer-Aided Navigation Techniques on the Accuracy of Endodontic Access Cavities: A Systematic Review and Meta-Analysis

The present systematic review and meta-analysis aims to determine the effect of computer-aided navigation techniques on the accuracy of endodontic access cavities.

MATERIALS AND METHODS

A systematic literature review and meta-analysis of clinical studies, based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) recommendations, was performed that evaluated the root canal location rate of computer-aided navigation techniques applied to endodontic access cavities. Four different databases were used to consult the literature: PubMed-Medline, Scopus, Cochrane, and Web of Science. After discarding duplicate articles and applying inclusion criteria, 14 articles were selected for qualitative analysis and 13 for quantitative analysis.

RESULTS

the root canal location success rate started at 98.1% (CI: 95.7-100%) of the cases performed through a computer-aided navigation technique. The prediction interval ranged from 93.3% to 100%. The meta-analysis did not detect heterogeneity between the combined studies (Q-test = 17.3; p = 0.185; I² = 25%). No statistically significant differences were found between computer-aided static navigation techniques (success rate: 98.5%) and computer-aided dynamic navigation techniques (success rate: 94.5%) (Q test = 0.57; p = 0.451), nor between in vitro studies (success rate: 96.2%) and in vivo studies (success rate: 100%) (Q test = 2.53; p-value = 0.112). An odds success ratio of 13.1 (CI: 95%; 3.48, 49.1) encourages the use of computer-aided navigation techniques over conventional endodontic access cavity procedures.

CONCLUSIONS

the endodontic access cavities created using static and dynamic computer-aided navigation techniques are highly accurate in locating the root canal system.

Efficacy of Computer-Aided Static Navigation Technique on the Accuracy of Endodontic Microsurgery. A Systematic Review and Meta-Analysis

The aim of this systematic review and meta-analysis was to analyze the efficacy of the computer-aided static navigation technique on the accuracy of root apex location in endodontic microsurgery.

MATERIAL AND METHODS

A systematic literature review and meta-analysis, based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) recommendations, of clinical studies that evaluated the apex location rate of the computer-aided static navigation techniques applied to endodontic microsurgery. A total of four databases were consulted in the literature search: Pubmed-Medline, Scopus, Cochrane, and Web of Science. After eliminating duplicated articles and applying the inclusion criteria, seven articles were selected for the qualitative and the quantitative analysis.

RESULTS

The root apex location success rate stated at 96.8% (confidence interval (CI): 93.0-100%) of the cases performed through a computer-aided static navigation technique. The prediction interval ranges from 91.4% to 100%. The meta-analysis did not detect heterogeneity between the combined studies (Q-test = 6.15; p-value = 0.407; I2 = 2.4%). The computer-aided static navigation techniques showed a root apex location success rate 27 times higher than conventional endodontic microsurgery procedures (Q test = 0.80; p = 0.671; I2 = 0%). Three studies of computer-aided static navigation techniques and control group were compared using a random effects model with the Mantel-Haenszel method with a statistically significant odds success ratio of 27.7, with a 95% confidence interval between 11.3 and 68.1 (z test = 7.23; p < 0.0001).

CONCLUSIONS

According to in vitro studies analyzed, endodontic microsurgeries performed through computer-aided static navigation techniques show a high precision.

Guided endodontic treatment of multiple teeth with dentin dysplasia: a case report

Background

To report the outcome of guided endodontic treatment (GET) of a case of dentin dysplasia with pulp canal calcification (PCC) and apical periodontitis based on the use of a 3D-printed template designed by merging cone-beam computed tomography (CBCT) and surface scan data.

Case presentation

A 12-year old female with radicular dentin dysplasia type I (DD-1) presented for endodontic treatment. Radiography revealed PCC in all teeth and apical radiolucency in seven teeth (12, 15, 26, 31, 32, 36 and 46). Tooth 36 had the most acute symptoms and was thus treated first by conventional access cavity preparation and root canal detection. Despite meticulous technique, the distal and mesiolingual canals were perforated. The perforations were immediately repaired with mineral trioxide aggregate, and the decision was made to switch to guided endodontic treatment for the remaining 6 teeth. CBCT and intraoral surface scans were acquired and matched using coDiagnostix planning software (Dental Wings Inc.), the respective drill positions for root canal location were determined, and templates were virtually designed and 3D-printed. The template was positioned on the respective tooth, and a customized drill was used to penetrate the calcified part of the root canal and perform minimally invasive access cavity preparation up to the apical region. All root canals were rapidly and successfully located with the templates. At 1-year follow-up, clear signs of apical healing were present in all treated teeth.

Conclusions

In patients with dentin dysplasia, conventional endodontic therapy is challenging. GET considerably facilitates the root canal treatment of teeth affected by dentin dysplasia.

[Guided endodontic access of calcified root canal by laser melting templates]

OBJECTIVE

The aim of this study is to treat calcified root canal and assess the accuracy of guided endodontics using laser melting templates.

METHODS

Two cases with calcified anterior teeth were treated with laser melting templates. Cone beam computed tomography (CBCT) was used to scan the maxillary teeth of patients before surgery to establish the root canal system model. The maxillary impression of the patient was made and it was scanned by a 3D scanner. The CBCT scans were matched with surface scans of plaster model. Mimics 19.0 and 3-matic 11.0 software were used to design the virtual planning to access cavities. The templates were produced by laser melting 3D printing. Access cavity was prepared under the guidance of laser melting template. Then the deviations of planned and prepared cavities in three dimensions and angle were measured.

RESULTS

The two teeth obtained satisfactory results. The first case had a angle deviation of 1.77°, a drilling base deviation of 0.403-0.497 mm, and a tip of 0.433-0.537 mm. The second case had a angle deviation of 3.26°, a drill base deviation of 0.18-0.347 mm, and a tip of 0.310-0.463 mm.

CONCLUSIONS

Laser melting template-guided endodontics is an effective technique for the treatment of calcified root canal and can be used as a new strategy for the treatment of calcified canal.