1
|
Zoppe JO, Ataman NC, Mocny P, Wang J, Moraes J, Klok HA. Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes. Chem Rev 2017; 117:1105-1318. [PMID: 28135076 DOI: 10.1021/acs.chemrev.6b00314] [Citation(s) in RCA: 600] [Impact Index Per Article: 85.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
Abstract
The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.
Collapse
Affiliation(s)
- Justin O Zoppe
- Institut des Matériaux and Institut des Sciences et Ingénierie Chimiques, Laboratoire des Polymères Bâtiment MXD, Ecole Polytechnique Fédérale de Lausanne (EPFL) , Station 12 CH-1015 Lausanne, Switzerland
| | - Nariye Cavusoglu Ataman
- Institut des Matériaux and Institut des Sciences et Ingénierie Chimiques, Laboratoire des Polymères Bâtiment MXD, Ecole Polytechnique Fédérale de Lausanne (EPFL) , Station 12 CH-1015 Lausanne, Switzerland
| | - Piotr Mocny
- Institut des Matériaux and Institut des Sciences et Ingénierie Chimiques, Laboratoire des Polymères Bâtiment MXD, Ecole Polytechnique Fédérale de Lausanne (EPFL) , Station 12 CH-1015 Lausanne, Switzerland
| | - Jian Wang
- Institut des Matériaux and Institut des Sciences et Ingénierie Chimiques, Laboratoire des Polymères Bâtiment MXD, Ecole Polytechnique Fédérale de Lausanne (EPFL) , Station 12 CH-1015 Lausanne, Switzerland
| | - John Moraes
- Institut des Matériaux and Institut des Sciences et Ingénierie Chimiques, Laboratoire des Polymères Bâtiment MXD, Ecole Polytechnique Fédérale de Lausanne (EPFL) , Station 12 CH-1015 Lausanne, Switzerland
| | - Harm-Anton Klok
- Institut des Matériaux and Institut des Sciences et Ingénierie Chimiques, Laboratoire des Polymères Bâtiment MXD, Ecole Polytechnique Fédérale de Lausanne (EPFL) , Station 12 CH-1015 Lausanne, Switzerland
| |
Collapse
|
2
|
Synthesis and optimization of fluorescent poly(N-isopropyl acrylamide)-coated surfaces by atom transfer radical polymerization for cell culture and detachment. Biointerphases 2014; 10:019001. [PMID: 25708629 DOI: 10.1116/1.4894530] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
Although there are many stimulus-responsive polymers, poly(N-isopropyl acrylamide) (pNIPAM) is of special interest due to the phase change it undergoes in a physiologically relevant temperature range that leads to the release of cells and proteins. The nondestructive release of cells opens up a wide range of applications, including the use of pNIPAM for cell sheet and tissue engineering. In this work, pNIPAM surfaces were generated that can be distinguished from the extracellular matrix. A polymerization technique was adapted that was previously used by Mendez, and the existing protocol was optimized for the culture of mammalian cells. The resulting surfaces were characterized with X-ray photoelectron spectroscopy and goniometry. The developed pNIPAM surfaces were further adapted by incorporation of 5-acrylamidofluorescein to generate fluorescent pNIPAM-coated surfaces. Both types of surfaces (fluorescent and nonfluorescent) sustained cellular attachment and produced cellular detachment of ∼90%, and are therefore suitable for the generation of cell sheets for engineered tissues and other purposes. These surfaces will be useful tools for experiments investigating cellular detachment from pNIPAM and the pNIPAM/cell interface.
Collapse
|
3
|
Balamurugan SS, Subramanian B, Bolivar JG, McCarley RL. Aqueous-based initiator attachment and ATRP grafting of polymer brushes from poly(methyl methacrylate) substrates. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2012; 28:14254-60. [PMID: 22967226 PMCID: PMC3525093 DOI: 10.1021/la302922p] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
Many polymers, such as PMMA, are very susceptible to swelling or dissolution by organic solvents. Growing covalently attached polymer brushes from these surfaces by atom-transfer radical polymerization (ATRP) is challenging because of the typical requirement of organic solvent for initiator immobilization. We report an unprecedented, aqueous-based route to graft poly(N-isopropylacrylamide), PNIPAAm, from poly(methyl methacrylate), PMMA, surfaces by ATRP, wherein the underlying PMMA is unaffected. Successful attachment of the ATRP initiator, N-hydroxysuccinimidyl-2-bromo-2-methylpropionate, on amine-bearing PMMA surfaces was confirmed by XPS. From this surface-immobilized initiator, thermoresponsive PNIPAAm brushes were grown by aqueous ATRP to yield optically transparent PNIPAAm-grafted PMMA surfaces. This procedure is valuable, as it can be applied for the aqueous-based covalent attachment of ATRP initiator on any amine-functionalized surface, with subsequent polymerization of a variety of monomers.
Collapse
Affiliation(s)
- Sreelatha S. Balamurugan
- Department of Chemistry, Louisiana State University, Baton Rouge, Louisiana 70803-1804, United States
| | - Balamurugan Subramanian
- Department of Chemistry, Louisiana State University, Baton Rouge, Louisiana 70803-1804, United States
| | - Jowell G. Bolivar
- The Wright Group, 6428 Airport Road, Crowley, Louisiana 70526, United States
| | - Robin L. McCarley
- Department of Chemistry, Louisiana State University, Baton Rouge, Louisiana 70803-1804, United States
- Corresponding Author:
| |
Collapse
|
4
|
Lee BS, Han DK, Son TI, Jung YH. Surface Modification Using Spiropyran-Derivative and Its Analysis of Surface Potential Induced by UV. JOURNAL OF THE KOREAN CHEMICAL SOCIETY-DAEHAN HWAHAK HOE JEE 2011. [DOI: 10.5012/jkcs.2011.55.3.478] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
|
5
|
Barbey R, Lavanant L, Paripovic D, Schüwer N, Sugnaux C, Tugulu S, Klok HA. Polymer brushes via surface-initiated controlled radical polymerization: synthesis, characterization, properties, and applications. Chem Rev 2010; 109:5437-527. [PMID: 19845393 DOI: 10.1021/cr900045a] [Citation(s) in RCA: 1218] [Impact Index Per Article: 87.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Affiliation(s)
- Raphaël Barbey
- Ecole Polytechnique Fédérale de Lausanne (EPFL), Institut des Matériaux, Laboratoire des Polymères, Bâtiment MXD, Station 12, CH-1015 Lausanne, Switzerland
| | | | | | | | | | | | | |
Collapse
|
6
|
Kong B, Choi JS, Jeon S, Choi IS. The control of cell adhesion and detachment on thin films of thermoresponsive poly[(N-isopropylacrylamide)-r-((3-(methacryloylamino)propyl)-dimethyl(3-sulfopropyl)ammonium hydroxide)]. Biomaterials 2009; 30:5514-22. [DOI: 10.1016/j.biomaterials.2009.07.016] [Citation(s) in RCA: 42] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/25/2009] [Accepted: 07/08/2009] [Indexed: 10/20/2022]
|
7
|
Ernst O, Lieske A, Holländer A, Lankenau A, Duschl C. Tuning of thermo-responsive self-assembly monolayers on gold for cell-type-specific control of adhesion. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2008; 24:10259-10264. [PMID: 18715027 DOI: 10.1021/la801026y] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
Self-assembled monolayers (SAMs) on gold containing a thermo-responsive poly( N-isopropylacrylamide)-poly(ethylene glycol)-thiol copolymer were formed. These layers show considerable potential for inducing enzyme-free and gentle detachment of cultivated cells. In an effort to optimize detachment of cells, including strongly adhering ones, two approaches are presented. First, two thermo-responsive copolymers with different poly(ethylene glycol) (PEG) contents of 15 wt % ("P15") and 19 wt % ("P19") were grafted to Au surfaces. Second, mixed monolayers were formed containing P19 and various concentrations of thiol bearing PEG. X-ray photoelectron spectroscopy (XPS) on pure and mixed P19 containing layers confirmed the expected layer compositions. Contact angle measurements showed good functionality of all surfaces prepared. Upon a temperature decrease below the lower critical solution temperature (LCST), the duration until cultivated fibroblasts detached from pure P19 surfaces was half of the one determined on P15. Strongly adherent human osteosarcoma cells could not be detached from pure P19 layers. Through co-adsorption of P19 and thiol-bearing PEG of a molar composition of 1:6, layers were formed that allowed good spreading of osteosarcoma cells above LCST and their efficient detachment below LCST.
Collapse
Affiliation(s)
- Oliver Ernst
- Fraunhofer Institute for Biomedical Engineering, Am Mühlenberg 13, Potsdam, Germany
| | | | | | | | | |
Collapse
|
8
|
Kim DJ, Kang SM, Kong B, Kim WJ, Paik HJ, Choi H, Choi IS. Formation of Thermoresponsive Gold Nanoparticle/PNIPAAm Hybrids by Surface-Initiated, Atom Transfer Radical Polymerization in Aqueous Media. MACROMOL CHEM PHYS 2005. [DOI: 10.1002/macp.200500268] [Citation(s) in RCA: 134] [Impact Index Per Article: 7.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
|
9
|
Kim DJ, Lee KB, Lee TG, Shon HK, Kim WJ, Paik HJ, Choi IS. Biomimetic micropatterning of silica by surface-initiated polymerization and microcontact printing. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2005; 1:992-6. [PMID: 17193384 DOI: 10.1002/smll.200400157] [Citation(s) in RCA: 39] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2023]
Abstract
Micropatterns of silica on a gold substrate were generated by a biomimetic approach, namely, the biosilicification of silicic acids. The procedure consists of three simple steps: pattern generation of a polymerization initiator, (BrC(CH(3))(2)COO(CH(2))(11)S)(2), by microcontact printing; surface-initiated, atom-transfer radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) from the patterned area; and polycondensation of silicic acids. The tertiary amine-containing polymer, pDMAEMA, aided in the spatially controlled polycondensation of silicic acids on surfaces in the presence of phosphate ions, and micropatterns of silica on a gold substrate were successfully generated in combination with the technique of microcontact printing. The procedure could be extended to the controlled fabrication of silica patterns with any size, shape, or thickness.
Collapse
Affiliation(s)
- Dong Jin Kim
- Department of Chemistry and School of Molecular Science (BK21), Center for Molecular Design and Synthesis, Korea Advanced Institute of Science and Technology, Daejeon 305-701, Korea
| | | | | | | | | | | | | |
Collapse
|