Solvent-free, Silica Catalyzed Intriguing Conversion of 3-Hydrazonobutan-2-one Oxime into Biacetyl Bis-hydrazone Schiff Bases

:

An expeditious and operationally simple reaction between 3-hydrazonobutan-2-one oxime and different substituted benzaldehydes in presence of silica afforded an unexpected product, biacetyl bis-hydrazone Schiff bases in good yield on grinding in a mortar at room temperature, instead of expected product 3-(aryl)methylenehydrazonobutan-2-one oxime. Mild reaction conditions involving recyclable mineral support silica, environmentally benign and good yield in short reaction time are remarkable advantages of this protocol. Products were characterized by IR, NMR (1H and 13C) and elemental analyses.

Electrochemical Sensors Containing Schiff Bases and their Transition Metal Complexes to Detect Analytes of Forensic, Pharmaceutical and Environmental Interest. A Review

Schiff bases and their transition metal complexes are inexpensive and easy to synthesize. These compounds display several structural and electronic features that allow their application in numerous research fields. Over the last three decades, electroanalytical scientists of various areas have developed electrochemical sensors from many compounds. The present review discusses the applicability of Schiff bases, their transition metal complexes and new materials containing these compounds as electrode modifiers in sensors to detect analytes of forensic, pharmaceutical and environmental interest. In forensic sciences, Schiff bases are mainly used to analyze illicit drugs: chemical reactions involving Schiff bases can help to elucidate illicit drug production and to determine analytes in seized samples. In the environmental area, given that most methodologies provide Limit of Detection (LOD) values below the values recommended by regulatory agencies, Schiff bases constitute a promising strategy. As for pharmaceutical applications, Schiff bases represent an approach for analysis of complex biological samples containing low levels of the target analytes in the presence of a large quantity of interfering compounds. This review will show that new highly specific materials can be synthesized based on Schiff bases and applied in the pharmaceutical industry, toxicological studies, electrocatalysis and biosensors. Most literature papers have reported on Schiff bases combined with carbon paste to give a chemically modified electrode that is easy and inexpensive to produce and which displays specific and selective sensing capacity for different applications.

Bach adsorption study for the extraction of silver ions by hydrazone compounds from aqueous solution

Sorbent materials based on a hydrazone Schiff base compound, C₁₄H₁₁BrN₄O₄, were prepared either by immobilizing the ligand into sol-gel (SG1) or bonding to silica (SG2). The sorbent materials were characterized by FT-IR, EDX, SEM, TEM, and TGA. The sorption characteristics of a matrix of eight transition metal ions (Ag⁺, Cu²⁺, Co²⁺, Ni²⁺, Fe³⁺, Pb²⁺, Zn²⁺, and Mn²⁺) using batch method were studied. Several key parameters that affected the extraction efficiency such as pH, contact time, metal ions concentration, and gel size (for SGl) were investigated and optimized. Under the optimized conditions, the physically immobilized hydrazone sorbent (SG1) exhibits highest selectivity towards Ag⁺ ions, while the chemically bonded hydrazone sorbent (SG2) exhibits high extraction for all metal ions tested. However, for practical applications such as the removal and preconcentration of Ag⁺, the physically immobilized sorbent (SG1) is preferred.

Developments in the Field of Conducting and Non-conducting Polymer Based Potentiometric Membrane Sensors for Ions Over the Past Decade

Many research studies have been conducted on the use of conjugated polymers in the construction of chemical sensors including potentiometric, conductometric and amperometric sensors or biosensors over the last decade. The induction of conductivity on conjugated polymers by treating them with suitable oxidizing agents won Heeger, MacDiarmid and Shirakawa the 2000 Nobel Prize in Chemistry. Common conjugated polymers are poly(acetylene)s, poly(pyrrole)s, poly(thiophene)s, poly(terthiophene)s, poly(aniline)s, poly(fluorine)s, poly(3-alkylthiophene)s, polytetrathiafulvalenes, polynapthalenes, poly(p-phenylene sulfide), poly(p-phenylenevinylene)s, poly(3,4-ethylenedioxythiophene), polyparaphenylene, polyazulene, polyparaphenylene sulfide, polycarbazole and polydiaminonaphthalene. More than 60 sensors for inorganic cations and anions with different characteristics based on conducting polymers have been reported. There have also been reports on the application of non-conducting polymers (nCPs), i.e. PVC, in the construction of potentiometric membrane sensors for determination of more than 60 inorganic cations and anions. However, the leakage of ionophores from the membranes based on these polymers leads to relatively lower life times. In this article, we try to give an overview of Solid-Contact ISE (SCISE), Single-Piece ISE (SPISE), Conducting Polymer (CP)-Based, and also non-conducting polymer PVC-based ISEs for various ions which their difference is in the way of the polymer used with selective membrane. In SCISEs and SPISEs, the plasticized PVC containing the ionophore and ionic additives govern the selectivity behavior of the electrode and the conducting polymer is responsible of ion-to-electron transducer. However, in CPISEs, the conducting polymer layer is doped with a suitable ionophore which enhances the ion selectivity of the CP while its redox response has to be suppressed.

Schiff's Bases and Crown Ethers as Supramolecular Sensing Materials in the Construction of Potentiometric Membrane Sensors

Ionophore incorporated PVC membrane sensors are well-established analyticaltools routinely used for the selective and direct measurement of a wide variety of differentions in complex biological and environmental samples. Potentiometric sensors have someoutstanding advantages including simple design and operation, wide linear dynamic range,relatively fast response and rational selectivity. The vital component of such plasticizedPVC members is the ionophore involved, defining the selectivity of the electrodes' complexformation. Molecular recognition causes the formation of many different supramolecules.Different types of supramolecules, like calixarenes, cyclodextrins and podands, have beenused as a sensing material in the construction of ion selective sensors. Schiff's bases andcrown ethers, which feature prominently in supramolecular chemistry, can be used assensing materials in the construction of potentiometric ion selective electrodes. Up to now,more than 200 potentiometric membrane sensors for cations and anions based on Schiff's bases and crown ethers have been reported. In this review cation binding and anioncomplexes will be described. Liquid membrane sensors based on Schiff's bases and crownethers will then be discussed.

Lanthanide Recognition: an Asymetric Erbium Microsensor Based on a Hydrazone Derivative

N'-(2-hydroxy-1,2-diphenylethylidene)benzohydrazide (HDB) was found tohave a very selective and sensitive behavior towards erbium(III) ions, in comparison tothirteen lanthanide ions, inner transition and representative metal ions and was hence usedas a neutral ion carrier in construction of an Er(III) microelectrode. Theoretical calculationsand conductance studies of HDB to erbium and some other metal ions were carried out andconfirmed selectivity toward Er(III) ions.The best performance was obtained with a membrane contain 3% potassium tetrakis(p-chlorophenyl)borate (KTpClPB) as an anionic additive, 72% dibutyl phthalate (DBP) assolvent mediator, 5% HDB, and 20% poly(vinyl chloride) (PVC). The proposed Er(III)microelectrode exhibits a near Nernstian response of 17.5±0.5 mV per decade of erbiumactivity, and a very wide linear range 1.0×10-3-3.0×10-10 M. It can work well in the pHrange of 3.0-9.0. The lower detection limit (LDL) of the microelectrode was calculated tobe 2.0×10-10 M.

Ytterbium-selective polymeric membrane electrode based on substituted urea and thiourea as a suitable carrier

Plasticized membranes using 1-phenyl-3-(2-thiazolyl)-2-thiourea (PTT) and 1-phenyl-3-(2-thiazolyl)-2-urea (PTU) have been prepared and explored as ytterbium ion-selective sensors. Effect of various plasticizers, viz. chloronaphthalene (CN), o-nitrophenyloctyl ether (o-NPOE), dibutylphthalate (DBP), dioctylsebacate (DOS) and anion excluders, sodium tetraphenylborate (NaTPB) and oleic acid (OA) was studied and improved membrane performance was observed. Optimum performance was noted with membrane of PTT having composition of PTT (3.5):PVC (80):DOS (160):NaTPB (1.5) in mg. The sensor works satisfactorily in the concentration range 1.2x10(-7) to 1.0x10(-2) M (detection limit 5.5x10(-8) M) with a Nernstian slope of 19.7 mV decade(-1) of activity. Wide pH range (3.0-8.0), fast response time (10 s), non-aqueous tolerance (up to 20%) and adequate shelf life (12 weeks) indicate the vital utility of the proposed sensor. The proposed electrode comparatively shows good selectivity for Yb3+ ion with respect to alkali, alkaline earth, transition and rare earth metals ions and can be used for its determination in binary mixtures and sulfite determination in white and red wine samples.

A Selective Membrane Electrode for Lanthanum(III) Ion Based on a Hexaaza Macrocycle Derivative as Ionophore

We have developed a highly La(III)-selective PVC membrane electrode based on a hexaaza macrocycle, 8,16-dimethyl-6,14-diphenyl-2,3,4:10,11,12-dipyridine-1,3,5,9,11,13-hexaazacyclohexadeca-3,5,8,11,13,16-hexaene [Bzo2Me2Pyo2(16)-hexaeneN6] (I) as membrane carrier, dibutylbutyl phosphonate (DBBP) as solvent mediator and sodium tetraphenylborate (NaTPB) as lipophilic additive. The best performance was given by the membrane of macrocycle I having a composition 10:260:5:120 (I:DBBP:NaTPB:PVC). The electrode exhibits a Nernstian response to La(III) ion in the concentration range 1.0x10(-1)-7.94x10(-7) M with a slope of 19.8+/-0.2 mV/decade of concentration and a detection limit of 5.62x10(-7) M. The response time of the sensor is 12 s and it can be used over a period of 4 months with good reproducibility. The electrode works well over a pH range of 2.5-10.0 and in partially non-aqueous medium with up to 30% organic content. The sensor was also used as an indicator electrode in potentiometric titration of La(III) ions with EDTA and for determining La(III) concentration in real samples.