Spiral computed tomography based maxillary sinus imaging in relation to tooth loss, implant placement and potential grafting procedure

A comparative analysis of sphenoid and frontal sinuses using cone beam computed tomography for sex determination

Objectives

This study aimed to evaluate linear measurements of the frontal sinus (FS) and sphenoid sinus (SS) for sex identification on cone beam computed tomography (CBCT) images.

Methods

A comparative CBCT analysis was conducted on 200 full field of view (FOV) scans taken as part of routine dental investigations. Dimensions of the bilateral frontal and sphenoid sinuses were measured. Intra- and interobserver reliability were calculated. Independent t tests were used to compare the various parameters between sexes. Stepwise discriminant function analysis was used to determine sex. Additionally, the receiver operating characteristic (ROC) curve, area under the curve (AUC), sensitivity, and specificity were also determined. A p value < 0.05 was considered significant.

Results

A total of 200 CBCT scans were included in the study. The mean age (±SD) among males was 25.66 (±7.11) and that among females was 24.64 (±5.12). The ROC curve revealed that the right length of the frontal sinus showed the greatest accuracy in sex identification in comparison to other linear measurements of the FS and SS. The results of our study indicated that the equation obtained from stepwise discriminant function analysis can aid in sex determination with an accuracy of 76.5 %.

Conclusion

Our findings support the sexual dimorphism of linear measurements of FS and SS. There was an improvement in the accuracy of sex prediction when the linear measurements of FS and SS were considered in combination rather than in isolation. The derived equation can be an adjunctive tool for sex identification for the representative population.

Computed tomography assessment of maxillary sinus hypoplasia and associated anatomical variations: a systematic review and meta-analysis of global evidence

OBJECTIVE

To summarize the scientific evidence on the prevalence of maxillary sinus hypoplasia (MSH) and associated anatomical variations as assessed by computed tomography scans.

STUDY DESIGN

This PROSPERO-registered systematic review followed the recommendations of the PRISMA guidelines. Search algorithms were constructed for each of the six databases and gray literature. After screening the references (Rayyan®), the extracted data were meta-analyzed according to a random-effects model. The joanna briggs critical appraisal tool assessed the methodological quality of the included studies. The GRADE approach was used to estimate the certainty of the evidence.

RESULTS

From a total of 2781 studies screened, 22 were considered for four meta-analysis. The prevalence of MSH in 7358 patients was 5.65% (CI95% = 4.07-7.47%) with significant heterogeneity between studies (p < 0.001, I2 = 89.30%). MSH was identified in 295 patients, of whom 82.38% (CI95% = 75.82-88.09%) had unilateral hypoplasia and 17.62% (CI95% = 11.91-24.18%) bilateral hypoplasia with moderate heterogeneity between studies (p < 0.0503, I2 = 42.87%). The prevalence of MSH in 9998 maxillary sinuses was 3.77% (95% CI = 2.44-5.38%), with significant heterogeneity between studies (p < 0.001, I2 = 92.84%). Hypoplastic/aplastic uncinate process, concha bullosa and paradoxical concha were the most reported anatomical variations. The studies presented a low-moderate methodological quality. The certainty of the evidence was very low to moderate.

CONCLUSION

The prevalence of maxillary sinus hypoplasia observed was 5.65%, with most cases being unilateral.

Diagnosis of Odontogenic Maxillary Sinusitis by Cone-beam Computed Tomography: A Critical Review

INTRODUCTION

This review aims to provide an up-to-date overview of the current applications of cone-beam computed tomography (CBCT) and other imaging modalities in diagnosing odontogenic maxillary sinusitis (OMS). Furthermore, the clinical operation procedures of radiography modalities in OMS diagnosis were summarized, with the goal of assisting clinicians in improving OMS diagnostic accuracy in clinical practice.

METHOD

A comprehensive review of researches that discussed the applications of radiography modalities in the diagnosis of OMS was conducted. Pertinent information was evaluated and organized for this review.

RESULTS

Cone-beam computed tomography (CBCT) offers a superior, high-resolution, and three-dimensional view of the maxillary tooth-bone-sinus complex compared to conventional radiography modalities. It enables a better understanding and classification of the spatial relationships between root apices/periapical lesions and maxillary sinus. The use of CBCT, combined with the advantages of other radiography modalities and proper image interpretation, is indispensable to enhance OMS diagnostic accuracy and mitigate the risk of missed or misdiagnosis.

CONCLUSION

The significance of CBCT in the diagnosis of oral and maxillofacial conditions has garnered widespread recognition. It provides highly precise diagnostic information and classification basis for OMS. The clinical operation procedures for imaging examination are essential in ensuring the consistency and reliability of the diagnosis.

The Impact of Maxillary Sinus Pneumatization on the Quality of the Alveolar Bone in Dentated and Edentulous Patients: A Cone-Beam Computed Tomography Radiographic Analysis

Background This study aimed to describe the morphometric differences of maxillary alveolar bone's height, width, and densitometric differences in the posterior region where maxillary sinus pneumatization occurred. Methodology A cross-sectional, cone-beam computed tomography (CBCT) study used 123 CBCT images as a non-randomized convenient sample of sinus pneumatized cases. Bone height, bone width (in mm), and average density of the remaining ridge of all patients were used as study variables. Analysis of the qualitative variables were as frequency and percentages. Parametric Student's t-test and non-parametric chi-squared tests were used to compare the groups. The significance level was set at a p-value ≤0.05. Results The sample included CBCT radiographs for patients who had a mean age of 42.79 ± 12.32 with males constituting 69 (56.1%) of the patients. There was no gender difference between the present and missing teeth at the measured sites of the first premolar, second premolar, first molar, and second molar (p > 0.05). The mean measurements of height and average bone density were significantly higher in the dentate sites; however, the mean width was higher in the edentulous sites (p = 0.001). Conclusions Average bone height and density were significantly decreased at the edentulous sites of sinus pneumatized cases than the dentate sites with no gender difference.

Radiographic evaluation of the anatomical relationship of maxillary sinus floor with maxillary posterior teeth apices in the population of Al-Qassim, Saudi Arabia, using cone beam computed tomography

Background & objective

In current clinical dental practice radiographic imaging plays a major role in exploring the relationship between the maxillary sinus floor (MSF) and maxillary posterior teeth root apices, especially when there is an involvement of pathology in the periapical area that may lead to infectious, inflammatory or traumatic changes in the maxillary sinus (MS). It is also essential for exact implant placement, and therapeutic and surgical plans. The prevalence of different forms of anatomic relationship of the MSF to posterior root apices from one population to another is large. Hence the current research was conceived to evaluate the horizontal and vertical relationship forms of posterior root apices to the MSF in the Al-Qassim population of Saudi Arabia using Cone Beam Computed Tomography (CBCT).

Materials and methods

To conduct the study, a total of 200 patients' data (100 male and 100 female) were taken from the archives. The linear distances of the root apices to the MSF were measured for maxillary posterior teeth. On cross-sectional CBCT images, the Kwak et al. criteria were used to assess the horizontal and vertical relationships between the root apices of maxillary posterior teeth and the MSF.

Results

The mean distance between the apices of the maxillary second premolar ranged from 4.63 mm to 6.49 mm. The mean value of the distance between the apices of the posterior teeth and the MSF had a range of 0.68 ± 0.39 mm on the disto-buccal root (DBR) of the maxillary right second molar to 3.93 ± 1.26 mm on the palatal root (PR) of the maxillary left first molar. A similar result was observed in the maxillary second molar DBR in the male group (0.68 ± 1.17 mm) and the female group (0.69 ± 1.17 mm). The most frequently observed vertical relations were type 2 and type 2H horizontal relations.

Conclusion

This study concludes that maxillary molar roots show greater proximity with the MSF when compared with premolars, and that the type 2 vertical and type 2H horizontal distribution suggests that the anatomy of each tooth and the maxillary sinus floor should be evaluated by CBCT prior to treatment planning.

Prevalence of maxillary sinus septa: systematic review and meta-analysis

The aim of this systematic review and meta-analysis was to determine the prevalence and characteristics of maxillary sinus septa using cone beam computed tomography and computed tomography data. Publications were searched until October 5, 2020 in three electronic databases. Additionally, article bibliographies were searched, and authors were contacted if required. This review has been registered in PROSPERO (CRD42019124933). Two independent evaluators assessed methodological quality using the Joanna Briggs Institute levels of evidence; inter-rater reliability tests were performed (Cohen's κ). The prevalence of maxillary sinus septa was expressed as a proportion; differences according to sex were reported in terms of the odds ratio (OR) and 95% confidence interval (95% CI). Heterogeneity and sources of heterogeneity were evaluated by meta-regression. Publication bias was assessed by visual analysis of the funnel plot. Statistical significance was set at P < 0.05. The 62 studies identified and included in the review involved 13,701 patients (22,460 sinuses). The meta-analysis of 35 studies (14,664 sinuses) revealed an overall mean sinus septa prevalence per sinus of 33.2% (95% CI 27.8-38.5%; I² = 98.32%). The meta-analysis of 42 studies (9631 patients) found an overall mean sinus septa prevalence per patient of 41.0% (95% CI 36.0-46.0%, I² = 96.45%). The OR for the difference in septa prevalence between sexes was 0.785 (95% CI 0.590-1.046; P = 0.098, I² = 73.24%). Septa were most frequent in the middle area of the sinus and with a transverse orientation (86.0%). Within the limitations, the results suggest a high proportion of septa in the sinus, commonly in the middle area, which can interfere with the success of sinus floor elevation required for implant rehabilitation.

Assessment of the relationship between the maxillary sinus and the canine root tip using cone beam computed tomography

BACKGROUND

The purpose of the present study is to investigate the relationship between the maxillary sinus and the canine root apices in cone beam computed tomographic images (CBCT) and to assess the amount of extension of the maxillary sinus to the anterior region of the jaw in different sexes and age groups.

METHODS

CBCT of 300 individuals (154 males and 146 females) over 20 years (with a mean age of 35.12 ± 8.40 years) were evaluated. The subjects were categorized into three age groups (20-30, 30-40, and 40-50 years). When the maxillary sinus extended to the canine area, the vertical distance between them was measured, and their relationship was classified into three types: I (more than 2 mm distance), II (less than 2 mm distance or in-contact), and III (interlock).

RESULTS

413 out of 600 maxillary sinuses (68.8%) were extended into the canine area or beyond. Among them, 15 maxillary sinuses pneumatized into the incisor area (2.5%). The prevalence of the maxillary sinuses extended to the anterior region of the jaw was not significantly different between genders. However, it was significantly less frequent in the older age group and more frequent on the left side. In addition, the mean amount of anterior extension of the maxillary sinus (mm) was significantly lower in the older age group. Type I was the most frequent vertical relationship between the maxillary sinuses and canine apices with no significant difference in gender, side, and age groups.

CONCLUSIONS

In most cases, the maxillary sinus extended to the canine area and sometimes reached the incisor region. This necessitates paying more attention to the maxillary anterior sextant during surgical procedures.

Volumetric and linear evaluation of the sphenoidal sinus of a Brazilian population, in cone beam computed tomography

The determination of sex from skeletal remains has been widely used in biological profile reconstruction since these are some of the last structures to perish after death. The sphenoid sinus is located deeply in the skull and is enveloped by diverse structures within the sphenoid body. It is, therefore, less predisposed to injuries and/or pathological changes. The aim of this study is to evaluate the possibility of determining sex in a Brazilian population by means of linear and volumetric measurements of the sphenoid sinus, in addition to identifying and quantifying the presence of extensions of this sinus in cone beam computed tomography (CBCT) scans. In total 268 CBCT scans were analysed, from patients aged between 22 and 70 years old, of which 145 were female, and 123 were male. The images, representative of a Brazilian population, were selected by a dental radiologist from a CBCT image bank. The volumetric measurements were made by means of the segmentation software ITK-SNAP 3.0® and the linear inferio-superior, latero-lateral and anteroposterior measurements, as well as the presence of extensions of the sphenoidal sinus, were made using the CS Imaging Software®. The results of this study suggested that when comparing men and women, there were no statistical differences in the linear measurements and extensions of the sphenoidal sinus, although the values were considerable in the extensions for the pterygoid processes and greater wings of the sphenoid bone, particularly in women. However, there was a statistically significant difference when the sphenoidal sinus volume was compared, as it was larger for men (11.364 mm³ ± 4.229 mm³) than for women (10.000 mm³ ± 3.615 mm³). In summary, the sphenoidal sinus volumetric measurements in CBCT exams are useful for determining the sex of unknown individuals.

Evaluation of maxillary sinus expansion in children due to maxillary first molar extraction

Purpose:

This study is aimed at understanding the effects of maxillary first molar extraction on the expansion of maxillary sinus in children.

Subjects and methods:

119 patients (aged 11-17 years) who had only one extracted maxillary first molar were included in the study. The superoinferior differences of the sinus floor position were measured in both dentate and edentulous sites on panoramic radiographs. The expansion of the maxillary sinus after maxillary first molar extraction was investigated in relation to fixed anatomic structures. The interorbital line (IL) and two zygomatic process lines (IZ) were used as a reference. The vertical distances between the IL and the inferior border of the maxillary sinus (IS) in edentulous (ISX) and in dentate sites (IST) were measured. The data was analyzed statistically.

Results:

The amount of maxillary sinus expansion in ISX was statistically significant in comparison to IST (p<0.001). The most prominent sinus expansions were found in subjects with extractions over six months prior to analysis (p<0.001). A negative correlation was detected between the amount of maxillary sinus expansion and IST (r = -0.438, p<0.001). There was a positive correlation between the amount of maxillary sinus expansion and IZT (r = 23.8, p<0.009).

Conclusion:

This study showed that the extraction of one maxillary first molar resulted in a negligible amount of sinus expansion in children. The results could be attributed to there being only one tooth extraction and a transferring of functional forces to the area of the neighboring teeth.

Revisited maxillary sinus pneumatization narrative of observation in Al-Madinah Al-Munawwarah, Saudi Arabia: A retrospective cross-sectional study

Objectives

Maxillary sinus pneumatization (MSP), is linked worldwide to number of factors. MSP measurements and assessment alongside potential correlates in Al-Madinah Al-Munawwarah, Saudi Arabia (SA) awaits identification.

Materials and methods

A retrospective cross-sectional study was conducted at Taibah University Dental-College and Hospital, Al-Madinah Al-Munawwarah; SA. The analysis included 700 female patients digital Orthopantomogram (OPG), of which 535 (76%) OPGs were usable. MSP was established according to the distance between the maxillary sinus floor and posterior teeth apices number 15, 16, 17, 18, 25, 26, 27 and 28. MSP categorized as followed: Sever MSP (Category I), Moderate MSP (Category II) and No MSP/normal (Category III). Descriptive statistics, and inferential analysis were carried out.

Results

Mean age of the patients was 30.11 (±10.26) and 290 (54.5%) were Saudi nationals. Severe pneumatization (category I) was prominent in the right and left first and second molars, 16, 26, 17, 27 (66%, 64%, 63% and 62%, respectively). A statistically significant difference (P < 0.0005) was observed between pneumatization categories in all sites. Furthermore, the impact of young age on levels of MSP was statistically significant (P < 0.05) on most teeth. However, nationality was non-significantly (P > 0.05) associated with MSP levels.

Conclusion

High percentages of female patients showed bilateral sever MSP in the upper molar area, specifically, young age group.

Clinical significance

The oro-antral communication during extraction and surgical cases of female patients' maxillary teeth is possible. This should be considered during dentists' daily practice in this geographic area of SA.

Maxillary Sinus Dimensions Decrease as Age and Tooth Loss Increase

OBJECTIVE

To investigate the correlation between patient-dependent variables and dimensional variations of the maxillary sinus.

METHODS

In this cross-sectional study, a total of 394 individual cone-beam computed tomography scans were evaluated by one calibrated examiner to measure the total volume of the maxillary sinus, the distance between the medial and the lateral walls at 5, 10, and 15 mm vertically from the sinus floor, the height of septa (if present), and the height of the maxillary sinus cavity from both the alveolar crest and the sinus floor to the meatus. Recorded patient-dependent variables were age, gender, and edentulism status.

RESULTS

Total maxillary sinus volume was significantly smaller in completely and partially edentulous patients than in dentate subjects. This finding was influenced by age, as older patients exhibited less volume, regardless of gender and edentulism status. Age showed an indirect correlation with the distance to the meatus, the sinus volume, and the mediolateral dimensions. Additionally, the prevalence of accessory meatus in this population was 29.19%.

CONCLUSIONS

The dimensions of the maxillary sinus are influenced by age and edentulism status being reduced by aging and tooth loss.

Maxillary sinus volume in patients with impacted canines

OBJECTIVES

To evaluate the maxillary sinus volumes in unilaterally impacted canine patients and to compare the volumetric changes that occur after the eruption of canines to the dental arch using cone beam computed tomography (CBCT).

MATERIALS AND METHODS

Pre- (T0) and posttreatment (T1) CBCT records of 30 patients were used to calculate maxillary sinus volumes between the impacted and erupted canine sides. The InVivoDental 5.0 program was used to measure the volume of the maxillary sinuses. The distance from impacted canine cusp tip to the target point on the palatal plane was also measured.

RESULTS

Right maxillary sinus volume was statistically significantly smaller compared to that of the left maxillary sinus when the canine was impacted on the right side at T0. According to the T1 measurements there was no significant difference between the mean volumes of the impaction side and the contralateral side. The distance from the canine tip to its target point on the palatal plane were 17.17 mm, and the distance from the tip to the target point was 15.14 mm for the left- and right-side impacted canines, respectively, and there was a significant difference between the mean amount of change of both sides of maxillary sinuses after treatment of impacted canines.

CONCLUSIONS

Orthodontic treatment of impacted canines created a significant increase in maxillary sinus volume when the impacted canines were closer with respect to the maxillary sinus.

Translational value of sheep as animal model to study sinus augmentation

Sinus augmentation is a routine surgical procedure in dentistry. At present, various animal models are available for the research purpose on this topic. In particular, for the first time, we have performed a morphological study on sheep sinus, using cone beam computed tomography (CBCT), to precisely define the anatomy of the ovine sinus. Then, we compared the sheep and human sinus morphological parameters, in order to uniform the research approach to the sinus augmentation procedures and to standardize this experimental model. Six fresh heads of adult female sheep were studied with CBCT and histologic examination to determine the dimensions and the organization of the ovine maxillary sinus. The comparison of the dimensional values between man and sheep shows evident differences between the two species; CBCT offers detailed information for studying normal maxillary sinus. Human and sheep maxillary sinus show anatomical differences that must be taken into account in experimental procedures.

Three-dimensional linear and volumetric analysis of maxillary sinus pneumatization

Considering the anatomical variability related to the maxillary sinus, its intimate relation to the maxillary posterior teeth and because of all the implications that pneumatization may possess, three-dimensional assessment of maxillary sinus pneumatization is of most usefulness. The aim of this study is to analyze the maxillary sinus dimensions both linearly and volumetrically using cone beam computed tomography (CBCT) to assess the maxillary sinus pneumatization. Retrospective analysis of 30 maxillary sinuses belonging to 15 patients’ CBCT scans was performed. Linear and volumetric measurements were conducted and statistically analyzed. The maximum craniocaudal extension of the maxillary sinus was located around the 2nd molar in 93% of the sinuses, while the maximum mediolateral and antroposterior extensions of the maxillary sinus were located at the level of root of zygomatic complex in 90% of sinuses. There was a high correlation between the linear measurements of the right and left sides, where the antroposterior extension of the sinus at level of the nasal floor had the largest correlation (0.89). There was also a high correlation between the Simplant and geometric derived maxillary sinus volumes for both right and left sides (0.98 and 0.96, respectively). The relations of the sinus floor can be accurately assessed on the different orthogonal images obtained through 3D CBCT scan. The geometric method offered a much cheaper, easier, and less sophisticated substitute; therefore, with the availability of software, 3D volumetric measurements are more facilitated.

Surgical Management of Oro-Antral Communications Using Resorbable GTR Membrane and FDMB Sandwich Technique: A Clinical Study

The paper describes a new technique for closure of the oro-antral communication, in which both hard (bone) and soft tissue closure was achieved. The technique uses a Guided Tissue Regeeration (GTR) membrane and Freez Dried Mineralized Bone (FDMB) allograft for closure of the defect. Aim of the study was to assess the advantages of the surgical management of oro-antral communications using resorbable GTR membrane and FDMB sandwich technique. A total 10 patients were selected in whom dental extractions were complicated by formation of oro-antral communication (OAC). The resorbable guided tissue regeneration membrane (PERIOCOL-GTR) and freeze dried mineralized bone allograft material was used. Some cancellous granules of freeze dried bone allograft was sandwiched between sheaths of appropriately trimmed collagen membrane which was previously sutured together on three sides using 3/0 resorbable polyglycolic acid suture (vicryl). The fourth side was then adequately closed using the same suture after the bone graft had been inserted, thus creating a closed sandwich. The prepared sandwich was then tucked into the OAC in such a way that it formed a convexity towards the sinus and a concavity towards the alveolar bone. The rough surface of the sandwich is faced to the alveolar bone and additional bone graft is filled into this concavity. Suturing done without tension. Post-operative orthopantomogram was taken to radiologically quantify the amount of bone grafting/augmentation and closure of oro-antral fistula. There was an average of 11.84 mm bone formation after 6 months, the average width preserved and obtained was 6.9 mm. By the end of 4 months there was evidence of bone formation in 7 subjects and in three subjects bony trabeculae formed was almost similar to the adjacent bone. By the end of 6 months follow-up of 7 subjects showed trabeculae indistinguishable from the adjacent bone. The study was done in 10 patients with a follow-up period of 6 months and found to be excellent in the formation of new bone. The technique is simple and excellent for closure of the oro-antral communications especially when subsequent placement of end osseous implant is considered without the need of donor site surgery for bone grafting.