Periodontal tissue reaction to customized nano-hydroxyapatite block scaffold in one-wall intrabony defect: a histologic study in dogs

Synthetic materials in craniofacial regenerative medicine: A comprehensive overview

The state-of-the-art approach to regenerating different tissues and organs is tissue engineering which includes the three parts of stem cells (SCs), scaffolds, and growth factors. Cellular behaviors such as propagation, differentiation, and assembling the extracellular matrix (ECM) are influenced by the cell's microenvironment. Imitating the cell's natural environment, such as scaffolds, is vital to create appropriate tissue. Craniofacial tissue engineering refers to regenerating tissues found in the brain and the face parts such as bone, muscle, and artery. More biocompatible and biodegradable scaffolds are more commensurate with tissue remodeling and more appropriate for cell culture, signaling, and adhesion. Synthetic materials play significant roles and have become more prevalent in medical applications. They have also been used in different forms for producing a microenvironment as ECM for cells. Synthetic scaffolds may be comprised of polymers, bioceramics, or hybrids of natural/synthetic materials. Synthetic scaffolds have produced ECM-like materials that can properly mimic and regulate the tissue microenvironment's physical, mechanical, chemical, and biological properties, manage adherence of biomolecules and adjust the material's degradability. The present review article is focused on synthetic materials used in craniofacial tissue engineering in recent decades.

Cross-linked hyaluronic acid gel with or without a collagen matrix in the treatment of class III furcation defects: A histologic and histomorphometric study in dogs

AIM

To histologically evaluate the effects of cross-linked hyaluronic acid (xHyA) with or without a collagen matrix (CM) on periodontal wound healing/regeneration in class III furcation defects in dogs.

MATERIALS AND METHODS

Class III furcation defects were surgically created in the mandibular premolars in six beagle dogs. The defects were randomly treated as follows: open flap debridement (OFD) + CM (CM), OFD + xHyA (xHyA), OFD + xHyA + CM (xHyA/CM) and OFD alone (OFD). At 10 weeks, the animals were euthanized for histological evaluation.

RESULTS

The newly formed bone areas in the xHyA (4.04 ± 1.51 mm² ) and xHyA/CM (4.32 ± 1.14 mm² ) groups were larger than those in the OFD (3.25 ± 0.81 mm² ) and CM (3.31 ± 2.26 mm² ) groups. The xHyA (6.25 ± 1.45 mm) and xHyA/CM (6.40 ± 1.35 mm) groups yielded statistically significantly (p < .05) greater formation of new connective tissue attachment (i.e., new cementum, with inserting connective tissue fibres) compared with the OFD (1.47 ± 0.85 mm) group. No significant differences were observed in any of the histomorphometric parameters between the xHyA and xHyA/CM groups. Complete furcation closure was not observed in any of the four treatment modalities.

CONCLUSIONS

Within their limits, the present results suggest that the use of xHyA with or without CM positively influences periodontal wound healing in surgically created, acute-type class III furcation defects.

Healing Assessment of Osseous Defects after Surgical Removal of Periapical Lesions in the Presence of Hydroxyapatite, Nanohydroxyapatite, and a Combination of Nanohydroxyapatite and Platelet-rich Fibrin: A Clinical Study

Abstract: Aim: to evaluate the bone healing in failed endodontically treated teeth after surgical removal of periapical lesions and placement of hydroxyapatite (HA), nanohydroxyapatite (nHA) and a combination of nanohydroxyapatite with platelet rich fibrin (PRF) periapically. Subjects and methods: the study was conducted on twenty-four patients having periapical radiolucency in single rooted teeth. The selected teeth were divided into three groups: Group A, Group B, and Group C; of 8 teeth each. All the teeth were retreated in two visits. In the first visit the old filling was removed using Protaper retreatment files (Dentsply Sirona®) then irrigation with sodium hypochlorite 2.5% was done. All canals were dried and filled with Di-antibiotic paste (metronidazole and ciprofloxacin). In the second visit the canals were obturated with Pro Taper gutta-percha points and root canal sealer (Adseal resin sealer) followed by surgical intervention in the same day. A periapical curettage along with apicoectomy were established. In all the groups, root end cavity was prepared and filled with MTA (ProRoot MTA; DENTSPLY Tulsa Dental Specialties). In Group A, hydroxyapatite powder was packed in the curetted periapical defect. In Group B, nanohydroxyapatite powder was packed in the curetted periapical defect. In Group C, nanohydroxyapatite with PRF were mixed and packed in the curetted periapical defect. In all groups, patients recall visits were scheduled at 1, 3, and 6 months’ time intervals for clinical and radiological evaluation. Results: after one month; there was a statistically significant difference between the median percentage changes in lesions size in the three groups. Pair-wise comparisons between groups revealed that there was no statistically significant difference between group B (nHA) and group C (PRF and nHA) groups. Both showed statistically significantly higher median percentage reduction in lesions size than group A (HA group). After three as well as six months; there was no statistically significant difference between the median percentage decreases in lesions size in the three groups. Conclusion: It was concluded that nHA combination with PRF produced faster periapical healing (bone regeneration) in the first three months than nHA alone. However, HA produce periapical healing (bone regeneration) after six months.

In vitro comparison of nanofibrillar and macroporous-spongious composite tissue scaffolds for periodontal tissue engineering

PURPOSE/AIM OF THE STUDY

The ultimate goal of periodontal treatment is to regenerate the lost periodontal tissues. The interest in nanomaterials in dentistry is growing rapidly and has focused on improvements in various biomedical applications, such as periodontal regeneration and periodontal tissue engineering. To enhance periodontal tissue regeneration, hydroxyapatite (HA) was used in conjunction with other scaffold materials, such as Poly lactic-co-glycolic-acid (PLGA) and collagen (C). The main target of this study was to compare the effects of nano and macrostructures of the tissue scaffolds on cell behavior in vitro for periodontal tissue engineering.

MATERIALS AND METHODS

Nanofibrillar and macroporous-spongious composite tissue scaffolds were produced using PLGA/C/HA. Subgroups with BMP-2 signal molecule and without HA were also created. The scaffolds were characterized by FTIR, SEM/EDX techniques, and mechanical tests. The scaffolds were compared in the periodontal ligament (PDL) and MCT3-E1 cell cultures. The cell behaviors; adhesions by SEM, proliferation by WST-1, differentiation by ALP and mineralization with Alizarin Red Tests were determined.

RESULTS

Cell adhesion and mineralization were higher in the nanofibrillar scaffolds compared to the macroporous-spongious scaffolds. Macroporous-spongious scaffolds seemed better for the proliferation of PDL cells and differentiation of MC3T3-E1-preosteoblastic cells, while nanofibrillar scaffolds were more convenient for the differentiation of PDL cells and proliferation of MC3T3-E1-preosteoblastic cells.

CONCLUSIONS

In general, nanofibrillar scaffolds showed more favorable results in cell behaviors, compared to the macroporous-spongious scaffolds, and mostly, BMP-2 and HA promoted the activities of the cells.

Effectiveness of a Nanohydroxyapatite-Based Hydrogel on Alveolar Bone Regeneration in Post-Extraction Sockets of Dogs with Naturally Occurring Periodontitis

Pathological mandibular fracture after dental extraction usually occurs in dogs with moderate to severe periodontitis. A nanohydroxyapatite-based hydrogel (HAP hydrogel) was developed to diminish the limitations of hydroxyapatite for post-extraction socket preservation (PSP). However, the effect of the HAP hydrogel in dogs has still not been widely investigated. Moreover, there are few studies on PSP in dogs suffering from clinical periodontitis. The purpose of this study was to evaluate the effectiveness of the HAP hydrogel for PSP in dogs with periodontitis. In five dogs with periodontitis, the first molar (309 and 409) of each hemimandible was extracted. Consequently, all the ten sockets were filled with HAP-hydrogel. Intraoral radiography was performed on the day of operation and 2, 4, 8 and 12 weeks post operation. The Kruskal-Wallis test and paired t-test were adopted for alveolar bone regeneration analysis. The results demonstrated that the radiographic grading, bone height measurement, and bone regeneration analysis were positively significant at all follow-up times compared to the day of operation. Moreover, the scanning electron microscopy with energy-dispersive X-ray spectroscopy imaging after immersion showed a homogeneous distribution of apatite formation on the hydrogel surface. Our investigation suggested that the HAP hydrogel effectively enhances socket regeneration in dogs with periodontitis and can be applied as a bone substitute for PSP in veterinary dentistry.

A Review of Tissue Engineering for Periodontal Tissue Regeneration

Periodontal disease is one of the most common diagnoses in small animal veterinary medicine. This infectious disease of the periodontium is characterized by the inflammation and destruction of the supporting structures of teeth, including periodontal ligament, cementum, and alveolar bone. Traditional periodontal repair techniques make use of open flap debridement, application of graft materials, and membranes to prevent epithelial downgrowth and formation of a long junctional epithelium, which inhibits regeneration and true healing. These techniques have variable efficacy and are made more challenging in veterinary patients due to the cost of treatment for clients, need for anesthesia for surgery and reevaluation, and difficulty in performing necessary diligent home care to maintain oral health. Tissue engineering focuses on methods to regenerate the periodontal apparatus and not simply to repair the tissue, with the possibility of restoring normal physiological functions and health to a previously diseased site. This paper examines tissue engineering applications in periodontal disease by discussing experimental studies that focus on dogs and other animal species where it could potentially be applied in veterinary medicine. The main areas of focus of tissue engineering are discussed, including scaffolds, signaling molecules, stem cells, and gene therapy. To date, although outcomes can still be unpredictable, tissue engineering has been proven to successfully regenerate lost periodontal tissues and this new possibility for treating veterinary patients is discussed.

Biological effect of the nanocrystalline calcium sulfate bone graft in the periodontal regeneration

BACKGROUND

The ultimate goal of tissue engineering is to reproduce functional alveolar∖Periodontal complex. This study aimed to asses micro- and nano-formulated crystalline calcium sulfate as possible treatment of intrabony defect utilizing an autologous Platelet rich fibrin scaffold.

SUBJECTS

and Methods: An experimental prospective split mouth design using eight healthy mongrel dog's was conducted. After two months of extracting the first premolar, bilateral intrabony defects were created mesial to the mandibular second premolar. One side was grafted by nanocrystalline calcium sulfate, while, the opposite side was grafted with microcrystalline calcium sulfate graft. Dogs were randomly euthanized after one month (group I) and 3 months (group II). The primary outcomes were the histological changes of new bone formation in hematoxylin and eosin and Masson trichrome stains, while histomorphometric and radiographic analysis were the secondary outcome followed by statistical analysis (P value was set at .05).

RESULTS

There was a significant increase in the percentage of bone formation in relation to defect height in nanocrystalline compared to microcrystalline form after one month and three months in both histological (p-values of <0.0001) and radiographic results (p-values of <0.0001).

CONCLUSION

Nanocrystalline calcium sulfate presented a significant enhanced periodontal regeneration compared to the microcrystalline form.

Fabrication of Three-Dimensional Composite Scaffold for Simultaneous Alveolar Bone Regeneration in Dental Implant Installation

Dental implant surgeries involve the insertion of implant fixtures into alveolar bones to replace missing teeth. When the availability of alveolar bone at the surgical site is insufficient, bone graft particles are filled in the insertion site for successful bone reconstruction. Bone graft particles induce bone regeneration over several months at the insertion site. Subsequently, implant fixtures can be inserted at the recipient site. Thus, conventional dental implant surgery is performed in several steps, which in turn increases the treatment period and cost involved. Therefore, to reduce surgical time and minimize treatment costs, a novel hybrid scaffold filled with bone graft particles that could be combined with implant fixtures is proposed. This scaffold is composed of a three-dimensionally (3D) printed polycaprolactone (PCL) frame and osteoconductive ceramic materials such as hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP). Herein, we analyzed the porosity, internal microstructure, and hydrophilicity of the hybrid scaffold. Additionally, Saos-2 cells were used to assess cell viability and proliferation. Two types of control scaffolds were used (a 3D printed PCL frame and a hybrid scaffold without HA/β-TCP particles) for comparison, and the fabricated hybrid scaffold was verified to retain osteoconductive ceramic particles without losses. Moreover, the fabricated hybrid scaffold had high porosity and excellent microstructural interconnectivity. The in vitro Saos-2 cell experiments revealed superior cell proliferation and alkaline phosphatase assay results for the hybrid scaffold than the control scaffold. Hence, the proposed hybrid scaffold is a promising candidate for minimizing cost and duration of dental implant surgery.

Recent advances in periodontal regeneration: A biomaterial perspective

Periodontal disease (PD) is one of the most common inflammatory oral diseases, affecting approximately 47% of adults aged 30 years or older in the United States. If not treated properly, PD leads to degradation of periodontal tissues, causing tooth movement, and eventually tooth loss. Conventional clinical therapy for PD aims at eliminating infectious sources, and reducing inflammation to arrest disease progression, which cannot achieve the regeneration of lost periodontal tissues. Over the past two decades, various regenerative periodontal therapies, such as guided tissue regeneration (GTR), enamel matrix derivative, bone grafts, growth factor delivery, and the combination of cells and growth factors with matrix-based scaffolds have been developed to target the restoration of lost tooth-supporting tissues, including periodontal ligament, alveolar bone, and cementum. This review discusses recent progresses of periodontal regeneration using tissue-engineering and regenerative medicine approaches. Specifically, we focus on the advances of biomaterials and controlled drug delivery for periodontal regeneration in recent years. Special attention is given to the development of advanced bio-inspired scaffolding biomaterials and temporospatial control of multi-drug delivery for the regeneration of cementum-periodontal ligament-alveolar bone complex. Challenges and future perspectives are presented to provide inspiration for the design and development of innovative biomaterials and delivery system for new regenerative periodontal therapy.

Nanomaterials in dentistry: a cornerstone or a black box?

Aim: The studies on tooth structure provided basis for nanotechnology-based dental treatment approaches known as nanodentistry which aims at detection and treatment of oral pathologies, such as dental caries and periodontal diseases, insufficiently being treated by conventional materials or drugs. This review aims at defining the role of nanodentistry in the medical area, its potential and hazards. Materials & methods: To validate these issues, current literature on nanomaterials for dental applications was critically reviewed. Results: Nanomaterials for teeth restoration, bone regeneration and oral implantology exhibit better mechanical properties and provide more efficient esthetic outcome. However, still little is known about influence of long-term function of such biomaterials in the living organism. Conclusion: As application of nanomaterials in industry and medical-related sciences is still expanding, more information is needed on how such nano-dental materials may interfere with oral cavity, GI tract and general health.

Composite scaffolds loaded with bone mesenchymal stem cells promote the repair of radial bone defects in rabbit model

This study aimed to investigate the efficacy of three-dimensional scaffolds of silk fibroin/chitosan/nano-hydroxyapatite (SF/CS/nHA) and bone marrow derived mesenchymal stem cells (BMSCs) on the repair of long segmental bone defects in rabbits. BMSCs were cultured with SF/CS/nHA in vitro, and cell proliferation, alkaline phosphatase activity and Ca2+ content were examined. A 15mm segmental defect in the radius was generated in 12 New Zealand White rabbits, which were divided randomly into three groups (n=4): experimental group with SF/CS/nHA scaffold of induced BMSCs; control group with SF/CS/nHA scaffold; and blank group without any materials. Postoperatively at 12 weeks, osteogenesis effect and the degradation and absorption of SF/CS/nHA were evaluated by X-ray, hematoxylin eosin staining, and scanning electron microscopy. In vitro, SF/CS/nHA scaffolds exhibited good biocompatibility and no toxicity. SF/CS/nHA promoted adhesion, growth, and calcium nodule formation of BMSCs compared to control (P<0.05). In vivo, we observed gradual new bone formation and bone defect gradually recovered at 12 weeks in experimental and control group, but more new bone was formed in experimental group (P<0.05). In blank group, limited bone formation was observed and bone defect was obvious. In conclusion, SF/CS/nHA scaffolds loaded with BMSCs achieve high efficacy to repair segmental defect in the radius.

Application of silk fibroin/chitosan/nano-hydroxyapatite composite scaffold in the repair of rabbit radial bone defect

Silk fibroin (SF), chitosan (CS) and nano-hydroxyapatite (nHA) possess excellent biocompatibility, thus, these were used to construct a SF/CS/nHA composite scaffold. Previously published results identified that this material exhibited satisfactory physical and chemical properties, and therefore qualified as a repair material in bone tissue engineering. The aim of the present study was to investigate the capacity and mechanism of this composite scaffold in repairing bone defects. In total, 45 New Zealand white rabbits were used to model defect in the right radial bone. A radial bone defect was induced, and rabbits were divided into the following treatment groups (n=15 in each): Group A, in which the SF/CS/nHA scaffold was implanted; group B, in which the SF/CS scaffold was implanted; and group C, in which rabbits did not receive subsequent treatment. X-ray scanning, specimen observation and histopathological examination were implemented at 1, 2, 3 and 4 months after modeling, in order to evaluate the osteogenic capacity and mechanism. At 1 month after modeling, the bone density shadow in the X-ray scan was darker in group A as compared with that in group B. Observation of the pathological specimens indicated that normal bone tissues partially replaced the scaffold. At 2 months, the bone density shadow of group A was similar to normal bone tissues, and normal tissue began to replace the scaffold. At 3-4 months after modeling, the X-ray scan and histopathological observation indicated that the normal bone tissues completely replaced the scaffold in group A, with an unobstructed marrow cavity. However, the bone mass of group B was lower in comparison with that of group A. The bone defect induced in group C was filled with fibrous connective tissues. Therefore, it was concluded that the SF/CS/nHA composite scaffold may be a promising material for bone tissue engineering.

Comparison of Different Periodontal Healing of Critical Size Noncontained and Contained Intrabony Defects in Beagles

BACKGROUND

Regenerative techniques help promote the formation of new attachment and bone filling in periodontal defects. However, the dimensions of intraosseous defects are a key determinant of periodontal regeneration outcomes. In this study, we evaluated the efficacy of use of anorganic bovine bone (ABB) graft in combination with collagen membrane (CM), to facilitate healing of noncontained (1-wall) and contained (3-wall) critical size periodontal defects.

METHODS

The study began on March 2013, and was completed on May 2014. One-wall (7 mm × 4 mm) and 3-wall (5 mm × 4 mm) intrabony periodontal defects were surgically created bilaterally in the mandibular third premolars and first molars in eight beagles. The defects were treated with ABB in combination with CM (ABB + CM group) or open flap debridement (OFD group). The animals were euthanized at 8-week postsurgery for histological analysis. Two independent Student's t-tests (1-wall [ABB + CM] vs. 1-wall [OFD] and 3-wall [ABB + CM] vs. 3-wall [OFD]) were used to assess between-group differences.

RESULTS

The mean new bone height in both 1- and 3-wall intrabony defects in the ABB + CM group was significantly greater than that in the OFD group (1-wall: 4.99 ± 0.70 mm vs. 3.01 ± 0.37 mm, P < 0.05; 3-wall: 3.11 ± 0.59 mm vs. 2.08 ± 0.24 mm, P < 0.05). The mean new cementum in 1-wall intrabony defects in the ABB + CM group was significantly greater than that in their counterparts in the OFD group (5.08 ± 0.68 mm vs. 1.16 ± 0.38 mm; P < 0.05). Likewise, only the 1-wall intrabony defect model showed a significant difference with respect to junctional epithelium between ABB + CM and OFD groups (0.67 ± 0.23 mm vs. 1.12 ± 0.28 mm, P < 0.05).

CONCLUSIONS

One-wall intrabony defects treated with ABB and CM did not show less periodontal regeneration than that in 3-wall intrabony defect. The noncontained 1-wall intrabony defect might be a more discriminative defect model for further research into periodontal regeneration.

Periodontal Wound Healing by Transplantation of Jaw Bone Marrow-Derived Mesenchymal Stem Cells in Chitosan/Anorganic Bovine Bone Carrier Into One-Wall Infrabony Defects in Beagles

BACKGROUND

This study aims to evaluate the performance of chitosan/anorganic bovine bone (C/ABB) scaffold seeded with human jaw bone marrow-derived mesenchymal stem cells (hJBMMSCs) in supporting the healing/repair of 1-wall critical-size periodontal defects.

METHODS

Physical properties of the C/ABB scaffold were compared with those of the chitosan scaffold. hJBMMSCs were obtained from healthy human alveolar bone during the extraction of third molar impacted teeth. One-wall (7 × 4 mm) infrabony defects were surgically created at the bilateral mandibular third premolars and first molars in six beagles. The defects were randomly assigned to six groups and implanted with different scaffolds: 1) chitosan (C) scaffold; 2) C scaffold with hJBMMSCs (C + cell); 3) C/ABB scaffold (C/ABB); 4) C/ABB scaffold with hJBMMSCs (C/ABB + cell); 5) ABB scaffold (ABB); and 6) open flap debridement (control). The animals were euthanized 8 weeks after surgery for histologic analysis.

RESULTS

The C/ABB scaffold had a porous structure and increased compressive strength. Both C/ABB and C/ABB + cell exhibited the newly formed cellular mixed-fiber cementum, woven/lamellar bone, and periodontal ligament. Cementum formation was significantly greater in group C/ABB + cell than in group C/ABB (2.64 ± 0.50 mm versus 0.91 ± 0.55 mm, P <0.05). For new bone (NB) height, group C/ABB + cell and C/ABB showed mean ± SD values of 2.83 ± 0.29 mm and 2.65 ± 0.52 mm and for NB area 8.89 ± 1.65 mm and 8.73 ± 1.94 mm(2), respectively. For NB (height and area), there was no significant difference between the two groups.

CONCLUSIONS

The combination of hJBMMSCs and C/ABB scaffolds could promote periodontal repair. Future studies are expected to further optimize the combination and lead to an ideal periodontal regeneration.

Comparative evaluation of the efficacy of synthetic nanocrystalline hydroxyapatite bone graft (Ostim®) and synthetic microcrystalline hydroxyapatite bone graft (Osteogen®) in the treatment of human periodontal intrabony defects: A clinical and denta scan study

Background:

To evaluate the relative efficacy of synthetic nanocrystalline hydroxyapatite (HA) (Ostim^®) and microcrystalline HA (Osteogen^®) bone grafts in the treatment of human periodontal intrabony defects clinically and radiographically through denta scan.

Materials and Methods:

Ten chronic periodontitis patients with bilateral intrabony periodontal defects of ≥2 mm radiographic defect depth below 55 years of age were selected randomly and treated with synthetic nanocrystalline HA (Ostim^®) or synthetic microcrystalline HA (Osteogen^®) bone graft. Clinical parameters including probing depth (PD) and clinical attachment level (CAL) were measured preoperatively and postoperatively at 3 and 6 months for each of the defects using an occlusal acrylic stent. Radiographic parameters were measured with the help of denta scan preoperatively and postoperatively at 6 months.

Results:

At 6 months following therapy, the Osteogen^® group showed a reduction in mean PD from 11.10 ± 1.663 to 8.50 ± 0.850 mm and a change in mean CAL from 6.30 ± 1.160 to 3.40 ± 0.516 mm, whereas in the Ostim^® group, the mean PD decreased from 11.20 ± 0.919 to 8.30 ± 0.823 mm and mean CAL decreased from 6.10 ± 0.738 to 3.30 ± 0.483 mm. At 6 months following therapy, denta scan showed a reduction in mean intrabony defect depth in the Osteogen^® group from 2.54 ± 0.786 to 1.01 ± 0.448 mm, whereas in the Ostim^® group, it was 2.71 ± 0.650 mm to 1.12 ± 0.563 mm.

Conclusion:

It was concluded that both the HA bone grafts produced statistically significant reduction in pocket depth, in the depth of osseous lesion, and a statistically significant gain in attachment level, irrespective of their physico-chemical properties.

Test in canine extraction site preservations by using mineralized collagen plug with or without membrane

The aim of this study was to discuss the feasibility of porous mineralized collagen plug and bilayer mineralized collagen-guided bone regeneration membrane in site preservation in extraction sockets. The third mandibular premolars on both sides were extracted from four dogs, thus there were 16 alveolar sockets in all dogs and were randomly assigned into three groups. Group A had six alveolar sockets, and groups B and C had five alveolar sockets, respectively. Each alveolar socket of group A was immediately implanted with a porous mineralized collagen plug and covered with a bilayer mineralized collagen-guided bone regeneration membrane after tooth extraction. Alveolar sockets of group B were implanted with porous mineralized collagen plug only, and group C was set as blank control without any implantation. The healing effects of the extraction sockets were evaluated by gross observation, morphological measurements, and X-ray micro-computed tomography after twelve weeks. Twelve weeks after operation, both groups A and B had more amount of new bone formation compared with group C; in terms of the degree of alveolar bone height, group A was lower than groups B and C with significant differences; the bone mineral density in the region of interest and bone remodeling degree in group A were higher than those of groups B and C. As a result, porous mineralized collagen plug could induce the regeneration of new bone in extraction socket, and combined use of porous mineralized collagen plug and bilayer mineralized collagen guided bone regeneration membrane could further reduce the absorption of alveolar ridge and preserve the socket site.

Management of a One-wall Intrabony Osseous Defect with Combination of Platelet Rich Plasma and Demineralized Bone Matrix- a Two-year Follow up Case Report

Periodontal regeneration in a one-wall intrabony defect is a challenging and complex phenomenon. The combination therapy of commercially available bone grafts with the innovative tissue engineering strategy, the platelet rich plasma, has emerged as a promising grafting modality for two and three walled intrabony osseous defects. The application of this combination approach was attempted in a most challenging one-wall intrabony defect. Open flap debridement and placement of combination of autologous platelet rich plasma(PRP) and demineralized bone matrix was done in one-wall intrabony defect in relation to tooth #21 in a 30 year old female patient. The 6-month follow- up results showed significant improvement in clinical parameters. Radiographic evidence of bone formation was observed as early as 3 months with almost complete fill by 6 months post-operatively. The results were maintained over a period of 2 years.

Silicate-based bioceramics for periodontal regeneration

Periodontal disease is characterized by the destruction of the tissues that attach the tooth to the alveolar bone. Various methods for regenerative periodontal therapy including the use of barrier membranes, bone replacement grafts, and growth factor delivery have been investigated; however, true regeneration of periodontal tissue is still a significant challenge to scientists and clinicians. The focus on periodontal tissue engineering has shifted from attempting to recreate tissue replacements/constructs to the development of biomaterials that incorporate and release regulatory signals to achieve in situ periodontal regeneration. The release of ions and molecular cues from biomaterials may help to unlock latent regenerative potential in the body by regulating cell proliferation and differentiation towards different lineages (e.g. osteoblasts and cementoblasts). Silicate-based bioactive materials, including bioactive silicate glasses and ceramics, have become the materials of choice for periodontal regeneration, due to their favourable osteoconductivity and bioactivity. This article will focus on the most recent advances in the in vitro and in vivo biological application of silicate-based ceramics, specifically as it relates to periodontal tissue engineering.

Biomaterials for periodontal regeneration: a review of ceramics and polymers

Periodontal disease is characterized by the destruction of periodontal tissues. Various methods of regenerative periodontal therapy, including the use of barrier membranes, bone replacement grafts, growth factors and the combination of these procedures have been investigated. The development of biomaterials for tissue engineering has considerably improved the available treatment options above. They fall into two broad classes: ceramics and polymers. The available ceramic-based materials include calcium phosphate (eg, tricalcium phosphate and hydroxyapatite), calcium sulfate and bioactive glass. The bioactive glass bonds to the bone with the formation of a layer of carbonated hydroxyapatite in situ. The natural polymers include modified polysaccharides (eg, chitosan,) and polypeptides (collagen and gelatin). Synthetic polymers [eg, poly(glycolic acid), poly(L-lactic acid)] provide a platform for exhibiting the biomechanical properties of scaffolds in tissue engineering. The materials usually work as osteogenic, osteoconductive and osteoinductive scaffolds. Polymers are more widely used as a barrier material in guided tissue regeneration (GTR). They are shown to exclude epithelial downgrowth and allow periodontal ligament and alveolar bone cells to repopulate the defect. An attempt to overcome the problems related to a collapse of the barrier membrane in GTR or epithelial downgrowth is the use of a combination of barrier membranes and grafting materials. This article reviews various biomaterials including scaffolds and membranes used for periodontal treatment and their impacts on the experimental or clinical management of periodontal defect.

An exploratory study on the efficacy of rat dedifferentiated fat cells (rDFATs) with a poly lactic-co-glycolic acid/hydroxylapatite (PLGA/HA) composite for bone formation in a rat calvarial defect model

In the last two decades, tissue-engineering approaches using scaffolds, growth factors, and cells, or their combination, have been developed for the regeneration of periodontal tissue and bone. The aim of this study was to examine the effects of rat dedifferentiated fat cells (rDFATs) with a poly lactic-co-glycolic acid/hydroxylapatite (PLGA/HA) composite on bone formation in rat calvarial defects. Twenty animals surgically received two calvarial defects (diameter, 5 mm) bilaterally in each parietal bone. The defects were treated by one of the following procedures: PLGA/HA+osteo-differentiated rDFATs implantation (PLGA/HA+rDFATs (OD)); PLGA/HA+rDFATs implantation (PLGA/HA+rDFATs); PLGA/HA implantation (PLGA/HA); no implantation as a control. The animals were euthanized at 8 weeks after the surgery for histological evaluation. The PLGA/HA composite was remarkably resorbed and the amounts of residual PLGA/HA were very slight at 8 weeks after the surgery. The PLGA/HA-implanted groups (PLGA/HA+rDFATs (OD), PLGA/HA+rDFATs and PLGA/HA) showed recovery of the original volume and contour of the defects. The newly formed bone area was significantly larger in the PLGA/HA group (42.10 ± 9.16 %) compared with the PLGA/HA+rDFATs (21.35 ± 13.49 %) and control (22.17 ± 13.08 %) groups (P < 0.05). The percentage of defect closure (DC) by new bone in the PLGA/HA+rDFATs (OD) group (83.16 ± 13.87 %) was significantly greater than that in the control group (40.61 ± 29.62 %) (P < 0.05). Furthermore, the PLGA/HA+rDFATs (OD) group showed the highest level of DC among all the groups. The present results suggest that the PLGA/HA composite is a promising scaffold and that PLGA/HA+DFATs (OD) may be effective for bone formation.

Periodontal tissue engineering strategies based on nonoral stem cells

Periodontal disease is an inflammatory disease which constitutes an important health problem in humans due to its enormous prevalence and life threatening implications on systemic health. Routine standard periodontal treatments include gingival flaps, root planning, application of growth/differentiation factors or filler materials and guided tissue regeneration. However, these treatments have come short on achieving regeneration ad integrum of the periodontium, mainly due to the presence of tissues from different embryonic origins and their complex interactions along the regenerative process. Tissue engineering (TE) aims to regenerate damaged tissue by providing the repair site with a suitable scaffold seeded with sufficient undifferentiated cells and, thus, constitutes a valuable alternative to current therapies for the treatment of periodontal defects. Stem cells from oral and dental origin are known to have potential to regenerate these tissues. Nevertheless, harvesting cells from these sites implies a significant local tissue morbidity and low cell yield, as compared to other anatomical sources of adult multipotent stem cells. This manuscript reviews studies describing the use of non-oral stem cells in tissue engineering strategies, highlighting the importance and potential of these alternative stem cells sources in the development of advanced therapies for periodontal regeneration.