Lateral approach for recurrent unilateral cervical radiculopathy after anterior discectomy with fusion. Report of two cases

Biomechanical analysis of the door-shaped titanium plate in single-level anterior cervical discectomy and fusion

BACKGROUND

Analyse and discuss the immediate stability of the cervical spine after anterior cervical discectomy and fusion using a door-shaped titanium plate and compare it with the traditional titanium plate, to provide biomechanical evidence for the rationality and effectiveness of the door-shaped titanium plate in clinical applications.

METHODS

Ten adult goat C4/5 vertebral bodies were obtained, and models were prepared using denture base resin. Biomechanical experiments were performed on the specimens before internal fixation. MTS was used to conduct non-destructive biomechanical loading tests in six directions, including flexion, extension, left-right bending, and left-right torsion, recording the range of motion (ROM) and neutral zone (NZ) of each specimen. The specimens were then randomly divided into two groups: the study group was fixed with a door-shaped titanium plate, and the control group was fixed with a traditional titanium plate. ROM and NZ in each direction were measured again. After measurements, both groups were subjected to 0.5 Hz torsion loading with a torque of 2 N m for a total of 3000 cycles, followed by measuring ROM and NZ in six directions once more.

RESULTS

Compared to before fixation, ROM and NZ in both groups significantly decreased in all six directions after fixation, with statistical significance (P < 0.05); after fixation, the study group showed slightly lower values for various mechanical reference parameters compared to the control group, with no statistical significance (P > 0.05); after 3000 torsional loads, both internal fixation groups showed increased ROM and NZ compared to after fixation but to a lower extent, and no screw or titanium plate loosening was observed. Compared to before fixation, the differences were still statistically significant (P < 0.05), with the study group having slightly lower ROM and NZ values in all directions compared to the control group, with no statistical significance (P > 0.05).

CONCLUSION

The door-shaped titanium plate exhibits mechanical properties similar to the traditional titanium plate in all directions, and its smaller size and simpler surgical operation can be used for anterior cervical endoscopic surgery, reducing surgical trauma. It is clinically feasible and deserves further research and promotion.

Structure Design and Optimization of the C5-C6 Cervical Intervertebral Fusion Cage Using the Anterior Cervical Plate and Cage Fixation System

Background

The fifth and sixth cervical vertebra (C5–C6) is the most easily injured segment encountered in clinical practice. The anterior cervical plate and cage (ACPC) fixation system is always used to reconstruct the intervertebral height and maintain the segmental stability. The postoperative effect, such as subsidence, neck pain, and non-fusion, is greatly affected by the cervical cage structure design. This study determined reasonable structure size parameters that present optimized biomechanical properties related to the postoperative subsidence often accompanied with ACPC.

Material/Methods

Twenty bionic cages with different structural sizes (distance between the center of the cage and groove, groove depth, and groove width) were designed and analyzed based on the regression optimization design and analysis method combined with FE analysis. Because a previous study showed that greater stresses on the endplate are associated with higher risk of subsidence, the optimization object was selected as the stresses on endplate to lower it.

Results

The postoperative stresses on the endplate of all cages with bionic structure design were proved to be lower than with the original one. The optimal structure size was the distance between the center of the cage and groove=0 mm, groove depth=3 mm, and groove width=4 mm. Regression analysis found the cage with optimized bionic structural parameters resulted in a 22.58% reduction of endplate stress response compared with the original one.

Conclusions

The bionic cage with optimized structural sizes can reduce the subsidence risk, suggesting that the optimization method has great potential applications in the biomechanical engineering field.

Biomechanical Comparison of Optimal Shapes for the Cervical Intervertebral Fusion Cage for C5-C6 Cervical Fusion Using the Anterior Cervical Plate and Cage (ACPC) Fixation System: A Finite Element Analysis

BACKGROUND The fifth and sixth cervical vertebrae (C5-C6) represent the high-risk segment requiring surgical correction in cervical spondylosis. Anterior cervical discectomy and fusion (ACDF) of C5-C6 includes an intervertebral fusion cage to maintain foraminal height and is combined with anterior plate fixation. The shape of the intervertebral cage can affect the postoperative outcome, including the rates of fusion, subsidence, and neck pain. This study aimed to use finite element (FE) parametric analysis to compare biomechanical properties of changes in intervertebral cage shape for C5-C6 cervical fusion using the anterior cervical plate and cage (ACPC) fixation system. MATERIAL AND METHODS Five shapes were designed for cervical intervertebral cages, square, oval, kidney-shaped, clover-shaped, and 12-leaf-shaped. The performance was evaluated following implantation into the validated normal C5-C6 FE model using simulation with five physiological conditions. The indicators included the maximum von Mises stress of the endplates, the fusion cages, and the cervical vertebrae. The postoperative subsidence-resistance properties were determined, including the interior stress responses of the intervertebral cages and the surrounding tissues. The fusion-promoting properties were evaluated by the interior stress responses of the bone grafts. RESULTS The optimal shape of the cervical intervertebral cage was the 12-leaf-shape for postoperative subsidence resistance. The kidney shape for the cervical intervertebral cage was optimal for postoperative fusion. CONCLUSIONS FE analysis identified the optimal cervical intervertebral cage design for ACPC fixation of C5-C6. This method may be useful for future developments in the design of spinal implants.

Posterior percutaneous endoscopic cervical foraminotomy and discectomy for degenerative cervical radiculopathy using intraoperative O-arm imaging

Introduction

Posterior percutaneous endoscopic cervical foraminotomy and discectomy (P-PECD) is a minimally invasive technique for the treatment of degenerative cervical radiculopathy. The O-arm, an intraoperative mobile computed tomography (CT) scanner, may improve spine surgery outcomes.

Aim

To evaluate clinical outcomes of O-arm assisted P-PECD in patients with degenerative cervical radiculopathy.

Material and methods

Between January 2013 and January 2018, 32 patients with degenerative cervical radiculopathy who underwent P-PECD were followed up for 12 months. Their demographic, clinical and surgical data were reviewed retrospectively. All patients received intraoperative O-arm scanning to assess working cannula placement and decompression. The visual analogue scale (VAS), the neck disability index (NDI), and Odom’s criteria were used to evaluate clinical outcomes.

Results

Compared with preoperative values, mean NDI, neck-VAS, and arm-VAS scores were dramatically improved 1 week postoperatively, and the improvement was maintained for at least a year after surgery (from 27.6 ±10.5, 5.8 ±1.7, and 7.2 ±2.3 to 1.4 ±0.8, 1.1 ±0.8 and 0.9 ±0.6, respectively). According to Odom’s criteria, 27/32 patients (84.4%) reported excellent or good results. There were no permanent complications. One patient suffered from transient thumb weakness due to a cervical nerve root injury caused by the spinal needle.

Conclusions

P-PECD aided by intraoperative O-arm imaging is a safe, effective, and minimally invasive procedure for treating degenerative cervical radiculopathy that can provide accurate cannula placement and thorough decompression.