Biomechanical comparison of the fixation after curved periacetabular osteotomy using titanium and bioabsorbable screws

Use of oblique view in periacetabular osteotomy and delayed postoperative weight bearing reduce delayed union in the ischium after one year

This study aimed to determine the efficacy of using both the postero-anterior and oblique image intensifier views intra-operatively and late start of post-operative partial weight-bearing (PWB) in reducing the incidence of delayed union in the ischium at one year after curved periacetabular osteotomy. We evaluated computed tomography images to clarify the incidence of delayed union at the osteotomy sites at one year post-operatively for 117 hips in 104 patients. Fifty-eight hips in 54 patients with use of both the postero-anterior and oblique image intensifier views intra-operatively and late start of post-operative PWB were assigned to the oblique view and late PWB group (OL group) and 59 hips in 50 patients with use of only the postero-anterior image intensifier view intra-operatively and early start of post-operative PWB were assigned to the control group (C group). In univariate analyses, the incidence of delayed union in the ischium at one year post-operatively was significantly lower in the OL group (3.5%) than in the C group (22%). Use of both the postero-anterior and oblique image intensifier views during curved periacetabular osteotomy and late start of PWB were effective for reducing delayed union of the ischium at one year post-operatively.

Maintenance of acetabular correction following PAO: a multicenter study comparing stainless-steel and titanium screws

Stainless-steel screws are commonly used for fragment fixation during periacetabular osteotomy (PAO) at our institutions. Titanium is reserved for patients with documented nickel allergies. Titanium screws possess a significantly lower Young's modulus than stainless steel and, therefore, potentially less resistance to physiologic loading. Thus, we hypothesized that the use of titanium screws might be associated with changes in acetabular correction prior to healing. The aim of this study was to compare the maintenance of acetabular correction following PAO using stainless-steel or titanium screws. A documented nickel allergy was confirmed with an allergy specialist. Patients' age at surgery, gender and BMI were collected. The lateral center-edge angle of Wiberg (LCEA), medial center-edge angle (MCEA), anterior wall index (AWI), posterior wall index (PWI) and Tönnis angle were measured. The delta value for radiographic parameters was calculated as the difference between values immediately post-operation and at 6 months post-operation. Only age at surgery (P < 0.001) and the pre-operative LCEA (P = 0.013) were significantly different between groups (Tables I and II). The remaining pre- and post-operative radiological measurements were similar (Table II). Comparison of delta values at 6 months follow-up indicated no significant differences between screw types (Table III). No patients in the titanium group had a trans-iliac retrograde screw included in their construct (P = 0.003). All patients healed from their osteotomies. The use of titanium screws in patients with an allergy to nickel was not associated with differences in acetabular correction or the rate of osseous union rates despite its lower inherent mechanical properties.

Advances in fixation strength of reorienting rectangular triple pelvic innominate osteotomies - A biomechanical investigation of two screw fixation techniques

BACKGROUND

Reorientating pelvic osteotomies are performed to prevent femoral-acetabular impingement or degenerative arthritis. A Toennis-Kalchschmidt triple pelvis innominate osteotomy is used in symptomatic patients. This study aimed to investigate the biomechanical behaviour of two different acetabular screw configurations for triple pelvis innominate osteotomy osteosynthesis.

METHODS

Two screw-orientation techniques in rectangular os ilium osteotomy were compared by osteotomising 12 artificial hemipelvises with triple pelvis innominate osteotomy protocol (fragment reorientation: 10.5° inclination and 10.0° anteversion) and randomising them in 2 groups (n = 6) for implantation with three 4.5 mm screws. Bidirectional group had a bidirectional screw orientation and Monoaxial group had a monoaxial direction of all three screws through iliac crest. All specimens were tested under progressively increasing cyclic loading until failure. Group-wise comparisons of acetabular cup medialisation, anteversion and inclination were evaluated via motion tracking at cycles 250, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, and 2500. Failure was defined as reaching 5° inclination or 5° anteversion.

FINDINGS

Acetabular cup medialisation (p ≤ 0.026), anteversion (p ≤ 0.021) and inclination (p ≤ 0.039) all increased significantly during testing in both groups. There were no significant differences for the group-wise comparisons at the cycle points defined in the methods (p ≥ 0.182). No significant differences were detected between groups for cycles to failure and failure load (p = 0.873).

INTERPRETATION

Bidirectional screw alignment does not lead to significant advantages compared to pure monoaxial if all three axial screws are evenly distributed over the osteotomy geometry. The triple pelvis innominate osteotomy is susceptible to changes in anteversion, inclination and medialisation under partial weight-bearing. Cautious rehabilitation protocols are recommended.

[Fixation techniques in periacetabular osteotomy : Stability and clinical aspects of established and new fixation techniques]

Periacetabular osteotomy according to Ganz (PAO) is an established technique for the surgical treatment of hip dysplasia with the aim of biomechanically optimizing the dysplastic hip joint. Through multidimensional reorientation, the deficient coverage of the femoral head can be improved and physiological values can be achieved. Until bony consolidation is reached, adequate fixation of the acetabulum in the corrected position achieved is necessary. Various fixation techniques are available for this purpose. Alternatively to screws, Kirschner wires can also be used for fixation. The different fixation techniques show comparable stability. Differences exist in the occurrence of implant-associated complications. However, there is no difference in patient satisfaction and joint-specific function.

Fixation stability and implant-associated complications in periacetabular osteotomy: a comparison of screw and K-wire fixation

AIMS

The aim of this study was to compare the fixation stability and complications in patients undergoing periacetabular osteotomy (PAO) with either K-wire or screw fixation.

PATIENTS AND METHODS

We performed a retrospective study to analyze a consecutive series of patients who underwent PAO with either screw or K-wire fixation. Patients who were treated for acetabular retroversion or had previous surgery on the ipsilateral hip joint were excluded. 172 patients (191 hips: 99 K-wire/92 screw fixation) were included. The mean age at the time of PAO was 29.3 years (16-48) in the K-wire group and 27.3 (15-45) in the screw group and 83.9% were female. Clinical parameters including duration of surgery, minor complications (soft tissue irritation and implant migration) and major complications (implant failure and non-union) were evaluated. Radiological parameters including LCE, TA and FHEI were measured preoperatively, postoperatively and at 3-months follow-up.

RESULTS

Duration of surgery was significantly reduced in the K-wire group with 88.2 min (53-202) compared to the screw group with 119.7 min (50-261) (p < 0.001). Soft tissue irritation occurred significantly more often in the K-wire group (72/99) than in the screw group (36/92) (p < 0.001). No group showed significantly more implant migration than the other. No major complications were observed in either group. Postoperative LCE, TA and FHEI were improved significantly in both groups for all parameters (p = < 0.0001). There was no significant difference for initial or final correction for the respective parameters between the two groups. Furthermore, no significant difference in loss of correction was observed between the two groups for the respective parameters.

CONCLUSION

K-wire fixation is a viable and safe option for fragment fixation in PAO with similar stability and complication rates as screw fixation. An advantage of the method is the significantly reduced operative time. A disadvantage is the significantly higher rate of implant-associated soft tissue irritation, necessitating implant removal.

LEVEL OF EVIDENCE

III, retrospective trial.

Is transverse screw fixation really necessary in PAO?-A comparative in vivo study

The optimal fixation technique in periacetabular osteotomy (PAO) remains controversial. This study aims to assess the in vivo stability of fixation in PAO with and without the use of a transverse screw. We performed a retrospective study to analyse consecutive patients who underwent PAO between January 2015 and June 2017. Eighty four patients (93 hips) of which 79% were female were included. In 54 cases, no transverse screw was used (group 1) compared with 39 with transverse screw (group 2). Mean age was 26.5 (15–44) in group 1 and 28.4 (16–45) in group 2. Radiological parameters relevant for DDH including lateral center edge angle of Wiberg (LCEA), Tönnis angle (TA) and femoral head extrusion index (FHEI) were measured preoperatively, post-operatively and at 3-months follow-up. All patients were mobilized with the same mobilization regimen. Post-operative LCEA, TA and FHEI were improved significantly in both groups for all parameters (P ≤ 0.0001). Mean initial correction for LCEA (P = 0.753), TA (P = 0.083) and FHEI (P = 0.616) showed no significant difference between the groups. Final correction at follow-up of the respective parameters was also not significantly different between both groups for LCEA (P = 0.447), TA (P = 0.100) and FHEI (P = 0.270). There was no significant difference between initial and final correction for the respective parameters. Accordingly, only minimal loss of correction was measured, showing no difference between the two groups for LCEA (P = 0.227), TA (P = 0.153) and FHEI (P = 0.324). Transverse screw fixation is not associated with increased fragment stability in PAO. This can be taken into account by surgeons when deciding on the fixation technique of the acetabular fragment in PAO.

Sciatic Nerve Palsy following Curved Periacetabular Osteotomy

Curved periacetabular osteotomy (CPO) is used for the treatment of dysplastic hips. Previous studies have reported satisfying outcomes and low rate of severe complications associated with this procedure; however, no case of postoperative sciatic nerve palsy has been reported. In this study, we describe a case of postoperative sciatic nerve palsy following CPO due to nerve strangulation by scar tissue without direct injury. A female patient had severe buttock pain and posterior leg numbness after she underwent left-side CPO. Postoperative magnetic resonance imaging showed that the sciatic nerve was strangulated by the surrounding soft tissue. There was no bone fragment, active infection, bone necrosis, tumor, or spine disease. Therefore, we diagnosed nerve palsy by soft tissue strangulation, and revision surgery was indicated. During revision surgery, the sciatic nerve was observed to be strangulated by the scarring soft tissue, and the nerve had no mobility. After detachment, the pain and numbness disappeared. Direct injury of the sciatic nerve should not be caused by CPO; however, there is a possibility of postoperative sciatic nerve palsy due to the scarring soft tissue. Early diagnosis and appropriate treatment are important for optimal postoperative clinical outcomes.

Innominate Salter osteotomy using resorbable screws: a retrospective case series and presentation of a new concept for fixation

PURPOSE

The Salter innominate osteotomy (SIO) in children is traditionally stabilized by Kirschner-wires, which have issues regarding stability, infection and the need to be extracted. To counter these disadvantages, we present a surgical method to stabilize SIO with modern resorbable poly lactic-co-glycolic acid screws. Using a case series of 21 patients treated with SIO for developmental dysplasia of the hip or Legg-Calvé-Perthes disease we evaluate the feasibility of the method.

METHODS

The integrity of the osteotomy was interpreted by radiological measurements of acetabular index, centre-edge angle and Reimer's index. Perioperative and postoperative complications were evaluated.

RESULTS

Radiographic evaluation revealed a stable osteotomy and favourable development in all measured parameters with the exception of one patient who fell out of bed the first day postoperatively. No other perioperative surgical complications were observed and there were no local reactions to the resorbable screws.

CONCLUSION

Modern resorbable screws carry multiple benefits both for the patient and the surgeon. In our case series the implants provided sufficient stability and the implants caused no local reactions. The use of resorbable implants gave the surgeon a wider range of possible screw placements and avoided the need for implant removal.

LEVEL OF EVIDENCE

Level IV - Case series.

Curved periacetabular osteotomy via a novel intermuscular approach between the sartorius and iliac muscles

INTRODUCTION

Herein, we describe and evaluate a curved periacetabular osteotomy (CPO) via an intermuscular approach (IM-CPO) between the sartorius and iliac muscles.

METHODS

Between January 2009 and January 2016, IM-CPO was performed in 17 joints (16 patients), and a traditional CPO was performed in 17 joints. The length of incision at wound closure, operative time, intraoperative blood loss, serum creatinine kinase (CK) level the day after surgery, correctional angle, walking ability assessed using the gait items of the Harris Hip Score (at 3 and 6 months after surgery), and perioperative complications were evaluated. Group differences were assessed using t-tests.

RESULTS

The IM-CPO and CPO groups did not differ in the mean operative time (130 minutes and 124 minutes, respectively), mean serum CK the day after surgery (349 IU/L and 425 IU/L, respectively), or mean correctional angle (24.9° and 24.6°, respectively). The mean incision length was significantly shorter in the IM-CPO group (8.3 cm) compared to that in the CPO group (9.5 cm). The mean walking ability was significantly higher in the IM-CPO group (24.2 points) compared to that in the CPO group (20.9 points) at 3 months after surgery, but not at 6 months after surgery (26.4 points and 24.9 points, respectively). No serious complications were observed in either group.

CONCLUSION

In addition to demonstrating a similarly satisfactory correctional angle, IM-CPO is anticipated to enable early weight-bearing and recovery of walking ability. Thus, IM-CPO is considered a superior surgical technique.