Chronological changes in functional cup position at 10 years after total hip arthroplasty

Spinopelvic interactions in total hip arthroplasty: 295 patients followed for a minimum follow-up of 10 years

BACKGROUND

Concurrent spinal pathology is frequent in patients undergoing total hip arthroplasty (THA). In this study we examined whether spinopelvic interactions affect THA outcomes at a minimum follow-up of 10 years.

PATIENTS AND METHODS

295 patients with a mean age of 63.3 (range 56‒80) years receiving a THA between 2006 and 2009 were assessed. Of these, 195 had mild lumbar disc degeneration and 100 had advanced lumbar spondylosis. We analysed the changes in the Harris Hip Score (HHS) and the survival rate for postoperative low back pain (LBP) and dislocation. Changes in acetabular component position, sacro-femoral-pubic (SFP) and pelvic obliquity (PO) angles were assessed with radiological images.

RESULTS

The mean HHS was lower in female patients (p = 0.009), patients >65 years of age (p < 0.001) and those with advanced lumbar spondylosis (p = 0.002). 52 (71.2%) of the patients reporting preoperative LBP experienced improvement after THA while 47 (21.1%) of those without preoperative LBP postoperatively reported new onset LBP. Female patients (p = 0.025; hazard ratio [HR]: 1.831; 95% CI, 1.081-3.101) and those with preoperative LBP (p = 0.007; HR 2.068; 95% CI, 1.221-3.504) were at a higher risk of developing postoperative LBP at 10 years. 4 out of 9 THA dislocations were late and had shown decreasing SFP angle values over time. Acetabular component inclination and anteversion angles increased over time, whereas the SFP angle was associated with sex and age and the PO angle with age and the severity of any preoperative lumbar degeneration.

CONCLUSIONS

Concurrent spinal pathology influences THA outcomes at a minimum follow-up of 10 years. Sex, age, and associated lumbar degeneration can affect clinical and radiological changes over time. A decrease in SFP angle values over time was found in patients sustaining late dislocation.

The effect of ethnicity on the age-related changes of spinopelvic characteristics: a systematic review

Aims

Spinopelvic characteristics influence the hip’s biomechanical behaviour. However, to date there is little knowledge defining what ‘normal’ spinopelvic characteristics are. This study aims to determine how static spinopelvic characteristics change with age and ethnicity among asymptomatic, healthy individuals.

Methods

This systematic review followed the Preferred Reporting Items for Systematic Review and Meta-Analyses guidelines to identify English studies, including ≥ 18-year-old participants, without evidence of hip or spine pathology or a history of previous surgery or interventional treatment, documenting lumbar lordosis (LL), sacral slope (SS), pelvic tilt (PT), and pelvic incidence (PI). From a total of 2,543 articles retrieved after the initial database search, 61 articles were eventually selected for data extraction.

Results

When all ethnicities were combined the mean values for LL, SS, PT, and PI were: 47.4° (SD 11.0°), 35.8° (SD 7.8°), 14.0° (SD 7.2°), and 48.8° (SD 10°), respectively. LL, SS, and PT had statistically significant (p < 0.001) changes per decade at: −1.5° (SD 0.3°), −1.3° (SD 0.3°), and 1.4° (SD 0.1°). Asian populations had the largest age-dependent change in LL, SS, and PT compared to any other ethnicity per decade at: −1.3° (SD 0.3°) to −0.5° (SD 1.3°), –1.2° (SD 0.2°) to −0.3° (SD 0.3°), and 1.7° (SD 0.2°) versus 1.1° (SD 0.1°), respectively.

Conclusion

Ageing alters the orientation between the spine and pelvis, causing LL, SS, and PT to modify their orientations in a compensatory mechanism to maintain sagittal alignment for balance when standing. Asian populations have the largest degree of age-dependent change to their spinopelvic parameters compared to any other ethnicity, likely due to their lower PI.

Cite this article: Bone Joint Res 2023;12(4):231–244.

What Changes in Pelvic Sagittal Tilt Occur 20 Years After THA?

BACKGROUND

Cup orientation in THA in the supine, standing, and sitting positions is affected by pelvic sagittal tilt (PT). Patterns of PT shift between these positions may increase the risk of dislocation and edge loading. The PT has also been reported to change during the aging process; however, there is limited research regarding long-term changes in PT and PT shifts after THA.

QUESTIONS/PURPOSES

(1) What changes occur in PT in the supine, standing, and sitting positions during 20 years of follow-up after THA in patients who have not had revision or dislocation? (2) What factors are associated with the differences between preoperative supine PT and postoperative sitting or standing PT (Δ sitting and Δ standing, respectively) 20 years postoperatively?

METHODS

Between January 1998 and December 1999, 101 consecutive patients underwent THA for appropriate indications. AP radiographs of the pelvis in the supine, standing, and sitting positions preoperatively and at 1, 10, and 20 years after THA were longitudinally performed to evaluate changes in PT. Fifty-nine percent (60 of 101) of patients were lost before 20 years of follow-up or had incomplete sets of imaging tests, leaving 41% (41 of 101) eligible for analysis here. There were no patients who had recurrent dislocation or underwent revision arthroplasty in the cohort; therefore, this analysis regarding postoperative changes in PT indicates the natural course of the change in PT during follow-up of THA. PT was measured based on the anterior pelvic plane. PT shifts with positional changes, Δ standing, and Δ sitting during the follow-up period were calculated. Posterior changes and shifts are represented by negative values. To analyze the factors associated with Δ standing and Δ sitting after 20 years, the correlations between these parameters and preoperative factors (including sex, age, pelvic incidence [PI], lumbar lordosis [LL], preoperative PT, and preoperative PT shift) and postoperative factors (including the occurrence of new lumbar vertebral fractures, lumbar spondylolisthesis, contralateral THA performed during follow-up, and PI-LL 20 years after THA) were determined.

RESULTS

Median (IQR) supine and standing PTs changed (moved posteriorly) by -5° (-11° to -2°; p < 0.01) and -10° (-15° to -7°; p < 0.01), respectively. Sitting PT did not change during the 20-year follow-up period. Median (IQR) PT shift from standing to sitting changed from -34° preoperatively (-40° to -28°) to -23° after 20 years (-28° to -20°). There were posterior changes in median (range) Δ standing (median -12° at 20 years [-19° to -7°]); Δ sitting did not change during the follow-up period (median -36° at 20 years [-40° to -29°]). Patients with a large preoperative posterior PT shift from supine to standing demonstrated larger posterior tilt of Δ standing at 20 years. Patients with lumbar vertebral fractures during follow-up demonstrated larger posterior tilt of Δ standing at 20 years.

CONCLUSION

Patients who demonstrate a large preoperative posterior shift from supine to standing deserve special consideration when undergoing THA. In such circumstances, we recommend that the anteversion of the cup not be excessive, given that there is a relatively high risk of further posterior tilt in PT, which may lead to anterior dislocation and edge loading. Further longitudinal study in a larger cohort of patients with complications including postoperative dislocation and revision, as well as older patients, is needed to verify these assumptions on the potential risk for dislocation and edge loading after THA.

LEVEL OF EVIDENCE

Level III, therapeutic study.

Reliability and Validity Analysis of Pelvic Sagittal Inclination Calculated by Inverse Cosine Function Method on Pelvic Anteroposterior Radiographs

Objective

Evaluation of sagittal pelvic tilt is significant for hip surgeons. However, the accurate measurement of pelvic sagittal inclination (PSI) is still a challenge. The objective of this study is to propose a new method for measurement of PSI from pelvic anteroposterior radiograph based on the inverse cosine function obtained from individualized pelvic model.

Methods

Collecting the imaging data of 30 patients with both pelvic CT and full‐length spine radiographs. Establishing pelvic model by customized 3D reconstruction software. The length of three groups of longitudinal and transverse line segments (A′p and B′) were measured from full‐length spine anteroposterior radiographs. The corresponding anatomical parameters, including A, B, b, ∠α, ∠γ, were measured and calculated on the same patient's pelvic model. The estimated PSI (ePSI) based on three groups of anatomical landmarks, including ePSI‐1, ePSI‐2, and ePSI‐3, were calculated by equation, ePSI=arccosA′pb*B′−∠α, and compared with the actual PSI (aPSI) measured by Surgamap software. For the reliability and validation evaluation, three observers measured these parameters in two rounds. Intra‐class correlation and inter‐class correlation were both calculated. Bland–Altman method was used to evaluate the consistency between the estimated PSI (ePSI) and the actual PSI (aPSI).

Results

ePSI‐1 and ePSI‐2 showed excellent intra‐observer reliability (0.921–0.997, p < 0.001) and inter‐observer reliability (0.801–0.977, p < 0.001). ePSI‐3 had a fair inter‐observer reliability (0.239–0.823, p < 0.001). ePSI‐1 showed the strongest correlation with aPSI (r = 0.917, p < 0.001). Mean (maximum) absolute difference of ePSI‐1, ePSI‐2, and ePSI‐3 is 2.62° (7.42°), 4.23° (13.78°), and 7.74° (31.47°), respectively. The proportion of cases with absolute difference less than 5° in three groups were 86.7% (ePSI‐1), 66.7% (ePSI‐2), 56.7% (ePSI‐3).

Conclusion

This new method based on inverse cosine function has good reliability and validity when used in the evaluation of PSI on pelvic anteroposterior radiographs.

The accuracy in determining pelvic tilt from anteroposterior pelvic radiographs in patients awaiting hip arthroplasty

Spinopelvic mobility affects outcome after THA. Whether the sacro-femoral-pubic (SFP) angle, measured on AP radiographs, can be reliably used to estimate pelvic tilt (PT) in hip osteoarthritis patients is unknown. This study aimed to (1) validate the use of the SFP angle in the calculation of PT from AP radiographs, and (2) identify individual patient factors affecting the estimation of PT. A cohort of 100 patients awaiting THA for end-stage hip osteoarthritis was prospectively studied. AP and lateral radiographs, taken in the standing and relaxed-seated positions were evaluated for spinopelvic measurements (SFP, PT, and pelvic incidence [PI]). To validate the SFP angle, estimated PT values using the formula [PT = 75°-SFP] were compared to the true, measured values from the lateral radiographs. Despite good agreement for the estimated and true PT (16.2 ± 5.9° vs. 15.5 ± 8.6°; p = .315), a significantly poorer agreement could be found between the two methods at high or low values of PT. Patient-specific PI correlated with the difference between the two measurement methods (Pearson's r = -0.644; p < .001). However, the change in SFP angle equaled approximately the change in pelvic tilt (∆PT = 2°-∆SFP; Pearson's r = -0.934; p < .001). Absolute values for the sagittal PT should not be estimated from AP pelvic radiographs in patients awaiting total hip arthroplasty. However, the relative change in PT between different positions equals approximately the change in SFP angle. This may allow functional cup orientation after THA to be determined between different postures from an AP radiograph of the pelvis. The SFP angle has moderate accuracy in determining a patient's pelvic tilt; however, it can accurately determine a patient's change in pelvic tilt in different positions.

Spinopelvic alignment and low back pain after total hip arthroplasty: a scoping review

OBJECTIVE

Spinopelvic alignment is increasingly considered as an essential factor for maintaining an energy-efficient posture in individuals with normal or pathological status. Although several previous studies have shown that changes in the sagittal spinopelvic alignment may occur in patients undergoing total hip arthroplasty (THA), no review of this area has been completed so far. Thus, the objective of this scoping review was to summarize the evidence investigating changes in spinopelvic alignment and low back pain (LBP) following THA.

DATA SOURCES

We adhered to the established methodology for scoping reviews. Four electronic databases were systematically searched from inception-December 31, 2021.

STUDY SELECTION

We selected prospective or retrospective observational or intervention studies that included patients with THA.

DATA EXTRACTION

Data extraction and levels of evidence were independently performed using standardized checklists.

DATA SYNTHESIS

A total of 45 papers were included in this scoping review, involving 5185 participants with THA. Pelvic tilt was the most common parameter measured in the eligible studies (n = 26). The results were not consistent across all studies; however, it was demonstrated that the distribution of pelvic tilt following THA had a range of 25° posterior to 20° anterior. Moreover, decreased sacral slope and lower pelvic incidence were associated with increased risk of dislocation in patients with THA. Lumbar spine scoliosis did not change significantly after THA in patients with bilateral hip osteoarthritis (5.50°(1.16°) vs. 3.73°(1.16°); P-value = 0.29). Finally, one study indicated that LBP improvement was not correlated with postoperative changes in spinopelvic alignment parameters. Several methodological issues were addressed in this study, including no sample size calculation and no type-I error adjustment for outcome multiplicity.

CONCLUSIONS

Changes in spinopelvic alignment may occur after THA and may improve with time. Patients with a THA dislocation usually show abnormal spinopelvic alignment compared to patients without a THA dislocation. LBP usually improves markedly over time following THA.

Lewinnek Safe Zone References are Frequently Misquoted

BACKGROUND

Optimal acetabular component orientation in total hip arthroplasty (THA) is a necessity in achieving a stable implant. Although there has been considerable debate in the literature concerning the safe zone, to date, there has not been any review to determine if these references are consistent with the definition applied by Lewinnek et al. in 1978. Therefore, this article aims to examine the available literature in the PubMed database to determine how often a correct reference to the safe zone as defined by Lewinnek was applied to discussions regarding THA.

METHODS

A search for literature in the PubMed database was performed for articles from 1978 to 2019. Search criteria included terms 'Lewinnek,' 'safe zone,' and 'total hip arthroplasty.' Exclusions included abstract-only articles, non-English articles, articles unrelated to THA, and those lacking full content.

RESULTS

A review of literature yielded 147 articles for inclusion. Overall, only 11% (17) cited the Lewinnek article correctly. Forty-five percent (66) of articles referenced measurements in the supine position, 18% (26) referenced other positions, and 37% (55) did not specify. Nineteen percent (28) reported measurements of the acetabular cup orthogonal to the anterior pelvic plane, while 73% (108) did not, and 7% (11) did not specify. Twenty-three percent (34) measured from computed tomography scans instead of other methods.

CONCLUSIONS

In the discussion of the safe zone regarding THA, only 11% of articles listed are consistent with the definition established by Lewinnek. This warrants further investigation into a consistent application of the term and its implications for THA implant stability and dislocation rates.

Does Functional Cup Orientation Change at Minimum of 10 Years After Primary Total Hip Arthroplasty?

BACKGROUND

Cup orientation has been shown to influence the postoperative risk of impingement and dislocation following total hip arthroplasty (THA) and may change over time due to changes in pelvic tilt that occur with aging. The purpose of this study is to determine if there is a significant change in acetabular cup inclination and anteversion over a 10-year period following THA.

METHODS

A retrospective, multisurgeon, single-center cohort study was conducted of 46 patients that underwent THA between 1995 and 2002. A total of 46 patients were included, with a median age at surgery of 56 years, and a median time between initial postoperative radiograph and the most recent one being 13.5 years (minimum 10 years). Cup orientation was measured from postoperative and follow-up supine anterior-posterior pelvic radiographs. Using a validated software, inclination and anteversion were calculated at each interval and the change in cup anteversion and inclination angle was determined. Furthermore, the difference in the sacro-femoral-pubic angle was measured, reflecting the difference in pelvic tilt between intervals.

RESULTS

No significant difference was detected between measurements taken from initial postoperative radiograph and measurements a minimum of 10 years later (P > .45), with the median (interquartile range) change in anteversion, inclination, and sacro-femoral-pubic being 0° (-1° to 3°), 1° (-3° to 2°), and 0° (-2° to 3°), respectively.

CONCLUSION

Our study found no significant change in functional cup orientation a minimum of 10 years after THA. No shifts in functional cup orientation as a result of altering spinopelvic alignment seemed to be present over a 10-year period.

The Impact of Spinopelvic Mobility on Arthroplasty: Implications for Hip and Spine Surgeons

Spinopelvic mobility represents the complex interaction of hip, pelvis, and spine. Understanding this interaction is relevant for both arthroplasty and spine surgeons, as a predicted increasing number of patients will suffer from hip and spinal pathologies simultaneously. We conducted a comprehensive literature review, defined the nomenclature, summarized the various classifications of spinopelvic mobility, and outlined the corresponding treatment algorithms. In addition, we developed a step-by-step workup for spinopelvic mobility and total hip arthroplasty (THA). Normal spinopelvic mobility changes from standing to sitting; the hip flexes, and the posterior pelvic tilt increases with a concomitant increase in acetabular anteversion and decreasing lumbar lordosis. Most classifications are based on a division of spinopelvic mobility based on ΔSS (sacral slope) into stiff, normal, and hypermobile, and a categorization of the sagittal spinal balance regarding pelvic incidence (PI) and lumbar lordosis (LL) mismatch (PI–LL = ± 10° balanced versus PI–LL > 10° unbalanced) and corresponding adjustment of the acetabular component implantation. When performing THA, patients with suspected pathologic spinopelvic mobility should be identified by medical history and examination, and a radiological evaluation (a.p. pelvis standing and lateral femur to L1 or C7 (if EOS (EOS imaging, Paris, France) is available), respectively, for standing and sitting radiographs) of spinopelvic parameters should be conducted in order to classify the patient and determine the appropriate treatment strategy. Spine surgeons, before planned spinal fusion in the presence of osteoarthritis of the hip, should consider a hip flexion contracture and inform the patient of an increased risk of complications with existing or planned THA.

The Impingement-free, Prosthesis-specific, and Anatomy-adjusted Combined Target Zone for Component Positioning in THA Depends on Design and Implantation Parameters of both Components

BACKGROUND

Lewinnek's recommendation for orienting the cup in THA is criticized because it involves a static assessment of the safe zone and because it does not consider stem geometry. A revised concept of the safe zone should consider those factors, but to our knowledge, this has not been assessed.

QUESTIONS/PURPOSES

(1) To determine the shape, size, and location of target zones for combined cup and stem orientation for a straight stem/hemispheric cup THA to maximize the impingement-free ROM and (2) To determine whether and how these implant positions change as stem anteversion, neck-shaft angle, prosthetic head size and target range of movements are varied.

METHODS

A three-dimensional computer-assisted design model, in which design geometry was expressed in terms of parameters, of a straight stem/hemispheric cup hip prosthesis was designed, its design parameters modified systematically, and each prosthesis model was implanted virtually at predefined component orientations. Functional component orientation referencing to body planes was used: cups were abducted from 20° to 70°, and anteverted from -10° to 40°. Stems were rotated from -10° to 40° anteversion, neck-shaft angles varied from 115° to 143°, and head sizes varied from 28 to 40 mm. Hip movements up to the point of prosthetic impingement were tested, including simple flexion/extension, internal/external rotation, ab/adduction, combinations of these, and activities of daily living that were known to trigger dislocation. For each combination of parameters, the impingement-free combined target zone was determined. Maximizing the size of the combined target zone was the optimization criterion.

RESULTS

The combined target zones for impingement-free cup orientation had polygonal boundaries. Their size and position in the diagram changed with stem anteversion, neck-shaft angle, head size, and target ROM. The largest target zones were at neck-shaft angles from 125° to 127°, at stem anteversions from 10° to 20°, and at radiographic cup anteversions between 17° and 25°. Cup anteversion and stem anteversion were inverse-linearly correlated supporting the combined-anteversion concept. The range of impingement-free cup inclinations depended on head size, stem anteversion, and neck-shaft angle. For a 127°-neck-shaft angle, the lowest cup inclinations that fell within the target zone were 42° for the 28-mm and 35° for the 40-mm head. Cup anteversion and combined version depended on neck-shaft angle. For head size 32-mm cup, anteversion was 6° for a 115° neck-shaft angle and 25° for a 135°-neck-shaft angle, and combined version was 15° and 34° respectively.

CONCLUSIONS

The shape, size, and location of the combined target zones were dependent on design and implantation parameters of both components. Changing the prosthesis design or changing implantation parameters also changed the combined target zone. A maximized combined target zone was found. It is mandatory to consider both components to determine the accurate impingement-free prosthetic ROM in THA.

CLINICAL RELEVANCE

This study accurately defines the hypothetical impingement-free, design-specific component orientation in THA. Transforming it into clinical precision may be the case for navigation and/or robotics, but this is speculative, and as of now, unproven.

Pelvic rotation after total hip arthroplasty is dynamic and variable

AIMS

The aims of this study were to determine the change in the sagittal alignment of the pelvis and the associated impact on acetabular component position at one-year follow-up after total hip arthroplasty (THA).

METHODS

This study represents the one-year follow-up of a previous short-term study at our institution. Using the patient population from our prior study, the radiological pelvic ratio was assessed in 91 patients undergoing THA, of whom 50 were available for follow-up of at least one year (median 1.5; interquartile range (IQR) 1.1 to 2.0). Anteroposterior radiographs of the pelvis were obtained in the standing position preoperatively and at one year postoperatively. Pelvic ratio was defined as the ratio between the vertical distance from the inferior sacroiliac (SI) joints to the superior pubic symphysis and the horizontal distance between the inferior SI joints. Apparent acetabular component position changes were determined from the change in pelvic ratio. A change of at least 5° was considered clinically meaningful.

RESULTS

Pelvic ratio decreased (posterior tilt) in 54.0% (27) of cases, did not change significantly in 34.0% (17) of cases, and increased (anterior tilt) in 12.0% (6) of cases when comparing preoperative to one-year postoperative radiographs. This would correspond with 5° to 10° of abduction error in 22.0% of cases and > 10° of error in 6.0%. Likewise, this would correspond with 5° to 10° of version error in 22.0% of cases and > 10° of error in 44.0%.

CONCLUSION

Pelvic sagittal alignment is dynamic and variable after THA, and these changes persist to the one-year postoperative period, altering the orientation of the acetabular component. Surgeons who individualize the acetabular component placement based on preoperative functional radiographs should consider that the rotation of the pelvis (and thus the component version and inclination) changes one year postoperatively. Cite this article: Bone Joint J 2020;102-B(7 Supple B):47-51.

Effect of pelvic tilt and rotation on cup orientation in standing anteroposterior radiographs

BACKGROUND

Individual pelvic tilt and rotation have wide variability that can affect the measurement of cup orientation in anteroposterior (AP) radiographs. The purpose of this study was to analyse the effect of pelvic tilt and rotation on radiographic measurements of cup orientation.

METHODS

A total of 53 patients (63 hips) were included in this study. The patients underwent a computed tomography study with standing AP pelvis radiographs taken both preoperatively and approximately 3 months postoperatively. We used 2-dimensional/3-dimensional matching to measure the pelvic tilt and rotation, and the non-standardised and standardised cup orientation.

RESULTS

There was no difference in the pelvic tilt and rotation between the preoperative and postoperative radiographs. The distribution of the differences between the non-standardised and standardised cup anteversion exhibited a change within 5° in only 34/63 (54%) hips. The pelvic tilt correlated with the difference between the non-standardised and standardised cup anteversion, but the pelvic rotation did not. When all 63 hips were separated into the right and left sides, the pelvic rotation inversely correlated with the pelvic tilt-adjusted difference between the non-standardised and standardised cup anteversion of the right side but directly correlated with that of the left side.

CONCLUSIONS

The current study demonstrated that the measurement of cup anteversion in standing AP radiographs is significantly affected by both the pelvic tilt and pelvic rotation. An improved understanding of the pelvic orientation may eventually allow for desired cup positioning on a patient-specific basis to potentially reduce complications associated with the malposition of the cup.

Influence of Spinopelvic Alignment on Pelvic Tilt after Total Hip Arthroplasty

Objective

To evaluate the impact of spinopelvic parameters and hip contracture on change in the pelvic tilt (PT) after Total hip arthroplasty (THA).

Methods

One hundred patients (15 male and 85 female) who underwent THA were included in this prospective study. Radiographic data were obtained preoperatively and 1 year after THA. Radiographic parameters included sagittal anterior pelvic plane (APP), sagittal vertical axis (SVA), sacral slope (SS), pelvic inclination (PI), and lumbar lordosis angle (LL). The APP was defined as the angle between the anterior pelvic plane and the vertical plane. A positive value indicates pelvic retroversion. Postoperative changes in PT were divided into three groups: the PA group (pelvic anteversion, ΔAPP < −5°), the PR group (pelvic retroversion, ΔAPP > 5°), and the PT group (minimal change, ΔAPP ≤ ± 5°). The Kruskal–Wallis test and the Steel–Dwass test were used to compare the preoperative and postoperative spinopelvic parameters among the three groups. The Spearman's rank correlation coefficient was used to evaluate the correlation between ΔAPP and spinopelvic parameters.

Results

Minimal change in pelvic tilt was observed in 59% of patients, while pelvic anteversion was observed in 16% of patients and pelvic retroversion was observed in 25% of patients. There were no significant changes in the spinopelvic parameters, including TK, LL, SVA, LL, SS, and APP after THA. The Femoral angle (FA) was significantly decreased after THA (P < 0.001). Preoperative APP was significantly more retroverted in the PA group than the PR group, and the PT group (6.8 ± 12.2, 0.2 ± 9.9, −8.3 ± 8.3, P < 0.001). Preoperative SS, PI‐LL, and PI were significantly smaller in the PA group than the PT group and the PR group. A significant negative correlation was identified between preoperative APP and ΔAPP (r = −0.418, P < 0.001).

Conclusion

Approximately 60% of the patients did not have any marked change in PT after THA. Preoperative APP was the only predictive factor associated with marked anterior or posterior change in PT.

Highly crosslinked polyethylene wear rates and acetabular component orientation: a minimum ten-year follow-up

Aims

The aim of this study was to determine whether there is a difference in the rate of wear between acetabular components positioned within and outside the 'safe zones' of anteversion and inclination angle.

Patients and Methods

We reviewed 100 hips in 94 patients who had undergone primary total hip arthroplasty (THA) at least ten years previously. Patients all had the same type of acetabular component with a bearing couple which consisted of a 28 mm cobalt-chromium head on a highly crosslinked polyethylene (HXLPE) liner. A supine radiostereometric analysis (RSA) examination was carried out which acquired anteroposterior (AP) and lateral paired images. Acetabular component anteversion and inclination angles were measured as well as total femoral head penetration, which was divided by the length of implantation to determine the rate of polyethylene wear.

Results

The mean anteversion angle was 19.4° (-15.2° to 48°, sd 11.4°), the mean inclination angle 43.4° (27.3° to 60.5°, sd 6.6°), and the mean wear rate 0.055 mm/year (sd 0.060). Exactly half of the hips were positioned inside the 'safe zone'. There was no difference (median difference, 0.012 mm/year; p = 0.091) in the rate of wear between acetabular components located within or outside the 'safe zone'. When compared to acetabular components located inside the 'safe zone', the wear rate was no different for acetabular components that only achieved the target anteversion angle (median difference, 0.012 mm/year; p = 0.138), target inclination angle (median difference, 0.013 mm/year; p = 0.354), or neither target (median difference, 0.012 mm/year; p = 0.322).

Conclusion

Placing the acetabular component within or outside the 'safe zone' did not alter the wear rate of HXLPE at long-term follow-up to a level that risked osteolysis. HXLPE appears to be a forgiving bearing material in terms of articular surface wear, but care must still be taken to position the acetabular component correctly so that the implant is stable. Cite this article: Bone Joint J 2018;100-B:891-7.

Effect of Pelvic Tilt and Rotation on Cup Orientation in Both Supine and Standing Positions

BACKGROUND

The purpose of this study is to analyze the effect of pelvic tilt and rotation on radiographic measurement of cup orientation.

METHODS

A total of 68 patients (79 hips) were included in this study. The patients had a computed tomography study and approximately 3 months of postoperative standing anteroposterior pelvic radiographs in both supine and standing positions. We used 2-dimensional (2D)/3-dimensional (3D) matching to measure pelvic tilt and rotation, and cup orientation.

RESULTS

There was a wide range of pelvic tilt between individuals in both supine and standing positions. Supine pelvic tilt was different from standing pelvic tilt (P < .05). There were differences in cup anteversion before and after 2D/3D matching in both supine and standing positions (P < .05). Supine and standing pelvic tilt correlated with differences in cup anteversion before and after 2D/3D matching. When all 79 hips were separated into right and left side, pelvic rotation inversely correlated with the pelvic tilt-adjusted difference in anteversion before and after 2D/3D matching of the right side but directly correlated with that of the left side in both supine and standing positions.

CONCLUSION

This study demonstrated that the measurement of cup anteversion on anteroposterior radiographs is significantly affected by both pelvic tilt and pelvic rotation (depending on the side). Improved understanding of pelvic orientation and improved ability to measure pelvic orientation may eventually allow for desired cup positioning to potentially protect against complications associated with malposition of the cup.