Effect of ultrasonic cleaning on the bond strength of fiber posts in oval canals filled with a premixed bioceramic root canal sealer

Fiber post cemented using different adhesive strategies to root canal dentin obturated with calcium silicate-based sealer

BACKGROUND

Calcium silicate-based sealer has favorable properties for root canal filling, including hydroxyapatite formation during the setting process. However, this process can cause difficulty during post space preparation when the sealer is set. Additionally, the remaining sealer could interfere with the bond strength of fiber post to root canal dentin. The different adhesive strategies and fiber post cementation time may affect the bond strength of the fiber post. Thus, the objective of this study was to evaluate the effect of etching modes of Scotchbond™ Universal Plus adhesive and post cementation time on the push-out bond strength of a fiber post cemented in root canals obturated with calcium silicate-based sealer.

METHODS

Fifty-four teeth were randomly allocated to 6 groups (n = 9) based on etching modes: self-etch (SE) or etch-and-rinse (ER); post space preparation and cementation time: immediate (Im) or 7-day delayed (De): Im-Im, Im-De, and De-De. The root canals were obturated with calcium silicate-based sealer and the post space preparation was performed. The fiber post was cemented using RelyX™ Universal resin cement according to each group's design. For the push-out bond strength test, 1-mm slices of the coronal, middle, and apical regions were tested using a universal testing machine. The failure mode analysis was determined using a stereomicroscope. The data was analyzed with three-way analysis of variance.

RESULTS

No negative effects of etching modes, post space preparation or cementation time on push-out bond strength were detected (p > 0.05). Additionally, the root canal region also did not significantly affect the bond strength (p > 0.05).

CONCLUSION

No significant differences were observed between the etching modes, post space preparation and cementation time and among root canal regions.

CLINICAL RELEVANCE

The different etching modes of adhesive and post cementation time did not affect the bond strength of fiber post in calcium silicate filled-root canal.

A new method of adhesive system application improves the bond strength between fiber post and root dentin

This study evaluated a new method of adhesive system application on the bond strength between fiber post and root dentin using two adhesive systems. The canals of sixty bovine incisors were prepared and obturated. The roots were divided into six groups (n=10) according to the adhesive system (Clearfil SE - CSE and Single Bond Universal - SBU) and the application strategy (microbrush - MB; rotary brush - RB; and ultrasonic tip - US). The glass fiber posts were cemented with resin cement (RelyX ARC). The roots were sectioned perpendicularly to their long axis, and three slices per root were obtained. Previously to the push-out test, confocal laser scanning microscopy (CLSM) was performed to illustrate the interfacial adaptation of the cement to the root canal walls. Failure patterns were analyzed with 40x magnification. Shapiro-Wilk indicated a normal distribution of the data. The bond strength values were compared using one-way ANOVA and Tukey's tests. Student's T test analyzed the differences between the adhesive systems within each third and protocol. A significance level of 5% was used. CSE with RB showed higher mean bond strength values compared to MB (conventional technique) (P < 0.05). US application resulted in intermediate bond strength values for CSE (P > 0.05). The application of SBU using RB generated higher mean bond strength values compared to MB and US (P < 0.05). Adhesive failures were predominant (65.5%). CSE and SBU application with the new rotary brush improved the bond strength of fiber posts to root dentin compared to the conventional strategy.

Evaluation of different mechanical cleaning protocols associated with 2.5% sodium hypochlorite in the removal of residues from the post space

Aims

This study evaluated the effectiveness of different mechanical protocols using rotary brush (RB), ultrasonic tip, and oscillatory system (OS) associated with 2.5% sodium hypochlorite (NaOCl) in the removal of residues and dentin permeability in the cervical and apical segments of the post space.

Settings and Design

Experimental in vitro study.

Methods

Forty roots from human first molars were prepared and divided into four groups according to the cleaning protocols: Control (CO), NaOCl 2.5% conventional irrigation with a syringe; RB associated with NaOCl 2.5%; ultrasonic tip (US) associated with NaOCl 2.5%; OS associated with NaOCl 2.5%.

Statistical Analysis Used

The persistence of residues was evaluated by scanning electron microscopy and data submitted to Kruskal-Wallis and Dunn tests, and dentin permeability evaluated by confocal microscopy and date submitted to ANOVA one-way and Tukey's tests (P = 0.05).

Results

There were no differences in residue cleaning among the CO, RB, US, and OS groups, regardless of the analyzed root segment (P > 0.05). When comparing groups, dentin permeability in the CO group was significantly lower in the cervical segment (P < 0.05).

Conclusions

The OS group promoted the highest permeability value in the apical segment. RB, US, and OS are similar in removing residues from the post space. However, OS results in higher dentin permeability in the apical segment.

Effect of endodontic sealers on push-out bond strength of CAD-CAM or prefabricated fiber glass posts

This study aimed to evaluate the effect of endodontic sealer (ES) on bond strength (BS) of prefabricated or milled-CAD-CAM (computer-aided design and computer-aided manufacturing) glass-fiber-posts (GFP). Canals of 90 single-rooted teeth were prepared for filling by the single-cone technique with gutta-percha and one of the following ES: AH Plus (epoxy resin), Endofill (zinc-oxide and eugenol), and Bio-C Sealer (calcium-silicate). After post-space preparation, tooth-specimens were equally divided in half according to type of GFP to be used. In the half to receive milled-CAD-CAM posts, tooth specimens were molded with acrylic resin to obtain replicas. These were scanned to enable the laboratory to produce the milled-CAD-CAM GFPs (Fiber CAD Lab, Angelus) by the subtractive technique. The other half of samples received prefabricated GFPs (Exacto, Angelus) (n=15). The GFPs were cemented with dual-cure resin cement (Panavia F2.0, Kuraray). Each root was sectioned into two slices per root region (cervical, middle, apical) that were subjected to the push-out BS test, in a universal testing machine. Failure mode (FM) was classified by scores. The BS data were submitted to generalized linear model analyses, while FM was analyzed using the chi-square test (a=0.05). BS showed no significant difference among the three ES (p > 0.05). BS was significantly higher for prefabricated (mean 10.84 MPa) versus milled-CAD-CAM GFPs (mean 6.94 MPa) (p <0.0001), irrespective of ES. The majority showed mixed failures. It could be concluded that type of ES did not affect BS of GFPs to dentin, and prefabricated-GFPs had higher bond-strength than customized-milled-CAD-CAM GFPs.

Effect of bioceramic root canal sealers on the bond strength of fiber posts cemented with resin cements

This study aimed to evaluate the influence of calcium silicate-based sealers on the bond strength of fiber posts using conventional and self-adhesive resin cement. Sixty single-rooted teeth were selected. The canals were prepared with a reciprocating instrument 40.06. The roots were randomly distributed in six groups (n = 10) according to the strategies for root canal filling and fiber posts cementation: AH Plus/RelyX ARC; AH Plus/RelyX U200; Bio C Sealer/RelyX ARC; Bio C Sealer/RealyX U200; Sealer Plus BC/RelyX ARC; and Sealer Plus BC/RelyX U200. The roots were transversally sectioned, and one slice per post-third was obtained. The push-out test was performed at a crosshead speed of 1mm/min. The failure patterns were described after assessment with a stereomicroscope with a 10× magnification. Bond strength was calculated and analyzed using the ANOVA and Tukey test. AH Plus did not influence the bond strength of fiber posts cemented with conventional (RelyX ARC) or with self-adhesive resin cement (RelyX U200). The lowest bond strength values were obtained when calcium silicate-based sealers were associated with conventional resin cement (Bio C Sealer/RelyX ARC and Sealer Plus BC/RelyX ARC). Except for Sealer Plus BC/RelyX ARC, all groups presented lower bond strength at the apical portion compared to the cervical portion of the post. Adhesive failures between cement and post and cement and dentin were predominant (55.3%). Calcium silicate-based sealers decreased the bond strength of fiber posts cemented with conventional resin cement.

Effect of mechanical cleaning protocols in the fiber post space on the adhesive interface between universal adhesive and root dentin

The aim of this study was to evaluate the effects of cleaning protocols on the presence of residues, open dentinal tubules, and bond strength of a self-etch adhesive plus a dual-cure resin cement to dentin in the fiber-post space. The methods for cleaning utilized were conventional irrigation (CI), rotary brush with continuous rotary movement (RB), and continuous ultrasonic irrigation (CUI). Sixty bovine incisors were used for fiber-post space preparation. Thirty roots were divided into three groups (n = 10) according to the cleaning protocols and submitted to scanning electron microscope to evaluate presence of residues and relative quantity of open dentinal tubules on dentin surface. Similar protocols were performed in the other thirty roots (n = 10) using a self-etching adhesive system (Scotchbond Universal) and a dual-cure resin cement (Relyx Unicem 2). After 6 months cervical, middle, and apical thirds sections of fiber-post space were submitted to push-out testing. To data ANOVA and Tukey's test were employed (α = 5%). RB and CUI showed the lowest presence of residues on dentin surface (p = .015) and the highest bond strength values (p < .001), regardless of the dentin third. CUI presented the highest quantity of open dentinal tubules in middle and apical thirds (p < .001). CI presented the lowest bond strength value of resin cement, regardless of dentin third (p < .001). Mechanical cleaning protocols, such as RB and CUI, presented better surface cleaning capabilities and higher bond strength than CI with dual-cure resin cement employed. The use of a mechanical cleaning protocol seems to cause appropriate condition on the root dentin surface. Mechanical cleaning of root dentin provided greater bond strength of the self-etching system with dual resin cement. Conventional irrigation did not provide adequate root dentin cleaning.

Effect of irrigation protocols on root canal wall after post preparation: a micro-CT and microhardness study

The aim of this study was to investigate the effects of different post space irrigation protocols for removing residual filling material from dentin walls, by using microcomputed tomography (micro-CT), and the influence of these protocols on dentin microhardness. Bovine incisors (n = 35) were filled with the single-cone technique and MTA Fillapex (Angelus, Londrina, PR, Brazil). Post space preparation (PSP) was performed 7 days after filling, using the Odous Touch electrical system (Odous De Deus Ind. e Com., Belo Horizonte, MG, Brazil), followed by post space irrigation using manual irrigation, passive ultrasonic irrigation, or Easy Clean, together with 2.5% sodium hypochlorite (NaOCl), or with 2.5% NaOCl and 17% EDTA (NaOCl/EDTA). Micro-CT scans were performed at three time points. The residual filling material was evaluated at three levels: cervical, middle and apical. The Knoop test was measured with four indentations around the canal lumen at three dentin depths: X (100 μm), Y (200 μm) and Z (400 μm). Statistical analysis was performed using ANOVA (p < 0.05). The effects of the activation method (p < 0.001), and the root level (p = 0.013), as well as the interaction between the irrigant and the activation method (p = 0.041), led to different percentages of residual filling material. Lower amounts of residual filling material were observed at the cervical versus the middle and apical levels (p < 0.05). No significant differences were observed in dentin microhardness (p > 0.05). The best removal of the residual filling material was performed using the Easy Clean tip and NaOCl/EDTA, regardless of the activation methods.

Dentinal Tubule Penetration and Adaptation of Bio-C Sealer and AH-Plus: A Comparative SEM Evaluation

OBJECTIVE

The aim of this study was to compare and evaluate the dentinal tubule penetration and adaptation of a premixed bioceramic sealer and an epoxy-resin based sealer in the three radicular thirds.

METHODS

30 wide roots, with single straight canals and totally formed apexes, were endodontically prepared and divided into two groups (n=14) according to the sealer used for root canal filling: AH-Plus (AHP) and Bio-C Sealer (BIOC). Two samples were left as controls. After the canals were filled, the samples were cut and viewed under Scanning Electron Microscopy by taking images to analyse the tubular penetration and adaptation of the sealers. The results were statistically analysed with the Shapiro Wilk, Levene and Mann-Whitney tests (P<0.05).

RESULTS

BIOC showed significantly higher penetration in dentinal tubules than AHP in the cervical, middle and apical thirds of the root canal (P<0.05) and better adaptation to the dentinal tubule walls.

CONCLUSION

Under the parameters of this study, BIOC exhibits higher penetration and better adaptation to the dentinal tubules compared to AHP.