Malunion of the distal radius

The Role of Bone Grafting in Corrective Osteotomy of Distal Radius Malunions

Background  It remains unclear whether bone grafting is required during corrective osteotomy of the distal radius. The goal of this systematic review is to determine the union, revision, and complication rates of bone grafting techniques associated with extra-articular corrective osteotomy for dorsally malunited distal radius fractures treated with volar plating. Questions  Is bone grafting in distal radius corrective osteotomy associated with increased rates of bone union and reduced rates of revision surgery and complications? Materials and Methods  A comprehensive search of the MEDLINE, Embase, and Cumulative Index to Nursing and Allied Health Literature databases was completed for studies reporting clinical outcomes of extra-articular corrective osteotomy for dorsally malunited distal radius fractures treated with volar plating. Results  A total of 13 studies, with 14 intervention arms and 236 patients, were included. Bone grafting techniques consisted of autograft (6 studies, n  = 93), synthetic bone grafts (2 studies, n  = 38), allograft (1 study, n  = 14), or no grafting (5 studies, n  = 91). The overall union rate was 97%, and the mean time-to-union was 12.0 weeks. Larger corrections of dorsal tilt and ulnar variance were performed in the autograft and allograft groups. Complication and revision rates were highest in the synthetic group, 45 and 26.3% respectively. Conclusion  Grafting in extra-articular corrective osteotomy for dorsally angulated distal radius malunions treated with volar plating is not associated with an improved union rate in the literature. However, larger corrections were achieved in both the autograft and allograft groups compared to the no-graft and synthetic groups, resulting in similar union rates. Synthetic bone grafting was associated with the highest complication and revision rates. Future comparative prospective trials and proper documentation of whether cortical contact was present or absent are required to assess whether bone grafting warrants consideration in more advanced deformities. Level of Evidence  IV.

A review of novel methods to assist digital planning and execution of osteotomy for upper limb deformities

Corrective osteotomy for upper limb deformities caused by fractures, trauma, or degeneration necessitates detailed preoperative planning to ensure accurate anatomical alignment, restore limb length, and correct angular deformities. This review evaluates the effectiveness of a three-dimensional (3D) preoperative planning program and an image fusion system designed for intraoperative guidance during corrective osteotomy procedures. The application processes and clinical outcomes observed with these technologies in various surgical scenarios involving the upper extremities were summarized. The systems proved beneficial in allowing surgeons to visualize surgical steps and optimize implant placement. However, despite these technological advancements, we found no significant impact on clinical outcomes compared to conventional methods. This indicates a need for further enhancements in system efficiency and user-friendliness to significantly improve patient results. Future developments should focus on addressing these limitations to enhance the practical utility of such advanced systems.

3D-printed patient-specific implants made of polylactide (PLDLLA) and β-tricalcium phosphate (β-TCP) for corrective osteotomies of the distal radius

The most common surgical procedure to manage the malunion of the bones is corrective osteotomy. The current gold standard for securing the bone segments after osteotomy is the use of titanium plates and allografts which have disadvantages such as possible allergic reaction, additional operations such as extraction of the graft from other sites and removal operation. The utilization of resorbable materials presents an opportunity to mitigate these drawbacks but has not yet been thoroughly researched in the literature. This study assesses the viability of using biodegradable, 3D-printed patient-specific implants made of Poly(-L-lactide-co-D, L-lactide) (PLDLLA) and β-Tricalcium Phosphate (β-TCP) as an alternative material in an in-vitro biomechanical study involving ex vivo biomechanical compression testing, biodegradation testing, and calorimetric measurements. These implants possess a unique shape, resembling a wedge and are fixated as a connection between the osteotomised bone using resorbable screws. Following point-of-care virtual planning, bio-mechanical compressive tests with (n = 5) ex vivo radii equipped with PLDLLA/ β-TCP implants were performed to prove sufficient stability of the connection. All PLDLLA/ β-TCP implants withstood a compressive force of at least 1'211 N which exceeds the maximum force reported in literature in case of a fall from the height of one meter. Furthermore, the results showed a consistent surface chemistry and slow degradation rate. The outcomes are encouraging, establishing the groundwork for an innovative distal radius corrective osteotomy surgical method. However, further research is necessary to thoroughly evaluate the long-term biodegradability and mechanical efficacy of the implants.

Validation of the Lift-Off Screw Technique in Patients Undergoing Corrective Osteotomy for Malunited Distal Radius Fractures

PURPOSE

The purpose of this study was to validate the clinical accuracy of the lift-off screw (LOS) technique for volar tilt correction (VTC) in patients undergoing corrective osteotomy for dorsally angulated distal radius fracture malunions.

METHODS

We conducted a retrospective review of 23 patients with dorsally angulated distal radius fracture malunions treated with corrective osteotomy using the LOS technique. The LOS equation Ls = [tan(Tc) ∗ Lp + C]/[cos(⍬s)] and standardized intraoperative fluoroscopic images were used to determine and compare the calculated and clinical VTC and final volar tilt. Correlations between the LOS length and the clinical VTC were calculated, as well as between the desired VTC and the correction accuracy.

RESULTS

Preoperative volar tilt ranged from -6° to -50° (mean = -22.9° ± 10.6°). The calculated VTC was 32.7° ± 9.4°, and the clinical VTC achieved was 25.8° ± 9.3°. The difference between the clinical and calculated correction was -6.9°, with an average postoperative clinical volar tilt of 2.8° ± 5.7°, compared with a calculated volar tilt of 9.7° ± 4.4°. There was a moderately strong positive correlation between LOS screw length and clinical VTC achieved, and a moderately weak negative correlation between the desired amount of correction and the accuracy of the correction.

CONCLUSIONS

The LOS technique is a reproducible method to plan the amount of sagittal plane correction during corrective osteotomy surgery for dorsally angulated distal radius fracture malunions. We demonstrate that this technique underestimates the clinical correction achieved by an average of 7°, with larger deformities experiencing greater undercorrection. Undercorrection of volar tilt during corrective osteotomy should be anticipated by surgeons and considered in future implant and cutting guide designs.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

What Surgical Technique to Perform for Isolated Ulnar Shortening Osteotomy After Distal Radius Malunion: A Systematic Review

BACKGROUND

Unstable fractures of the distal radius fractures (DRFs) may result in malunion, usually consisting of subsequent shortening and angular deviations. Ulnar shortening osteotomy (USO) is assumed to be a simpler procedure than radial correction osteotomy, resulting in fewer complications and comparable outcomes. The aim of this study was to identify the best surgical technique to perform USO to restore distal radioulnar joint congruency after DRF malunion.

METHODS

A systematic review of the literature is performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis guidelines in February 2022 to identify studies reporting outcomes and surgical technique for isolated USO. The primary outcome was complication rates. Secondary outcomes included functional, radiologic, and patient-rated outcomes. The methodological index for nonrandomized studies criteria were used to assess the quality of evidence.

RESULTS

Included were 12 cohorts (185 participants). Due to substantial heterogeneity, a meta-analysis could not be performed. The overall complication rate was 33% (95% confidence interval, 16% to 51%). The most reported complication was implant irritation (22%), often requiring removal of the implant (13%). Only 3% nonunions were mentioned. Functional and patient-rated outcomes improved in most patients after USO. Quality of evidence of the papers was low to very low. Common methodological flaws were related to retrospective research.

CONCLUSION

No evident differences in complication rates and functional outcomes between the surgical techniques were observed. Based on this literature, most complications are related to implant irritation. Nonunion and infection rates were rare. Therefore, a surgical technique with a buried implant might be preferred. This hypothesis requires further investigation.

It is safe to use the ulnar length difference to correct the radial length difference in the 3D-planning process of a radius osteotomy in patients with a distal radius malunion

BACKGROUND

A corrective radius osteotomy is often performed in patients with a symptomatic distal radius malunion. In 3D-planned osteotomies, the unaffected radius is mirrored over the malunited radius after adjusting for left-right length differences using both ulnae. This approach assumes that ulnar length differences in a malunion population are similar to those in a healthy population. This study was conducted to analyze the difference in ulnar length in a distal radius malunion population and to assess the potential influence of age, sex, or malunion side on this difference.

METHODS

We evaluated 65 adult patients with distal radius malunion using bilateral forearm CT scans. 3D models of both ulnae were constructed, and length differences were determined along a standardized length axis. The results were compared to two populations without a radius malunion.

RESULTS

The average absolute ulnar length difference was 2.57 mm (SD 1.81), which was comparable to the two healthy populations. This difference was not significantly affected by age, sex, or malunion side.

CONCLUSION

This study demonstrated that using the ulnar length difference to correct for radial length difference in the current 3D planning process, before using the contralateral radius as a template for a corrective osteotomy in patients with radius malunion, is safe.

Functional outcome of 2-D- and 3-D-guided corrective forearm osteotomies: a systematic review

We performed a systematic review to compare conventional (2-D) versus 3-D-guided corrective osteotomies regarding intraoperative results, patient-reported outcome measures, range of motion, incidence of complications and pain score. PubMed (MEDLINE), Embase and Cochrane CENTRAL were searched, and 53 articles were included, reporting 1257 patients undergoing forearm corrective osteotomies between 2010 and 2022. 3-D-guided surgery resulted in a greater improvement in median Disabilities of the Arm, Shoulder and Hand (DASH) score (28, SD 7 vs. 35, SD 5) and fewer complications (12% vs. 6%). Pain scores and range of motion were similar between 3-D-guided and conventional surgery. 3-D-guided corrective osteotomy surgery appears to improve patient-reported outcomes and reduce complications compared to conventional methods. However, due to the limited number of comparative studies and the heterogeneity of the studies, a large randomized controlled trial is needed to draw definitive conclusions.Level of evidence: III.

The Volar Cortical Hinge: An Independent Risk Factor for Distal Radius Fracture Displacement

Background  Displaced distal radius fractures are prone to redisplacement after manipulation. This can result in the need for delayed surgery. Several criteria have been studied to predict the likelihood of redisplacement. We hypothesized that reduction in the volar cortex would be an additional predictive factor. Purpose  The aim of this study was to assess whether the quality of the volar cortex reduction predicts the subsequent need for further intervention (surgery or remanipulation). As a secondary outcome, we assessed whether the quality of the reduction predicts the rate of malunion. Methods  A retrospective review was performed of displaced adult distal radius fractures over a 2-year period that had undergone closed reduction at presentation. We identified 105 patients and a review of their electronic notes and radiographs was then performed. The volar cortex reduction was defined as "anatomical," "opposed," or "displaced." We assessed the radial height, radial inclination, radial/ulnar translation, volar/dorsal angulation, teardrop angle, presence of dorsal comminution, quality of the cast (molding, cast index), and volar cortex reduction. These measurements were taken at five time points (prereduction, postreduction, 1 week, 2 weeks, and 6 weeks). All patients that subsequently required surgical fixation or repeat reduction were identified as the primary outcome measure. The 6-week radiographs were assessed for radiographic malunion as our secondary outcome measure. A statistical analysis was then performed to assess the factors that influenced a loss of position and the need for delayed surgical intervention. Results  Of the 105 patients, 22 patients required delayed surgery, 3 patients underwent a repeat manipulation, and 12 patients had a radiographic malunion at 6 weeks. During the study period, the proportion of patients requiring surgery or repeat manipulation in the displaced group was 10/21 (47.6%), in the opposed group it was 11/50 (23.4%), and in the anatomic group it was 4/36 (11.1%; p  = 0.008). We then included the patients with a radiographic malunion and found the proportion of patients with an adverse outcome in the displaced group was 14/21 (66.7%), in the opposed group it was 17/47 (36.2%), and in the anatomic group it was 6/36 (16.7%; p  = 0.001). At the 1-week time point, this association was equally significant, as the proportion in the displaced group was 17/33 (51.5%), in the opposed group it was 15/45 (33.3%) and in the anatomic group it was 1/22 (4.5%; p  = 0.001). The patients' age, quality of cast, presence of dorsal comminution, and degree of initial displacement did not predict the subsequent need for surgery or remanipulation. Conclusion  The most important factor in our study for significant redisplacement of an initially dorsally displaced distal radius fracture is the association of the volar cortex. This parameter maintains significance at the 1-week time point. This data shows that volar cortex reduction is a useful clinical measurement in assessing which distal radius fractures will undergo delayed displacement requiring intervention. Level of evidence  Level 3-Retrospective comparative study.

A comparison of 3-D CT and 2-D plain radiograph measurements of the wrist in extra-articular malunited fractures of the distal radius

Two-dimensional (2-D) plain radiographs may be insufficient for the evaluation of distal radial malunion, as it is a three-dimensional (3-D) deformity. This study introduced a 3-D measuring method that outputs radial inclination, ulnar variance, palmar tilt and axial rotation. To this end, a standardized and clearly defined coordinate system was constructed that allowed 3-D measurements closely resembling the conventional 2-D method in 35 patients. Mean differences between 3-D and 2-D measurements in affected wrists were 1.8° for radial inclination, 0.8 mm for ulnar variance and 3.7° for palmar tilt. In addition, inter- and intra-observer reproducibility of all 3-D and 2-D measurements were good or excellent (intraclass correlation coefficient >0.75), with 3-D reproducibility always better than 2-D. Axial rotation was present in all patients with a mean of 7.9° (SD 6.9). Although the differences between 2-D and 3-D measurements were small, 3-D evaluation enables the assessment of axial rotation and brings us closer to a routine 3-D evaluation of malunion.Level of evidence: III.

Corrective osteotomy of the distal radius with palmar locking plate osteosynthesis without bone grafting and without cortical contact

The aim of this study was to assess bone healing and secondary fracture displacement after corrective osteotomy of the distal radius without any cortical contact using palmar locking plates without bone grafting. Between 2009 and 2021, 11 palmar corrective osteotomies of extra-articular malunited distal radius fractures and palmar plate fixations without the use of bone grafts and without cortical contact, were assessed. All patients showed complete osseous restoration and significant improvement in all radiographic parameters. Except for one patient, there were no secondary dislocations or loss of reduction in the postoperative follow-up. Bone grafts may not be mandatory for bone healing and prevention of secondary fracture displacement after palmar corrective osteotomy without cortical contact and fixation with palmar locking plate.Level of evidence: IV.

Managing the Extra-Articular Distal Radius Malunion

Distal radius fractures are common injuries. Satisfactory outcomes are typically achieved with appropriate nonoperative or operative treatment. A proportion of these injuries develop symptomatic malunions, which may be treated surgically with distal radius corrective osteotomy. A thorough understanding of the anatomy, biomechanics, radiographic parameters, and indications is needed to provide appropriate treatment. Factors, including surgical approach, osteotomy type, use of bone graft, fixation construct, management of associated tendon and/or nerve conditions, soft tissue contracture releases, and need for ulnar-sided procedures, should be considered. A comprehensive evaluation is necessary to guide understanding for when salvage procedures may be preferred.

Restoring Wrist Harmony: A Case Report of Ulnar Osteotomy for Correcting the Radius Malunion

A 41-year-old female patient sought medical attention due to a malunited distal radius fracture with a positive ulnar variance, experiencing wrist pain and limited range of motion. The patient was successfully treated with an isolated ulnar osteotomy and bone grafting, resulting in significant alleviation of symptoms and improved wrist mobility. Various surgical methods have been proposed to address malunited radius fractures, and ulnar osteotomy has shown promise as an effective technique for such cases.

Carpal Joint Malalignment With Distal Radius Malunion and Factors in Correction After Distal Radius Osteotomy

Purpose

There is a paucity of data regarding recommendations on when to correct for distal radius malunions and if the initial severity of the radiographic outcomes is correlated with the ability to correct to baseline. We evaluated the effects of distal radius corrective osteotomy on preoperative carpal joint malalignment resulting from distal radius malunions, correlated injury severity and osteotomy timing to radiographic outcomes, and developed a straightforward classification system for predicting radiocarpal and midcarpal maladaptive patterns.

Methods

A retrospective review included 26 patients (27 wrists) who reported initial closed treatment for a distal radius fracture and who subsequently underwent a corrective osteotomy for malunion. Data included patient demographics, range of motion, preoperative fracture deformity, fracture deformity correction, and preoperative and postoperative radiographic measurements of the radiocarpal and midcarpal alignment patterns.

Results

Of 27 dorsally angulated malunions, 16 were classified as type 1 midcarpal adaptation and 11 as type 2 radiocarpal adaptation. The midcarpal group showed significant improvements in distal radius and carpal alignment parameters after surgery, except for the ulnar variance. The radiocarpal group showed significant improvements in distal radius and carpal alignment parameters, except for the radiolunate angle, radioscaphoid angle, and capitolunate angle. The radiocarpal group exhibited an overall decrease in range of motion compared with that of the midcarpal group. Severity of the fracture and time taken from injury to corrective osteotomy correlated with the ability to correct carpal radiographic parameters in dorsally angulated malunions of the distal radius, especially beyond 40 weeks.

Conclusions

The severity of the initial fracture and time taken from injury to corrective osteotomy correlate with the ability to correct radiographic parameters in dorsally angulated malunions of the distal radius. Early correction of distal radius malunions is recommended, especially in radiocarpal malalignment patterns. A useful analysis for predicting midcarpal and radiocarpal adaptation patterns is the direct measurement of the distal articular surface of the radius to the lunate, termed the relative-radiolunate angle.

Type of study/level of evidence

Therapeutic IV.

Effect of uncertain clinical conditions on the early healing and stability of distal radius fractures

BACKGROUND AND OBJECTIVES

The healing outcomes of distal radius fracture (DRF) treated with the volar locking plate (VLP) depend on surgical strategies and postoperative rehabilitation. However, the accurate prediction of healing outcomes is challenging due to a range of certainties related to the clinical conditions of DRF patients, including fracture geometry, fixation configuration, and physiological loading. The purpose of this study is to investigate the influence of uncertainty and variability in fracture/fixation parameters on the mechano-biology and biomechanical stability of DRF, using a probabilistic numerical approach based on the results from a series of experimental tests performed in this study.

METHODS

Six composite radius sawboneses fitted with titanium VLP (VLP 2.0, Austofix) were loaded to failure at a rate of 2 N/s. The testing results of the elastic and plastic behaviour of the VLP were used as inputs for a probabilistic-based computational model of DRF, which simulated mechano-regulated tissue differentiation and fixation elastic capacity at the fracture site. Finally, the probability of success in early indirect healing and fracture stabilisation was predicted.

RESULTS

The titanium VLP is a strong and ductile fixation whose flexibility and elastic capacity are governed by flexion working length and bone-to-plate distance, respectively. A fixation with optimised designs and configurations is critical to mechanically stabilising the early fracture site. Importantly, the uncertainty and variability in fracture/fixation parameters could compromise early DRF healing. The physiological loading uncertainty is the most adverse factor, followed by the negative impact of uncertainty in fracture geometry.

CONCLUSIONS

The VRP 2.0 fixation made of grade II titanium is a desirable fixation that is strong enough to resist irreparable deformation during early recovery and is also ductile to deform plastically without implant failure at late rehabilitation.

Wrist Arthritis and Arthrodesis: Preserving Function, Minimizing Problems

Wrist arthritis is a common condition with numerous causes and presentations. Several management options exist, and treatment should be individualized based on patient age, comorbidities, occupation, duration of symptoms, and failed treatment modalities. Arthroscopy and denervation are appealing because of shorter recovery time and preservation of motion, but duration of effectiveness varies between patients. Patients who fail these smaller procedures or those with pancarpal arthrosis are treated effectively with total wrist arthrodesis or total wrist arthroplasty in lower-demand patients. This article reviews causes and patterns of wrist arthritis and discusses treatment strategies aimed at preserving function and minimizing complications.

Clinical Features and Surgical Strategies of Distal Radius Posttraumatic Deformity

Objective

To investigate the clinical features and surgical strategies of distal radius posttraumatic deformity.

Methods

A retrospective analysis was performed on the data of 30 patients with distal radius posttraumatic deformity treated by osteotomy and orthopedic surgery in the department of orthopedics, the First Affiliated Hospital of Nanjing Medical University, from February 2016 to November 2018. All the patients underwent preoperative anterior and lateral X-ray plain scanning of bilateral wrist joints, showing different degrees of radius shortening, inferior ulnar and radial mismatch, palmar angle, and ulnar deviation angle, among which 11 patients had an uneven joint surface. After a full evaluation, osteotomy and orthopedic surgery were performed to restore the original anatomical structure, plaster fixation was performed for two weeks after surgery, and regular outpatient follow-up was conducted. The function of the wrist was evaluated by the MMWS (wrist joint improvement) scoring scale before and after surgery, and the changes in the wrist joint-related treatment parameters were evaluated according to X-ray.

Results

All 30 patients had no neurological symptoms after surgery, and all wounds healed within the first stage. All patients were followed up for 6–12 months, with an average healing time of 3.5 months. There was no reduction loss, internal fixation loosening, or fracture in the regular postoperative review. Postoperative MMWS (wrist joint improvement) score scale data were significantly higher than those before surgery, and there were differences between groups (P < 0.05). Postoperative treatment parameters of wrist joints such as palmar inclination angle, ulnar deviation angle, radius height, and lower ulnar and radial matching were significantly improved, and there were differences between groups (P < 0.05).

Conclusions

The patients with distal radius posttraumatic deformity have the clinical characteristics of shortening of radius, mismatch of lower ulnar and radius, an abnormal inclination of palm, and ulnar declination. For patients with distal radius posttraumatic deformity, osteotomy and orthopedic surgery can effectively improve wrist function and improve patients' quality of life, which is worthy of clinical reference.

Z-Corrective Osteotomy in Malunited Extra-Articular Fractures of Distal Radius

PURPOSE

We sought to assess clinical, radiological, and functional outcomes following treatment of extra-articular malunions of the distal radius using a multiplanar z-corrective osteotomy.

METHODS

Fifteen patients with extra-articular distal radius malunions (13 dorsal and 2 volar) underwent z-corrective osteotomy and volar plate fixation without bone grafting. Correction and maintenance of each deformity was evaluated in terms of various radiographic indices (radial height; volar and radial tilt); osteotomy union; pain (visual analog scale); grip strength; range of motion; Disabilities of the Arm, Shoulder, and Hand scores; and Mayo wrist scores.

RESULTS

The mean follow-up was 16.4 months. The mean radial height was corrected from -1.3 mm to 4.9 mm. The mean ulnar variance improved from 4.3 mm to -0.4 mm. The sagittal radial tilt and radial inclination were restored from a mean of -17.9° (dorsal) to 3.3° (volar) and from 12.0° to 17.2°, respectively. The Disabilities of the Arm, Shoulder, and Hand and Mayo wrist scores improved from means of 36 and 56 preoperatively to 24.8 and 73.3, respectively, at 6 months and further to 20.6 and 77.6, respectively, at the last follow-up. There were no nonunions or tendon-related problems. The mean pain score decreased from 4.1 preoperatively to 1.0 at 6 months and 0.8 at the last follow-up. The mean grip strength improved from 5.6 kg preoperatively to 15.6 kg at 6 months and 19.7 kg at the last follow-up. There was a statistically significant improvement in range of motion at the wrist.

CONCLUSIONS

The z-osteotomy provides correction of deformity in all 3 planes, along with restoration of radial height. It also maintains a broad area of bone contact between the 2 osteotomized bone fragments, facilitating bony union and eliminating the need for bone grafting.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

Influence of therapeutic grip exercises induced loading rates in distal radius fracture healing with volar locking plate fixation

BACKGROUND AND OBJECTIVE

Therapeutic exercises could potentially enhance the healing of distal radius fractures (DRFs) treated with volar locking plate (VLP). However, the healing outcomes are highly dependant on the patient-specific fracture geometries (e.g., gap size) and the loading conditions at the fracture site (e.g., loading frequency) resulted from different types of therapeutic exercises. The purpose of this study is to investigate the effects of different loading frequencies induced by therapeutic exercises on the biomechanical microenvironment of the fracture site and the transport of cells and growth factors within the fracture callus, ultimately the healing outcomes. This is achieved through numerical modelling and mechanical testing.

METHODS

Five radius sawbones specimens (Pacific Research Laboratories, Vashon, USA) fixed with VLP (VRP2.0+, Austofix) were mechanically tested using dynamic test instrument (INSTRON E3000, Norwood, MA). The loading protocol used in mechanical testing involved a series of cyclic axial compression tests representing hand and finger therapeutic exercises. The relationship between the dynamic loading rate (i.e., loading frequency) and dynamic stiffness of the construct was established and used as inputs to a developed numerical model for studying the dynamic loading induced cells and growth factors in fracture site and biomechanical stimuli required for healing.

RESULTS

There is a strong positive linear relationship between the loading rate and axial stiffness of the construct fixed with VLP. The loading rates induced by the moderate frequencies (i.e., 1-2 Hz) could promote endochondral ossification, whereas relatively high loading frequencies (i.e., over 3 Hz) may hinder the healing outcomes or lead to non-union. In addition, a dynamic loading frequency of 2 Hz in combination of a fracture gap size of 3 mm could produce a better healing outcome by enhancing the transport of cells and growth factors at the fracture site in comparison to free diffusion (i.e. without loading), and thereby produces a biomechanical microenvironment which is favourable for healing.

CONCLUSION

The experimentally validated numerical model presented in this study could potentially contribute to the design of effective patient-specific therapeutic exercises for better healing outcomes. Importantly, the model results demonstrate that therapeutic grip exercises induced dynamic loading could produce a better biomechanical microenvironment for healing without compromising the mechanical stability of the overall volar locking plate fixation construct.

Clinical, functional and radiological outcomes of the use of fixed angle volar locking plates in corrective distal radius osteotomy for fracture malunion

BACKGROUND AND AIM

Fractures of the distal radius are a common injury and mal-union can occur in those managed non-operatively. This can cause significant functional limitations along with pain. A corrective osteotomy with the use of a volar locking plate aims to restore articular surface congruency and improve outcomes. We present our local experience with clinical, functional and radiological outcomes of corrective osteotomy using a fixed angle volar locking plate and bone graft for management of distal radius mal-union.

METHODS

Retrospective study. All adult patients. Both pre and post operatively clinical range of motion was recorded. Post operative PROMS was measure by DASH, MAYO and SF-12 and pain by means of a VAS measured from 0-10. Mean follow up period was at 15 months.

RESULTS

32 patients underwent the studied procedure. 24F-8F. Mean age: 56. Radiological union of corrective osteotomy: 28 (88%) of patients. 4 patients required further operative treatment to achieve corrective union. No other reported complications post-op. Post-operatively flexion improved by 24 and extension 20. Pronation was improved by 24 and supination 22. Pain was improved from an average VAS pre-operative of 5.6 to 1.6 post-operatively. Mean DASH scored improved from 57.8 to 16.2 post-operatively and MAYO 38.5 to 58.6. The mean post-operative SF-12 score was 46.2 from 31.

CONCLUSIONS

In this series of 32 patients (the biggest reported in the literature in our knowledge) a  corrective osteotomy with fixed-angle volar locking plate for mal-united distal radius has shown to improve both clinical-radiological and patient reported outcomes and provide good results of the very few complications' treatments.

An image fusion system for corrective osteotomy of distal radius malunion

Background

To provide surgical support for corrective osteotomy, we developed an image fusion system for three-dimensional (3D) preoperative planning and fluoroscopy. To assess the utility of this image fusion system, we evaluated the reproducibility of preoperative planning for corrective osteotomy of dorsally angulated distal radius malunion using the system and compared reproducibility without using the system.

Methods

Ten wrists from 10 distal radius malunion patients who underwent corrective osteotomy were evaluated. 3D preoperative planning and the image fusion system were used for the image fusion group (n = 5). Only 3D preoperative planning was used for the control group (n = 5). 3D preoperative planning was performed for both groups in order to assess reduction, placement, and the choice of implants. In the image fusion group, the outline of the planned image was displayed on a monitor and overlapped with fluoroscopy images during surgery. Reproducibility was evaluated using preoperative plan and postoperative 3D images. Images were compared with the 3D coordinates of the radial styloid process (1), the volar and dorsal edges of the sigmoid notch (2) (3), and the barycentric coordinates of the three reference points. The reproducibility of the preoperative plan was evaluated by the distance of the coordinates between the plan and postoperative images for the reference points.

Results

The distances between preoperative planning and postoperative reduction in the image fusion group were 2.1 ± 1.1 mm, 1.8 ± 0.7 mm, 1.9 ± 0.9 mm, and 1.4 ± 0.7 mm for reference points (1), (2), (3), and the barycenter, respectively. The distances between preoperative planning and postoperative reduction in the control group were 3.7 ± 1.0 mm, 2.8 ± 2.0 mm, 1.7 ± 0.8 mm, and 1.8 ± 1.2 mm for reference points (1), (2), (3), and the barycenter, respectively. The difference in reference point (1) was significantly smaller in the image fusion group than in the control group (P < 0.05).

Conclusion

Corrective osteotomy using an image fusion system will become a new surgical support method for fracture malunion.

Trial registration Registered as NCT03764501 at ClinicalTrials.gov.

Daily life one year after corrective osteotomy for malunion of a distal radius fracture an interview study

The aim of this study was to explore the everyday life experiences of people one year after corrective osteotomy following a symptomatic, malunited, distal radius fracture.Semi-structured interviews were conducted with twenty respondents, median age 65 (22-81) years. The respondents were recruited consecutively. The interviews were subjected to qualitative content analysis. Three authors took part in the analysis.The result is presented as one theme, 'Daily life works again' with five categories: Relief of inconveniences and symptoms, Managing new symptoms and complications, Regaining abilities, Normalised social relationships, Increased wellbeing. The symptoms had declined in severity, some participants regarded themselves as fully restored and used their hand again without hesitation. Others were still bothered by their wrist occasionally and a few had to manage complications. The participants had regained the ability to perform many everyday life activities and reported increased independence and less irritation between spouses, as well as increased wellbeing.One year after a corrective osteotomy following malunion of a distal radius fracture, the patients' experiences represent a continuum. Some are still restricted by their wrist occasionally, the majority experience an increased ease in their performance of activities of daily life and some regard themselves as fully restored. The recovery has a positive impact on social relationships and the patients' wellbeing.

A 3D printed cast for minimally invasive transfer of distal radius osteotomy: a cadaver study

Purpose

In corrective osteotomy of the distal radius, patient-specific 3D printed surgical guides or optical navigation systems are often used to navigate the surgical saw. The purpose of this cadaver study is to present and evaluate a novel cast-based guiding system to transfer the virtually planned corrective osteotomy of the distal radius.

Methods

We developed a cast-based guiding system composed of a cast featuring two drilling slots as well as an external cutting guide that was used to orient the surgical saw for osteotomy in the preoperatively planned position. The device was tested on five cadaver specimens with different body fat percentages. A repositioning experiment was performed to assess the precision of replacing an arm in the cast. Accuracy and precision of drilling and cutting using the proposed cast-based guiding system were evaluated using the same five cadaver arms. CT imaging was used to quantify the positioning errors in 3D.

Results

For normal-weight cadavers, the resulting total translation and rotation repositioning errors were ± 2 mm and ± 2°. Across the five performed surgeries, the median accuracy and Inter Quartile Ranges (IQR) of pre-operatively planned drilling trajectories were 4.3° (IQR = 2.4°) and 3.1 mm (IQR = 4.9 mm). Median rotational and translational errors in transferring the pre-operatively planned osteotomy plane were and 3.9° (IQR = 4.5°) and 2.6 mm (IQR = 4.2 mm), respectively.

Conclusion

For normal weight arm specimens, navigation of corrective osteotomy via a cast-based guide resulted in transfer errors comparable to those using invasive surgical guides. The promising positioning capabilities justify further investigating whether the method could ultimately be used in a clinical setting, which could especially be of interest when used with less invasive osteosynthesis material.

Patient-reported outcomes after corrective osteotomy for a symptomatic malunion of the distal radius

AIMS

The primary aim of this study was to describe patient satisfaction and health-related quality of life (HRQoL) following corrective osteotomy for a symptomatic malunion of the distal radius.

METHODS

We retrospectively identified 122 adult patients from a single centre over an eight-year period who had undergone corrective osteotomy for a symptomatic malunion of the distal radius. The primary long-term outcome was the Patient-Rated Wrist Evaluation (PRWE) score. Secondary outcomes included the Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) score, the EQ-5D-5L score, complications, and the Net Promoter Score (NPS). Multivariate regression analysis was used to determine factors associated with the PRWE score.

RESULTS

Long-term outcomes were available for 89 patients (72%). The mean age was 57 years (SD 15) and 68 were female (76%). The median time from injury to corrective osteotomy was nine months (interquartile range (IQR) 6 to 13). At a mean follow-up of six years (1 to 11) the median PRWE score was 22 (IQR 7 to 40), the median QuickDASH score was 11.4 (IQR 2.3 to 31.8), and the median EQ-5D-5L score was 0.84 (IQR 0.69 to 1). The NPS was 69. Multivariate regression analysis showed that the presence of an associated ulnar styloid fracture was the only significant independent factor associated with a worse PRWE score when adjusting for confounding variables (p = 0.004).

CONCLUSION

We found that corrective osteotomy for malunion of the distal radius can result in good functional outcomes and high levels of patient satisfaction. However, the presence of an ulnar styloid fracture may adversely affect function. Level of Evidence: III (cohort study). Cite this article: Bone Joint J 2020;102-B(11):1542-1548.

Habitual volar dislocation of the ulnar head with a locked distal radioulnar joint after distal radius fracture: A case report

RATIONALE

Habitual volar dislocation of the ulnar head with a locked distal radioulnar joint (DRUJ) is a rare complication after distal radius fracture. We present a case of habitual volar dislocation of the ulnar head in a woman with a dorsally displaced malunited distal radius fracture.

PATIENT CONCERNS

A 72-year-old woman presented with occasional painful locking of the forearm in full supination. She had fractured the left distal radius in a fall 6 months previously. The fracture had been treated non-surgically with wrist immobilization in a long and short arm cast for 6 weeks. Physical examination showed no swelling of the left hand. The wrist locked when the forearm was fully supinated, and the patient was not able to pronate her forearm without reducing the ulna by pressing the left ulna down toward the DRUJ. She experienced sharp pain during the reduction procedure and pronation of the left forearm. The affected wrist had 91% motion compared with the contralateral wrist.

DIAGNOSIS

Radiography and computed tomography showed 28° dorsally angulated malunion of the distal radius and ulnar head subluxation with respect to the radius. Magnetic resonance imaging revealed disruption of the ulnar-side triangular fibrocartilage complex (TFCC) from the ulna fovea.

INTERVENTIONS

The patient desired surgery to address the painful click during full supination of her left wrist and the limitations in her activities of daily living. Corrective osteotomy of the distal radius and arthroscopic repair of the ulnar-side tear of the TFCC were performed. The TFCC was arthroscopically repaired to the ulnar fovea to stabilize the DRUJ.

OUTCOMES

At 1 year postoperatively, radiography showed complete union of the radius. The affected side had 97% wrist motion compared with the contralateral wrist and a full range of forearm rotation without pain or clicking. The grasp strength was 100% compared with the normal wrist.

LESSONS

Malunited distal radius fracture with concomitant TFCC injury can result in habitual volar dislocation of the ulnar head due to severely dorsally angulated malunion of the radius and avulsion of the ulnar-side TFCC from the ulna fovea. This condition required corrective osteotomy plus TFCC repair.

Functional outcome after corrective osteotomy for malunion of the distal radius: a randomised, controlled, double-blind trial

Purpose

The purpose of this randomised, controlled, double-blind trial was to evaluate functional outcome during the first year after corrective osteotomy for malunited distal radius fractures, with or without filling the osteotomy void.

Method

Patients were randomised to receive a HydroSet bone substitute or no graft. Cortical contact was maintained and stabilisation of the osteotomy was carried out with a DiPhos R- or RM Plate. To evaluate subjective functional outcome, the Patient-Rated Wrist Evaluation (PRWE), the Quick Disabilities of the Arm, Shoulder and Hand Questionnaire (Q-DASH), the Canadian Occupational Performance Measure (COPM) and the RAND-36 were used. Moreover, range of motion and grip strength were measured by blinded evaluators. Evaluations were made pre-operatively and three, six and 12 months post-operatively.

Results

There were no significant differences between the groups at any time point post-operatively with respect to any of the PROMs that were used or range of motion or grip strength (p > 0.05). In both groups, there was a significant improvement at the 12-month follow-up compared with pre-operatively for the PRWE, the Q-DASH and the COPM satisfaction scores. The RAND-36 revealed no significant differences except for two domains, in which there was an improvement in the treatment group (p < 0.05). For grip strength and for range of motion in all movement directions, except dorsal extension, there was a significant improvement in both groups (p < 0.05).

Conclusion

There is no significant difference in functional outcome during the first year after corrective open-wedge distal radius osteotomy, where cortical contact is maintained, regardless of whether or not bone substitute to fill the void is used.

Distal Radius Malunion

Malunion remains the most common complication of nonsurgical treatment of fractures of the distal radius and represents a common clinical entity. Symptomatic treatment often involves corrective osteotomy. Surgical correction is a challenging problem with unpredictable clinical outcomes. Prevention of malunion of a distal radius fracture is the best course of action. With maintenance of volar cortical contact and the use of volar fixed-angle devices, bone grafting may not be necessary in certain cases of malunion correction. New technologies such as 3-dimensional modeling and computer-generated osteotomy guides are likely to have a positive impact on the outcomes of surgical treatment.

Functional Outcomes after Corrective Osteotomy of Symptomatic Distal Radius Malunions in Children

Background  Closed reduction and cast immobilization of displaced distal radius fractures carries the risk of secondary displacement, which could result in a symptomatic malunion. In patients with a symptomatic malunion, a corrective osteotomy can be performed to improve pain and functional impairment of the wrist joint. Objective  The aim of this study was to assess the functional outcomes of children who underwent a corrective osteotomy due to a symptomatic malunion of the distal radius. Methods  Between 2009 and 2016, all consecutive corrective osteotomies of the distal radius of patients younger than 18 years were reviewed. The primary outcome was functional outcome assessed with the ABILHAND-Kids score. Secondary outcomes were QuickDASH (Quick Disabilities of Arm, Shoulder, and Hand) score, range of motion, complications, and radiological outcomes. Results  A total of 13 patients with a median age of 13 years (interquartile range [IQR]: 12.5-16) were included. The median time to follow-up was 31 months (IQR: 26-51). The median ABILHAND-Kids score was 42 (range: 37-42), and the median QuickDASH was 0 (range: 0-39). Range of motion did not differ significantly between the injured and the uninjured sides for all parameters. One patient had a nonunion requiring additional operative treatment. The postoperative radiological parameters showed an improvement of radial inclination, radial height, ulnar variance, dorsal tilt, and dorsal tilt. Conclusion  Corrective osteotomy for children is an effective method for treating symptomatic malunions of the distal radius. Level of Evidence  This is a Level IV study.

Outcomes and Complications Following Volar and Dorsal Osteotomy for Symptomatic Distal Radius Malunions: A Comparative Study

PURPOSE

To compare patient-reported outcomes, functional outcomes, radiographic alignment, and complications of volar versus dorsal corrective osteotomies as the treatment for symptomatic distal radius malunions.

METHODS

We performed a retrospective review of all patients who underwent a distal radius corrective osteotomy with either a volar or dorsal approach and plating at 1 of 3 institutions between 2005 and 2017. Demographic data, type of surgical treatment, and radiographs were examined. Outcomes were Quick-Disabilities of the Arm, Shoulder, and Hand (QuickDASH) function scores and radius union scoring system as well as major and minor complications.

RESULTS

We included 53 cases (37 volar osteotomies and 16 dorsal osteotomies). Postoperative follow-up from the time of surgery to last QuickDASH score was 84.6 months (range, 12-169.4 months). Compared with the dorsal osteotomy group, the volar osteotomy group demonstrated a better postoperative flexion-extension arc (94.9° vs 72.9°, respectively), pronation-supination arc (146.2° vs 124.9°, respectively), and last QuickDASH scores (6.65 vs 12.87), respectively. Radiographically, there was no difference noted in radial height, radial inclination, or volar tilt in the immediate postoperative and last radiographs. There was a higher rate of complications in the dorsal osteotomy group (8 cases [50% of patients]) compared with the volar osteotomy group (7 cases [18.9% of patients]), including a higher rate of hardware removal.

CONCLUSIONS

For patients with symptomatic malunions of the distal radius, the volar and dorsal approaches both resulted in improvement in QuickDASH scores and range of motion. Volar plating resulted in slightly better QuickDASH scores and fewer complications compared with dorsal plating.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

Incidence of Corrective Procedures After Nonoperatively Managed Distal Radius Fractures in the Elderly

Although the majority distal radius fractures in the elderly are initially managed nonoperatively, the true incidence of subsequent corrective surgery is unknown. The purpose of this study was to determine the incidence and predictors of corrective surgery after conservative management.

Methods

ICD-9 and Current Procedural Terminology codes were queried from the Medicare 5% sample to select patients aged 65 years and older undergoing nonsurgical treatment of distal radius fractures with a minimum 5-year follow-up. Rates of subsequent ipsilateral wrist surgery were correlated against patient age, sex, geographic region, and initial closed reduction.

Results

Five thousand eighty patients with a mean age of 78.3 years were included. Fifty-five patients (1.1%) had undergone subsequent wrist surgery at a median time of 182 days after injury. The youngest cohort (65 to 69 years) had a significantly higher operation rate (1.9%, P = 0.007) than the oldest cohort (80+ years) (0.5%, P = 0.004). There was no notable difference in corrective procedures between sex, geographic region, and initial closed reduction.

Discussion

Once surgical intervention is deemed unnecessary per standard guidelines, the data support successful nonsurgical management in a large majority of patients but highlight a small subset of younger patients who remain at increased risk of requiring additional surgery.

Effect of Radial Lengthening on Distal Forearm Loading Following Simulated In Vitro Radial Shortening During Simulated Dynamic Wrist Motion

PURPOSE

To evaluate the effect of radial length change on distal forearm loading during simulated dynamic wrist motion.

METHODS

A custom-built adjustable radial implant was used to simulate up to 4 mm of distal radius shortening (-4 mm) and 3 mm of lengthening (+3 mm). Load cells were placed in the distal radius and ulna in cadavers to measure their respective axial loads. The specimens were mounted on a wrist motion simulator that produced active wrist motion via tendon actuation. To simulate radial lengthening osteotomy following radial shortening from malunion, the radius was sequentially lengthened by 1-mm intervals from -4 mm to +3 mm. Radial and ulnar loads were measured during simulated wrist flexion, ulnar deviation (UD), and flexion dart throw (DT) at each interval of radial lengthening up to +3 mm.

RESULTS

During wrist flexion and UD, for each millimeter of radial lengthening from -4 mm to the native length, there was a significant increase in distal radial loads. No significant change in radial load was observed beyond the native length during flexion and UD. There was no change in distal radial loads during DT for each interval of radial lengthening from -4 mm to +3 mm. A sequential decrease in ulnar loads was observed as the radius was lengthened from -4 mm to +3 mm for all wrist motions evaluated.

CONCLUSIONS

Radial lengthening beyond the native length was not detrimental to radial loading and further reduced distal ulnar loading; achieving at least native ulnar variance seems to be appropriate to restore normal biomechanical loading based on this in vitro study.

CLINICAL RELEVANCE

Lengthening of the radius beyond native variance in the setting of ulnar impaction syndrome, distal radius malunion, or distal radioulnar instability may not result in excessive loading of the distal radius and further reduces loading on the distal ulna. Surgeons should obtain contralateral wrist x-rays to serve as a template when performing distal radius osteotomies.

Intramedullary nailing and plating osteosynthesis in the correction of post-traumatic deformity in late-diagnosed distal radius fractures: a retrospective comparison study

BACKGROUND

Various surgical modalities are available for correction of deformity in late-diagnosed distal radius fractures. This study compared surgical outcomes between intramedullary nailing and plating osteosynthesis in open-wedge osteotomy.

METHODS

We retrospectively reviewed 47 unilateral distal radius fractures that underwent open-wedge osteotomy at more than 4 weeks after injury between 2006 and 2011. A locally resected exuberant callus was used as the bone graft. Two types of fixation were used: intramedullary nail in 22 patients (group A) and locking plate in 25 patients (group B). Radiographic analysis including radial height, radial inclination, and volar tilt were performed preoperatively and 2-year postoperatively. The Modified Mayo Wrist Score (MMWS) was used for functional evaluation and a 10-point visual analog scale (VAS) for residual pain assessment. Patient satisfaction was self-reported as a 5-point scale. Radiographic data, functional outcomes, and surgical complications were compared between the two groups.

RESULTS

All fractures achieved bone union without major complications. The MMWS averaged 84.8 ± 9.7 in group A and 85.2 ± 8.4 in group B, without significant differences (p = 0.436). Instead, significant differences were found in mean wrist flexion (73.6 ± 7.9 vs. 69.6 ± 7.8 degrees; p = 0.042), patient satisfaction (3.6 ± 1.1 vs. 2.9 ± 1.2; p = 0.034), postoperative radial height (11.6 ± 2.6 vs. 10.2 ± 3 mm; p = 0.039) and inclination (20.8 ± 2.8 vs. 17.7 ± 4.1 degrees; p = 0.004), and implant-related complications (9% vs. 36%; p = 0.03). There were no significant differences in other assessment items including postoperative grip strength, pain scale, supination/pronation/extension, volar tilt, correction angles of all three parameters, and general complication rate. Four patients in group A (18%) and 2 in group B (8%) experienced postoperative paresthesia of the surgical hand; no significant difference was noted. All except one patient in group B had full recovery of neurological symptoms.

CONCLUSIONS

Open-wedge osteotomy with either an intramedullary nail or locking plate fixation yielded encouraging radiographic and functional outcomes. Intramedullary nail fixation may facilitate restoration of radial height and inclination with better wrist flexion, less implant-related complications, and greater patient satisfaction.

Implementation of a semiautomatic method to design patient-specific instruments for corrective osteotomy of the radius

PURPOSE

3D-printed patient-specific instruments (PSIs), such as surgical guides and implants, show great promise for accurate navigation in surgical correction of post-traumatic deformities of the distal radius. However, existing costs of computer-aided design and manufacturing process prevent everyday surgical use. In this paper, we propose an innovative semiautomatic methodology to streamline the PSIs design.

METHODS

The new method was implemented as an extension of our existing 3D planning software. It facilitates the design of a regular and smooth implant and a companion guide starting from a user-selected surface on the affected bone. We evaluated the software by designing PSIs starting from preoperative virtual 3D plans of five patients previously treated at our institute for corrective osteotomy. We repeated the design for the same cases also with commercially available software, with and without dedicated customization. We measured design time and tracked user activity during the design process of implants, guides and subsequent modifications.

RESULTS

All the designed shapes were considered valid. Median design times ([Formula: see text]) were reduced for implants (([Formula: see text]) = 2.2 min) and guides (([Formula: see text]) = 1.0 min) compared to the standard (([Formula: see text]) = 13 min and ([Formula: see text]) = 8 min) and the partially customized (([Formula: see text]) = 6.5 min and ([Formula: see text]) = 6.0 min) commercially available alternatives. Mouse and keyboard activities were reduced (median count of strokes and clicks during implant design (([Formula: see text]) = 53, and guide design (([Formula: see text]) = 27) compared to using standard software (([Formula: see text]) = 559 and ([Formula: see text]) = 380) and customized commercial software (([Formula: see text]) = 217 and ([Formula: see text]) = 180).

CONCLUSION

Our software solution efficiently streamlines the design of PSIs for distal radius malunion. It represents a first step in making 3D-printed PSIs technology more accessible.

The Effect of Dorsally Angulated Distal Radius Deformities on Carpal Kinematics: An In Vitro Biomechanical Study

PURPOSE

The purpose was to quantify the effect of distal radius dorsal angulation (DA) on carpal kinematics and the relative roles of the radiocarpal and midcarpal joints during wrist motion.

METHODS

Six cadaveric specimens (69 ± 17 y) were mounted at 90° elbow flexion in a custom wrist motion simulator. The wrist was guided through planar passive flexion and extension motion trials (∼ 5°/s). A custom modular distal radius implant was used to simulate native alignment and 3 distal radius DA deformities (10°, 20°, 30°). An optical tracking system captured carpal bone motion, from which radiocarpal and midcarpal joint motion was determined.

RESULTS

The radiocarpal joint made a greater contribution to wrist motion than the midcarpal joint in flexion, and the midcarpal joint made a greater contribution to motion than the radiocarpal joint in wrist extension. Increasing DA caused the radiocarpal joint contribution to increase throughout the motion arc, with the effect being more pronounced in wrist flexion. Conversely, as DA increased, the midcarpal joint contributed less rotation to the total wrist motion and its overall motion arc decreased; the magnitude of effect was greater in wrist extension. Dorsal angulation resulted in increased lunate flexion with respect to the distal radius.

CONCLUSIONS

Our findings agree with current literature that suggests that, in an uninjured wrist, the radiocarpal joint predominates flexion, and the midcarpal joint predominates extension. In addition, the radiocarpal joint has an amplified contribution in wrist flexion with greater DA malunion.

CLINICAL RELEVANCE

The altered contributions of the radiocarpal and midcarpal joints may contribute to pain, stiffness, and the development of arthritis, which is commonly seen at the radiocarpal joint after malunion of the distal radius.

Experimental Substantiation of the Possibility of Wrist Joint Arthroscopy Under Distraction with External Fixation Apparatus

In cases of splintered intra-articular distal radius fractures, it is important to accurately restore the joint surface. Wrist joint arthroscopy makes possible accurate assessment of intra-articular damage and reposition quality. The joint gap is to be enlarged for arthroscopy, but this can distort the topographic and anatomical relationships in the wrist joint. We performed a cadaveric study of changes in the topography of vessels and nerves and the risk of their traumatization under conditions of distraction with external fixation apparatus during arthroscopic portals formation. It was experimentally demonstrated that the use of external fixator did not limit the possibility of manipulation under arthroscopic control; distraction does not alter the topographic and anatomical relationships of the soft tissue elements in the wrist joint during arthroscopy.

Three-Dimensional Compared with Two-Dimensional Preoperative Planning of Corrective Osteotomy for Extra-Articular Distal Radial Malunion: A Multicenter Randomized Controlled Trial

BACKGROUND

Malunion is the most frequent complication seen after a fracture of the distal end of the radius. The primary aim of this study was to compare patient-reported outcome measures (PROMs) after corrective osteotomy for malunited distal radial fractures with and without 3-dimensional (3D) planning and use of patient-specific surgical guides.

METHODS

From September 2010 to May 2015, 40 adult patients with a symptomatic extra-articular malunited distal radial fracture were randomized to 3D computer-assisted planning or conventional 2-dimensional (2D) planning for corrective osteotomy. The primary outcome was the Disabilities of the Arm, Shoulder and Hand (DASH) score. Secondary outcomes included the Patient-Rated Wrist Evaluation (PRWE) score, pain and satisfaction scores, grip strength, and radiographic measurements at 3, 6, and 12 months postoperatively.

RESULTS

From baseline to 12 months of follow-up, the reduction in the mean DASH score was -30.7 ± 18.7 points for the 3D planning group compared with -20.1 ± 17.8 points for 2D planning (p = 0.103). Secondary functional outcome by means of the PRWE resulted in a similar reduction of -34.4 ± 22.9 points for the 3D planning group compared with -26.6 ± 18.3 points for the 2D planning group (p = 0.226). There were no significant differences in pain, satisfaction, range of motion, and grip strength. Radiographic analysis showed significant differences in the mean residual volar angulation (by 3.3°; p = 0.04) and radial inclination (by 2.7°; p = 0.028) compared with the templated side, in favor of 3D planning and guidance. The duration of preoperative planning and surgery as well as complication rates were comparable.

CONCLUSIONS

Although there was a trend toward a minimal clinically important difference in PROMs in favor of 3D computer-assisted guidance for corrective osteotomy of extra-articular distal radial malunion, it did not attain significance because of (post hoc) insufficient power. Despite the challenge of feasibility, a trial of large magnitude is warranted to draw definitive conclusions regarding clinical advantages of this advanced, more expensive technology.

LEVEL OF EVIDENCE

Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

Carpal Tunnel Syndrome Following Corrective Osteotomy for Distal Radius Malunion: A Rare Case Report and Review of the Literature

BACKGROUND

Although median nerve neuropathy and carpal tunnel syndrome (CTS) are known complications of both untreated and acutely treated distal radius fracture, median neuropathy after correction of distal radius malunion is not commonly reported in hand surgery literature. We describe a patient with severe CTS after corrective osteotomy, open reduction internal fixation (ORIF) with a volar locking plate (VLP), and bone grafting for distal radius malunion.

METHODS

We report a case of severe acute CTS as a complication of corrective osteotomy with bone grafting for distal radius malunion.

RESULTS

The patient was treated with surgical exploration of the median nerve and carpal tunnel release.

CONCLUSION

The authors report a case of acute CTS after ORIF with VLP for a distal radius malunion warranting surgical exploration and carpal tunnel release. Treatment teams must be aware of this potential complication so that the threshold for reoperation is low and irreversible damage to the median nerve is prevented.

Three-dimensional virtual planning of corrective osteotomies of distal radius malunions: a systematic review and meta-analysis

The purpose of this study was to summarize and evaluate results of three-dimensional (3D-) planned corrective osteotomies of malunited distal radius fractures. 3D-planning techniques provide the possibility to address 3D-deformity that conventional planning methods might not address. We systematically searched PubMed, EMBASE and the Cochrane library for studies that performed a 3D-planned corrective osteotomy on patients with a malunited distal radius fracture. Fifteen studies with a total of 68 patients were included in the analysis. In 96% of cases, the preoperatively present palmar tilt, radial inclination and ulnar variance showed statistically significant improvement postoperatively with restoration to within 5° or 2 mm of their normal values. Mean flexion–extension, pro-supination and grip strength showed statistically significant improvement (p < 0.05). Complications were reported in 11 out of 68 patients (16%). With the current advances in 3D printing technology, 3D-planned corrective osteotomies seem a promising technique in the treatment of complex distal radius malunions.

Level of evidence IV Systematic review of case series, Level IV.

Corrective osteotomy is an effective method of treating distal radius malunions with good long-term functional results

INTRODUCTION

Malunion occurs in approximately 23% of non-operatively treated and 11% of operatively treated distal radius fractures. The decision whether to correct a malunion is primarily based on functional impairment and wrist pain. The purpose of this study was to assess the long-term functional outcomes of corrective osteotomies for symptomatic malunited distal radius fractures.

METHODS

All consecutive corrective osteotomies of the distal radius performed in one centre between January 2009 and January 2016 were included. The primary outcome was the functional outcome assessed with the Disability of the Arm, Shoulder and Hand (DASH) and the Patient-Rated Wrist Evaluation (PRWE) score. Secondary outcomes were range of motion, grip strength, pain as indicated on the Visual Analogue Scale (VAS) before and after corrective osteotomy, radiological parameters, time to union and complications. Additionally, we aimed to determine if there were any difference in graft versus no graft usage.

RESULTS

A total of 48 patients were included. The median age was 54.5 years (IQR 39-66) and 71% was female. The median time to follow-up was 27 months. The median DASH and PRWE score were respectively 10.0 (IQR 5.8-23.3) and 18.5. (6.5-37.0). Except for pronation and supination, range of motion and grip strength of the injured wrist were significantly less compared to the uninjured side. Palmar and dorsal flexion and radial and ulnar deviation of the injured wrist were significantly less compared with the uninjured side. VAS pain scores decreased significantly from 6.5 preoperative to 1.0 postoperative. The median time to union was 23 weeks (IQR 12-29.5). Eighteen patients (38%) had a complication for which additional treatment was required. Except for a significant difference in radial inclination and length after the corrective osteotomy in favour of graft usage, there were no significant differences between graft an no graft usage.

CONCLUSIONS

Corrective osteotomy is an effective method of treating symptomatic distal radius malunions with good long-term functional results, measured with the DASH and PRWE score, and improvement in radiographic parameters and pain scores. Additionally, no differences in functional outcomes were found between graft and no graft usage.

Pearls and Pitfalls of the Volar Locking Plating for Distal Radius Fractures

Volar locking plate fixation has been widely accepted method for the treatment of unstable distal radius fractures. Although the results of volar locking plate fixation are encouraging, it may cause implant-related complications such as flexor or extensor tendon injuries. In depth understanding of anatomy of the distal radius is mandatory in order to obtain adequate fixation of the fracture fragments and to avoid these complications. This article will review the anatomic characteristics of the distal radius because selecting proper implant and positioning of the plate is closely related to the volar surface anatomy of the distal radius. The number and the length of distal locking screws are also important to provide adequate fixation strength to maintain fracture fixation. We will discuss the pros and cons of the variable-angle locking plate, which was introduced in an effort to provide surgeons with more freedom for fixation. Finally, we will discuss about correcting radial length and volar tilt by using eccentric drill holes and distal locking first technique.

Fixed Lunate Flexion Deformity in Distal Radius Fractures

Carpal malalignments in malunion of distal radius fracture are considered as an adaptive response of the carpus to loss of normal architecture of the distal radius. This condition leads to mechanical overload, ligament attenuation and progressive dynamic instability around the wrist joint. Radial corrective osteotomy is suggested as a treatment option of carpal malalignment after distal radius malunion. In radiocarpal malalignment, the lunate is usually observed in flexion in contrast to its extension posture in the more common midcarpal malalignment. We report two cases of fixed lunate flexion deformity after a distal radius fracture, in which reduction and fixation of fresh fracture or corrective osteotomy of malunion were not successful. Arthritic changes were observed in the radiolunate joint on arthroscopy. Thus, fixed flexion deformity of the lunate might be associated with posttraumatic arthritic change in the radiolunate joint.

The Effects of Dorsal Cortical Comminution on Radiographic Results following Percutaneous Pinning for Extra-Articular Colles' Fracture

A number of studies have demonstrated that dorsal cortical comminution (DCC) can predict redisplacement after nonoperative treatment of Colles' fractures; however, the effects of a DCC defect on radiographic outcomes following percutaneous pinning for dorsally displaced extraarticular Colles' fractures are unclear. We, therefore, performed a retrospective study on 85 patients who sustained such fractures treated with percutaneous pinning within 2006–2009. The main outcome measures included four radiographic parameters, including radial height, radial inclination, radial tilt, and ulnar variance. The radiological results showed that all fractures after percutaneous pinning followed the same time series changes and patterns of fracture collapse regardless of the presence of a DCC defect. The use of the pinning construct is to provide support for static loading but not for dynamic loading. Although the final radiographic outcomes were classified as acceptable in fractures with and without DCC, we recommend that a different approach in the management of displaced Colles' fractures might be necessary in consideration of increasing patient expectations of health care.

Is Bone Grafting Necessary in the Treatment of Malunited Distal Radius Fractures?

Background Open wedge osteotomy with bone grafting and plate fixation is the standard procedure for the correction of malunited distal radius fractures. Bone grafts are used to increase structural stability and to enhance new bone formation. However, bone grafts are also associated with donor site morbidity, delayed union at bone-graft interfaces, size mismatch between graft and osteotomy defect, and additional operation time. Purpose The goal of this study was to assess bone healing and secondary fracture displacement in the treatment of malunited distal radius fractures without the use of bone grafting. Methods Between January 1993 and December 2013, 132 corrective osteotomies and plate fixations without bone grafting were performed for malunited distal radius fractures. The minimum follow-up time was 12 months. Primary study outcomes were time to complete bone healing and secondary fracture displacement. Preoperative and postoperative radiographs during follow-up were compared with each other, as well as with radiographs of the uninjured side. Results All 132 osteotomies healed. In two cases (1.5%), healing took more than 4 months, but reinterventions were not necessary. No cases of secondary fracture displacement or hardware failure were observed. Significant improvements in all radiographic parameters were shown after corrective osteotomy and plate fixation. Conclusion This study shows that bone grafts are not required for bone healing and prevention of secondary fracture displacement after corrective osteotomy and plate fixation of malunited distal radius fractures. Level of evidence Therapeutic, level IV, case series with no comparison group.

Management of complications of distal radius fractures

Treating a fracture of the distal radius may require the surgeon to make a difficult decision between surgical treatment and nonsurgical management. The use of surgical fixation has recently increased because of complications associated with conservative treatment. However, conservative action may be necessary depending on certain patient factors. The treating surgeon must be aware of the possible complications associated with distal radius fracture treatments to prevent their occurrence. Prevention can be achieved with a proper understanding of the mechanism of these complications. This article discusses the most recent evidence on how to manage and prevent complications following a fracture of the distal radius.

Ulnar shortening osteotomy for distal radius malunion

Background Malunion is a common complication of distal radius fractures. Ulnar shortening osteotomy (USO) may be an effective treatment for distal radius malunion when appropriate indications are observed. Methods The use of USO for treatment of distal radius fracture malunion is described for older patients (typically patients >50 years) with dorsal or volar tilt less than 20 degrees and no carpal malalignment or intercarpal or distal radioulnar joint (DRUJ) arthritis. Description of Technique Preoperative radiographs are examined to ensure there are no contraindications to ulnar shortening osteotomy. The neutral posteroanterior (PA) radiograph is used to measure ulnar variance and to estimate the amount of ulnar shortening required. An ulnar, mid-sagittal incision is used and the dorsal sensory branch of the ulnar nerve is preserved. An USO-specific plating system with cutting jig is used to create parallel oblique osteotomies to facilitate shortening. Intraoperative fluoroscopy and clinical range of motion are checked to ensure adequate shortening and congruous reduction of the ulnar head within the sigmoid notch. Results Previous outcomes evaluation of USO has demonstrated improvement in functional activities, including average flexion-extension and pronosupination motions, and patient reported outcomes. Conclusion The concept and technique of USO are reviewed for the treatment of distal radius malunion when specific indications are observed. Careful attention to detail related to surgical indications and to surgical technique typically will improve range of motion, pain scores, and patient-reported outcomes and will reduce the inherent risks of the procedure, such as ulnar nonunion or the symptoms related to unrecognized joint arthritis.

LEVEL OF EVIDENCE

 Level IV.

The effect of distal radius translation in the coronal plane on forearm rotation: a cadaveric study of distal radius fractures

PURPOSE

To determine the effect of lateral translation of the distal radius in the coronal plane on forearm rotation after distal radius fracture.

METHODS

Ten fresh cadaveric limbs underwent distal radius osteotomy just proximal to the distal radial-ulnar joint to simulate an extra-articular distal radius fracture. We used an Agee Wrist Jack external fixator to create increasing magnitudes of distal fragment lateral translation in 2-mm increments. Forearm rotation was measured using a 3-dimensional camera at each magnitude of lateral translation.

RESULTS

Total forearm rotation for the intact specimen and 2, 4, 6, and 8 mm (maximal) radial translations was 186° ± 53°, 188° ± 54°, 189° ± 55°, 190° ± 57°, and 193° ± 59°, respectively. There was no significant difference for any magnitude of radial translation. The average maximal radial translation possible before radioulnar abutment was 8 ± 0.5 mm.

CONCLUSIONS

In this cadaveric model, translation of the distal radius fragment in the lateral direction had no effect on forearm rotation.

CLINICAL RELEVANCE

At the level of the proximal border of the distal radioulnar joint, isolated distal radius translation does not significantly affect forearm rotation.