Repair of Critical-Sized Rat Calvarial Defects With Three-Dimensional Hydroxyapatite-Gelatin Scaffolds and Bone Marrow Stromal Stem Cells

Plasma Spray vs. Electrochemical Deposition: Toward a Better Osteogenic Effect of Hydroxyapatite Coatings on 3D-Printed Titanium Scaffolds

Surface modification of three-dimensional (3D)-printed titanium (Ti) scaffolds with hydroxyapatite (HA) has been a research hotspot in biomedical engineering. However, unlike HA coatings on a plain surface, 3D-printed Ti scaffolds have inherent porous structures that influence the characteristics of HA coatings and osteointegration. In the present study, HA coatings were successfully fabricated on 3D-printed Ti scaffolds using plasma spray and electrochemical deposition, named plasma sprayed HA (PSHA) and electrochemically deposited HA (EDHA), respectively. Compared to EDHA scaffolds, HA coatings on PSHA scaffolds were smooth and continuous. In vitro cell studies confirmed that PSHA scaffolds have better potential to promote bone mesenchymal stem cell adhesion, proliferation, and osteogenic differentiation than EDHA scaffolds in the early and late stages. Moreover, in vivo studies showed that PSHA scaffolds were endowed with superior bone repair capacity. Although the EDHA technology is simpler and more controllable, its limitation due to the crystalline and HA structures needs to be improved in the future. Thus, we believe that plasma spray is a better choice for fabricating HA coatings on implanted scaffolds, which may become a promising method for treating bone defects.

Human Olfactory Mucosa Stem Cells Delivery Using a Collagen Hydrogel: As a Potential Candidate for Bone Tissue Engineering

For bone tissue engineering, stem cell-based therapy has become a promising option. Recently, cell transplantation supported by polymeric carriers has been increasingly evaluated. Herein, we encapsulated human olfactory ectomesenchymal stem cells (OE-MSC) in the collagen hydrogel system, and their osteogenic potential was assessed in vitro and in vivo conditions. Collagen type I was composed of four different concentrations of (4 mg/mL, 5 mg/mL, 6 mg/mL, 7 mg/mL). SDS-Page, FTIR, rheologic test, resazurin assay, live/dead assay, and SEM were used to characterize collagen hydrogels. OE-MSCs encapsulated in the optimum concentration of collagen hydrogel and transplanted in rat calvarial defects. The tissue samples were harvested after 4- and 8-weeks post-transplantation and assessed by optical imaging, micro CT, and H&E staining methods. The highest porosity and biocompatibility were confirmed in all scaffolds. The collagen hydrogel with 7 mg/mL concentration was presented as optimal mechanical properties close to the naïve bone. Furthermore, the same concentration illustrated high osteogenic differentiation confirmed by real-time PCR and alizarin red S methods. Bone healing has significantly occurred in defects treated with OE-MSCs encapsulated hydrogels in vivo. As a result, OE-MSCs with suitable carriers could be used as an appropriate cell source to address clinical bone complications.

Shapable bulk agarose-gelatine-hydroxyapatite-minocycline nanocomposite fabricated using a mineralising system aided with electrophoresis for bone tissue regeneration

To develop a shapable bulk antibacterial nanocomposite biomaterial for bone regeneration. A bulk agarose-gelatine hydrogel was through mineralised using a hydrogel mineralising system aided with electrophoresis, and the mineralised hydrogel was loaded with minocycline to obtain the agarose-gelatine-hydroxyapatite-minocycline nanocomposite. The nanocomposite had a large BET surface area of 44.4518m2/g and a high porosity of 76.9%. Hydroxyapatite crystals were well developed in the hydrogel matrix and exhibited a hybrid structure of microscale and nanoscale motifs. The addition of minocycline resulted in a continuous antibiotic release, inhibiting the growth of Staphylococcus aureus over two weeks in vitro. Exposed to rabbit bone marrow mesenchymal stem cells, the nanocomposite revealed good cytocompatibility in vitro. Furthermore, the biomaterial could effectively enhance the bone regeneration in a critical-size rabbit cranial defect model in vivo. These findings depicted that the nanocomposite, with good biocompatibility and good antibacterial property, is a promising candidate for future clinical application in bone tissue engineering or as a prospective bone replacement biomaterial.

Kidney extracellular matrix hydrogel enhances therapeutic potential of adipose-derived mesenchymal stem cells for renal ischemia reperfusion injury

Stem cell-based therapy has been suggested as a promising option for the treatment of renal ischemia-reperfusion injury (IRI). However, how to efficiently deliver stem cells remains a challenge. In the present study, we firstly proposed the utilization of kidney extracellular matrix hydrogel (ECMH) as an injectable scaffold for delivering adipose-derived mesenchymal stem cells (ad-MSCs) into ischemic kidneys. A modified strategy of decellularization and gelation was introduced to prepare the ECMH, by which the bioactive ingredients were retained as much as possible. Bioluminescence living imaging and immunofluorescence revealed that ECMH could significantly elevate the retention and survival rate of transplanted ad-MSCs in damaged kidneys and reduce their escape rate to other organs, which consequently resulted to the enhanced therapeutic effect of ad-MSCs on renal IRI. Further, in vitro evidence demonstrated that ECMH could remarkably reduce the oxidative stress and apoptosis, promote the proliferation, secretion, and epithelial differentiation of ad-MSCs, as well as facilitate cell migration while acting as a sustained-release scaffold. This study establishes an effective approach to enhance the therapeutic potential of ad-MSCs for renal IRI. Our findings suggest that ECMH derived from organs or tissues would be a promising injectable scaffold for stem cell-based therapy. STATEMENT OF SIGNIFICANCE: It remains a challenge to efficiently deliver stem cells to target tissues, which may limit the clinical application of stem cell-based therapy. In this study, we developed a modified strategy of decellularization and gelation to prepare the kidney extracellular matrix hydrogel (ECMH). In vivo and in vitro evidence indicated that the kidney ECMH could improve the retention and survival rate, as well as multiple biological functions of adipose-derived mesenchymal stem cells, thereby contributing to the histological and functional recovery of injured kidneys induced by ischemia-reperfusion. Our findings highlight the use of organs or tissues derived ECMH as a promising stem cell delivery scaffold for tissue repair.

Evaluation of the Use of an Inorganic Bone Matrix in the Repair of Bone Defects in Rats Submitted to Experimental Alcoholism

To assess the effects of chronic alcoholism on the repair of bone defects associated with xenograft. Forty male rats were distributed in: control group (CG, n = 20) and experimental group (EG, n = 20), which received 25% ethanol ad libitum after a period of adaptation. After 90 days of liquid diet, the rats were submitted to 5.0-mm bilateral craniotomy on the parietal bones, subdividing into groups: CCG (control group that received only water with liquid diet and the defect was filled with blood clot), BCG (control group that received only water with liquid diet and the defect was filled with biomaterial), CEG (alcoholic group that received only ethanol solution 25% v/v with liquid diet and the defect was filled with blood clot), and BEG (alcoholic group that received only ethanol solution 25% v/v with liquid diet and the defect was filled with biomaterial). In the analysis of body mass, the drunk animals presented the lowest averages in relation to non-drunk animals during the experimental period. Histomorphologically all groups presented bone formation restricted to the defect margins at 60 days, with bone islets adjacent to the BCG biomaterial particles. CEG showed significant difference compared to BEG only at 40 days (17.42 ± 2.78 vs. 9.59 ± 4.59, respectively). In the birefringence analysis, in early periods all groups showed red-orange birefringence turning greenish-yellow at the end of the experiment. The results provided that, regardless of clinical condition, i.e., alcoholic or non-alcoholic, in the final period of the experiment, the process of bone defect recomposition was similar with the use of xenograft or only clot.

Sema3A and HIF1α co-overexpressed iPSC-MSCs/HA scaffold facilitates the repair of calvarial defect in a mouse model

Mesenchymal stem/stromal cells (MSCs) play an important role in bone tissue engineering because MSCs possess multilineage potential of differentiation to mesenchymal tissues. Semaphorin 3A (Sema3A) and hypoxia-inducible factor-1α (HIF1α) are proved as important regulatory factors for osteogenesis and angiogenesis. The aim of this study was to investigate the effects of Sema3A and HIF1α co-overexpression on the osteogenesis and angiogenesis in induced pluripotent stem cell-derived mesenchymal stem cells (iPSC-MSCs). Importantly, we assessed the potential osteogenic effectiveness of Sema3A and HIF1α co-overexpressed iPSC-MSCs seeded on hydroxyapatite (HA) scaffold in a mouse calvarial defect model. The overexpression for Sema3A, HIF1α, or Sema3A-HIF1α fusion in iPSC-MSCs was performed by separately infecting with conducted lentiviral vector. We determined the cell proliferation, the expressions of osteogenic, and endothelial markers of iPSC-MSCs cultured in osteogenic or endothelial induction medium in vitro. A mouse model calvarial defect was created and implanted with the Empty implant, HA scaffold alone, HA scaffold combined with iPSC-MSCs that infected with negative control or Sema3A-HIF1α fusion for 8 weeks in vivo. The results showed that Sema3A and HIF1α co-overexpression reversed the reduced cell proliferation that reduced by Sema3A overexpression alone. Importantly, the co-overexpression significantly increased the expressions of osteogenic and angiogenic related-genes compared with negative control after induction. Moreover, the Sema3A-HIF1α co-overexpressed iPSC-MSCs seeded on HA scaffold boosted the new bone and collagen fiber formation and facilitated repair of calvarial defect in a mouse model, which might have the potential application for bone defect reconstruction.

Crosstalk between chitosan and cell signaling pathways

The field of tissue engineering (TE) experiences its most exciting time in the current decade. Recent progresses in TE have made it able to translate into clinical applications. To regenerate damaged tissues, TE uses biomaterial scaffolds to prepare a suitable backbone for tissue regeneration. It is well proven that the cell-biomaterial crosstalk impacts tremendously on cell biological activities such as differentiation, proliferation, migration, and others. Clarification of exact biological effects and mechanisms of a certain material on various cell types promises to have a profound impact on clinical applications of TE. Chitosan (CS) is one of the most commonly used biomaterials with many promising characteristics such as biocompatibility, antibacterial activity, biodegradability, and others. In this review, we discuss crosstalk between CS and various cell types to provide a roadmap for more effective applications of this polymer for future uses in tissue engineering and regenerative medicine.

Synthesis and Evaluation of BMMSC-seeded BMP-6/nHAG/GMS Scaffolds for Bone Regeneration

Bioactive scaffolding materials and efficient osteoinductive factors are key factors for bone tissue engineering. The present study aimed to mimic the natural bone repair process using an osteoinductive bone morphogenetic protein (BMP)-6-loaded nano-hydroxyapatite (nHA)/gelatin (Gel)/gelatin microsphere (GMS) scaffold pre-seeded with bone marrow mesenchymal stem cells (BMMSCs). BMP-6-loaded GMSs were prepared by cross-linking and BMP-6/nHAG/GMS scaffolds were fabricated by a combination of blending and freeze-drying techniques. Scanning electron microscopy, confocal laser scanning microscopy, and CCK-8 assays were carried out to determine the biocompatibility of the composite scaffolds in vitro. Alkaline phosphatase (ALP) activity was measured to evaluate the osteoinductivity of the composite scaffolds. For in vivo examination, critical-sized calvarial bone defects in Sprague-Dawley rats were randomly implanted with BMMSC/nHAG/GMS and BMMSC/BMP-6/nHAG/GMS scaffolds, and compared with a control group with untreated empty defects. The BMP-6-loaded scaffolds showed cytocompatibility by favoring BMMSC attachment, proliferation, and osteogenic differentiation. In radiological and histological analyses, the BMMSC-seeded scaffolds, especially the BMMSC-seeded BMP-6/nHAG/GMS scaffolds, significantly accelerated new bone formation. It is concluded that the BMP-6/nHAG/GMS scaffold possesses excellent biocompatibility and good osteogenic induction activity in vitro and in vivo, and could be an ideal bioactive substitute for bone tissue engineering.