Endo-1,4-beta-xylanase B from Aspergillus cf. niger BCC14405 isolated in Thailand: purification, characterization and gene isolation

Enzymatic potential of endophytic fungi: xylanase production by Colletotrichum boninense from sugarcane biomass

Endophytic fungi constitute a major part of the still unexplored fungal diversity and have gained interest as new biological sources of natural active compounds, including enzymes. Endophytic fungi were isolated from soybean leaves and initially screened on agar plates for the production of CMCase (carboxymethylcellulase), xylanase, amylase and protease. The highest Enzymatic Indexes (IE) were verified for xylanase (2.14 and 1.31) with the fungi M6-A6P5F2 and M12-A5P3F1.2 and CMCase (1.92 and 1.62) with the fungi M13-A9P2F1 and M12-A5P3F1.2, respectively. The production of xylanase and CMCase by the selected fungi was evaluated in submerged cultivation using beechwood xylan and carboxymethylcellulose (CMC), as well as sugarcane straw and bagasse in different ratios as carbon sources. Both types of lignocellulosic biomass proved to be good inducers of enzymatic activity. The best xylanase producer among the isolates was identified as Colletotrichum boninense. With this fungus, the highest xylanase activity was obtained with a sugarcane straw-bagasse mixture in a 50:50 ratio (383.63 U mL-1), a result superior to that obtained with the use of beechwood xylan (296.65 U mL-1). Regardingthe kinetic behavior of the crude xylanase, there was found optimal pH of 5.0 and optimal temperatures of 50°C and 60°C. At 40°C and 50°C, xylanase retained 87% and 76% of its initial catalytic activity, respectively. These results bring new perspectives on bioprospecting endophytic fungi for the production of enzymes, mainly xylanase, as well as the exploitation of agro-industrial by-products, such as sugarcane straw and bagasse.

Biochemical characterization of xylanase GH11 isolated from Aspergillus niger BCC14405 (XylB) and its application in xylooligosaccharide production

OBJECTIVE

To develop an endo-β-1,4-xylanase with high specificity for production of prebiotic xylooligosaccharides that optimally works at moderate temperature desirable to reduce the energy cost in the production process.

RESULTS

The xylB gene, encoding for a glycosyl hydrolase family 11 xylanase from a thermoresistant fungus, Aspergillus niger BCC14405 was expressed in a methylotrophic yeast P. pastoris KM71 in a secreted form. The recombinant XylB showed a high specific activity of 3852 and 169 U mg^-1 protein on beechwood xylan and arabinoxylan, respectively with no detectable side activities against different forms of cellulose (Avicel Ò PH101 microcrystalline cellulose, phosphoric acid swollen cellulose and carboxymethylcellulose). The enzyme worked optimally at 45 °C, pH 6.0. It showed a specific cleavage pattern by releasing xylobiose (X2) as the major product from xylooligosaccharides (X3 to X6) substrates. The highest XOS yield of 708 mg g^-1 substrate comprising X2, X3 and X6 was obtained from beechwood xylan hydrolysis.

CONCLUSION

The enzyme is potent for XOS production and for saccharification of lignocellulosic biomass.

Purification, Identification, and Characterization of a Glycoside Hydrolase Family 11-Xylanase with High Activity from Aspergillus niger VTCC 017

Xylanases (EC 3.2.1.8) have been considered as a potential green solution for the sustainable development of a wide range of industries including pulp and paper, food and beverages, animal feed, pharmaceuticals, and biofuels because they are the key enzymes that degrade the xylosidic linkages of xylan, the major component of the second most abundant raw material worldwide. Therefore, there is a critical need for the industrialized xylanases which must have high specific activity, be tolerant to organic solvent or detergent and be active during a wide range of conditions, such as high temperature and pH. In this study, an extracellular xylanase was purified from the culture broth of Aspergillus niger VTCC 017 for primary structure determination and properties characterization. The successive steps of purification comprised centrifugation, Sephadex G-100 filtration, and DEAE-Sephadex chromatography. The purified xylanase (specific activity reached 6596.79 UI/mg protein) was a monomer with a molecular weight of 37 kDa estimating from SDS electrophoresis. The results of LC/MS suggested that the purified protein is indeed an endo-1,4-β-D-xylanase. The purified xylanase showed the optimal temperature of 55 °C, and pH 6.5 with a stable xylanolytic activity within the temperature range of 45-50 °C, and within the pH range of 5.0-8.0. Most divalent metal cations including Zn²⁺, Fe²⁺, Mg²⁺, Cu²⁺, Mn²⁺ showed some inhibition of xylanase activity while the monovalent metal cations such as K⁺ and Ag⁺ exhibited slight stimulating effects on the enzyme activity. The introduction of 10-30% different organic solvents (n-butanol, acetone, isopropanol) and several detergents (Triton X-100, Tween 20, and SDS) slightly reduced the enzyme activity. Moreover, the purified xylanase seemed to be tolerant to methanol and ethanol and was even stimulated by Tween 80. Overall, with these distinctive properties, the putative xylanase could be a successful candidate for numerous industrial uses.

Optimization of β-1,4-Endoxylanase Production by an Aspergillus niger Strain Growing on Wheat Straw and Application in Xylooligosaccharides Production

Plant biomass constitutes the main source of renewable carbon on the planet. Its valorization has traditionally been focused on the use of cellulose, although hemicellulose is the second most abundant group of polysaccharides on Earth. The main enzymes involved in plant biomass degradation are glycosyl hydrolases, and filamentous fungi are good producers of these enzymes. In this study, a new strain of Aspergillus niger was used for hemicellulase production under solid-state fermentation using wheat straw as single-carbon source. Physicochemical parameters for the production of an endoxylanase were optimized by using a One-Factor-at-a-Time (OFAT) approach and response surface methodology (RSM). Maximum xylanase yield after RSM optimization was increased 3-fold, and 1.41- fold purification was achieved after ultrafiltration and ion-exchange chromatography, with about 6.2% yield. The highest activity of the purified xylanase was observed at 50 °C and pH 6. The enzyme displayed high thermal and pH stability, with more than 90% residual activity between pH 3.0–9.0 and between 30–40 °C, after 24 h of incubation, with half-lives of 30 min at 50 and 60 °C. The enzyme was mostly active against wheat arabinoxylan, and its kinetic parameters were analyzed (K_m = 26.06 mg·mL⁻¹ and V_max = 5.647 U·mg⁻¹). Wheat straw xylan hydrolysis with the purified β-1,4 endoxylanase showed that it was able to release xylooligosaccharides, making it suitable for different applications in food technology.

Cloning, Expression, and Characterization of Xylanase G2 from Aspergillus oryzae VTCC-F187 in Aspergillus niger VTCC-F017

The study focuses on engineering of recombinant Aspergillus niger to produce highly active xylanase. The xylanase G2 encoding gene originating from Aspergillus oryzae VTCC-F187 was cloned, amplified, and inserted into the pAN7.1GluA vector with specific primers possessing BamHI. The recombinant plasmid was introduced into Aspergillus niger VTCC-F017 by chemical methods. The recombinant strain was checked by polymerase chain reaction method and Southern blot. Next, the recombinant protein was expressed and purified by His-tag column. The molecular mass of the purified xylanase G2, as determined by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE), was 21 kDa with a specific activity of 1025 IU/mg towards 0.5% (w/v) of birchwood xylan. The optimal temperature and pH were 55°C and pH 6.5, respectively. The enzyme was stable in a temperature ranges 25–40°C and a pH ranges 5–7. The presence of Tween 80 enhanced xylanase activity. Triton X-100, however, had no impact on the function of the enzyme. The xylanase activity was reduced by Tween 20, SDS, and organic solvents. The enzyme was completely inhibited by Hg2+ and partially by Zn2+, Fe2+, and Ag+, while it was slightly stimulated by K+ and EDTA.

A Highly Efficient Xylan-Utilization System in Aspergillus niger An76: A Functional-Proteomics Study

Xylan constituted with β-1,4-D-xylose linked backbone and diverse substituted side-chains is the most abundant hemicellulose component of biomass, which can be completely and rapidly degraded into fermentable sugars by Aspergillus niger. This is of great value for obtaining renewable biofuels and biochemicals. To clarify the underlying mechanisms associated with highly efficient xylan degradation, assimilation, and metabolism by A. niger, we utilized functional proteomics to analyze the secreted proteins, sugar transporters, and intracellular proteins of A. niger An76 grown on xylan-based substrates. Results demonstrated that the complete xylanolytic enzyme system required for xylan degradation and composed of diverse isozymes was secreted in a sequential order. Xylan-backbone-degrading enzymes were preferentially induced by xylose or other soluble sugars, which efficiently produced large amounts of xylooligosaccharides (XOS) and xylose; however, XOS was more efficient than xylose in triggering the expression of the key transcription activator XlnR, resulting in higher xylanase activity and shortening xylanase-production time. Moreover, the substituted XOS was responsible for improving the abundance of side-chain-degrading enzymes, specific transporters, and key reductases and dehydrogenases in the pentose catabolic pathway. Our findings indicated that industries might be able to improve the species and concentrations of xylan-degrading enzymes and shorten fermentation time by adding abundant intermediate products of natural xylan (XOS) to cultures of filamentous fungi.

Taxonomic identification of the thermotolerant and fast-growing fungus Lichtheimia ramosa H71D and biochemical characterization of the thermophilic xylanase LrXynA

The zygomycete fungus Lichtheimia ramosa H71D, isolated from sugarcane bagasse compost, was identified by applying phylogenetic analysis based on the DNA sequence of the Internal Transcribed Spacer (ITS), and subsequent secondary structure analysis of ITS2. L. ramosa H71D was able to grow over a wide range of temperatures (25–45 °C), manifesting optimal growth at 37 °C. A 64 kDa xylanase (named LrXynA) was purified from the culture supernatant of L. ramosa H71D grown on 2% carboxymethylcellulose (CMC), as the only carbon source. LrXynA displayed optimal activity at pH 6 and temperature of 65 °C. The enzyme retained more than 50% of its maximal activity over a broad range of pH values (4.5–7.5). Enzyme half-life (t_½) times at 55, 65 and 75 °C were 80, 25, and 8 min, respectively. LrXynA showed higher affinity (k_M of 2.87 mg/mL) and catalytic efficiency (k_cat/k_M of 0.651 mg s/mL) towards Beechwood xylan in comparison to other substrates such as Birchwood xylan, Oat-spelt xylan, CMC, Avicel and Solka floc. The predominant final products from LrXynA-mediated hydrolysis of Beechwood xylan were xylobiose and xylotriose, suggesting that the enzyme is an endo-β-1,4 xylanase. Scanning electron microscopy (SEM) imaging of sugar cane bagasse (SCB) treated with LrXynA, alone or in combination with commercial cellulases, showed a positive effect on the hydrolysis of SCB. To our knowledge, this is the first report focusing on the biochemical and functional characterization of an endo-β-1,4 xylanase from the thermotolerant and fast-growing fungus Lichtheimia ramosa.

Molecular characterization of a Xylanase-producing fungus isolated from fouled soil

Xylanase (EC 3. 2. 1. 8), hydrolyzes xylo-oligosaccharides into D-xylose and required for complete hydrolysis of native cellulose and biomass conversion. It has broad range of applications in the pulp and paper, pharmaceutical and Agri-food industries. Fifty fungal species were isolated from the fouled soil around an oil refinery and screened for the production of xylanase enzyme by enrichment culture techniques. The isolated fungal strain was identified as Hypocrea lixii SS1 based on the results of biochemical tests and 18s rRNA sequencing. The phylogenetic tree was constructed using the MEGA 5 software. Further, Hypocrea lixii SS1 was tested for the ability to utilize the sunflower oil sludge (waste from the oil industry) as the sole carbon source for xylanase production. The growth characteristics of Hypocrea lixii SS1 were also studied and maximum growth was found on the 7^th day of incubation. The fungus showed a remarkable xylanase production of 38.9 U/mL. Xylanase was purified using a combination of 0–50% NH₄SO₂ precipitation, DEAE-sepharose and Sephacryl S-200 chromatography. Single peak obtained in RP-HPLC confirms the purity of xylanase. Further the enzyme produced was affirmed as xylanase with its molecular weight (29 kDa) using SDS-PAGE.

Molecular characterization of a glycosyl hydrolase family 10 xylanase from Aspergillus niger

A gene coding for an endo-β-1,4-xylanase (XlnA) (glycosyl hydrolase family 10) from Aspergillus niger DSM 1957 was cloned and sequenced. The cDNA sequence (984 bp) and its putative endoxylanase (327 aa protein with a predicted molecular mass of 35.5 kDa and pI 6.23) showed 91.3-99.5% and 96.3-99.1% identities with cDNA sequences and their corresponding endoxylanases from A. niger strains from GenBank, respectively. The cDNA was expressed in Pichia pastoris GS115 under the control of AOX1 promoter at a level of 46.4 U/ml culture supernatant, after 144 h of growth at 30°C in YP medium induced with 0.5% (v/v) of methanol. The molecular mass of the purified XlnA determined by SDS-PAGE was 35.5k Da with a specific activity of 808.5 U/mg towards 1% (w/v) of birch wood xylan. Temperature and pH optimum were observed at 50°C and pH 7.0, respectively. The enzyme was stable over a temperature range of 25-40°C and at pH range of 4.5-8.5 and resistant to Tween 80 and acetone. The K(m) and V(max) value obtained for the purified xylanase were 25.5mg/ml and 5000 μmol/min/mg protein with birch wood xylan as substrate, respectively. The xylanase was free of cellulase and mannanase activity but highly active towards birch wood xylan. The major products of the birch wood xylan hydrolysis were predicted as xylotriose, xylotetraose, and xylopentose. The biochemical characteristics suggested that the recombinant xylanase has a potential application, including use as a feed enzyme.

Analysis of functional xylanases in xylan degradation by Aspergillus niger E-1 and characterization of the GH family 10 xylanase XynVII

Xylanases produced by Aspergillus niger are industrially important and many types of xylanases have been reported. Individual xylanases have been well studied for their enzymatic properties, gene cloning, and heterologous expression. However, less attention has been paid to the relationship between xylanase genes carried on the A. niger genome and xylanases produced by A. niger strains. Therefore, we examined xylanase genes encoded on the genome of A. niger E-1 and xylanases produced in culture. Seven putative xylanase genes, xynI–VII (named in ascending order of the molecular masses of the deduced amino acid sequences), were amplified from the strain E-1 genome using primers designed from the genome sequence of A. niger CBS 513.88 by PCR and phylogenetically classified into three clusters. Additionally, culture supernatant analysis by DE52 anion–exchange column chromatography revealed that this strain produced three xylanases, XynII, XynIII, and XynVII, which were identified by N-terminal amino acid sequencing and MALDI-TOF-MS analyses, in culture when gown in 0.5% xylan medium supplemented with 50 mM succinate. Furthermore, XynVII, the only GH family 10 xylanase in A. niger E-1, was purified and characterized. The purified enzyme showed a single band with a molecular mass of 35 kDa by SDS-PAGE. The highest activity of purified XynVII was observed at 55°C and pH 5.5. The enzyme was stable in the broad pH range of 3–10 and up to 60°C and was resistant to most metal ions and modifying regents. XynVII showed high specificity against beechwood xylan with K_m and V_max values of 2.8 mg mL^–1 and 127 μmol min^–1mg^–1, respectively. TLC and MALDI-TOF-MS analyses showed that the final hydrolyzed products of the enzyme from beechwood xylan were xylose, xylobiose, and xylotriose substituted with a 4-o-metylglucuronic acid residue.

Molecular cloning and characterization of a GH11 endoxylanase from Chaetomium globosum, and its use in enzymatic pretreatment of biomass

An endo-1,4-β-xylanase gene, xylcg, was cloned from Chaetomium globosum and successfully expressed in Escherichia coli. The complete gene of 675 bp was amplified, cloned into the pET 28(a) vector, and expressed. The optimal conditions for the highest activity of the purified recombinant XylCg were observed at a temperature of 40 °C and pH of 5.5. Using oat-spelt xylan, the determined K m, V max, and k cat/K m values were 0.243 mg ml⁻¹, 4,530 U mg⁻¹ protein, and 7,640 ml s⁻¹ mg⁻¹, respectively. A homology model and sequence analysis of XylCg, along with the biochemical properties, confirmed that XylCg belongs to the GH11 family. Rice straw pretreated with XylCg showed 30 % higher conversion yield than the rice straw pretreated with a commercial xylanase. Although xylanases have been characterized from fungal and bacterial sources, C. globosum XylCg is distinguished from other xylanases by its high catalytic efficiency and its effectiveness in the pretreatment of lignocellulosic biomass.

Mapping the polysaccharide degradation potential of Aspergillus niger

Background

The degradation of plant materials by enzymes is an industry of increasing importance. For sustainable production of second generation biofuels and other products of industrial biotechnology, efficient degradation of non-edible plant polysaccharides such as hemicellulose is required. For each type of hemicellulose, a complex mixture of enzymes is required for complete conversion to fermentable monosaccharides. In plant-biomass degrading fungi, these enzymes are regulated and released by complex regulatory structures. In this study, we present a methodology for evaluating the potential of a given fungus for polysaccharide degradation.

Results

Through the compilation of information from 203 articles, we have systematized knowledge on the structure and degradation of 16 major types of plant polysaccharides to form a graphical overview. As a case example, we have combined this with a list of 188 genes coding for carbohydrate-active enzymes from Aspergillus niger, thus forming an analysis framework, which can be queried. Combination of this information network with gene expression analysis on mono- and polysaccharide substrates has allowed elucidation of concerted gene expression from this organism. One such example is the identification of a full set of extracellular polysaccharide-acting genes for the degradation of oat spelt xylan.

Conclusions

The mapping of plant polysaccharide structures along with the corresponding enzymatic activities is a powerful framework for expression analysis of carbohydrate-active enzymes. Applying this network-based approach, we provide the first genome-scale characterization of all genes coding for carbohydrate-active enzymes identified in A. niger.

Molecular identification using ITS sequences and genome shuffling to improve 2-deoxyglucose tolerance and xylanase activity of marine-derived fungus, Aspergillus sp. NRCF5

During the screening of xylanolytic enzyme from marine-derived fungi isolated from the inner tissue of Egyptian soft coral Rhytisma sp., one strain, NRCF5, exhibited high enzyme activity with 0.1 % (w/v) antimetabolite 2-deoxyglucose (2DG) tolerance. This fungal strain was identified as Aspergillus sp. NRCF5 based on its morphological characteristics and internal transcribed spacer (ITS) sequences. The ITS region of hyperactive xylanolytic strain (NRCF5) was amplified, sequenced, and submitted to GenBank (accession no. JQ277356). To apply the fundamental principles of genome shuffling in breeding of xylanase-producing fungi, marine-derived fungus Aspergillus sp. NRCF5 was used as starting strain in this work and applied for induction of genetic variability using different combinations and doses of mutagens. Five mutants with high xylanase activity and 0.25 % (w/v) antimetabolite 2DG tolerance were obtained from the populations generated by the mutation of combination between ultraviolet irradiation (UV, 5 min) and N-methyl-N-nitro-N-nitrosoguanidine (NTG, 100 μg/ml) for 30 (UNA) and 60 (UNB)min as well as NTG (100 μg/ml) and ethidium bromide (250 μg/ml) for 30 (NEA) and 60 (NEB)min. Then, they were subjected for recursive protoplast fusion. Seven hereditarily stable recombinants with high xylanase activity and 1.0 % (w/v) 2DG tolerance were obtained by four rounds of genome shuffling. Among them, a high xylanase-producing recombinant, R4/31, was obtained, which produced 427.5 U/ml xylanase. This value is 6.13-fold higher than that of the starting strain NRCF5 and 2.48-fold higher than that of the parent strain (mutant NEA51). The subculture experiments indicated that the high producer of marine Aspergillus sp. R4/31 fusant was stable.

Biochemical and biophysical characterization of purified thermophilic xylanase isoforms in Cereus pterogonus plant spp

Two thermostable xylanase isoforms T₆₀ and T₈₀ were purified to homogeneity from the cladodes of the xerophytic Cereus pterogonus plant species. After three consecutive purification steps, the specific activity of T₆₀ and T₈₀ isoforms were found to be 178.6 and 216.2 U mg⁻¹ respectively. The molecular mass of both isoforms was determined to be 80 kDa. The optimum temperature for T₆₀ and T₈₀ xylanase isoforms were 60 and 80 °C respectively. The pH was 5.0 for both isoforms. The presence of divalent metal ions (10 mM Co²⁺) showed stimulatory effects of both catalytic activities, where as in the presence of Hg²⁺, Cd²⁺, Cu²⁺ showed inhibitory effect on these activities at all concentrations studied. The thermodynamic analysis of xylanase activity using denaturation kinetics and the presence divalent cations at 30-100 °C, showed lower ΔH, ΔS, and ΔG values at all the temperatures investigated. The melting temperature of purified T₈₀ xylanase isoform as determined by TG/DTA analysis and it showed the unfolding temperature was 80 °C. The g value and hyperfine (A) value purified xylanase T₈₀ isoform was 2.017 and 10.80 respectively. Immunoblot analysis with antiserum raised against the purified T₈₀ xylanase isoforms revealed single immunolgically related polypeptides of 80 kDa, identical with the polypeptide band produced on SDS-PAGE. The results of double immunodiffusion against the T₈₀ isoforms showed a single precipitin line indicating that the serum used was specific to these xylanase isoforms. The kinetic and thermodynamic properties suggested that xylanase from C. pterogonus may have a potential usage in various industries.

GH11 xylanases: Structure/function/properties relationships and applications

For technical, environmental and economical reasons, industrial demands for process-fitted enzymes have evolved drastically in the last decade. Therefore, continuous efforts are made in order to get insights into enzyme structure/function relationships to create improved biocatalysts. Xylanases are hemicellulolytic enzymes, which are responsible for the degradation of the heteroxylans constituting the lignocellulosic plant cell wall. Due to their variety, xylanases have been classified in glycoside hydrolase families GH5, GH8, GH10, GH11, GH30 and GH43 in the CAZy database. In this review, we focus on GH11 family, which is one of the best characterized GH families with bacterial and fungal members considered as true xylanases compared to the other families because of their high substrate specificity. Based on an exhaustive analysis of the sequences and 3D structures available so far, in relation with biochemical properties, we assess biochemical aspects of GH11 xylanases: structure, catalytic machinery, focus on their "thumb" loop of major importance in catalytic efficiency and substrate selectivity, inhibition, stability to pH and temperature. GH11 xylanases have for a long time been used as biotechnological tools in various industrial applications and represent in addition promising candidates for future other uses.

Purification and characterization of thermophilic xylanase isolated from the xerophytic-Cereus pterogonus sp

A thermo stable xylanase was purified and characterized from the cladodes of Cereus pterogonus plant species. The enzyme was purified to homogeneity by ammonium sulfate (80%) fractionation, ion exchange and size exclusion chromatography. The enzyme showed a final specific activity of 216.2 U/mg and the molecular mass of the protein was 80 KDa. The optimum pH and temperature for xylanase activity were 5.0 and 80 °C, respectively. With oat spelt xylan as a substrate the enzyme yielded a Km value of 2.24 mg/mL and a Vmax of 5.8 μmol min(-1) mg(-1). In the presence of metal ions (1 mM) such as Co(2+),Mn(2+), Ni(2+), Ca(2+) and Fe(3+) the activity of the enzyme increased, where as strong inhibition of the enzyme activity was observed with the use of Hg(2+), Cd(2+), Cu(2+), while partial inhibition was noted with Zn(2+) and Mg(2+). The substrate specificity of the xylanase yielded maximum activity with oat spelt xylan.

Hyperexpression of two Aspergillus Niger Xylanase Genes in Escherichia Coli and Characterization of the Gene Products

The analysis of individual gene product should enable to clarify the role of a particular enzyme in a complex xylanase system of A. niger. The two genes encoding precursors of co-produced endo-1,4-β-D-xylanases, xynA1 and xynB, were isolated from Aspergillus niger SCTCC 400264 (SCTCC, China) by using RT-PCR technique and then successfully expressed in Escherichia coli BL21. The nucleotide sequences of the xynA1 and xynB genes revealed that they were only 52.5% homology to each other. Characterization of the recombinant enzymes revealed the different properties: the specific activity of recombinant XYNA1 was 16.58 U/mg compared to 1201.7 U/mg for recombinant XYNB; The optimum temperature and pH of the recombinant XYNA1 were 35 °C and 3.0, respectively, whereas the corresponding values for the recombinant XYNB were 55 °C and 5.0, respectively; The recombinant XYNB showed much more thermostability than recombinant XYNA1; The recombinant XYNB showed 94% of maximal activity after incubating in water for 60 min at 60 °C compared to no activity for recombinant XYNA1. Various metal ions had different effects on activity between the two recombinant xylanases.

Purification and characterization of a thermostable xylanase from the brown-rot fungus Laetiporus sulphureus

A thermostable extracellular xylanase was purified and characterized from brown-rot basidiomycete Laetiporus sulphureus, cultivated on biologically pretreated Pinus densiflora biomass. After three consecutive purification steps using DEAE, Mono Q, and Superdex 75 columns, the xylanase specific activity was found to be 72.4 U/mg, nine fold higher than that of the crude culture solution, purity was 96%, and the molecular mass determined to be 69.3 kDa. The optimal pH and temperature for xylanase activity were 3.0 and 80 degrees C, respectively. Although activity of xylanase was highest at 80 degrees C, it showed highest thermostability at 60 degrees C, retaining approximately 97% of its relative activity following incubation for 4 h. In the presence of 5 mM solution of CaCl2, the relative xylanase activity increased by 35.9%; however, it decreased significantly in the presence of 10 mM solution of Cu2+. Among the xylan-based substrates tested, purified L. sulphureus xylanase showed the highest activity on beechwood xylan. Thin-layer chromatography (TLC) experiments revealed that purified L. sulphureus xylanase is an endoxylanase that hydrolyzes xylotriose, xylotetraose, and xylopentaose but not xylobiose.

Improvement of thermostability of fungal xylanase by using site-directed mutagenesis

Replacing several serine and threonine residues on the Ser/Thr surface of the xylanase from Aspergillus niger BCC14405 with four and five arginines effectively increases the thermostability of the enzyme. The modified enzymes showed 80% of maximal activity after incubating in xylan substrate for 2h at 50 degrees C compared to only 15% activity for wild-type enzyme. The half-life of the mutated enzymes increased to 257+/-16 and 285+/-10 min for the four- and five-arginine mutants, respectively, compared to 14+/-1 min for the wild-type enzyme. Thus, the arginine substitutions effectively increase stability by 18-20-fold. Kinetic parameters of the four-arginine-substitution enzyme were maintained at the level of the wild-type enzyme with the K(m) and V(max) values of 8.3+/-0.1 mgml(-1) and 9556+/-66 (n=3) U mg(-1) protein, respectively. The five-arginine-substitution enzyme showed only slight alteration in K(m) and V(max) with K(m) of 11.7+/-1.7 mgml(-1) and V(max) of 8502+/-65 Umg(-1) protein, indicating lower substrate affinity and catalytic rate. Our study demonstrated that properly introduced arginine residues on the Ser/Thr surface of xylanase family 11 might be very effective in improvement of enzyme thermostability.

Cloning and expression of xylanase 10 from Cryptovalsa mangrovei (BCC7197) in Pichia pastoris

Xylanases are one of the industrially valuable enzymes. Using RT-PCR and 5'- and 3'-RACE procedures, we have cloned a full-length xylanase encoding gene from a filamentous fungus, Cryptovalsa mangrovei (BCC7197) from Phuket, Thailand. The results showed that BCC7197 xylanase cDNA has an open reading frame of 978 bp encoding 325 amino acid residues. Further sequence analysis revealed that this xylanase gene is belonged to the glycosyl hydrolase family 10 and has approximately 50-60% amino acid sequence similarity to other fungal xylanases. Furthermore, expression of BCC7197 xylanase in the Pichia pastoris was also performed. The results demonstrated that the active BCC7197 xylanase protein was successfully produced and secreted from P. pastoris.

Cloning, expression, and characterization of a xylanase 10 from Aspergillus terreus (BCC129) in Pichia pastoris

A full-length xylanase gene, encoding 326 amino acids belonging to the fungal glycosyl hydrolase family 10, from Aspergillus terreus BCC129 was cloned and sequenced. Sequence analysis suggested that the first 25 amino acids of this enzyme is the signal peptide. Therefore, only the mature xylanase gene of 906 bp was cloned into a yeast expression vector, pPICZalphaA, for heterologous expression in Pichia pastoris. A band of approximately, 33 kDa was observed on the SDS-PAGE gel after one day of methanol induction. The expressed enzyme was purified by gel filtration chromatography. The purified recombinant xylanase demonstrated optimal activity at 60 degrees C, pH 5.0 and a Km of 4.8 +/- 0.07 mg/ml and a Vmax of 757 +/- 14.54 micromol/min mg, using birchwood xylan as a substrate. Additionally, the purified enzyme demonstrated broad pH stability from 4 to 10 when incubated at 40 degrees C for 4 h. It also showed a moderate thermal stability since it retained 90% of its activity when incubated at 50 degrees C, 30 min, making this enzyme a potential use in the animal feed and paper and pulp industries.