Auto Flow-Focusing Droplet Reinjection Chip-Based Integrated Portable Droplet System (iPODs)

Droplet microfluidics provides powerful tools for biochemical applications. However, precise fluid control is usually required in the process of droplet generation and detection, which hinders droplet-based applications in point-of-care testing (POCT). Here, we present a droplet reinjection method capable of droplet distribution without precise fluid control and external pumps by which the droplets can be passively aligned and detected one by one at intervals. By further integrating the surface-wetting-based droplet generation chip, an integrated POrtable Droplet system (iPODs) is developed. The iPODs integrates multiple functions such as droplet generation, online reaction, and serial reading. Using the iPODs, monodisperse droplets can be generated at a flow rate of 800 Hz with a narrow size distribution (CV <2.2%). Droplets are kept stable, and the fluorescence signal can be significantly identified after the reaction. The spaced droplet efficiency in the reinjection chip is nearly 100%. In addition, we validate digital loop-mediated isothermal amplification (dLAMP) within 80 min with a simple operation workflow. The results show that iPODs has good linearity (R² = 0.999) at concentrations ranging from 10¹ to 10⁴ copies/μL. Thus, the developed iPODs highlights its potential to be a portable, low-cost, and easy-to-deploy toolbox for droplet-based applications.

Analysis of Phosphatase Activity in a Droplet-Based Microfluidic Chip

We report analysis of phosphatase activity and inhibition on droplet-based microfluidic chips. Phosphatases are such attractive potential drug targets because abnormal phosphatase activity has been implicated in a variety of diseases including cancer, neurological disorders, diabetes, osteoporosis, and obesity. So far, several methods for assessing phosphatase activity have been reported. However, they require a large sample volume and additional chemical modifications such as fluorescent dye conjugation and nanomaterial conjugation, and are not cost-effective. In this study, we used an artificial phosphatase substrate 3-O-methylfluorescein phosphate as a fluorescent reporter and dual specificity phosphatase 22. Using these materials, the phosphatase assay was performed from approximately 340.4 picoliter (pL) droplets generated at a frequency of ~40 hertz (Hz) in a droplet-based microfluidic chip. To evaluate the suitability of droplet-based platform for screening phosphatase inhibitors, a dose–response inhibition study was performed with ethyl-3,4-dephostatin and the half-maximal inhibitory concentration (IC₅₀) was calculated as 5.79 ± 1.09 μM. The droplet-based results were compared to microplate-based experiments, which showed agreement. The droplet-based phosphatase assay proposed here is simple, reproducible, and generates enormous data sets within the limited sample and reagent volumes.

A Concise Review of Dendrocalamus asper and Related Bamboos: Germplasm Conservation, Propagation and Molecular Biology

Bamboos represent an emerging forest resource of economic significance and provide an avenue for sustainable development of forest resources. The development of the commercial bamboo industry is founded upon efficient molecular and technical approaches for the selection and rapid multiplication of elite germplasm for its subsequent propagation via commercial agro-forestry business enterprises. This review will delve into the micropropagation of Dendrocalamus asper, one of the most widely cultivated commercial varieties of bamboo, and will encompass the selection of germplasm, establishment of explants in vitro and micropropagation techniques. The currently available information pertaining to molecular biology, DNA barcoding and breeding, has been included, and potential areas for future research in the area of genetic engineering and gene regulation have been highlighted. This information will be of relevance to both commercial breeders and molecular biologists who have an interest in establishing bamboo as a crop of the future.

A Specific Nucleic Acid Microfluidic Capture Device Based on Stable DNA Nanostructure

Benefiting from superior programmability and good biocompatibility, DNA nanomaterials have received considerable attention with promising prospects in biological detection applications. However, their poor stability and operability severely impede further development of the applications of DNA nanomaterials. Here, a thermally stable DNA nanomesh structure is integrated into a microfluidic chip. The specificity of the nucleic acid microfluidic capture device could reach the single-base mismatch level while capturing the ssDNA sample. The microfluidic chip provides a closed environment for the DNA nanomesh, giving the device excellent storage stability. After 6 months of storage at room temperature, the device still has a specific capture function on ssDNA samples with low concentration. The specific nucleic acid microfluidic capture device can be applied to the enrichment of ctDNA in the future and contribute to the early diagnosis of cancer.

New applications of advanced instrumental techniques for the characterization of food allergenic proteins

Current approaches based on electrophoretic, chromatographic or immunochemical principles have allowed characterizing multiple allergens, mapping their epitopes, studying their mechanisms of action, developing detection and diagnostic methods and therapeutic strategies for the food and pharmaceutical industry. However, some of the common structural features related to the allergenic potential of food proteins remain unknown, or the pathological mechanism of food allergy is not yet fully understood. In addition, it is also necessary to evaluate new allergens from novel protein sources that may pose a new risk for consumers. Technological development has allowed the expansion of advanced technologies for which their whole potential has not been entirely exploited and could provide novel contributions to still unexplored molecular traits underlying both the structure of food allergens and the mechanisms through which they sensitize or elicit adverse responses in human subjects, as well as improving analytical techniques for their detection. This review presents cutting-edge instrumental techniques recently applied when studying structural and functional aspects of proteins, mechanism of action and interaction between biomolecules. We also exemplify their role in the food allergy research and discuss their new possible applications in several areas of the food allergy field.

Microfluidic devices for neutrophil chemotaxis studies

Neutrophil chemotaxis plays a vital role in human immune system. Compared with traditional cell migration assays, the emergence of microfluidics provides a new research platform of cell chemotaxis study due to the advantages of visualization, precise control of chemical gradient, and small consumption of reagents. A series of microfluidic devices have been fabricated to study the behavior of neutrophils exposed on controlled, stable, and complex profiles of chemical concentration gradients. In addition, microfluidic technology offers a promising way to integrate the other functions, such as cell culture, separation and analysis into a single chip. Therefore, an overview of recent developments in microfluidic-based neutrophil chemotaxis studies is presented. Meanwhile, the strength and drawbacks of these devices are compared.

Recent Advances in Droplet-based Microfluidic Technologies for Biochemistry and Molecular Biology

Recently, droplet-based microfluidic systems have been widely used in various biochemical and molecular biological assays. Since this platform technique allows manipulation of large amounts of data and also provides absolute accuracy in comparison to conventional bioanalytical approaches, over the last decade a range of basic biochemical and molecular biological operations have been transferred to drop-based microfluidic formats. In this review, we introduce recent advances and examples of droplet-based microfluidic techniques that have been applied in biochemistry and molecular biology research including genomics, proteomics and cellomics. Their advantages and weaknesses in various applications are also comprehensively discussed here. The purpose of this review is to provide a new point of view and current status in droplet-based microfluidics to biochemists and molecular biologists. We hope that this review will accelerate communications between researchers who are working in droplet-based microfluidics, biochemistry and molecular biology.

Monolithic nano-porous polymer in microfluidic channels for lab-chip liquid chromatography

In this paper, a nano-porous polymer has been integrated into the microfluidics device as on-chip monolithic liquid chromatography column for separation of chemical and biological samples. Monolithic nano-porous polymer (MNP) was formed and firmly grafted on the surface of the microfluidic channel. Neurotransmitters, 5-hydroxyindole-3-acetic acid (5-HIAA) and 5-hydroxytryptamine (serotonin, 5-HT), were successfully separated with the developed on-chip MNP column.

Analysis of Membrane Behavior of a Normally Closed Microvalve Using a Fluid-Structure Interaction Model

In this paper, membrane deflection against fluid flow and opening membrane (threshold) pressure were studied using fluid-structure interaction (FSI) analysis, and compared with experimental data obtained by Jaemin et al. In the current analysis, two different models (I-shaped and V-shaped) were used to perform the FSI simulation. In microvalve modeling, in order to reduce external actuator usage, interconnections are made between two similar microvalves. This typical interconnection creates a pressure distribution in a local environment. Furthermore, to differentiate the volume factor in a microvalve, a length/width (L/W) ratio term was used. Compared with higher- and lower-L/W-ratio models, the higher-L/W model eventually initiates more deflection in a low-pressure regime than the lower-L/W-ratio model. FSI simulations were performed for 4 μL/min, 6 μL/min, 8 μL/min, 10 μL/min, and 12 μL/min flow rates against membrane behavior, and performance evaluations of the microvalves were conducted. It was observed during an FSI simulation that the gate pressure applied to the lower surface deflects the membrane upward, thereby making contact with the wall. Two important parameters (material properties of the structural membrane and the inlet region height) were selected for analysis to evaluate changes in microvalve performance. These results are presented in the current study.

Rapid Detection of Food Allergens by Microfluidics ELISA-Based Optical Sensor

The risks associated with the presence of hidden allergens in food have increased the need for rapid, sensitive, and reliable methods for tracing food allergens in commodities. Conventional enzyme immunosorbent assay (ELISA) has usually been performed in a centralized lab, requiring considerable time and sample/reagent consumption and expensive detection instruments. In this study, a microfluidic ELISA platform combined with a custom-designed optical sensor was developed for the quantitative analysis of the proteins wheat gluten and Ara h 1. The developed microfluidic ELISA biosensor reduced the total assay time from hours (up to 3.5 h) to 15-20 min and decreased sample/reagent consumption to 5-10 μL, compared to a few hundred microliters in commercial ELISA kits, with superior sensitivity. The quantitative capability of the presented biosensor is a distinctive advantage over the commercially available rapid methods such as lateral flow devices (LFD) and dipstick tests. The developed microfluidic biosensor demonstrates the potential for sensitive and less-expensive on-site determination for rapidly detecting food allergens in a complex sample system.

Microfluidic Diffusion Analysis of the Sizes and Interactions of Proteins under Native Solution Conditions

Characterizing the sizes and interactions of macromolecules under native conditions is a challenging problem in many areas of molecular sciences, which fundamentally arises from the polydisperse nature of biomolecular mixtures. Here, we describe a microfluidic platform for diffusional sizing based on monitoring micron-scale mass transport simultaneously in space and time. We show that the global analysis of such combined space-time data enables the hydrodynamic radii of individual species within mixtures to be determined directly by deconvoluting average signals into the contributions from the individual species. We demonstrate that the ability to perform rapid noninvasive sizing allows this method to be used to characterize interactions between biomolecules under native conditions. We illustrate the potential of the technique by implementing a single-step quantitative immunoassay that operates on a time scale of seconds and detects specific interactions between biomolecules within complex mixtures.

Point-of-care (POC) devices by means of advanced MEMS

Microelectromechanical systems (MEMS) have become an invaluable technology to advance the development of point-of-care (POC) devices for diagnostics and sample analyses. MEMS can transform sophisticated methods into compact and cost-effective microdevices that offer numerous advantages at many levels. Such devices include microchannels, microsensors, etc., that have been applied to various miniaturized POC products. Here we discuss some of the recent advances made in the use of MEMS devices for POC applications.

Continuous and low error-rate passive synchronization of pre-formed droplets

A microfluidic droplet-handling architecture for the synchronization of asynchronous, mis-matched, pre-formed droplet streams is demonstrated.

Density-gradient-free microfluidic centrifugation for analytical and preparative separation of nanoparticles

Sedimentation and centrifugation techniques are widely applied for the separation of biomolecules and colloids but require the presence of controlled density gradients for stable operation. Here we present an approach for separating nanoparticles in free solution without gradients. We use microfluidics to generate a convective flow perpendicular to the sedimentation direction. We show that the hydrodynamic Rayleigh-Taylor-like instability, which, in traditional methods, requires the presence of a density gradient, can be suppressed by the Poiseuille flow in the microchannel. We illustrate the power of this approach by demonstrating the separation of mixtures of particles on the nanometer scale, orders of magnitude smaller than the micrometer-sized objects separated by conventional inertial microfluidic approaches. This technique exhibits a series of favorable features including short analysis time, small sample volume, limited dilution of the analyte, limited interactions with surfaces as well as the possibility to tune easily the separation range by adjusting the geometry of the system. These features highlight the potential of gradient-free microfluidic centrifugation as an attractive route toward a broad range of nanoscale applications.

Integration of monolithic porous polymer with droplet-based microfluidics on a chip for nano/picoliter volume sample analysis

In this paper, a porous polymer nanostructure has been integrated with droplet-based microfluidics in a single planar format. Monolithic porous polymer (MPP) was formed selectively within a microfluidic channel. The resulting analyte bands were sequentially comartmentalised into droplets. This device reduces band broadening and the effects of post-column dead volume by the combination of the two techniques. Moreover it offers the precise control of nano/picoliter volume samples.

Integrated pneumatic micro-pumps for high-throughput droplet-based microfluidics

Droplet-based microfluidic systems have recently emerged as powerful experimental tools in the chemical and biological sciences.

Microfluidic chip-based technologies: emerging platforms for cancer diagnosis

The development of early and personalized diagnostic protocols is considered the most promising avenue to decrease mortality from cancer and improve outcome. The emerging microfluidic-based analyzing platforms hold high promises to fulfill high-throughput and high-precision screening with reduced equipment cost and low analysis time, as compared to traditional bulky counterparts in bench-top laboratories. This article overviewed the potential applications of microfluidic technologies for detection and monitoring of cancer through nucleic acid and protein biomarker analysis. The implications of the technologies in cancer cytology that can provide functional personalized diagnosis were highlighted. Finally, the future niches for using microfluidic-based systems in tumor screening were briefly discussed.

Programmable active droplet generation enabled by integrated pneumatic micropumps

In this work we have investigated the integrated diaphragm micropump as an active fluidic control approach for the on-demand generation of droplets with precisely defined size, frequency and timing. In contrast to valve-actuated devices that only modulate the flow of the dispersed phase being continuously injected, this integrated micropump allows the combination of fluidic transport and modulation to achieve active control of droplet generation. A distinct characteristic of this method compared to the valve modulated droplet formation processes is that it enables independent control of droplet generation frequency by adjusting the pumping frequency and droplet size by flow conditions. We also demonstrated the generation of complex droplet patterns through programming the pumping configurations and the application to multi-volume digital PCR for precise and quantitative detection of genetic targets. Overall, our results suggest that the pump-based droplet microfluidics provide a robust platform for programmable active droplet generation which could facilitate the development of high-performance chemical and biological assays.