A study of the symmetry of roots and root canal morphology in mandibular anterior teeth using cone-beam computed tomographic imaging in a Polish population

Classifying the internal anatomy of anterior teeth in the Yemeni population using two systems: a retrospective CBCT study

A precursor for effective root canal treatment (RCT) is a complete understanding of the internal anatomy of teeth. In this study, the authors aimed to classify the root canal morphology of anterior teeth in the Yemeni population and identify gender-based variations among them. In addition, the symmetry among adjacent quadrants was also evaluated. Cone beam computed tomography (CBCT) scans of 2935 anterior teeth, 1502 maxillary, and 1433 mandibular were analyzed for root canal morphology and symmetry. Comparison between groups and among different genders was done using the Chi-square test. All the maxillary teeth were single-rooted and had a predominantly 1TN1 (Vertucci Type I) canal morphology. In addition to 1TN1, the presence of 1TN1-2-1 (Vertucci type III) and 1TN1-2-1-2-1 (not classified NC according to Vertucci) morphologies were noticed in the maxillary canines. Among the mandibular anteriors, the canal morphologies identified include 1TN1 in majority of the scans followed by 1TN2-1 (Vertucci II), 1TN1-2-1, 1TN1-2 (Vertucci V), 1TN1-2-1-2 (Vertucci VII) was seen only in incisors and newer canal types like 1TN2-1-2-1 (NC Vertucci) and 1TN1-2-1-2-1 (NC Vertucci) was seen in canines and lateral incisors. Two roots were only seen in the mandibular canines and classified as 2TN1-2 (NC Vertucci). Variations in root and root canal morphologies were seen among both genders. However, the results were not significant. All the maxillary teeth except 0.8% were bilaterally symmetrical. In mandible, symmetry ranged between 84.5 and 86.5%. In conclusion, single-rooted teeth with 1TN1 classification are most commonly seen in all the anterior teeth. Gender-based differences were non-significant, and bilateral symmetry was high. Ahmed et al. classification could precisely represent the root canal morphology in two rooted teeth.

Radicular Dentin Thickness and Root Canal Morphology of Mandibular Incisors in Indian Subpopulation Using Cone Beam Computed Tomography

Aim Using two classifications, this study assessed root morphology and canal configuration and measured the Dentin thickness (DT) and canal shapes. Methods Cone beam computed tomography (CBCT) with 400 Mandibular Incisors was collected and assessed for the number, length, curvature of roots, number of canals, bifurcation level, configurations based on Vertucci's and Ahmed's classification, DT and canal shape at 3, 6, 9 mm from the apex. The collected data was subjected to statistical analysis with a level of significance at p<0.05. Results All samples had one root, averaging 12.769 ± 1.128 mm in central incisor (CI) and 13.044 ± 1.235 mm in lateral incisor (LI), with most roots being straight. Most samples had one canal in both teeth, with bifurcations most frequent in the middle third. The most frequent configuration was type 1 Vertucci or 1CI1/1LI1 by Ahmed, followed by type 3 or 1CI1-2-1/1LI1-2-1. One sample, not classifiable under Vertucci, was classified as 1CI1-3-1 by Ahmed. The mean DT for CI was 3.18 ± 0.639 mm, 3.72 ± 0.671 mm and 4.43 ± 0.754 mm labiolingually and 1.578 ± 0.342 mm, 1.881 ± 0.374 mm, 2.283 ± 0.465 mm mesioditally at 3, 6, 9 mm from the apex, respectively. For LI, mean DT was 3.41 ± 0.916 mm, 3.90 ± 0.702 mm and 4.55 ± 0.746 mm labiolingually and 1.63 ± 0.322 mm, 1.981 ± 0.485 mm, 2.55 ± 0.470 mm mesioditally at 3, 6, 9 mm from the apex respectively, canal shape changed from oval to round, from apical to coronal. Conclusion Single canals were the most common, followed by two canals. The middle third of the canal had the most bifurcations. Vertucci type 1 or Ahmed's 1CI1/1LI1  was the most commonly reported canal configuration, with one sample that could not be classified under Vertucci but could be classified using Ahmed classification. DT increased apical to coronal. The canal shape changed from oval to rounded, from apical to coronal.

Variations in Root Canal Morphology of Mandibular Incisors in a North Indian SubPopulation: A Retrospective Cone-Beam Computed Tomography Analysis

Background

There is a high failure rate of endodontic treatment in the mandibular incisors due to insufficient knowledge of the morphology.

Aim

The aim of this study was to analyze the root canal morphology in mandibular incisor teeth in the North Indian subpopulation to improve the outcome of endodontic treatment.

Setting and Design

A cross-sectional study was conducted at the OPD of a tertiary care institute.

Materials and Methods

A total of 200 mandibular central incisors and 200 mandibular lateral incisors were selected from available cone-beam computed tomography examinations of 100 patients aged 18-79 years. They were evaluated for root canal system configuration and symmetry between right and left elements in the same individual.

Statistical Analysis

Chi-square/Fisher's exact test was used to find the association between different study variables.

Results

For mandibular central incisors, type I Vertucci classification was present in 69% of cases, type II in 3.5%, type III in 18.5%, type IV in 2%, and type V in 7% of cases. For mandibular lateral incisors, type I was present in 70.5% of cases, type II in 4% of cases, type III in 19.5%, type IV in 2%, and type V in 4% of cases. There was no evidence of types VI, VII, and VIII. Symmetry of root canal morphology between left and right teeth was observed in 90% of central incisors and 93% of lateral incisors.

Conclusion

Type I Vertucci configuration was the most prevalent; however, the prevalence of other configurations is also evident. Therefore, endodontists should explore the morphology of these teeth carefully while performing root canal treatments.

Morphometric micro-CT study of contralateral mandibular incisors

OBJECTIVES

This study aimed to determine the degree of similarity and symmetry in the anatomy of contralateral mandibular incisors. Three-dimensional (3D) models of extracted teeth were obtained from microtomography (micro-CT) scans. Qualitative and quantitative assessments of the morphology and comparison of contralateral pairs were made. The null hypothesis was that contralateral mandibular incisors could not be considered identical in simple morphometric measurements.

METHODS

Sixty pairs of mandibular incisors were extracted from 30 patients and scanned with micro-CT. Virtual models of the cemento-enamel junction to the root apex were rendered. Parameters such as length, canal width, dentinal thicknesses, tortuosity, centerline length, accessory canals, root canal configurations, and root canal orifice cross-sections were used to compare the teeth. Width and thickness comparisons between paired teeth in the same individual were made by paired t-test (Wilcoxon signed-rank test for variables not normally distributed). An online randomization tool generated randomized pairs (independent of the individual/patient). Subsequently, an unpaired t-test (or Mann-Whitney U test for non-normally distributed parameters) and a correlation analysis were conducted. Canal configurations were classified according to preexisting classification schemes. The number and location of accessory canals and apical foramina were registered and compared.

RESULTS

Utilizing advanced imaging techniques and quantitative analyses, our study establishes that contralateral mandibular incisors exhibit a remarkable degree of symmetry in multiple morphological parameters, including length, canal width, and dentinal thicknesses. The apical third showed a high degree of inter-variability for the contralateral pairs. The rigorous statistical analysis of the normalized parameters by Z-score showed no statistically significant differences between the contralateral mandibular incisors. Comparisons between central and lateral teeth revealed differences in root length but no significant disparity in the distribution of accessory canals. Central teeth, on average, were longer, while accessory canals were distributed relatively evenly between central and lateral teeth.

CONCLUSIONS

The findings of this study further establish the significant similarities between contralateral mandibular incisors, reinforcing their suitability as a reliable substrate for root canal comparison studies.

CLINICAL RELEVANCE

The absence of statistically significant differences between contralateral pairs in normalized parameters underscores their potential as a reliable reference point for root canal comparison studies in clinical dentistry. Furthermore, our findings emphasize the importance of individualized treatment planning, considering the natural symmetry in mandibular incisors to enhance clinical decision-making. This research contributes valuable insights to the field of endodontics, offering a standardized approach to sample selection and enriching the understanding of dental anatomy.

Comparative study of Vertucci and Ahmed classifications to evaluate the main root canal configuration of mandibular incisors in a Brazilian population

This study aimed to compare the main root canal configurations of mandibular incisors (MI) in a Brazilian population using Vertucci and Ahmed et al. classifications. One hundred and sixty-five human permanent MI were scanned using a micro-CT. Two examiners classified the samples according to Vertucci and Ahmed et al. classification. Kappa coefficient was employed. The majority of MI had a single root canal (52.1%). Type III Vertucci and ¹ MI^1-2-1 Ahmed et al. was the most common 2-canal MI (20%). In the apical third, the presence of one, two and three canals was found in 81.8%, 15.2% and 3% respectively. In the cervical and middle thirds, one, two and three canals were found in 86%, 12.2% and 1.8% respectively. Ahmed et al. classification was able to classify the entire sample studied, whereas 11 teeth (6.66%) did not fit Vertucci's classification.

Evaluation of root and canal morphologies of permanent canines in a Saudi Arabian sub population using cone-beam computed tomography

Background/purpose

Failure to identify and treat the root canal system in its entirety has been known to be one of the leading causes of unsuccessful root canal treatment (RCT). This study aims to retrospectively assess the permanent canines in a Saudi Arabian sub population for the number of roots, root canal morphologies and the presence of symmetry among them using cone-beam computed tomography (CBCT).

Materials and methods

CBCT scans belonging to 945 patients were screened. A total of 1880 permanent canines, 928 pertaining to maxilla and 952 pertaining to mandible were analyzed for the number of roots, root canal morphologies and the presence of symmetry among them. Comparative evaluation between genders was done using Fisher's exact test, since majority of the groups had expected count of less than 5. A calculated P-value of less than 0.05 was considered significant. Chi square test was used for statistical analysis of the data. Intra operator variability was observed using Cohen's Kappa test.

Results

Single root was observed in 100% and 98.7% of the maxillary and mandibular canines respectively. Two roots were identified in 1.3% of the MnC's. Type I (97.48%), Type II (0.21%), Type III (1.05%) and Type V (1.26%) Vertucci canal configurations (VC) were observed in MnC's. Statistical significant difference was observed concerning the number of roots and canal morphology according to Vertucci in the mandibular canines. No difference was observed according to Ahmed et al. classification system. Moreover, there was no gender based difference seen among them.

Conclusion

More variable root and canal morphologies are observed in MnC's, although single root with Type I VC is the most common.

Radiographic assessment of root canal morphology of mandibular central incisors using new classification system: A cross-sectional study

Lack of basic knowledge about the external and internal anatomies of the root canal system and common variations in teeth may lead to various procedural errors or treatment failure. In this study, the root canal configurations of mandibular incisors and the symmetry of the contralateral incisors of Saudi Arabian subpopulations were analyzed and determined using cone beam computed tomography (CBCT). A retrospective evaluation of 700 patients was conducted, and 1260 fully developed permanent mandibular central incisors were assessed. The number of root canals was determined, and the internal root canal anatomies were categorized based on Ahmed et al.'s criteria. The CBCT images were independently evaluated by 2 trained dentists and an endodontist. The data were assessed using the chi-square and one-way analysis of variance tests. All the mandibular central incisors included in the study were single-rooted. According to Ahmed et al's classification system, the most common classification (82.6%) was 1ManA1 (Vertucci type I), followed by 1ManA1-2-1 (Vertucci type III; 13%). Second canals were more frequently recorded in the male participants than in the female participants. The root canal configuration between contralateral incisors was largely symmetrical. Most of the mandibular incisors in the examined Saudi Arabian population had a single canal. Nevertheless, a substantial number of patients had a complex root morphology. Hence, CBCT can be utilized as a potential supplementary tool during root canal treatment.

Root Morphology and Canal Configuration of Permanent Canines Among Saudi Population: Systematic Review and Comparison with Worldwide Studies

Aim

The root morphology and canal configuration (RMCC) of mandibular and maxillary canines among Saudi population is systematically reviewed and compared with international studies in this research.

Methods

This study was carried out following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses recommendations. The electronic databases of PubMed, Science Direct, Scopus, Wiley Library, Google website search, and Web of Science were searched. Only local and international cross-sectional, comparative, evaluation, and validation studies or case reports published between 2016 and 2022 that directly evaluated canine RMCC and assessed participants using cone beam computed tomography were included.

Results

Forty-three studies that investigated RMCCs (17 local and 26 international) were involved in this review. The original Saudi research recorded that almost 100% of maxillary canines had one root and one canal, whereas 98.4% and 94.1% had one root and one canal in the mandibular arch. Vertucci's class I had the highest percentages in the maxillary and mandibular arches at 98.3% and 95.8%, respectively, followed by class III with 0.7% and 1.9% for the same arches, respectively. International studies recorded that 100% of maxillary canines had one canal and root; the percentages of the mandibular arch were 92.3 and 98% for single canal and root, respectively; and the highest percentage was obtained by Vertucci's class I (91.1%), followed by class III (4.7%).

Conclusion

This review reports and confirmed the symmetry of the RMCCs of maxillary and mandibular canines between Saudi studies and other populations. Moreover, Vertucci's classes I and III were the most frequent RMCCs, and two-rooted canines in both arches were considerably less frequently than single-rooted ones.

Assessment of the Root Canal Similarity in Contralateral Mandibular Incisors

INTRODUCTION

The purpose of this study was to determine the degree of similarity between contralateral mandibular incisors utilising 3-dimensional (3D) models obtained from micro-computed tomographic (micro-CT) scans of extracted human teeth. The null hypothesis was that contralateral mandibular incisors do not exhibit matching symmetry.

METHODS

Sixty pairs (n = 120) of extracted mandibular incisors were obtained from 30 patients and scanned with micro-CT with a voxel size of 15.0 μm. 3D virtual models of the pulpal cavities were rendered. Geometric morphometric deviation analysis was performed after mirroring, automatic alignment, and co-registration of the models of contralateral teeth root mean square (RMS) errors were calculated. The quantitative analysis of the 3D models included 6 different geometric parameters. Data sets were examined with a 2-sample Kolmogorov-Smirnov test. Post hoc retrospective power analysis was performed to find statistical power (α = 0.05).

RESULTS

Contralateral pairs had a narrower distribution in deviation than random pairs. Also, contralateral pairs showed a statistically higher similarity coefficient (5 out of 6 geometric parameters) compared to random pairs (P < .001); no difference was found when comparing central to lateral pairs or between Vertucci type I configurations compared to non-type I. RMS errors had significantly lower Contralateral premolars (CPs) values than random pairs (P < .001).

CONCLUSIONS

A high degree of similarity was demonstrated for pairing contralateral mandibular incisors using 3D models. The similarity between contralateral central and lateral incisors suggests that when screened and matched, these 4 teeth might be used in endodontic research where similar root canal anatomy is crucial.

Analysis of Root Canal Anatomy of Mandibular Permanent Incisors in Saudi Subpopulation: A Cone-Beam Computed Tomography (CBCT) Study

This study aimed to evaluate the root canal anatomy of central and lateral mandibular incisors in a Saudi population using cone-beam computed tomography (CBCT). Overall, 1370 CBCT images of central (687) and lateral (683) mandibular incisors of Saudi patients who attended the Dental College at King Saud University in Riyadh were examined. The number of roots and canals, canal configuration types, symmetry between bilateral incisors, and the effect of gender and age were determined. For data analysis, the chi-square test was applied, and the p value was set at ≤0.05. Only one tooth had two roots, and 41% of mandibular incisors had two canals. The most common canal configuration type observed was type I (58.83%), followed by type III (28.24%). Type V was more common in men (8.31%) than women (3.9%). Bilateral symmetries were higher in the mandibular central incisors regarding the root and canal numbers and the canal configuration types (100, 100, and 97.92%, respectively) than in the lateral incisors (99.69, 98.16, and 97.24%, respectively). The 21-40 age group showed a higher proportion of teeth with more complicated root canal anatomy than the other age groups. More than one canal in mandibular incisors is a common finding in the Saudi subpopulation, with the type III canal configuration as the most common type.

Modern Approaches and Innovations on Methods and Imaging Protocols of the Maxillofacial District

In recent years, improvements in imaging techniques have profoundly changed the diagnosis of pathologies of the maxillofacial district [...].

Root Canal Morphology and Configuration of the Mandibular Canine: A Systematic Review

The aim of this study was to systematically review the root canal morphology and configuration (RCC) of mandibular canines (MaCa). The review was registered in the PROSPERO database (ID-272297) and it was carried out following the PRISMA guidelines. Three electronic databases (MEDLINE via PubMed, Embase, Scopus) were searched. Randomized controlled trials, cross-sectional, cohort, comparative, evaluation and validation studies have been included. The anatomical quality assessment (AQUA) tool was used for a quality assessment of the anatomical studies. Of 910 studies retrieved from the systematic search, 28 studies investigating RCCs were included. Most MaCa were single-rooted (87.9-100%), while two-rooted MaCa were present up to 12.1%. The 1-1-1/1 (35.8-96.4%) was the most commonly reported RCC, followed by 2-2-1/1 (0.2-22.0%) and 1-2-1/1 (0.9-20.0%). A high frequency of 1-1-1/1 RCC in MaCa has been described. Most systematic review reports confirm that two-rooted MaCa are found considerably less frequently than single-rooted ones.

Root Canal Morphology of the Permanent Mandibular Incisors by Cone Beam Computed Tomography: A Systematic Review

Knowledge of dental anatomy through the assessment of the anatomic variations of each tooth’s root canal system is essential to undertake endodontic therapy. The aim of this systematic review was to analyze the different studies on the internal morphology of permanent mandibular incisors where Cone-Beam Computed Tomography (CBCT) X-ray imaging is used. Pubmed, CENTRAL, Wiley Library and Web of Science electronic databases were searched for scientific studies included until March 2020. The terms used in the search were: “permanent mandibular incisors”, “root canal morphology” and “cone-beam computed tomography”. The search was limited to studies whose aim was the analysis of the morphology of the root canal system evaluating the parameters of methodology, population, sample, number and configuration. A total of 19 studies met the inclusion criteria. There was a noticeable lack of unanimity in the setting adjustments of each of the CBCT devices used. The presence of two root canals varied from 0.4% to 45%. The most frequent configurations were Vertucci’s Types I, III, II, V, IV, VII and VI. Type VIII configuration was non-existent. CBCT revealed the existence of anatomical symmetry patterns, and there was no unanimity of criteria regarding the presence of a second root canal. Results concerning the presence of a second root canal in the mandibular incisors differ widely, with a possible influence of the geographic area where the study was conducted. The prevalence of a second canal is higher in mandibular lateral incisors than in mandibular central incisors. There was no direct relationship between voxel size (0.125–0.3 mm) and increased prevalence of a second canal.