Uptake of nanoparticles from sunscreen physical filters into cells arising from increased environmental microwave radiation: increased potential risk of the use of sunscreens to human health

This study examines the microwave chemical risks posed by photocatalysts present in sunscreens (physical filters) against the increasing use of microwaves (radio waves) in the environment, sometimes referred to as electronic smog. Specifically, the study assesses the damage caused by silica-coated physical filters (photocatalysts, TiO_2⋅ and/or ZnO) contained in commercially available sunscreens and fresh silica-coated ZnO for sunscreens to mouse skin fibroblasts cells (NIH/3T3) evaluated in vitro by the life/death of cells using two types of electromagnetic waves: UV light and microwave radiation, and under simultaneous irradiation with both UV light and microwaves. Conditions of the electromagnetic waves were such as to be of lower light irradiance than that of UVA/UVB radiation from incident sunlight, and with microwaves near the threshold power levels that affect human health. The photocatalytic activity of the physical filters was investigated by examining the degradation of the rhodamine B (RhB) dye in aqueous media and by the damage caused to DNA plasmids from E. coli. Compared to the photocatalytic activity of ZnO and TiO₂ when irradiated with UV light alone, a clear enhanced photocatalytic activity was confirmed upon irradiating these physical filters concurrently with UV and microwaves. Moreover, the uptake of these metal oxides into the NIH/3T3 cells led to the death of these cells as a result of the enhanced photocatalytic activity of the metal oxides on exposure to microwave radiation.

Are Titania Photocatalysts and Titanium Implants Safe? Review on the Toxicity of Titanium Compounds

Titanium and its compounds are broadly used in both industrial and domestic products, including jet engines, missiles, prostheses, implants, pigments, cosmetics, food, and photocatalysts for environmental purification and solar energy conversion. Although titanium/titania-containing materials are usually safe for human, animals and environment, increasing concerns on their negative impacts have been postulated. Accordingly, this review covers current knowledge on the toxicity of titania and titanium, in which the behaviour, bioavailability, mechanisms of action, and environmental impacts have been discussed in detail, considering both light and dark conditions. Consequently, the following conclusions have been drawn: (i) titania photocatalysts rarely cause health and environmental problems; (ii) despite the lack of proof, the possible carcinogenicity of titania powders to humans is considered by some authorities; (iii) titanium alloys, commonly applied as implant materials, possess a relatively low health risk; (iv) titania microparticles are less toxic than nanoparticles, independent of the means of exposure; (v) excessive accumulation of titanium in the environment cannot be ignored; (vi) titanium/titania-containing products should be clearly marked with health warning labels, especially for pregnant women and young children; (vi) a key knowledge gap is the lack of comprehensive data about the environmental content and the influence of titania/titanium on biodiversity and the ecological functioning of terrestrial and aquatic ecosystems.

Materials Science Challenges in Skin UV Protection: A Review

UV radiation is one of the critical environmental stress factors for human skin, which can trigger various problems such as pruritus, burning, erythema, premature skin aging and skin cancer. Hence, UV protection has become an indispensable daily routine and the use of topical sunscreen products is rapidly increasing. However, there are emerging concerns over the efficiency and safety of existing chemical and physical UV filters used in consumer products. Furthermore, there is no universally approved method for assessing sun protection efficiency regardless of the immediate end user need to develop safer sunscreen products that afford broad-spectrum photoprotection. It is evident that the current organic and inorganic UV filters have significant unfavorable impacts on human, environmental, and marine safety. Therefore, effective alternative UV filters should be established. This article comprehensively reviews the properties, safety, health and ecological concerns of various UV filters including TiO₂ and ZnO nanoparticles as well as the limitations of the testing protocols and guidelines provided by major regulatory bodies. The photoreactivity of UV filters used in sunscreen remains a major challenge, and it is crucial to develop new sunscreen ingredients, which not only protect the consumer, but also the environment.

Characterization of titanium dioxide nanoparticle removal in simulated drinking water treatment processes

This study characterized the fate of nano-TiO₂ in both powder (TiO₂(P)) and suspension (TiO₂(S)) forms in simulated drinking water treatments. Nano-TiO₂ solutions of 0.1, 1.0, and 10mg/L were prepared with deionized water and raw waters from the Changxing and Fengshan Water Treatment Plants in Taiwan to assess the effects of water matrices on nano-TiO₂ behavior during water treatment. After the laboratory simulated water treatment, including pre-chlorination, coagulation, sedimentation, filtration and post-chlorination, the residual Ti concentration ranged from 2.7 to 47.4% in different treatment units and overall removal efficiency was between 52.6% and 97.3% in all cases except for nano-TiO₂ at concentration of 0.1mg/L. Overall removal efficiency for the TiO₂ at 10mg/L concentration ranged from 9.3 to 53.5%. Sedimentation (after coagulation) and filtration were the most important processes for removing nano-TiO₂ due in part to particle agglomeration, which was confirmed by size distribution and zeta potential measurements. The size of nano-TiO₂ increased from 21-36nm to 4490nm in the supernatant after sedimentation, and subsequent filtration treatment further removed all agglomerates at size >1μm. Zeta potential revealed interactions between nano-TiO₂ particles and anionic functional groups or negatively-charged natural organic matters, leading to a decrease in surface charge. After sedimentation and filtration, the zeta potential of supernatants and filtrates were close to zero, meaning the absence of nanoparticles. The highest Ti removal after sedimentation occurred in Fengshan raw water due to higher ionic strength and coagulant dosage applied. On the other hand, the surfactant additives in TiO₂(S) promoted dispersion of nano-TiO₂ particles, which in turn led to lower particle removal. SEM images of nanoparticles after chlorination or coagulation revealed the coverage of nano-TiO₂ particles by viscous substances and formation of colloidal structures.

Reactive CeO2 nanofluids for UV protective films

We investigate surface modification by organo-trimethoxysilanes of nano-ceria and if such surface-modified nano-ceria can be transformed into solvent-free nanofluids. We also examine whether simultaneous modification with ionic liquid salts and with acrylate groups yields nanofluids suitable for forming UV-protective films and clear coatings by UV-initiated polymerization. Nominally 3nm diameter CeO₂ was successfully synthesized and surface decorated with an ionic liquid salt and with acrylate groups to produce a core/shell structured solvent-free nanofluid after ion exchange of chloride for a soft polyoxyethylene sulfonate anion. This room temperature nanofluid melts at about -10°C and exhibits a glass transition at about -71°C. The melting enthalpy, about 19J/g, corresponds approximately to the gain in surface free energy of such nanofluid particles upon transforming from the solid state to liquid state. Robust films were made by UV photoinitiation of this nanofluid in combination with ethylene glycol dimethacrylate and with a polyoxyethylene diacrylate to yield cross-linked films with absorption coefficients α_350nm=6.6±0.8cm²/mg and α_300nm=24.5±3.5cm²/mg. Average near UV protection over 300-350nm of 1-3 optical density units can be obtained with 0.065-0.19mg/cm² of CeO₂. These materials appear almost three-fold more effective, per unit ceria, than previously reported clearcoats of nanoceria.

Enzyme-mimetic activity of Ce-intercalated titanate nanosheets

Colloidal solutions of Ce-doped titanate nanosheets (Ce-TNS) with tiny dimensions (<10 nm) were fabricated through a hydrolysis reaction of titanium tetraisopropoxide and Ce(NO3)3, and their annihilation activity for reactive oxygen species (ROS) was investigated. The obtained Ce-TNS had an akin crystal structure to layered tetratitanate (Ti4O9(2-)) and Ce ions occupied interlayer space between the host layers with a negative charge. The Ce-TNS possessed a superoxide dismutase (SOD) mimetic activity for disproportionation of superoxide anion radicals (O2(-)) as target ROS. It was explained that the annihilation of O2(-) caused a valence fluctuation of Ce ions existing in the interlayer. Moreover, the activity of Ce-TNS exceeded that of CeO2 nanoparticles recently attracting much attention as an inorganic SOD mimic. The superior performance was explained mainly by a high dispersion stability of the Ce-TNS bringing about a huge reaction area. Moreover, the Ce-TNS protected DNA molecules from ultraviolet light induced oxidative damage, demonstrating effectiveness as one of the new inorganic protecting agents for biomolecules and tissues.

Nanotechnology in dermatology

The scientific community and general public have been exposed to a series of achievements attributed to a new area of knowledge: Nanotechnology. Both abroad and in Brazil, funding agencies have launched programs aimed at encouraging this type of research. Indeed, for many who come into contact with this subject it will be clear the key role that chemical knowledge will play in the evolution of this subject. And even more, will see that it is a science in which the basic structure is formed by distilling different areas of inter-and multidisciplinary knowledge along the lines of new paradigms. In this article, we attempt to clarify the foundations of nanotechnology, and demonstrate their contribution to new advances in dermatology as well as medicine in general. Nanotechnology is clearly the future.

In vitro genotoxic effects of ZnO nanomaterials in human peripheral lymphocytes

In this study, possible genotoxic effects of zinc oxide (ZnO) nanoparticles were investigated in cultured human peripheral lymphocytes by using chromosome aberrations and micronucleus assays (MN). For this purpose, the cells were treated with ZnO (1, 2, 5, 10, 15 and 20 μg/mL) for 24 and 48 h. In this research, four types of chromosome aberrations were observed as chromatid and chromosome breaks, fragment and dicentric chromosomes. ZnO induced significant increase of the ratio of chromosomal aberrations as well as percentage of abnormal cells at concentrations of 1, 5, 10 and 20 μg/mL in 24 h treatments. In 48 h treatments, while ZnO nanomaterials induced significant increase of the percentage of abnormal cells only at a concentration of 10 μg/mL, and of chromosome aberration per cell in comparison to the control at concentrations of 5 and 10 μg/mL. On the other hand, this material significantly increased the micronuclei frequency (MN) at concentrations of 10 and 15 μg/mL in comparison to the control. Cytokinesis-block proliferation index was not affected by ZnO treatments. It also decreased the mitotic index in all concentrations at 24 h but not at 48 h. The present results indicate that ZnO nanoparticles are clastogenic, mutagenic and cytotoxic to human lymphocytes in vitro at specific concentrations and time periods.

In vivo imaging of immune cell dynamics in skin in response to zinc-oxide nanoparticle exposure

Zinc oxide (ZnO) nanoparticles (NPs) are widely used in cosmetic and sunscreen products which are applied topically to the skin. Despite their widespread use, the safety and biological response of these particles remains an active area of investigation. In this paper we present methods based on in vivo multiphoton microscopy (MPM) in skin to address relevant questions about the potential toxicity and immunological response of ZnO NPs. Registration of time-lapse volumetric MPM images allows the same skin site to be tracked across multiple days for visualizing and quantifying cellular and structural changes in response to NP exposure. Making use of the unique optical properties of ZnO enables high contrast detection of the NPs in the presence of strong autofluorescence and second harmonic generation (SHG) background from the skin. A green fluorescent protein (GFP) bone marrow (BM) transplanted mouse model is used to visualize and assess the dynamic response of BM-derived immune cells. These cells are visualized to assess the potential for ZnO NPs to interact with immune cells and elicit an immune reaction in skin. We investigate both topical and dermal exposure of the ZnO NPs. The methods and findings presented in this paper demonstrate a novel approach for tracking ZnO NPs in vivo and for visualizing the cellular response of the exposed tissue to assess the immunological response and potential toxicity of these particles.

Associations between environmental factors and incidence of cutaneous melanoma. Review

BACKGROUND

Cutaneous melanoma is one of the most serious skin cancers. It is caused by neural crest-derived melanocytes - pigmented cells normally present in the epidermis and, sometimes, in the dermis.

METHODS

We performed a review of current knowledge on the risk factors of cutaneous melanoma. Relevant studies were identified using the PubMed, Science Direct, Medline, Scopus, Scholar Google and ISI Web of Knowledge databases.

RESULTS

Melanoma incurs a considerable public health burden owing to the worldwide dramatic rise in incidence since the mid-1960s. Ultraviolet radiation exposure is the predominant environmental risk factor. The role of geographical (latitude) and individual factors such as skin type, life style, vitamin D levels and antioxidant protection, sunburn, and exposure to other environmental factors possibly contributing to melanoma risk (such as cosmetics including sunscreen, photosensitising drugs, and exogenous hormones) are reviewed in this article. Recently, both rare high risk susceptibility genes and common polymorphic genes contributing to melanoma risk have been identified.

CONCLUSIONS

Cutaneous melanoma is a complex cancer with heterogeneous aetiology that continues to increase in incidence. Introduction of new biomarkers may help to elucidate the mechanism of pathogenesis and individual susceptibility to the disease, and make both prevention and treatment more effective.

Current sunscreen controversies: a critical review

BACKGROUND/PURPOSE

Sunscreens are believed to be a valuable tool in providing photoprotection against the detrimental effects of UV radiation, a known carcinogen. However, a number of controversies have developed regarding their safety and efficacy. This review summarizes the relevant studies surrounding these controversies.

METHODS

Evidence of the prevention of skin cancer, an oft-cited reason for sunscreen use, was examined as it pertains to squamous cell carcinoma, basal cell carcinoma and melanoma. We also reviewed studies examining the effects of sunscreen on the synthesis of vitamin D, an essential nutrient whose role in health and disease continues to grow. Lastly, we analyzed studies surrounding the safety and toxicity of oxybenzone, retinyl palmitate and nanoparticles of zinc oxide (ZnO) and titanium dioxide (TiO2 ).

RESULTS

The overwhelming majority of available data is drawn from studies conducted using antiquated sunscreen formulations. Nonetheless, our research revealed that topical use of sunscreen protects against squamous cell carcinoma, does not cause vitamin D deficiency/insufficiency in practice and has not been demonstrated to adversely affect the health of humans.

CONCLUSION

Given the established benefits of UV protection, the use of sunscreens remains an important part of an overall photoprotective strategy. Future sunscreens with improved formulation should ideally offer superior protection. With increased usage of sunscreen by the public, continuous and vigilant monitoring of the overall safety of future products is also needed.

Zinc oxide nanoparticles in modern sunscreens: an analysis of potential exposure and hazard

Sunscreens containing metal oxide nanoparticles appear transparent on the skin and provide excellent protection against sunburn caused by UV radiation. While it is likely that nanoparticles remain on the surface of the skin of healthy adult humans, and thus are considered safe for use in sunscreens, there has been no comprehensive assessment of the impact on human health from exposure to the metal oxide nanoparticles destined for use in sunscreens, either in the workplace during the manufacturing process, in long-term use across a range of skin conditions, or upon release into the broader environment, either accidentally or consequent of normal sunscreen use. In this review, we focus on zinc oxide nanoparticles destined for use in modern sunscreens, and discuss the potential for human exposure and the health hazard at each stage of their manufacture and use. We highlight where there is a need for further research.

DNA damage photoinduced by titanium dioxide in the presence of anionic vesicles under uv illumination: influence of sodium chloride concentration

The DNA damage caused by TiO2 under in vitro conditions by UV-A exposure in the presence of anionic vesicles of Aerosol OT (AOT) was investigated. The supercoiled form (S) in DNA plasmids was converted to the linear form (L) via the relaxed form (R). The DNA damage was slower in the presence of AOT vesicles prepared in aqueous NaCl solution. Moreover, the presence of AOT vesicles in solution after 6 h of UV irradiation was confirmed with an optical microscope. Probably, a fraction of the DNA was protected by random trapping during sonication. However, the addition of NaCl needed for the vesicle formation can decrease the TiO2 activity. On the other hand, in the absence of vesicles the NaCl concentration led to a profound influence on the adsorption of DNA onto the TiO2 surface. During UV irradiation, the degradation rate of DNA increased with increasing the salt concentration. Solutions containing vesicles were prepared at various NaCl concentrations between 10 mM and 75 mM. Consequently, the salt concentration had no significant effect on the DNA damage. The presence of NaCl can play a deleterious role during the photoinduced process. However, the encapsulation of a fraction of DNA is not excluded. In such conditions, the DNA could be protected against the reactive oxygen species.

DNA Damage Upon UV Illumination in the Presence of Inorganic UV-Shielding Materials

White nanoparticles of calcia-doped ceria were prepared from the precipitate by reacting CeCl3-CaCl2 mixed solution with NaOH solution at pH 12 and the oxidation with hydrogen peroxide solution at 40oC, followed by the calcination at 700oC for 1 h. Ceria particles generated far less singlet oxygen and caused far less damage to the DNA plasmids upon UV illumination than either the titania or the zinc oxide reference pigments.