Development of a simultaneous electrorotation device with microwells for monitoring the rotation rates of multiple single cells upon chemical stimulation

Here, we described a unique simultaneous electrorotation (ROT) device for monitoring the rotation rate of Jurkat cells via chemical stimulation without fluorescent labeling and an algorithm for estimating cell rotation rates. The device comprised two pairs of interdigitated array electrodes that were stacked orthogonally through a 20 μm-thick insulating layer with rectangular microwells. Four microelectrodes (two were patterned on the bottom of the microwells and the other two on the insulating layer) were arranged on each side of the rectangular microwells. The cells, which were trapped in the microwells, underwent ROT when AC voltages were applied to the four microelectrodes to generate a rotating electric field. These microwells maintained the cells even in fluid flows. Thereafter, the ROT rates of the trapped cells were estimated and monitored during the stimulation. We demonstrated the feasibility of estimating the chemical efficiency of cells by monitoring the ROT rates of the cells. After introducing a Jurkat cell suspension into the device, the cells were subjected to ROT by applying an AC signal. Further, the rotating cells were chemically stimulated by adding an ionomycin (a calcium ionophore)-containing aliquot. The ROT rate of the ionomycin-stimulated cells decreased gradually to 90% of the initial rate after 30 s. The ROT rate was reduced by an increase in membrane capacitance. Thus, our device enabled the simultaneous chemical stimulation-induced monitoring of the alterations in the membrane capacitances of many cells without fluorescent labeling.

On-chip integrated optical stretching and electrorotation enabling single-cell biophysical analysis

Cells have different intrinsic markers such as mechanical and electrical properties, which may be used as specific characteristics. Here, we present a microfluidic chip configured with two opposing optical fibers and four 3D electrodes for multiphysical parameter measurement. The chip leverages optical fibers to capture and stretch a single cell and uses 3D electrodes to achieve rotation of the single cell. According to the stretching deformation and rotation spectrum, the mechanical and dielectric properties can be extracted. We provided proof of concept by testing five types of cells (HeLa, A549, HepaRG, MCF7 and MCF10A) and determined five biophysical parameters, namely, shear modulus, steady-state viscosity, and relaxation time from the stretching deformation and area-specific membrane capacitance and cytoplasm conductivity from the rotation spectra. We showed the potential of the chip in cancer research by observing subtle changes in the cellular properties of transforming growth factor beta 1 (TGF-β1)-induced epithelial-mesenchymal transition (EMT) A549 cells. The new chip provides a microfluidic platform capable of multiparameter characterization of single cells, which can play an important role in the field of single-cell research.

3D cell electrorotation and imaging for measuring multiple cellular biophysical properties

3D rotation is one of many fundamental manipulations to cells and imperative in a wide range of applications in single cell analysis involving biology, chemistry, physics and medicine. In this article, we report a dielectrophoresis-based, on-chip manipulation method that can load and rotate a single cell for 3D cell imaging and multiple biophysical property measurements. To achieve this, we trapped a single cell in constriction and subsequently released it to a rotation chamber formed by four sidewall electrodes and one transparent bottom electrode. In the rotation chamber, rotating electric fields were generated by applying appropriate AC signals to the electrodes for driving the single cell to rotate in 3D under control. The rotation spectrum for in-plane rotation was used to extract the cellular dielectric properties based on a spherical single-shell model, and the stacked images of out-of-plane cell rotation were used to reconstruct the 3D cell morphology to determine its geometric parameters. We have tested the capabilities of our method by rotating four representative mammalian cells including HeLa, C3H10, B lymphocyte, and HepaRG. Using our device, we quantified the area-specific membrane capacitance and cytoplasm conductivity for the four cells, and revealed the subtle difference of geometric parameters (i.e., surface area, volume, and roughness) by 3D cell imaging of cancer cells and normal leukocytes. Combining microfluidics, dielectrophoresis, and microscopic imaging techniques, our electrorotation-on-chip (EOC) technique is a versatile method for manipulating single cells under investigation and measuring their multiple biophysical properties.