Femoral Periprosthetic Fractures after Total Knee Arthroplasty: New Surgically Oriented Classification with a Review of Current Treatments

Retrograde Intramedullary Nailing Versus Locked Plating for Extreme Distal Periprosthetic Femur Fractures: A Multicenter Retrospective Cohort Study

OBJECTIVES

To compare clinical and radiographic outcomes after retrograde intramedullary nailing (rIMN) versus locked plating (LP) of "extreme distal" periprosthetic femur fractures, defined as those that contact or extend distal to the anterior flange.

METHODS

DESIGN

Retrospective review.

SETTING

Eight academic level I trauma centers.

PATIENT SELECTION CRITERIA

Adult patients with periprosthetic distal femur fractures at or distal to the anterior flange (OTA/AO 33B-C[VB1]) treated with rIMN or LP.

OUTCOME MEASURES AND COMPARISONS

The primary outcome was reoperation to promote healing or to treat infection (reoperation for elective removal of symptomatic hardware was excluded from this analysis). Secondary outcomes included nonunion, delayed union, fixation failure, infection, overall reoperation rate, distal femoral alignment, and ambulatory status at final follow-up. Outcomes were compared between patients treated with rIMN or LP.

RESULTS

Seventy-one patients treated with rIMN and 224 patients treated with LP were included. The rIMN group had fewer points of fixation in the distal segment (rIMN: 3.5 ± 1.1 vs. LP: 6.0 ± 1.1, P < 0.001) and more patients who were allowed to weight-bear as tolerated immediately postoperatively (rIMN: 45%; LP: 9%, P < 0.01). Reoperation to promote union and/or treat infection was 8% in the rIMN group and 16% in the LP group ( P = 0.122). There were no significant differences in nonunion ( P > 0.999), delayed union ( P = 0.079), fixation failure ( P > 0.999), infection ( P = 0.084), or overall reoperation rate ( P > 0.999). Significantly more patients in the rIMN group were ambulatory without assistive devices at final follow-up (rIMN: 35%, LP: 18%, P = 0.008).

CONCLUSIONS

rIMN of extreme distal periprosthetic femur fractures has similar complication rates compared with LP, with a possible advantage of earlier return to weight-bearing. Surgeons can consider this treatment strategy in all fractures with stable implants and amenable prosthesis geometry, even extreme distal fractures.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Periprosthetic distal femur fractures around total knee replacements: A comprehensive review

With a growing number of patients undergoing total knee replacements globally, coupled with an elderly population, the incidence of periprosthetic fractures around total knee replacements is increasing. As such, this is a highly topical subject that is gaining increasing interest within the orthopaedic community. This review provides a narrative synthesis of the most contemporary literature regarding distal femoral periprosthetic fractures. We review the related epidemiology, initial patient evaluation, the evolution and relevance of the classification systems and treatment options, particularly related to endoprosthetics and hybrid fixation constructs. The latest orthopaedic evidence related to this topic has been included.

Modified fixation for periprosthetic supracondylar femur fractures: Two case reports and review of the literature

BACKGROUND

Periprosthetic supracondylar femoral fractures (PSFs) present a challenge in terms of optimizing fixation in patients with poor bone quality. Surgical treatment and peri-operative management of PSFs in the elderly remain a burden for orthopedic surgeons. Among different treatment options, locking plate (LP) and retrograde intramedullary nail (RIMN) have shown favorable results. However, reduced mobility and protected weight-bearing are often present in the postoperative older population. With a purpose of allowing for early weight-bearing, a modified nail plate combination (NPC) was redesigned for PSF management.

CASE SUMMARY

In our cases, two elderly osteoporotic female underwent total knee arthroplasty (TKA), and then suffered from low energy trauma onto their knees after falling to the floor. Plain radiographs or computed tomography scans demonstrated oblique or transverse PSFs, both of which occurred at the distal femur above TKA. The modified NPC technique was performed for treatment of PSFs. The patient was made foot flat weight bearing in 1 wk. At 6-mo follow-up, the union was ultimately achieved using modified NPC with satisfactory implant outcomes.

CONCLUSION

Neither LP nor RIMN alone may provide adequate support to allow for union in circumstances where the patient has severely osteopenic bone. Therefore, developing a modified implant offer an alternative choice for treating PSFs. These two cases revealed that this technique is a viable option for the geriatric osteoporotic PSFs, offering safe, early weight bearing and favorable clinical outcomes.

Fixed distal femoral resection with a valgus cutting angle of 3° is more appropriate in intra-articular valgus deformity than juxta-articular valgus deformity in total knee arthroplasty: a retrospective single center study

Background

The traditionally recommended fixed valgus cutting angle (VCA) of 3° is used as the standard method in total knee arthroplasty (TKA) for valgus deformity. The accuracy of distal femur cutting can be affected by the type of valgus deformity because the intramedullary rod for distal femoral resection can become impinged on the femoral cortex. The purpose of this study is to analyze the accuracy and precision of a VCA of 3° in mechanical alignment in TKA for valgus deformity, based on the type of the deformity.

Methods

TKAs with a fixed VCA of 3° performed in 110 intra-articular and 102 juxta-articular valgus knees were retrospectively reviewed. The age (65.8 vs. 66.1 years), sex (female: male =78/32 vs. 70/32), body mass index (26.0 vs. 26.0), and severity of deformities (valgus 12.1 vs. valgus 12.5) were not significantly different (P>0.647). The mechanical-lateral-distal-femoral angle (mLDFA) and anatomical-mechanical-axis angle (AMA-A) were evaluated. The adjusted-VCA (aVCA) was defined as the maximum angle within the range without the intramedullary rod impinging on the femoral cortex. The proportion of well-aligned femoral component (mLDFA <90°±3°) was assessed. The correlation between AMA-A-3° or aVCA-3° and postoperative mLDFA-90° was analyzed.

Results

Despite the larger AMA-A in the juxta-articular group (6.2° vs. 6.8°, P<0.001), the aVCA was lesser in the juxta-articular group (5.4° vs. 4.1°, P<0.001). The mLDFA was more varus in the intra-articular group (91.7° vs. 90.6°, P<0.001) postoperatively. The proportion of well-aligned femoral component was higher in the juxta-articular group (85.3% vs. 70%, P=0.009). Postoperative mLDFA-90° was moderately correlated with aVCA-3° (r=0.301, r=387), but weakly correlated with AMA-A-3° (r=0.274, r=294) in both groups.

Conclusions

Although a fixed VCA of 3° is a reliable method in achieving mechanical alignment in valgus deformity, it can be more appropriate in juxta-articular deformity than in intra-articular deformity. The aVCA is a more reasonable predictor of femoral component alignment than the AMA-A, considering the femoral cortex impingement of the intramedullary rod.

New Classification for Periprosthetic Distal Femoral Fractures Based on Locked-Plate Fixation Following Total Knee Arthroplasty: A Multicenter Study

BACKGROUND

This study aimed to establish a new classification using locked-plate fixation for periprosthetic distal femoral fracture (PDFF) following total knee arthroplasty (TKA) and to determine when dual locked-plate fixation is necessary through defining this classification.

METHODS

One-hundred fifteen consecutive PDFFs that underwent operative treatment were reviewed from 2011 to 2019 with minimum 1-year follow-up. Most PDFFs were fixed with single or dual locked-plate fixations using the minimally invasive plate osteosynthesis technique. Based on preoperative radiographs, PDFFs were classified according to the level of main fracture line relative to the anterior flange of femoral component: type I and II, main fracture line located proximal and distal to the anterior flange; and type III, component instability regardless of fracture line requiring revisional TKA. Furthermore, type II fractures were subclassified based on the direction of fracture beak as follows: type II_L, lateral-beak; type II_M, medial-beak. The incidence, treatment methods, and complications were analyzed according to the classification.

RESULTS

Incidences of type I, II_L, II_M, and III were 64.4%, 8.7%, 24.3%, and 2.6%, respectively. Meanwhile, most PDFFs in type I and II were treated with lateral single locked-plate fixations, except for type II_M, which was treated with either single or dual locked-plate fixations. Overall complications were significantly higher in type II (28.9%) than in type I (10.8%, P = .019). In type II_M, bone union-related complications were significantly higher in single locked-plate fixation (50.0%) than in dual locked-plate fixation (5.6%; P = .013).

CONCLUSION

The new classification provides practical and obvious strategies for the treatment of PDFF following TKA using locked-plate fixation. For type II_M fracture, dual plate fixation is necessary to prevent fixation failure or nonunion.

Anterior femoral notching ≥ 3 mm is associated with increased risk for supracondylar periprosthetic femoral fracture after total knee arthroplasty: a systematic review and meta-analysis

PURPOSE

Anterior femoral notching (AFN) may be associated with a higher risk for supracondylar periprosthetic fracture (sPPF) after total knee arthroplasty (TKA), although studies have yielded inconclusive results. We aimed to systematically investigate and meta-analyze the best available evidence regarding the association between AFN and the risk of sPPF after TKA.

METHODS

A comprehensive search of PubMed, Scopus, Mendeley, Google Scholar and Cochrane databases was performed, from conception to February 29, 2020. Data were expressed as odds ratio (OR) with 95% confidence intervals (CI). I²-index was employed for heterogeneity. Newcastle-Ottawa scale was implemented for quality assessment of the included studies.

RESULTS

Nine studies fulfilled the eligibility criteria, including a total of 3264 patients subjected to TKA. Among them, there were 150 patients who sustained a sPPF. Overall, patients exposed to AFN (AFN group) demonstrated an increased risk for sPPF compared to those not exposed (control group) (OR 3.91, 95% CI 1.22-12.58, p = 0.02; I² 68.52%). Subgroup analysis based on AFN depth with a cut-off value of 3 mm further clarified this association. Patients with AFN ≥ 3mm were at higher risk for sPPF compared to patients with AFN < 3 mm and control group (OR 4.85, 95% CI 2.08-11.33, p = 0.00; I² 0.0%). On the contrary, fracture risk was not significant for patients with AFN < 3 mm compared to the control group (OR 5.0, 95% CI 0.44-56.82, p = 0.19; I² 42.99%).

CONCLUSION

Patients, exposed to AFN ≥ 3 mm in depth, are at higher risk for sustaining a sPPF.

Underestimation and undertreatment of osteoporosis in patients awaiting primary total knee arthroplasty

INTRODUCTION

Osteoporosis is generally regarded as a risk factor for periprosthetic fracture during or after primary total knee arthroplasty (TKA). Despite this, little is known about osteoporosis in patients undergoing elective primary TKA Therefore, we sought to investigate the prevalence of osteoporosis and rates of pharmacologic osteoporosis treatment prior to primary TKA. We hypothesized that preoperative osteoporosis is underestimated and undertreated in the primary TKA population.

MATERIALS AND METHODS

This retrospective study included consecutive 1972 patients scheduled for elective primary TKA at a single tertiary hospital (age, 50-89 years). Charts were reviewed for patient demographics, prior pharmacologic osteoporosis treatment and Knee Society (KS) scoring system and WOMAC score. Dual energy X-ray absorptiometry (DEXA) measurement of the lumbar vertebrae and proximal femur was performed in all patients on the day before surgery. The associations of BMD with age, sex, body mass index (BMI), and clinical outcome were analyzed.

RESULTS

The prevalence of osteoporosis was 50.0% (53.4% in women and 7.0% in men). Among patients with osteoporosis, only 15.1% (149/986) of patients (15.0% in women and 30.0% in men) had pharmacological osteoporosis treatment prior to primary TKA. Age, sex and WOMAC stiffness showed association with osteoporosis. Sex (odds ratio (OR): 20.83, p < 0.001) was the most significant factor associated with osteoporosis.

CONCLUSION

Osteoporosis was highly prevalent in patients awaiting TKA, but the rates of diagnosis and pharmacologic osteoporosis treatment were low. Therefore, more attention needs to estimate and treat osteoporosis in patients awaiting primary TKA, especially in female patients.

The inverted Vancouver C fracture. Case series of unstable proximal femur fractures above a knee revision stem treated by short cephalomedullary nail and lateral submuscular overlapping plate

Unstable proximal femur fractures above a knee revision stem are an emerging complication that is especially difficult to treat. Since this pattern does not adapt to any previously reported classification, we named it "inverted Vancouver C fracture". In this single-centre case series, we pose a nail-plate combination for the treatment of such clinical picture. The incidence was low among proximal and implant-related femoral fractures. All the fractures healed without records of major local complications. Thus, we consider this technique safe and reproducible.

Early fixation failure of locked plating in complex distal femoral fractures: Root causes analysis

BACKGROUND/PURPOSE

Orthopaedic Trauma Association (OTA) C-type distal femoral fractures can be very challenging to treat effectively. While locked plating is widely used in the complex distal femoral fracture, failure of locked plate fixation is not uncommon. First, we tried to determine the risk factor related to early failure of multiplanar OTA C-type fracture in the distal femur after fixation with lateral locked plate. Second, we tried to provide a strategy for surgeons to prevent pitfalls of early failure in the complex distal femoral fractures treated with lateral locked plating.

METHODS

We retrospectively reviewed 44 adults with OTA C-type fractures of the distal femur treated with locked plate fixation between 2010 and 2016 at Tri-Service General Hospital. Average length of follow-up was 27.6 months (range, 12-54 months). Univariate and multivariate logistic regression were used to determine the association of variables on early failure of fixation. A p-value < 0.05 in univariate and multivariate analyses were considered significant.

RESULTS

There were six patients experiencing early failure, and the early failure rate was 13.6%. The risk factors associated with early failure of complex distal femoral fracture identified by univariate analysis included sagittal oblique fracture pattern, longer working length and post-operative sagittal malalignment (odds ratio [OR] and 95% confidence intervals [CI]: 90.00 (6.85-1183.33), 0.55 (0.31-0.98) and 8.63 (1.077-69.075) respectively). The multivariate analysis showed only sagittal oblique fracture pattern was associated with early failure [OR: 52.348 (3.06-895.23)].

CONCLUSION

Sagittal oblique fracture was more likely to result in early postoperative failure. Early recognition of the fracture pattern should be considered to avoid catastrophic results.

[Periprosthetic fractures around the knee]

BACKGROUND

Periprosthetic fractures of the knee joint are complex injuries and frequently represent a challenge for the surgeon.

OBJECTIVE

The aim of this review is to present and discuss the current classification and treatment options for periprosthetic knee fractures.

MATERIAL AND METHODS

A selective review of the existing literature on periprosthetic fractures around the knee was performed in PubMed. The various classifications and treatment regimens are discussed with respect to the advantages and disadvantages and from this knowledge a new algorithm was developed.

RESULTS

The classifications of periprosthetic fractures have changed in recent years and have been replaced by a uniform fracture classification; however, not only the radiological evaluation of the fractures is crucial to determine the treatment regimen for periprosthetic fractures. A thorough evaluation of the inserted endoprosthesis should be carried out in order to be able to decide between the treatment options of osteosynthesis and revision arthroplasty. Treatment options are available for osteosynthesis and revision arthroplasty that enable a safe treatment of these complex injuries.

CONCLUSION

Periprosthetic fractures of the knee joint are complex injuries, requiring a thorough preoperative planning and an interdisciplinary treatment with trauma and endoprosthetic expertise.

Previous Implant Fractures: A New Descriptive Classification System

OBJECTIVES

To propose a previous implant fractures (PIFs) classification system with good interobserver reliability.

DESIGN

Retrospective classification.

SETTING

Four academic medical centers.

PATIENTS/PARTICIPANTS

A retrospective review of PIFs treated at 4 academic medical centers over 10 years was performed. Data collected included initial implant and PIF radiographs. There were 103 PIFs in 96 patients during the study period. Seventy-three (70.9%) were about plate/screw (PS) constructs and 30 (29.1%) were about intramedullary (IM) devices.

INTERVENTION

Assignment of PIF classification.

MAIN OUTCOME MEASUREMENTS

PIFs were classified based on initial implant (PS or IM) and fracture location with respect to the initial implant (proximal or distal to the implant, at the tip of the construct, or within the construct). Reliability of this scheme was assessed among 5 observers using Fleiss' kappa tests.

RESULTS

Of PIFs about plate/screw constructs, 26.0% were proximal/distal to the implant (classification: PS1), 57.5% involved bone between the most proximal/distal screw and the same end of the plate (classification: PS2), and 16.4% involved only bone between the most proximal and distal screws (classification: PS3). Of PIFs about IM, 43.3% were distal to the device (classification: IM1), 46.7% involved bone between the most proximal/distal locking bolt and the same end of the device (classification: IM2), and 10.0% involved only bone between locking bolts (classification: IM3). Interobserver reliability for the classification system was excellent between observers, κ = 0.839, P < 0.0005.

CONCLUSIONS

The proposed system offers a simple method to classify and describe fractures that occur about a previously implanted fracture device. Development of a classification system will allow for comparison of treatment modalities between injury types.