A review on sonoelectrochemical technology as an upcoming alternative for pollutant degradation

Sonoelectrochemical process has emerged as a novel integrated technology for various applications starting from sonoelectroplating till the remediation of a wide range of contaminants. Although a promising new technology, the application of sonoelectrochemical technology for pollutant degradation are mostly on a laboratory scale, utilizing the conventional reactor configuration of the electrolytic vessel and ultrasonic horns dipped in it. This type of configuration has been believed to be responsible for its sluggish evolution with lower reproducibility, scale-up and design aspects. To achieve a major turn with an enhanced synergy, refinements in the form of optimizing the co-ordination of the governing parameters of both the technologies (e.g., power, frequency, liquid height, electrode material, electrode size, electrode gap, applied voltage, current density etc.) have been validated. Besides, in order to supplement knowledge in the already existing pool, rigorous research on the past and present status has been done. Challenges were also identified and to overcome them, critical discussions covering an overview of the progressive developments on combining the two technologies and its major applications on pollutant degradation were conducted.

Current topics on sonoelectrochemistry

Sonoelectrochemistry is undergoing a reemerging activity in the last years with an increasing number of papers appearing in a wide range of peer review journals. Applied studies which cover environmental treatments, synthesis or characterization of nanostructures, polymeric materials synthesis, analytical procedures, films preparations, membrane preparations among other interesting applications have been reviewed. The revised fundamental analyses trying to elucidate the mechanism of the interactions between the ultrasound and electrical fields, are focused on test electrochemical processes, on the use of unconventional solvents and combination with other techniques. After the review of the achievements and faults of sonoelectrochemistry, future research lines are suggested.

Electroreduction of N-methylphthalimide in room temperature ionic liquids under insonated and silent conditions

The selective electroreduction N-methylphthalimide to 3-hydroxy-2-methyl-isoindolin-1-one has been performed in ionic liquids using phenol as a proton donor under silent and ultrasonic conditions. A significant increase in the rate of electroreduction is shown using ultrasonic activation and in addition high current efficiencies were observed. Some decomposition of the ionic liquid was found to have occurred under exposure to ultrasound.

Sonochemistry and sonoprocessing: the link, the trends and (probably) the future

Traditionally the community of scientists involved with ultrasound has been divided broadly into those who use it as a measurement device with no effect on the medium (high frequency low power ultrasound e.g. non-destructive testing) and those who use it to produce physical or chemical effects in a medium (higher power low frequency ultrasound e.g. sonochemistry). Divisions also exist within the broad spectrum of those involved with the latter. In the early days of sonochemistry this did not prove to be a major problem, the subject was new and the field was expanding within the chemistry community. However at a point some years ago Jean-Louis Luche made the very important observation that sonochemistry applications could be subdivided into reactions which were the result of "true" and "false" effects [Synthetic Organic Chemistry by J.-L. Luche, 1998, p. 376]. Essentially these terms referred to real chemical effects induced by cavitation and those effects that could be mainly ascribed to the mechanical impact of bubble collapse. These mechanical effects have not held the interest of synthetic chemists as much as the so-called true ones but nevertheless they are certainly important in areas such as processing. In this paper I will attempt to show that there are links that can be made across many of the ultrasound "disciplines" and that these links can only serve to strengthen research in the general area of power ultrasound. If research on power ultrasound is strong then research into "pure" sonochemistry will also flourish and "false" sonochemistry will be born again as a significant research area.

Advances in the voltammetric analysis of small biologically relevant compounds

The problems associated with attempting to apply voltammetric techniques to the analysis of biologically relevant organics within complex media are identified and, through reviewing the very recent literature (1999-mid-2001), possible solutions are described. The boundaries of the search were limited to research targeted at the resolution of specific problems, associated with quantitative determinations. Various strategies have emerged to counter problems of poor sensitivity and selectivity and these have been summarized and critically appraised. Where possible, the characteristics of each approach have been distilled into a table format to ease comparison. Emphasis has been placed on the collation of information that will improve the intrinsic electrode response and as such should be of value to those interested in pursuing electroanalytical methodologies regardless of context.

Ultrasonic effects on electroorganic processes. Part 17. Product selectivity control in cathodic reduction of acrylonitrile

Product selectivity for adiponitrile, which was formed as the corresponding hydrodimeric product along with propionitrile as the hydromonomeric product in the cathodic reduction of acrylonitrile, was significantly increased under ultrasonic irradiation with an intensity above the ultrasonic cavitation threshold. This ultrasonic effect is rationalized as due to mass transport promotion of acrylonitrile molecules to the cathode surface from the bulk electrolytic solution by high speed jet streams caused by the cavitation. A mechanism for the ultrasonic effect is discussed in detail on the basis of the reaction pathway of the hydrodimerization of acrylonitrile.

Effects of ultrasound on both electrolytic and electroless nickel depositions

The effects of ultrasound on both electrolytic and electroless nickel depositions were investigated by polarization and a.c. impedance methods. The ultrasound accelerated the charge transfer process at the metal-electrolyte interface in the electrodeposition and the mass transport process in the electroless deposition. In the electrodeposition with Watts bath, the crystal orientations of deposited film largely changed in the presence of ultrasound. The imposition of ultrasound gave rise to decreasing cathodic overpotential and increasing exchange current density, and these effects depended upon the ultrasonic frequency. The values of exchange current density estimated from a.c. impedance were dependent upon the measured electrode potentials. In the electroless deposition with citrate bath, the deposition rates increased in the presence of ultrasound. There were two kinds of Ni(2+)-citrate complex which were reduced at -0.7 V and -1.1 V. The electroless deposition process was controlled by the Ni(2+)-citrate complex that was reduced at -0.7 V. This reduction rate was diffusion controlled and largely increased in the presence of ultrasound. The effects of ultrasonic frequency on both electrodeposition and electroless deposition increased in order of no irradiation < 100 kHz < 28 kHz < or = 45 kHz.