Optimization of the QuEChERS-UPLC-APCI-MS/MS method for the analysis of vitamins D and K nanoencapsulated in yogurt

A novel approach was developed to simultaneously determine the contents of vitamins D2, D3, K1, and K2 in yogurt fortified with nanoencapsulated vitamins D and K. This method combines QuEChERS extraction with UPLC-APCI-MS/MS analysis. Optimization of the QuEChERS process included fine-tuning the addition of salts using response surface methodology based on the Box-Behnken design. Under the optimized conditions, the developed method exhibited an excellent linearity (R2 > 0.999) across concentrations ranging from 0.5 to 500 µg/L. The limits of detection and quantification (LOD and LOQ) were found to be 0.01-0.04 µg/L and 0.04-0.11 µg/L, respectively, with precision, accuracy, and recovery rates exceeding 94.88 %, and accompanied by acceptable relative standard deviations. Comparative analysis with traditional methodologies revealed the significant advantages of the proposed approach. Previous techniques such as liquid-liquid extraction combined with saponification are time-consuming and require high sample quantities. In addition, dispersive liquid-liquid microextraction requires a long analysis time and exhibits a poor sensitivity, particularly in terms of its LOD and LOQ values. In contrast, our method offers a straightforward, efficient, and reliable sample preparation technique suitable for detecting vitamins D2, D3, K1, and K2 in a yogurt matrix. This study not only demonstrates the feasibility of applying the QuEChERS method for stable vitamin quantification in yogurt, but it also represents an innovative contribution to enhancing the detection sensitivity and efficiency in food analysis. By emphasizing these methodological advancements and comparative benefits, this research underscores the significance of adopting advanced analytical approaches in food science.

Novel QuEChERS-ultra-performance liquid chromatography-atmospheric-pressure chemical ionization tandem mass spectrometry method for the simultaneous determination of vitamin D and vitamin K in vitamin-fortified nanoemulsions

Nanoemulsion is a new vehicle for food fortification. In this study, a simple and reliable method for the simultaneous analysis of vitamins D₂, D₃, K₁, and K₂ in vitamin-fortified nanoemulsions was developed using QuEChERS (quick, easy, cheap, effective, rugged, and safe) extraction and ultra-high performance liquid chromatography-atmospheric-pressure chemical ionization tandem mass spectrometry techniques. Response surface methodology was employed to optimize the extraction parameters. The method was validated for the vitamins in terms of LOD (0.03-0.25 μg/L), LOQ (0.10-0.77 μg/L), intra-day (≤4.50%), inter-day precisions (≤6.43%), and accuracy (98.5%-108.0%). The recoveries of the vitamin-fortified nanoemulsion and yogurt were in the ranges of 104.0%-109.2% and 73.3%-85.2%, respectively. The solvent consumption and analysis time were reduced by 5.6 and 3.3 folds, respectively, rendering it superior to the traditional extraction methods established by the Association of Official Analytical Chemists and the Ministry of Food and Drug Safety.

Assessment of Regulatory Compliance Testing for Vitamin D in Infant Formula—Impact of Delegated Regulation (EU) 2019/828

Background

Since the publication of Standard Method Performance Requirements (SMPR®) for vitamin D in infant formula (SMPR 2011.004) by AOAC INTERNATIONAL, revised vitamin D limits have been recommended by the European Food Safety Authority (EFSA) for infant formula and adopted in Commission Delegated Regulation (EU) 2019/828. The vitamin D range introduced, 2–2.5 μg/100 kcal, is significantly narrower than previous limits specified by Codex Standard 72–1981 and requires lower method reproducibility metrics to adequately assess regulatory compliance. The narrower limits for vitamin D present a significant challenge for current-generation reference analytical methods that comply with SMPR 2011.004.

Objective

We evaluate the impact of Delegated Regulation (EU) 2019/828 on the demonstrated performance of AOAC Method 2016.05/ISO 20636:2018 to assess the likelihood that vitamin D results produced by the method would be found outside the EU limits when testing infant formula that is compliant as manufactured.

Methods

AOAC Method 2016.05/ISO 20636:2018, specifically data generated during multi-laboratory study, was used as a basis for statistical evaluation of the impact of the narrower EU vitamin D limits.

Results

The review of AOAC Method 2016.05/ISO 20636:2018 method performance against the vitamin D regulatory range introduced in (EU) 2019/828 indicates methods capable of performing in alignment with SMPR 2011.004 are likely to produce results that fail to meet EU requirements.

Conclusions

Our assessment illustrates the high probability that a well-manufactured product with vitamin D levels within the EU regulatory range would fail to meet the regulatory requirements due to analytical method variability when tested using fit-for-purpose methods. Further, required method performance cannot be expected with the future development of new methods. To avoid this, consideration should be given to aligning proposed regulatory limits with method performance metrics of current-generation compendial methods.

Highlights

Current, state-of-the-art methods cannot consistently verify infant formula product compliance for vitamin D in accordance with (EU) 2019/828.