Changes in the Microbiological Characteristics of Korean Native Cattle (Hanwoo) Beef Exposed to Ultraviolet (UV) Irradiation Prior to Refrigeration

Effect of dehydration and pulsed light treatment on decontamination of minced onions: Microbial safety and physicochemical properties

Microbial contamination of dehydrated onion products is a challenge to the industry. The study focused on opting for a suitable drying condition for minced onion and exploring the decontamination efficacy of pulsed light (PL) treatment conditions for the dehydrated product. The minced onions were hot air dried at 55-75°C for 280 min. The drying condition selected was 195 min at 75°C with a final water activity of 0.5 and moisture content of 7% (wet basis [w.b.]). The weight losses, browning indexes (BI), shrinkage volumes (%), and thiosulfinate content were considered. The dehydrated product was exposed to PL treatment corresponding to an effective fluence range of 0.007-0.731 J/cm2. A fluence of 0.444 J/cm2 (1.8 kV for 150 s) achieved 5.00, 3.14, 2.96, and 2.98 log reduction in total plate count, yeast and mold count, Bacillus cereus 10876, and Escherichia coli ATCC 43888, respectively. The PL-treated sample (0.444 J/cm2) produced a microbially safe product with no significant difference in the moisture contents (%w.b.) and water activity (aw) from the untreated dehydrated sample. Further, a 30.9% increase in the BI and a 4.25% depletion in thiosulfinate content were observed after PL treatment. An optimum drying combination (75°C for 195 min) of minced onion followed by decontamination using pulsed light treatment at 0.444 J/cm2 fluence satisfies the microbial safety and quality. PRACTICAL APPLICATION: Dehydrated minced onion can be used for dishes requiring low water content and short cooking time. It is helpful during shortages, high price fluctuations, and famines.

The Application of Ultraviolet Treatment to Prolong the Shelf Life of Chilled Beef

This study simulated the storage conditions of chilled beef at retail or at home, and the sterilization and preservation effects of short-time ultraviolet irradiation were studied. The conditions of different irradiation distances (6 cm, 9 cm, and 12 cm) and irradiation times (6 s, 10 s, and 14 s) of ultraviolet (UV) sterilization in chilled beef were optimized, so as to maximally reduce the initial bacterial count, but not affect the quality of the chilled beef. Then, the preservation effect on the chilled beef after the optimized UV sterilization treatment during 0 ± 0.2 °C storage was investigated. The results showed that UV irradiation with parameters of 6 cm and 14 s formed the optimal UV sterilization conditions for the chilled beef, maximally reducing the number of microorganisms by 0.8 log CFU/g without affecting lipid oxidation or color change. The 6 cm and 14 s UV sterilization treatment of the chilled beef was able to reduce the initial microbial count, control the bacterial growth, and delay the increase in the TVB-N values during storage. Compared with the control group, the total bacterial count decreased by 0.56-1.51 log CFU/g and the TVB-N value decreased by 0.20-5.02 mg N/100 g in the UV-treated group. It was found that the TBARS value of the UV treatment group increased during late storage; on days 9-15 of storage, the TBARS values of the treatment group were 0.063-0.12 mg MDA/kg higher than those of the control group. However, UV treatment had no adverse impact on the pH, color, or sensory quality of chilled beef. These results prove that UV treatment can effectively reduce the microbial count on the surface of beef and improve its microbial safety, thus maintaining the quality of beef and prolonging its shelf life. This study could provide a theoretical basis for the preservation technology of chilled beef in small-space storage equipment.

Blue Light for Inactivation of Meatborne Pathogens and Maintaining the Freshness of Beef

ABSTRACT

Beef is rich in various nutrients but easily spoils due to bacterial contamination; thus, a bactericidal method is needed to inactivate meatborne pathogens while maintaining the freshness of beef. The present study was conducted to investigate for the first time the bactericidal effect of blue light (BL) at 415 nm against four meatborne pathogens (methicillin-resistant Staphylococcus aureus, Escherichia coli, Salmonella Typhimurium, and Listeria monocytogenes) both in vitro and inoculated onto the surface of fresh beef. The populations of the four pathogens on the nonirradiated control beef did not change significantly (P > 0.05), whereas a dose-dependent inactivation effect was found for BL-treated beef both in vitro and in vivo. On the beef cuts, BL at 109.44 J/cm2 inactivated 90% of inoculated cells of the tested strains (P < 0.05), and this inactivation effect was sustained during 7 days of cold storage. Insignificant changes in lipid oxidation rate, water holding capacity, and cooking loss were found during storage between the control beef and the beef irradiated at 109.44 J/cm2 at the same time. BL had a minor and nonsignificant effect on surface color and free amino acid concentrations. The pH of the treated beef increased more slowly (P < 0.05) than did that of untreated beef. These results suggest that BL could be a novel bactericide and could help maintain the freshness of beef.

HIGHLIGHTS

Physical Methods for the Decontamination of Meat Surfaces

Purpose of Review

The market for minimally processed products is constantly growing due to consumer demand. Besides food safety and increased shelf life, nutritional value and sensory appearance also play a major role and have to be considered by the food processors. Therefore, the purpose of the review was to summarize recent knowledge about important alternative non-thermal physical technologies, including both those which are actually applied (e.g. high-pressure processing and irradiation) and those demonstrating a high potential for future application in raw meat decontamination (e.g. pulsed light UV-C and cold plasma treatment). The evaluation of the methods is carried out with respect to efficiency, preservation of food quality and consumer acceptance.

Recent Findings

It was evident that significantly higher bacterial reductions are achieved with gamma-ray, electron beam irradiation and high pressure, followed by pulsed light, UV-C and cold plasma, with ultrasound alone proving the least effective. As a limitation, it must be noted that sensory deviations may occur and that legal approvals may have to be applied for.

Summary

In summary, it can be concluded that physical methods have the potential to be used for decontamination of meat surfaces in addition to common hygiene measures. However, the aim of future research should be more focused on the combined use of different technologies to further increase the inactivation effects by keeping meat quality at the same time.

Effective pretreatment technologies for fresh foods aimed for use in central kitchen processing

The central kitchen concept is a new trend in the food industry, where centralized preparation and processing of fresh foods and the distribution of finished or semi-finished products to catering chains or related units take place. Fresh foods processed by a central kitchen mainly include fruit and vegetables, meat, aquatic products, and edible fungi; these foods have high water activities and thermal sensitivities and must be processed with care. Appropriate pretreatments are generally required for these food materials; typical pretreatment processes include cleaning, enzyme inactivation, and disinfection, as well as packaging and coating. To improve the working efficiency of a central kitchen, novel efficient pretreatment technologies are needed. This article systematically reviews various high-efficiency pretreatment technologies for fresh foods. These include ultrasonic cleaning technologies, physical-field enzyme inactivation technologies, non-thermal disinfection technologies, and modified-atmosphere packagings and coatings. Mechanisms, applications, influencing factors, and advantages and disadvantages of these technologies, which can be used in a central kitchen, are outlined and discussed. Possible solutions to problems related to central-kitchen food processing are addressed, including low cleaning efficiency and automation feasibility, high nutrition loss, high energy consumption, and short shelf life of products. These should lead us to the next step of fresh food processing for a highly demanding modern society. © 2020 Society of Chemical Industry.

Evaluation of UVC Radiation and a UVC-Ozone Combination as Fresh Beef Interventions against Shiga Toxin-Producing Escherichia coli, Salmonella, and Listeria monocytogenes and Their Effects on Beef Quality

ABSTRACT

This research study was conducted to evaluate treatments with UVC light and a combination of UVC and ozone that have recently received attention from the beef processing industry as antimicrobial interventions that leave no chemical residues on products. The effectiveness of UVC and UVC plus gaseous ozone treatments was evaluated for inactivation of pathogenic bacteria on fresh beef and for any impact on fresh beef quality. Fresh beef tissues were inoculated with cocktails of Shiga toxin-producing Escherichia coli (STEC) strains (serotypes O26, O45, O103, O111, O121, O145, and O157:H7), Salmonella, and Listeria monocytogenes. Inoculated fresh beef tissues were subjected to UVC or UVC-ozone treatments at 106 to 590 mJ/cm2. UVC treatment alone or in combination with ozone reduced populations of STEC, Salmonella, L. monocytogenes, and aerobic bacteria from 0.86 to 1.49, 0.76 to 1.33, 0.5 to 1.14, and 0.64 to 1.23 log CFU, respectively. Gaseous ozone alone reduced populations of E. coli O157:H7, Salmonella, and L. monocytogenes by 0.65, 0.70, and 0.33 log CFU, respectively. Decimal reduction times (D-values) for STEC serotypes, Salmonella, and L. monocytogenes on surfaces of fresh beef indicated that the UVC-ozone treatment was more effective (P ≤ 0.05) than UVC light alone for reducing pathogens on the surface of fresh beef. Exposure to UVC or UVC plus gaseous ozone did not have a deleterious effect on fresh meat color and did not accelerate the formation of oxidative rancidity. These findings suggest that UVC and UVC in combination with gaseous ozone can be useful for enhancing the microbial safety of fresh beef without impairing fresh beef quality.

HIGHLIGHTS

Photohydroionization Reduces Shiga Toxin-Producing Escherichia coli and Salmonella on Fresh Beef with Minimal Effects on Meat Quality

The photohydroionization (PHI) technology utilizes a combination of UV light and low-level oxidizers to produce antimicrobial action, and thus, is a potential intervention to control pathogen contamination on surface of fresh beef. The objectives of the study were 1) to evaluate the effect of PHI on reduction of selected Escherichia coli (E. coli) O157:H7, non-O157 Shiga toxin-producing E. coli (STEC; O26, O45, O103, O111, O121, O145), antimicrobial resistant (AMR) and non-AMR Salmonella strains inoculated on beef flanks, and 2) to evaluate the effect of PHI treatment on the lean color and lipid oxidation of beef during refrigerated storage. Inoculated beef flanks were exposed to PHI treatment for 0 (control), 15, 30, or 60 s at 4°C. Exposure to PHI for 15 s reduced (P ≤ 0.05) pathogens on the surface of fresh beef ranging from 0.3 to 0.9 log CFU/cm2. Increasing the exposure time to 60 s did not improve (P > 0.05) reductions over 15 s for the majority of the selected pathogens, but yielded pathogen reductions ranging from 0.5 to 1.1 log CFU/cm2. Over all storage times when beef samples were exposed to PHI for 75 s, no difference (P > 0.05) was detected on lean a* value (24.67 versus 24.95), of treated and control fresh beef tissues, respectively. The highest TBARS values after storage for 14 d at 4°C was 0.33 mg MDA/kg of meat indicating that no oxidative rancidity occurred for treated beef samples. The PHI technology with 15 to 75 s exposure time was effective in controlling STEC and Salmonella contaminated on surface of fresh beef without causing adverse effects on fresh beef quality while reducing water and energy use. Further study of PHI treatment parameters under commercial plant conditions and ultimate validation of those parameters will be necessary for commercial implementation.