Microscopic Characteristics of Late Intraocular Lens Opacifications

Intraocular lens calcification in a patient with Ehlers-Danlos syndrome

Introduction

Calcification of hydrophilic intraocular lenses (IOL) is a rare complication following cataract surgery. Secondary calcification is described as due to host factors or changes in the IOL environment and uveitis, proliferative diabetic retinopathy and sequelae of ocular surgery are recognised potentiators. The impact of systemic connective tissue disease on IOL opacification is yet to described.

Purpose

To describe the clinical presentation and management of a young patient, with a rare subtype of Ehlers-Danlos syndrome, who presented with secondary IOL calcification 14 years after primary IOL insertion.

Observations

Floret-like lesions were observed on the IOL surface. Positive staining for calcification was observed with Alizarin red and von Kossa method on laboratory analysis.

Conclusions and importance

Patients with systemic connective tissue disease, such as a subtype of Ehlers-Danlos, may present with secondary IOL calcification many years after primary lens insertion. This poses an additional consideration when implanting IOLs in these patients.Good visual acuity can be achieved with IOL exchange.

In vivo comparison of implantation behavior and laboratory analysis of two preloaded intraocular lens injectors

PURPOSE

We evaluated implantation behavior and injector damage of two different IOL injector systems, the Multisert and the AutonoMe.

DESIGN

Prospective, randomized, comparative study with laboratory investigation.

METHODS

We examined used injectors from 48 bilateral cataract cases and assessed video recordings of each Implantation. All eyes were intraindividually randomized for treatment with one of the two IOL injectors. Implantation videos were reviewed for inadvertent events and the time for different implantation steps was determined. The injector nozzle tips were examined using light and scanning electron microscopy (SEM). Damage was graded using the Heidelberg Score for IOL injector damage (HeiScore). Three months postoperatively, IOLs were assessed for material changes.

RESULTS

Implantation was without critical events in 96 of 96 eyes. Mean implantation time was 41.90 ± 7.11 s with the Multisert and 52.22 ± 12.06 s with the AutonoMe. In the AutonoMe group, we observed 4 eyes (8.3%) with a failed docking attempt, 28 eyes (58.3%) with a haptic adherence, one case (2.1%) of straight leading haptic and 2 cases (4.2%) of intrawound IOL manipulation. There were no events observed in the Multisert group. The mean HeiScore values were 0.87 ± 0.61 and 3.68 ± 0.47 for the AutonoMe and Multisert. 3 months postoperatively, IOL material changes were absent.

CONCLUSIONS

Both injectors allowed safe and controlled implantation. Using Multisert, implantation behavior was more consistent. The injectors showed different damage profiles with a higher damage score for the Multisert.The study is registered at the German Clinical Trials Register (Deutsches Register Klinischer Studien; reference number: DRKS00007837).

Dystrophic Calcification in a 3-Piece Silicone Intraocular Lens

This case report describes a diagnosis of dystrophic calcification of a silicone intraocular lens implant in a patient who presented with foggy vision and glare.

[Hydrophobic surface properties of hydrophilic acrylic lenses do not protect against calcification]

BACKGROUND

Opacification through calcification of hydrophilic acrylic intraocular lenses is a serious complication of cataract surgery, which usually results in explantation of the lens. In the process of calcification, the intraocular lens material plays a crucial role: calcification only occurs in hydrophilic acrylic lenses. Hydrophobic acrylic lenses show no crystal formation within the polymer. Hydrophilic acrylic lenses from some manufacturers have hydrophobic surface properties. The question arises as to what influence these surface properties have on the risk of calcification.

OBJECTIVE

The present study investigated whether the hydrophobic surface properties of hydrophilic acrylic lenses can prevent calcification.

MATERIAL AND METHODS

Using an electrophoretic in vitro model of calcification, two hydrophilic lenses with hydrophobic surface properties were compared to two hydrophilic lenses and a hydrophobic negative control to determine the risk of calcification. The lenses were then analyzed by optical microscopy, Alizarin Red and Von Kossa staining, scanning electron microscopy (SEM) and energy dispersive X‑ray spectroscopy (EDX).

RESULTS

All four hydrophilic lens models showed calcification within the polymer. No difference was found between the hydrophilic lenses and the hydrophilic lenses with hydrophobic surface properties in terms of crystal formation. The hydrophobic negative control showed no calcification.

CONCLUSION

The investigation conducted in this study under standardized conditions could show that hydrophobic surface properties of hydrophilic acrylic lenses do not protect against calcium phosphate crystal formation within the polymer. There also is a risk of calcification in these lens models.

New exploration of ions and fatty acids in hydrophilic acrylic intraocular lens calcification

PURPOSE

To conduct a new exploration and analysis of the ion and fatty acid levels of a medium in which calcified hydrophilic intraocular lenses (IOLs) are present.

SETTING

Qingdao Eye Hospital of Shandong First Medical University, Qingdao, China.

DESIGN

Retrospective, laboratory observational case series.

METHODS

11 patients (11 eyes) who had implantation of foldable hydrophilic acrylic posterior IOLs were found to have opacification of the IOLs. In vivo and in vitro analyses included the evaluation of patients' clinical characteristics, microscopy, histological staining, energy dispersive X-ray spectroscopy (EDS), the ion level of the aqueous humor (AH) and preserving fluid (PF), and the fatty acid content of AH.

RESULTS

10 of 11 cases were female with unilateral opacification, and 7 cases had both-eye cataract surgery, including 1 first eye and 6 second eyes with IOL opacification. 4 types of similar serial numbers were counted. The analysis of AH showed that the concentrations of phosphorus and silicon were elevated but that of calcium decreased, and an increased level of silicon was detected in 3 random PFs. The palmitic (C16:0) and stearic (C18:0) fatty acids were higher than the others in the AH. The EDS confirmed that the IOL surface deposits were composed of calcium, phosphate, and a small amount of silicon.

CONCLUSIONS

More silicon and higher C16:0 and C18:0 were found in the AH of patients with IOL opacification. New ideas and avenues have been proposed in the study of IOL opacification.

Opacification of Hydrophilic Acrylic Intraocular Lenses: Overview of Laboratory Methods for Histological Analysis and Replication of IOL Calcification

Opacification of intraocular lenses (IOLs) due to material changes is a serious complication that can compromise the good visual outcomes of uncomplicated cataract surgery. In hydrophobic acrylic IOLs, opacification can result from glistening formation, while in hydrophilic acrylic IOLs, there is a risk of calcification due to the formation of calcium phosphates within the polymer. Over time, various methods have been developed to investigate calcification in hydrophilic acrylic IOLs. The aim of this article is to provide an overview of standard histological staining and models used to simulate IOL calcification. Histological staining can be used to detect calcification and assess the extent of crystal formation. The development of in vivo and in vitro replication models has helped to identify the underlying pathomechanisms of calcification. In vivo models are suitable for assessing the biocompatibility of IOL materials. Bioreactors as an in vitro model can be used to investigate the kinetics of crystal formation within the polymer. The replication of IOL calcification under standardized conditions using electrophoresis allows for the comparison of different lens materials with respect to the risk of calcification. The combination of different analytical and replication methods can be used in the future to further investigate the pathomechanisms of calcium phosphate crystal formation and the influence of risk factors. This may help to prevent calcification of hydrophilic acrylic IOLs and associated explantation and complications.

Late postoperative opacification of a new type hydrophilic acrylic intraocular lens

Background

To report the clinical consequences and laboratory characteristics of late postoperative opacification of a hydrophilic acrylic intraocular lens (US-860UV IOL) as well as the prognosis of IOL replacement.

Methods

Forty medical records (42 eyes) of patients with US-860UV IOL opacification reporting decreased or lost vision who underwent IOL explantation between 2017 and 2019 were reviewed. Explanted IOLs were analyzed by slit-lamp examination, confocal microscopy, scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) at the Shandong Key Laboratory of Ophthalmology, Shandong Eye Institute, Shandong First Medical University, and Qingdao University of Science and Technology, Qingdao, China.

Results

The mean age of the 40 patients was 74.83 ​± ​7.57 (63-92) years. The mean interval between cataract surgery and diagnosis of opacification was 32.38 ​± ​8.76 (17-48) months. Systemic diseases were found without statistical correlations, the most frequent being arterial hypertension, coronary heart disease, and diabetes mellitus. Visual acuity improved from 1.42 ​± ​1.03 to 0.31 ​± ​0.16 (logMAR) after IOL replacement. SEM, EDS and alizarin red staining showed uniformly distributed, diffuse, milk-white opacification, with calcium and phosphorus deposits on the optic and haptic surfaces that could be dissolved in 1% HCl.

Conclusions

Calcium and phosphorus deposition was the main cause of hydrophilic acrylic US-860UV IOL opacification. IOL replacement can safely and effectively improve the visual acuity of patients.

Wave-like calcification on the posterior surface of an acrylic hydrophilic bag-in-the-lens (BIL) implant

Purpose

To report secondary opacification of a hydrophilic bag-in-the-lens (BIL) which is a rare manifestation that can happen years after initial surgery.

Observations

We describe a case of a prominent wave-like, rippled opacification on the posterior surface of the BIL. The opacification was composed of calcium deposits and seems to start in the periphery as a ring and progresses to the centre of the posterior surface. Due to the specific design of the BIL, there is direct contact between the BIL and the posterior chamber, both with the space of Berger, and the anterior hyaloid, particularly in this very hyperopic eye. Conclusions and importance: Abnormal fluid flow and stagnation in an unusual retrolenticular space is a possible explanation for this unusual pattern of posterior surface opacification.

Advancements in Postoperative Care after Cataract Surgery

Cataract surgery is one of the most frequently performed surgical procedures in many countries [...].

Development of a standardized in vitro model to reproduce hydrophilic acrylic intraocular lens calcification

Opacification through calcification of hydrophilic acrylic intraocular lenses (IOL) is a severe complication after cataract surgery. Causing symptoms that range from glare through to severe vision loss, the only effective therapy is explantation of the opacified IOL so far. Although IOL calcification is a well-described phenomenon, its pathogenesis is not fully understood yet. The purpose of the current study was to develop a laboratory model to replicate IOL calcification. Calcification could be reproduced using a horizontal electrophoresis and aqueous solutions of calcium chloride and disodium hydrogen phosphate. The analysis of the in vitro calcified IOLs was performed using light microscopy, Alizarin Red and Von Kossa staining, scanning electron microscopy, energy dispersive x-ray spectroscopy and electron crystallography using transmission electron microscopy and electron diffraction. The presented laboratory model could be used to identify hydrophilic IOLs that are at risk to develop calcification and to assess the influence of associated risk factors. In addition, it can serve as a research tool to further understand this pathology.

Activation of Nrf2/HO-1 Antioxidant Pathway by Heme Attenuates Calcification of Human Lens Epithelial Cells

Cataract, an opacification in the crystalline lens, is a leading cause of blindness. Deposition of hydroxyapatite occurs in a cataractous lens that could be the consequence of osteogenic differentiation of lens epithelial cells (LECs). Nuclear factor erythroid 2-related factor 2 (Nrf2) controls the transcription of a wide range of cytoprotective genes. Nrf2 upregulation attenuates cataract formation. Here we aimed to investigate the effect of Nrf2 system upregulation in LECs calcification. We induced osteogenic differentiation of human LECs (HuLECs) with increased phosphate and calcium-containing osteogenic medium (OM). OM-induced calcium and osteocalcin deposition in HuLECs. We used heme to activate Nrf2, which strongly upregulated the expression of Nrf2 and heme oxygenase-1 (HO-1). Heme-mediated Nrf2 activation was dependent on the production of reactive oxygens species. Heme inhibited Ca deposition, and the OM-induced increase of osteogenic markers, RUNX2, alkaline phosphatase, and OCN. Anti-calcification effect of heme was lost when the transcriptional activity of Nrf2 or the enzyme activity of HO-1 was blocked with pharmacological inhibitors. Among products of HO-1 catalyzed heme degradation iron mimicked the anti-calcification effect of heme. We concluded that heme-induced upregulation of the Nrf2/HO-1 system inhibits HuLECs calcification through the liberation of heme iron.

UV-VIS Curable PEG Hydrogels for Biomedical Applications with Multifunctionality

Multifunctional biomedical materials capable of integrating optical functions are highly desirable for many applications, such as advanced intra-ocular lens (IOL) implants. Therefore, poly(ethylene glycol)-diacrylate (PEG-DA) hydrogels are used with different photoinitiators (PI). In addition to standard UV PI Irgacure, Erythrosin B and Eosin Y are used as PI with high sensitivity in the optical range of the spectrum. The minimum PI concentrations for producing new hydrogels with PEG-DA and different PIs were determined. Hydrogel films were obtained, which were applicable for light-based patterning and, hence, the functionalization of surface and volume. Cytotoxicity tests confirm cytocompatibility of hydrogels and compositions. Exploiting the correlation of structure and function allows biomedical materials with multifunctionality.

Comparative analysis of in vitro accelerated glistening formation in foldable hydrophobic intraocular lenses

PURPOSE

To analyse and compare the propensity to form glistenings in 4 different types of hydrophobic acrylic intraocular lenses (IOLs): Alcon AcrySof ® MA60AC, HOYA iSert® PC-60AD, Bausch&Lomb enVista, and Kowa Avansee™ PU6A.

METHODS

We used an accelerated laboratory method to create glistenings. IOLs were first immersed in saline at 45 °C for 24 h and then at 37 °C for 2.5 h. Microvacuole (MV) density and size were documented and calculated using an image analysis program.

RESULTS

Median density of glistenings [MV/mm2] for Alcon AcrySof ® MA60AC was 623 (range 507-804), for HOYA iSert® PC-60AD 1358 (range 684-2699), for Bausch&Lomb enVista 2 (range 1-2), and for Kowa Avansee™ PU6A 1 (range 1-4). The prevailing MV size was: 0-5 µm for Hoya IOLs, 5-10 µm for Alcon IOLs, 20-50 µm for Bausch&Lomb IOLs, and 5-50 µm for Kowa IOLs.

CONCLUSIONS

Glistenings could be induced in all studied IOLs using the accelerated laboratory method. The Alcon AcrySof ® MA60AC and HOYA iSert® PC-60AD IOLs showed MV of high density, while the glistenings in the Hoya IOLs were smaller in size compared to the Alcon IOLs. The MV density was minimal in the Bausch&Lomb enVista and Kowa Avansee™ PU6A IOLs. The propensity of the Alcon AcrySof ® MA60AC IOLs to form glistenings in vitro correlated with the findings of clinical results that are already published.

Visualization of Forward Light Scatter in Opacified Intraocular Lenses and Straylight Assessment

Background: Qualitative visualization of forward light scatter and quantitative straylight measurement of intraocular lenses (IOLs). Methods: We analyzed two calcified IOL-explants, the Euromaxx ALI313Y (Argonoptics GmbH) and the LS-312 MF30 (Oculentis BV), one IOL with artificially induced glistenings (PC-60AD, Hoya), and one control (CT Asphina 409MP, Carl Zeiss Meditec AG) free of any opacification. Analysis included light microscopy, qualitative light scatter visualization using ray propagation imaging technique, and quantitative straylight measurement using C-Quant (Oculus). Results: More light scattering effect—visible as increased light intensity outside the IOL’s main focus—was evident in all opacified IOLs than the control. The highest straylight levels were observed in the Euromaxx (289.71 deg²/sr), which showed extensive granular deposits throughout its optic, followed by the MF30 (78.58 deg²/sr), which only showed opacification in its center. The glistenings-IOL demonstrated numerous microvacuoles within the optic and had straylight levels of 22.6 deg²/sr, while the control showed the lowest straylight levels (1.7 deg²/sr). Conclusions: Ray propagation imaging technique allowed qualitative assessment of off-axis veils of light that result from increased forward light scattering. Straylight was increased in all opacified lenses compared to the clear control lens. The IOL opacifications are significant sources of glare.

A Novel Approach for Assessing Visual Impairment Caused by Intraocular Lens Opacification: High-Resolution Optical Coherence Tomography

PURPOSE

To quantify in vitro straylight induced by intraocular lens (IOL) localized opacification using an anterior segment optical coherence tomography (OCT) device.

DESIGN

Laboratory investigation.

METHODS

We obtained high-resolution OCT cross-section images of 44 explanted IOLs using a new in vitro application for an anterior segment OCT device, the Anterion (Heidelberg Engineering, Heidelberg, Germany). In 24 cases, the reason for IOL explantation was a centrally localized opacification, the sequela of a secondary ocular surgery. As a control, we used 20 IOLs removed after an IOL (sub-)luxation. Using image analysis, we found a threshold area value representing a metric for the amount of opacification in a region of interest in the IOL's central optic. We used a modified C-Quant straylight meter (Oculus, Wetzlar, Germany) to quantify light scattering. We derived a linear regression from calculating the correlation between the amount of opacification and straylight.

RESULTS

We visualized different amounts of IOL opacification using the OCT device. The opacified lenses showed a mean threshold area of 6.7% ± 3.3% and mean straylight was 95.1 ± 75.6 deg²/sr. The clear group's mean threshold area was 2.0% ± 0.8% and 5.0 ± 3.4 deg²/sr mean straylight. Straylight correlated statistically significantly with the threshold area, with a correlation coefficient of R² = 0.80, P < .001.

CONCLUSIONS

This high-resolution OCT imaging technique can be used to visualize IOL opacities. The amount of opacification correlated well with the straylight induced by the lens. Anterior segment OCT imaging might be used in the future as a tool for predicting the extent of visual impairment and aid clinicians to quantify patients' complaints.

[Opacification of Intraocular Lenses]

The spectrum of complications in the use of intraocular lenses (IOL) is different today from at the time of their introduction. Opacities in the IOL material are increasingly described in the literature as a reason for IOL explantation. This paper provides an overview of the different forms of IOL material opacities. Currently relevant forms of IOL material opacities and their effects on optical quality are summarized. The main reason for opacification in hydrophilic IOLs is calcification, whereas in hydrophobic IOLs it is mainly the formation of so-called glistenings that is reported. Most material opacities affect various optical parameters and lead to increased intraocular straylight. In case of a disturbing material opacification, the only therapeutic option is to replace the opacified IOL.

Eintrübung von Intraokularlinsen

Das Spektrum an Komplikationen und die Explantationsgründe bei der Verwendung von Intraokularlinsen (IOL) haben sich durch die Weiterentwicklung der Kataraktchirurgie verändert. Eintrübungen des Materials beeinflussen dabei unterschiedlich stark die optische Qualität. Im Fall einer störenden Eintrübung des Materials ist auch heute noch – trotz aller Fortschritte auf dem Gebiet der IOL-Materialien – ein Austausch der IOL die einzige Behandlungsoption.

In-vitro glistening formation in six different foldable hydrophobic intraocular lenses

Background

Glistenings describe small, refractile microvacuoles that may arise within the intraocular lens (IOL) material and reduce the patients’ quality of vision. Lenses composed of hydrophobic acrylic material are particularly affected by glistening formation. In this study, we compared the tendency of glistening formation in six different types of hydrophobic acrylic intraocular lenses (IOLs).

Methods

We used a well-established accelerated laboratory method to develop glistenings in the following IOLs: Vivinex XY1 (Hoya), AcrySof SN60WF (Alcon), Tecnis ZCB00 (AMO), Avansee PN6A (Kowa), Aktis SP NS-60YG (Nidek), and CT Lucia 601P (Zeiss). IOLs were first immersed in saline at 45 °C for 24 h and then at 37 °C for 2.5 h in a water bath. Microvacuole (MV) density and size (Miyata grading) were documented and calculated using an image analysis program.

Results

The mean glistening density [MV/mm²] and mean Miyata grading (in brackets) were: Vivinex: 11.6 ± 5.7 (0), SN60WF: 264.4 ± 110.3 (2.6), Tecnis: 6.0 ± 2.8 (0), Avansee: 2.2 ± 0.7 (0), Aktis: 851.4 ± 59.4 (3+) and CT Lucia: 71.0 ± 71.6 (1).

Conclusions

While all tested IOLs showed glistenings with the accelerated laboratory method, the Aktis and SN60WF showed the highest microvacuole density, followed by the CT Lucia. In comparison, the Vivinex, Tecnis, and Avansee IOLs showed far fewer number of glistenings.

A review of late intraocular lens opacifications

PURPOSE OF REVIEW

Phacoemulsification cataract surgery is one of the most commonly performed surgical procedure worldwide. In the majority of cases, intraocular lenses (IOLs) are implanted. Due to the increasing life expectancy and the fact that cataract surgery is performed in earlier stages, the anticipated IOL duration in the eye has increased over the last decades. The aim of this study was to review the types and describe the characteristics of late intraocular lens opacifications.

RECENT FINDINGS

Calcification was the most commonly reported type of opacification in hydrophilic IOLs; it usually negatively impacted the visual function and required IOL explantation. Glistening manifested in hydrophobic acrylic lenses and was frequent in some IOL models. In most cases glistening and subsurface nanoglistenigs do not lead to a decline in visual acuity or require IOL exchange. Current studies indicate that fluid-related phenomena may induce straylight, leading to a decrease of comfort and quality of vision.

SUMMARY

Several reports on late IOL opacifications have been published in recent years. In some cases, particularly in glistening, the development of the opacifications might be related to IOL aging. The influence of the fluid-related microvacuoles on the quality of vision requires further research.

[Opacification of intraocular lenses: laboratory and clinical findings]

Hintergrund

Das Spektrum der Komplikationen beim Einsatz von Intraokularlinsen (IOL) ist heute ein anderes als zur Zeit ihrer Einführung. Trübungen im IOL-Material werden vermehrt als Explantationsgrund in der Literatur beschrieben.

Ziel der Arbeit

Diese Arbeit soll einen Überblick über die verschiedenen Formen von IOL-Materialeintrübungen geben.

Material und Methoden

Die heute relevanten Formen von IOL-Materialeintrübungen und deren Auswirkungen auf die optische Abbildungsqualität wurden zusammengestellt.

Ergebnisse und Diskussion

Als Grund für eine Eintrübung steht bei hydrophilen IOL die Kalzifikation im Vordergrund, während bei hydrophoben IOL v. a. über die Entstehung sog. „Glistenings“ berichtet wird. Die meisten Materialeintrübungen beeinflussen verschiedene optische Parameter und führen zu einem erhöhten intraokularen Streulicht. Im Falle einer störenden Materialeintrübung besteht die einzige Therapieoption in einem Austausch der eingetrübten IOL.