A novel 3D histotypic cartilage construct engineered by supercritical carbon dioxide decellularized porcine nasal cartilage graft and chondrocytes exhibited chondrogenic capability in vitro

Cartilage Tissue Engineering in Multilayer Tissue Regeneration

The functional and structural integrity of the tissue/organ can be compromised in multilayer reconstructive applications involving cartilage tissue. Therefore, multilayer structures are needed for cartilage applications. In this review, we have examined multilayer scaffolds for use in the treatment of damage to organs such as the trachea, joint, nose, and ear, including the multilayer cartilage structure, but we have generally seen that they have potential applications in trachea and joint regeneration. In conclusion, when the existing studies are examined, the results are promising for the trachea and joint connections, but are still limited for the nasal and ear. It may have promising implications in the future in terms of reducing the invasiveness of existing grafting techniques used in the reconstruction of tissues with multilayered layers.

Porcine nasal septum cartilage-derived decellularized matrix promotes chondrogenic differentiation of human umbilical mesenchymal stem cells without exogenous growth factors

BACKGROUND

In the domain of plastic surgery, nasal cartilage regeneration is of significant importance. The extracellular matrix (ECM) from porcine nasal septum cartilage has shown potential for promoting human cartilage regeneration. Nonetheless, the specific biological inductive factors and their pathways in cartilage tissue engineering remain undefined.

METHODS

The decellularized matrix derived from porcine nasal septum cartilage (PN-DCM) was prepared using a grinding method. Human umbilical cord mesenchymal stem cells (HuMSCs) were cultured on these PN-DCM scaffolds for 4 weeks without exogenous growth factors to evaluate their chondroinductive potential. Subsequently, proteomic analysis was employed to identify potential biological inductive factors within the PN-DCM scaffolds.

RESULTS

Compared to the TGF-β3-cultured pellet model serving as a positive control, the PN-DCM scaffolds promoted significant deposition of a Safranin-O positive matrix and Type II collagen by HuMSCs. Gene expression profiling revealed upregulation of ACAN, COL2A1, and SOX9. Proteomic analysis identified potential chondroinductive factors in the PN-DCM scaffolds, including CYTL1, CTGF, MGP, ITGB1, BMP7, and GDF5, which influence HuMSC differentiation.

CONCLUSION

Our findings have demonstrated that the PN-DCM scaffolds promoted HuMSC differentiation towards a nasal chondrocyte phenotype without the supplementation of exogenous growth factors. This outcome is associated with the chondroinductive factors present within the PN-DCM scaffolds.

An overview of nasal cartilage bioprinting: from bench to bedside

Nasal cartilage diseases and injuries are known as significant challenges in reconstructive medicine, affecting a substantial number of individuals worldwide. In recent years, the advent of three-dimensional (3D) bioprinting has emerged as a promising approach for nasal cartilage reconstruction, offering potential breakthroughs in the field of regenerative medicine. This paper provides an overview of the methods and challenges associated with 3D bioprinting technologies in the procedure of reconstructing nasal cartilage tissue. The process of 3D bioprinting entails generating a digital 3D model using biomedical imaging techniques and computer-aided design to integrate both internal and external scaffold features. Then, bioinks which consist of biomaterials, cell types, and bioactive chemicals, are applied to facilitate the precise layer-by-layer bioprinting of tissue-engineered scaffolds. After undergoing in vitro and in vivo experiments, this process results in the development of the physiologically functional integrity of the tissue. The advantages of 3D bioprinting encompass the ability to customize scaffold design, enabling the precise incorporation of pore shape, size, and porosity, as well as the utilization of patient-specific cells to enhance compatibility. However, various challenges should be considered, including the optimization of biomaterials, ensuring adequate cell viability and differentiation, achieving seamless integration with the host tissue, and navigating regulatory attention. Although numerous studies have demonstrated the potential of 3D bioprinting in the rebuilding of such soft tissues, this paper covers various aspects of the bioprinted tissues to provide insights for the future development of repair techniques appropriate for clinical use.

Recent Advances in Decellularized Extracellular Matrix-Based Bioinks for 3D Bioprinting in Tissue Engineering

In recent years, three-dimensional (3D) bioprinting has been widely utilized as a novel manufacturing technique by more and more researchers to construct various tissue substitutes with complex architectures and geometries. Different biomaterials, including natural and synthetic materials, have been manufactured into bioinks for tissue regeneration using 3D bioprinting. Among the natural biomaterials derived from various natural tissues or organs, the decellularized extracellular matrix (dECM) has a complex internal structure and a variety of bioactive factors that provide mechanistic, biophysical, and biochemical signals for tissue regeneration and remodeling. In recent years, more and more researchers have been developing the dECM as a novel bioink for the construction of tissue substitutes. Compared with other bioinks, the various ECM components in dECM-based bioink can regulate cellular functions, modulate the tissue regeneration process, and adjust tissue remodeling. Therefore, we conducted this review to discuss the current status of and perspectives on dECM-based bioinks for bioprinting in tissue engineering. In addition, the various bioprinting techniques and decellularization methods were also discussed in this study.

Recent Advances in Decellularized Matrix-Derived Materials for Bioink and 3D Bioprinting

As an emerging 3D printing technology, 3D bioprinting has shown great potential in tissue engineering and regenerative medicine. Decellularized extracellular matrices (dECM) have recently made significant research strides and have been used to create unique tissue-specific bioink that can mimic biomimetic microenvironments. Combining dECMs with 3D bioprinting may provide a new strategy to prepare biomimetic hydrogels for bioinks and hold the potential to construct tissue analogs in vitro, similar to native tissues. Currently, the dECM has been proven to be one of the fastest growing bioactive printing materials and plays an essential role in cell-based 3D bioprinting. This review introduces the methods of preparing and identifying dECMs and the characteristic requirements of bioink for use in 3D bioprinting. The most recent advances in dECM-derived bioactive printing materials are then thoroughly reviewed by examining their application in the bioprinting of different tissues, such as bone, cartilage, muscle, the heart, the nervous system, and other tissues. Finally, the potential of bioactive printing materials generated from dECM is discussed.

Emerging 3D bioprinting applications in plastic surgery

Plastic surgery is a discipline that uses surgical methods or tissue transplantation to repair, reconstruct and beautify the defects and deformities of human tissues and organs. Three-dimensional (3D) bioprinting has gained widespread attention because it enables fine customization of the implants in the patient's surgical area preoperatively while avoiding some of the adverse reactions and complications of traditional surgical approaches. In this paper, we review the recent research advances in the application of 3D bioprinting in plastic surgery. We first introduce the printing process and basic principles of 3D bioprinting technology, revealing the advantages and disadvantages of different bioprinting technologies. Then, we describe the currently available bioprinting materials, and dissect the rationale for special dynamic 3D bioprinting (4D bioprinting) that is achieved by varying the combination strategy of bioprinting materials. Later, we focus on the viable clinical applications and effects of 3D bioprinting in plastic surgery. Finally, we summarize and discuss the challenges and prospects for the application of 3D bioprinting in plastic surgery. We believe that this review can contribute to further development of 3D bioprinting in plastic surgery and provide lessons for related research.

Foraging for the Optimal Dressing Scaffold to Carry Adipose-Derived Stromal/Progenitor Cells for Cell Therapy

In our daily plastic surgery practice, we have seen many chronic wounds that need new biotechnology to help and improve wound healing. Stem cells play a crucial role in regenerative medicine. Many pre-clinical researches had reported the beneficial paracrine effects of stem cell therapy for chronic wounds. Cell-friendly scaffolds may provide the protection and three-dimensional space required for adherence of stem cells, thus allowing these stem cells to proliferate and differentiate for treatment purpose. A successful scaffold may enhance the effects of stem cell therapy. In this presented series, the authors attempted to identify the most suitable scaffolds from several commercially available wound dressings that could sustain adipose-derived stromal/progenitor cells (ADSCs) survival. Therefore, we isolated ADSCs containing the green fluorescent protein (GFP) from GFP transgenic rats. The GFP (+) ADSCs and their progenies could be easily observed using a fluorescence microscope. Moreover, we analyzed the cytokines secreted in condition medium (CM) to understand the activities of ADSCs in various dressings. Our results showed that the foam dressings, hydrofiber, chitosan, and alginate plus carboxymethylcellulose were identified as the most suitable dressing materials. Higher concentrations of transforming growth factor beta (TGF-β) and vascular endothelial growth factor (VEGF) were observed 48 h after loading them with GFP (+) ADSCs. Therefore, multiple topical cell therapy using ADSCs can be performed by applying suitable dressing scaffolds without repeated needle injections to deliver the stem cells into the wound bed. Based on their fluorescence property, the GFP (+) ADSCs can also possibly be used for testing biocompatibility of medical materials in the future.

Supercritical carbon dioxide decellularized porcine cartilage graft with PRP attenuated OA progression and regenerated articular cartilage in ACLT-induced OA rats

Knee osteoarthritis (OA) is a common degenerative articular disorder and considered one of the primary causes of pain and functional disability. Knee OA is prevalent in 10% of men and 13% of women aged 60 years above. The study aims to use cartilage tissue engineering that combines the triads of decellularized porcine cartilage graft as "scaffold," plasma rich platelet (PRP) as "signal" and chondrocytes from rat as "cell" to attenuate ACLT-induced OA progression and regenerate the knee cartilage in rats. Decellularization of the porcine cartilage was characterized by hematoxylin and eosin, 4,6-Diamidino-2-phenylindole staining, scanning electron microscopy and residual DNA quantification. The protective effect of decellularized porcine cartilage graft (dPCG) was evaluated by intra-articular administration in surgically induced anterior cruciate ligament transection (ACLT) rat osteoarthritis (OA) model. Supercritical carbon dioxide technology completely decellularized the porcine cartilage. Intra-articular administration of dPCG with or without PRP significantly reduced the ACLT-induced OA symptoms and attenuated the OA progression. Pain-relief by dPCG with or without PRP was assessed by capacitance meter and improved articular cartilage damage in the rat knee was characterized by X-ray and micro-CT. Besides, the histological analysis depicted cartilage protection by dPCG with or without PRP. The repairation and attenuation effect by dPCG with or without PRP in the articular knee cartilage damage were also explored by safranin-O, type II collagen, aggrecan and SOX-9 immuno-staining. To conclude, intra-articular administration of dPCG with or without PRP is efficient in repairing the damaged cartilage in the experimental OA model.

Reconstruction of the orbital floor using supercritical CO2 decellularized porcine bone graft

Orbital floor fractures subsequently lead to consequences such as diplopia and enophthalmos. The graft materials used in orbital floor fractures varied from autografts to alloplastic grafts, which possess certain limitations. In the present study, a novel porcine bone matrix decellularized by supercritical CO2 (scCO2), ABCcolla® Collagen Bone Graft, was used for the reconstruction of the orbital framework. The study was approved by the institutional review board (IRB) of Kaohsiung Medical University Chung-Ho Memorial Hospital (KMUH). Ten cases underwent orbital floor reconstruction in KMUH in 2019. The orbital defects were fixed by the implantation of the ABCcolla® Collagen Bone Graft. Nine out of ten cases used 1 piece of customized ABCcolla® Collagen Bone Graft in each defect. The other case used 2 pieces of customized ABCcolla® Collagen Bone Graft in one defect area due to the curved outline of the defect. In the outpatient clinic, all 10 cases showed improvement of enophthalmos on CT (computerized tomography) at week 8 follow-up. No replacement of implants was needed during follow-ups. To conclude, ABCcolla® Collagen Bone Graft proved to be safe and effective in the reconstruction of the orbital floor with high accessibility, high stability, good biocompatibility, low infection rate and low complication rate.