Ultrasensitive and Green Bubbling Extraction Strategies: An Extensible Solvent-Free Re-Enrichment Approach for Ultratrace Pollutants in Aqueous Samples

Ultratrace organic pollutants in the environment pose severe threats to human health; hence, their accurate detection is essential. In this study, we develop a secondary solvent-free enrichment strategy based on bubbling extraction (BE). Especially, we used BE solid-phase microextraction and BE carbon nanotube paper absorption to capture aerosols from a liquid water surface, desorb analytes, and analyze the analytes using mass spectrometry. The application of a solvent-free enrichment strategy helps overcome technical challenges in implementing BE technology, including reproducibility, quantification, and sensitivity. This approach objectively demonstrates the enrichment efficiency of BE, resulting in improved mass spectrometry response and quantification. It effectively tackles the difficulties in detecting and quantifying ultratrace environmental pollutants in mass spectrometric analysis. The present study successfully conducted a quantitative analysis of 16 polycyclic aromatic hydrocarbons and 7 antibiotics in 48 environmental water samples. This strategy proved effective in detecting the presence and distribution of polar and nonpolar environmental pollutants in rivers and lakes. Moreover, this strategy has several advantages, such as ultrahigh sensitivity at the femtograms per liter level, good greenness, multiplexed quantitation, low sample consumption, and ease of operation. Overall, the utilization of the ultrasensitive and environmentally friendly BE approach presents a reliable and adaptable method for the identification of ultratrace environmental pollutants in water specimens, thereby enabling early monitoring of pollutant levels.

Catalytic Oxygenation-Mediated Extraction as a Facile and Green Way to Analyze Volatile Solutes

Sparging-based methods have long been used to liberate volatile organic compounds (VOCs) from liquid sample matrices prior to analysis. In these methods, a carrier gas is delivered from an external source. Here, we demonstrate "catalytic oxygenation-mediated extraction" (COME), which relies on biocatalytic production of oxygen occurring directly in the sample matrix. The newly formed oxygen (micro)bubbles extract the dissolved VOCs. The gaseous extract is immediately transferred to a separation or detection system for analysis. To start COME, dilute hydrogen peroxide is injected into the sample supplemented with catalase enzyme. The entire procedure is performed automatically-after pressing a "start" button, making a clapping sound, or triggering from a smartphone. The pump, valves, and detection system are controlled by a microcontroller board. For quality control and safety purposes, the reaction chamber is monitored by a camera linked to a single-board computer, which follows the enzymatic reaction progress by analyzing images of foam in real time. The data are instantly uploaded to the internet cloud for retrieval. The COME apparatus has been coupled on-line with the gas chromatography electron ionization mass spectrometry (MS) system, atmospheric pressure chemical ionization (APCI) MS system, and APCI ion-mobility spectrometry system. The three hyphenated variants have been tested in analyses of complex matrices (e.g., fruit-based drinks, whiskey, urine, and stored wastewater). In addition to the use of catalase, COME variants using crude potato pulp or manganese(IV) dioxide have been demonstrated. The technique is inexpensive, fast, reliable, and green: it uses low-toxicity chemicals and emits oxygen.

Low-cost and open-source strategies for chemical separations

In recent years, a trend toward utilizing open access resources for laboratory research has begun. Open-source design strategies for scientific hardware rely upon the use of widely available parts, especially those that can be directly printed using additive manufacturing techniques and electronic components that can be connected to low-cost microcontrollers. Open-source software eliminates the need for expensive commercial licenses and provides the opportunity to design programs for specific needs. In this review, the impact of the "open-source movement" within the field of chemical separations is described, primarily through a comprehensive look at research in this area over the past five years. Topics that are covered include general laboratory equipment, sample preparation techniques, separations-based analysis, detection strategies, electronic system control, and software for data processing. Remaining hurdles and possible opportunities for further adoption of open-source approaches in the context of these separations-related topics are also discussed.

Effervescence-Assisted Microextraction-One Decade of Developments

Dispersive microextraction techniques are key in the analytical sample treatment context as they combine a favored thermodynamics and kinetics isolation of the target analytes from the sample matrix. The dispersion of the extractant in the form of tiny particles or drops, depending on the technique, into the sample enlarges the contact surface area between phases, thus enhancing the mass transference. This dispersion can be achieved by applying external energy sources, the use of chemicals, or the combination of both strategies. Effervescence-assisted microextraction emerged in 2011 as a new alternative in this context. The technique uses in situ-generated carbon dioxide as the disperser, and it has been successfully applied in the solid-phase and liquid-phase microextraction fields. This minireview explains the main fundamentals of the technique, its potential and the main developments reported.

Elevating Chemistry Research with a Modern Electronics Toolkit

With the rapid development of high technology, chemical science is not as it used to be a century ago. Many chemists acquire and utilize skills that are well beyond the traditional definition of chemistry. The digital age has transformed chemistry laboratories. One aspect of this transformation is the progressing implementation of electronics and computer science in chemistry research. In the past decade, numerous chemistry-oriented studies have benefited from the implementation of electronic modules, including microcontroller boards (MCBs), single-board computers (SBCs), professional grade control and data acquisition systems, as well as field-programmable gate arrays (FPGAs). In particular, MCBs and SBCs provide good value for money. The application areas for electronic modules in chemistry research include construction of simple detection systems based on spectrophotometry and spectrofluorometry principles, customizing laboratory devices for automation of common laboratory practices, control of reaction systems (batch- and flow-based), extraction systems, chromatographic and electrophoretic systems, microfluidic systems (classical and nonclassical), custom-built polymerase chain reaction devices, gas-phase analyte detection systems, chemical robots and drones, construction of FPGA-based imaging systems, and the Internet-of-Chemical-Things. The technology is easy to handle, and many chemists have managed to train themselves in its implementation. The only major obstacle in its implementation is probably one's imagination.