ATR-FTIR, EDS and SEM evaluations of enamel structure after treatment with hydrogen peroxide bleaching agents loaded with nano-hydroxyapatite particles

Effect of an experimental desensitizer with a hydroxyapatite-capsaicin composite applied before in-office dental bleaching on hydrogen peroxide diffusion, color and surface changes

OBJECTIVE

To evaluate a prior application of an experimental desensitizer containing a hydroxyapatite-capsaicin composite (HAp-CAP) in different concentrations on hydrogen peroxide (HP) diffusion into the pulp chamber, bleaching efficacy (BE) and on physical and chemical alterations of the enamel surface after in-office bleaching.

MATERIALS AND METHODS

Forty sound premolars were randomized in five groups according to each experimental condition (n = 8): no bleaching (negative control), only bleaching (positive control), 0.1%, 1% and 5% of HAp-CAP. Four groups were submitted to in-office bleaching (HP 35%) post-desensitizer application. The HP concentration (µg/mL) on the pulp chamber was measured by UV-Vis spectrophotometer. The BE was measured by digital spectrophotometer (ΔEab, ΔE00 and ΔWID) before and after 7 days bleaching. Enamel tooth fragments obtained from twenty molars were submitted to the same experimental conditions and analyzed using FE-SEM and EDS, Vickers microhardness (VHN), Raman spectroscopy, and nanoroughness (Ra) by AFM to evaluate morphologic and chemical changes on enamel surface. All data were submitted to statistical analysis (α = 0.05).

RESULTS

The groups treated with HAp-CAP exhibited a lower concentration of HP in the pulp chamber compared to only bleaching group (p < 0.05). There were no significant differences observed in BE between HAp-CAP groups and only bleaching group (p > 0.05). Only HAp-CAP 5% showed no significant differences in VHN values when compared to no bleaching group (p > 0.05). There were no significant differences among any group in Ra values (p > 0.05). The groups submitted to HAp-CAP showed a higher mineral concentration when compared to only bleaching group (p < 0.05).

CONCLUSION

Desensitizers containing HAp-CAP up to 5% effectively reduce HP diffusion into the pulp chamber after in-office bleaching, without interfering to BE and Ra, as well as prevent enamel demineralization.

CLINICAL RELEVANCE

The use of desensitizers containing HAp-CAP during in-office bleaching treatments offers a promising approach to reduce the risk of pulp irritation caused by hydrogen peroxide diffusion, without compromising the bleaching effectiveness or causing surface roughness.

Biological action of bleaching agents on tooth structure: A review

The use of bleaching agents to remove stains is one of the main dental procedures to improve the aesthetics of teeth. This review presents the main agents used for tooth whitening, existing clinical protocols, and the structural changes that may occur through their use. The main bleaching agents consist of hydrogen peroxide and carbamide peroxide, which are used in bleaching techniques for vital teeth. These techniques can be performed in the office by a professional or by the individual in a home en-vironment under professional guidance. Bleaching agents come in a variety of concentrations and there are over-the-counter products available on the market with lower concentrations of hydrogen peroxide. Due to the chemical characteristics of the agents, changes in the organic and inorganic content of the tooth structure can be observed. These changes are related to morphological changes characterized by in-creased permeability and surface roughness, such changes compromise the mechanical resistance of the tooth. Furthermore, bleaching agents can promote molecular changes after reaching the dental pulp, resulting in oxidative stress of pulp cells and the release of pro-inflammatory mediators. Despite the bleaching effectiveness, tooth sensitivity is considered the main side effect of use. Therefore, among the heterogeneity of protocols, those that used the bleaching agent for a prolonged time and in lower con-centrations presented more harmful effects on the tooth structure.

Advancing teeth whitening efficacy via dual-phototherapeutic strategy incorporating molybdenum disulfide embedded in carrageenan hydrogel for dental healthcare

Teeth discoloration poses a widespread challenge in dental health across various regions. Conventional teeth whitening methods often result in enamel deterioration and soft tissue harm due to the utilization of incompatible whitening agents and continuous intense light exposure. Here, we propose an effective phototherapy technique for teeth whitening, employing pathways of energy transition through intersystem crossing. The integration of MoS2 nanosheets into carrageenan gel (MoS2 NSs@Carr) facilitates both photothermal-hyperthermia and the generation of reactive oxygen species (ROS) through photocatalytic processes. The efficacy of ROS generation by the phototherapeutic MoS2 NSs@Carr on teeth whitening in the scenario. This approach ensures comprehensive teeth whitening by eliminating deep-seated stains on the teeth while preserving structural integrity and avoiding any tissue toxicity. This research highlights the efficacy of the phototherapeutic MoS2 NSs@Carr for dental whitening and underscores the potential of exploring nanostructures based on MoS2 NSs for managing dental healthcare issue.

Tooth whitening: current status and prospects

As a safe, effective, economical, and convenient technique, tooth whitening is one of the most popular treatments for improving tooth discoloration. This review summarizes the theoretical and recent research developments in the classification and mechanisms of tooth discoloration, as well as the principles, agents, effects, and side effects of tooth whitening techniques. The aim is to provide a basis for the clinical treatment of tooth whitening techniques and to suggest possible new ideas for further research. The accepted mechanism of whitening is the redox reaction of oxides in the whitening reagent, and the whitening effect is remarkable. However, side effects such as tooth sensitivity and irritation of gum and other oral soft tissues can still occur. It is recommended that more monitoring be carried out in the clinic to monitor these side effects, and care should be taken to protect the soft tissues in the mouth during office whitening procedures. Furthermore, there is a need to develop new additives or natural whitening products to reduce the occurrence of side effects.

Remineralization potential of varying concentrations of two plant-based extracts of Cocos nucifera on white spot lesions using SEM and EDAX analysis: An in vitro study

Aim

To evaluate the remineralization potential of varying concentrations of two plant-based extracts of Cocos nucifera on white spot lesions using SEM and EDAX in vitro testing methods.

Materials and Methods

The pulp was freshly obtained from coconut and divided into two. Then, coconut milk was obtained by blending, while the next portion was freeze-dried and lyophilized. Third molar teeth were processed into tooth slabs (N = 40) and split equally into five groups by block randomization. After demineralization, one tooth slab was taken from each, and SEM analysis was done. Remineralization was then performed among the various groups that included Group 1, which acted as a control and consisted of the remineralization solution. Groups 2 and 3 comprised 1:1 and 2:1 concentrations of the coconut milk, whereas Groups 4 and 5 consisted of 1:1 and 2:1 concentrations of the lyophilized extract. SEM and EDAX testing were done post-remineralization. Ca and phosphate values were tabulated, and statistical significance was determined for the obtained values using ANOVA.

Results

Among the control and treatment groups, surface remineralization was better observed in 1:1 coconut milk and 2:1 coconut milk than in the 2:1 lyophilized coconut, control, and 1:1 lyophilized coconut. Between the control and treatment groups, Ca and phosphate percentages (P < 0.001) showed statistical differences. The lowest value of 2.3% was noted in the 2:1 lyophilized coconut group.

Conclusion

Coconut extracts exhibit remineralization potential on the artificial carious lesion. Coconut milk exhibited significant improvement in the surface properties than lyophilized coconut.

Physicochemical understanding of biomineralization by molecular vibrational spectroscopy: From mechanism to nature

The process and mechanism of biomineralization and relevant physicochemical properties of mineral crystals are remarkably sophisticated multidisciplinary fields that include biology, chemistry, physics, and materials science. The components of the organic matter, structural construction of minerals, and related mechanical interaction, etc., could help to reveal the unique nature of the special mineralization process. Herein, the paper provides an overview of the biomineralization process from the perspective of molecular vibrational spectroscopy, including the physicochemical properties of biomineralized tissues, from physiological to applied mineralization. These physicochemical characteristics closely to the hierarchical mineralization process include biological crystal defects, chemical bonding, atomic doping, structural changes, and content changes in organic matter, along with the interface between biocrystals and organic matter as well as the specific mechanical effects for hardness and toughness. Based on those observations, the special physiological properties of mineralization for enamel and bone, as well as the possible mechanism of pathological mineralization and calcification such as atherosclerosis, tumor micro mineralization, and urolithiasis are also reviewed and discussed. Indeed, the clearly defined physicochemical properties of mineral crystals could pave the way for studies on the mechanisms and applications.

Osteogenic and microstructural characterization in normal versus deformed jaws of rainbow trout (Oncorhynchus mykiss) from freshwater

Introduction

During the processes of formation and maturation of farmed salmonids, bone deformities could be associated with changes in the mineralization levels of the axial skeleton and the bone-signaling pathways. Therefore, we aimed to evaluate the gene expression during bone formation and regeneration and their relationship with mineralization in rainbow trout with mandibular deformation.

Methods

We included five normal fish and five specimens with mandibular deformation in smolt rainbow trout weighing 400 g and measuring 25 to 35 cm in length. We assessed 1. serum metabolites, 2. microstructure and mandibular bone mineralization and, 3. gene expression of bone signaling pathways. These analyses were done to determine the main causes and/or mechanisms of deformity.

Results and discussion

Our results show a marked elevation of bone morphogenetic protein 2 (Bmp2). Also, we found a distinct expression pattern for transcriptional factors, observing diminished RUNX family transcription factor 2 (Runx-2) expression coupled with a simultaneous elevation of osterix (Osx) levels. We also observed decreased osteocalcin and alkaline phosphatase levels related to mineral content loss and an increase in collagen type I as a compensatory structural response. In conclusion, rainbow trout deformation was characterized by demineralization, increased porosity without destruction of the organic matrix, and a moderate decrease in bone mineral content.

"Afterglow" Photodynamic Therapy Based on Carbon Dots Embedded Silica Nanoparticles for Nondestructive Teeth Whitening

Teeth staining is a common dental health challenge in many parts of the world. Traditional teeth whitening techniques often lead to enamel damage and soft tissue toxicity due to the use of bioincompatible whitening reagents and continuous strong light irradiation. Herein, an "afterglow" photodynamic therapy (aPDT) for teeth whitening is proposed, which is realized by energy transition pathways of intersystem crossing. The covalent and hydrogen bonds formed by carbon dots embedded in silica nanoparticles (CDs@SiO2) facilitate the passage of energy through intersystem crossing (ISC), thereby extending the half-life of reactive oxygen species (ROS). The degradation efficiency of aPDT on dyes was higher than 95% in all cases. It can thoroughly whiten teeth by eliminating stains deep in the enamel without damaging the enamel structure and causing any tissue toxicity. This study illustrates the superiority of aPDT for dental whitening and the approach to exploring carbon-dots-based nanostructures in the treatment of oral diseases.

α-Mangostin and lawsone methyl ether in tooth gel synergistically increase its antimicrobial and antibiofilm formation effects in vitro

OBJECTIVES

α-Mangostin (α-MG) and lawsone methyl ether (LME) show antimicrobial and anti-biofilm activities. The objectives of this study were to develop a herbal tooth gel containing α-MG and LME plus fluoride and determine its antimicrobial, anti-biofilm formation, anti-cancer, anti-inflammatory, wound healing, and enamel microhardness effects.

METHODS

Antimicrobial assays against Streptococcus mutans, Porphyromonas gingivalis, and Candida albicans were performed. The microbes' ultrastructural morphology was assessed using Transmission Electron Microscopy. The effect on microbial biofilm formation was tested by a broth microdilution. Cell viability was assessed with MTT assay. The anti-inflammatory effect was investigated by measuring inhibition of nitric oxide production. Enamel microhardness was measured via Vickers microhardness testing. The enamel chemical composition was investigated with Fourier Transform Spectrometer. The enamel surface morphology and fluoride content were examined by Scanning Electron Microscopy and Energy Dispersive X-ray Spectroscopy.

RESULTS

The results show synergistic effects of α-MG and LME on antimicrobial activity and antibiofilm formation without cytotoxicity at a therapeutic dose. At a higher dose, the tooth gel inhibited proliferation of cancer cell line. Enamel microhardness was increased after brushing with the tooth gel plus fluoride. A large amount of fluoride was detected on the enamel surface.

CONCLUSION

The tooth gel containing α-MG and LME synergized its antimicrobial activity and antibiofilm formation and inhibited oral cancer cell proliferation. Incorporating fluoride into the tooth gel increased enamel microhardness. Thus, the herbal tooth gel containing α-MG and LME plus fluoride may be useful for preventing dental caries and promoting oral health.

Effect of pH of In-Office Bleaching Gels and Timing of Fluoride Gel Application on Microhardness and Surface Morphology of Enamel

Objective

To assess microhardness (VH) of enamel treated with two in-office bleaching agents with different pH and to study the effect of post- and prebleaching fluoride therapy.

Materials and Methods

Eighty bovine incisors were divided into eight groups: G1-Unbleached group; G2-2% NaF; G3-Pola Office (pH = 3.8); G4-Pola Office+ (pH = 7); G5-Pola Office followed by 2% NaF; G6-2% NaF followed by Pola Office; G7-Pola Office+ followed by 2% NaF; G8-2% NaF followed by Pola Office+. Bleaching was conducted 3x with 1-week intervals (T1/T7/T14). Specimens were kept in artificial saliva. VH was measured at T1, T7, and T14. Data were analyzed using repeated measure ANOVA. Surface morphology was assessed using scanning electron microscopy.

Result

There was no significant difference among the groups at T1. No significant difference was found between G3 and G4 at all intervals. 2% NaF (G5/G6 vs. G3) significantly prevented softening at T7 and T14. Some nonsignificant hardening was observed for 2% NaF for G7/G8 vs. G4. At T14, G3 showed the lowest VH values. G5 showed higher VH values compared to other groups apart from G6-G7. No relationship between bleaching protocols and surface morphology was observed.

Conclusion

Pola Office caused the most softening. 2% NaF gel application after Pola Office bleaching was effective in recovering enamel hardness. Fluoride application after Pola Office+ bleaching provided little benefit.

Nanohydroxyapatite in dentistry: A comprehensive review

Enamel, being the hardest and the highest mineralized tissue of the human body, contains nearly 96% inorganic components and 4% organic compounds and water. Dentin contains 65% inorganic components and 35% organic and water content. The translucency and white appearance of enamel are attributed to Hydroxyapatite (HA), which constitutes the major part of the inorganic component of dental hard tissue. With the advent of nanotechnology, the application of Nanohydroxyapatite (nHA) has piqued interest in dentistry due to its excellent mechanical, physical, and chemical properties. Compared to HA, nHA is found to have superior properties such as increased solubility, high surface energy and better biocompatibility. This is due to the morphological and structural similarity of nanosized hydroxyapatite particles to tooth hydroxyapatite crystals. These nanoparticles have been incorporated into various dental formulations for different applications to ensure comprehensive oral healthcare. To prevent dental caries, several nHA based dentifrices, mouth rinsing solutions and remineralizing pastes have been developed. nHA-based materials, such as nanocomposites, nano impression materials, and nanoceramics, have proven to be very effective in restoring tooth deformities (decay, fracture, and tooth loss). The nHA coating on the surface of the dental implant helps it bind to the bone by forming a biomimetic coating. A recent innovative strategy involves using nHA to reduce dentinal hypersensitivity and to reconstruct periodontal bone defects. The purpose of the present review is to discuss the different applications of nHA in dentistry, especially in preventive and restorative dentistry, dental implantology, bleaching and dentine hypersensitivity management.

Fracture strength and energy-dispersive spectroscopy analysis of 3-unit fixed partial dentures fabricated from different monolithic zirconia materials

STATEMENT OF PROBLEM

Mastication forces in different regions affect the survival of multiunit posterior restorations. The fracture strength of 3-unit posterior monolithic zirconia fixed partial dentures (FPDs) and their fracture patterns require investigation.

PURPOSE

The purpose of this in vitro study was to evaluate and compare the fracture strength and fracture pattern of 3-unit posterior FPDs fabricated from different monolithic zirconia materials.

MATERIAL AND METHODS

Thirty 3-unit FPDs were fabricated from BruxZir, FireZr, and Upcera (n=10 per group). Energy-dispersive spectroscopy analysis was performed on 2 selected specimens from each group. All specimens were exposed to a mastication simulator for 1.2×10⁶ cycles and then monotonically loaded to fracture at a crosshead speed of 1 mm/min. The surfaces of a selected fractured specimen were examined at magnifications of ×25 and ×500 with scanning electron microscopy. Conformity to normal distribution was evaluated with the Shapiro-Wilk test. One-way analysis of variance was used to compare the normally distributed initial crack formation load F initial (F_i) and catastrophic failure strength F maximum (F_m) means by group. Weibull statistics were calculated by using the maximum likelihood estimation method. The chi-square test was used to compare shape and scale parameters (α=.05).

RESULTS

The mean F_m values were fail1878.9 N for Upcera, 2177.8 N for BruxZir, and 2229.4 N for FireZr. Upcera and BruxZir showed statistically significant differences for the F_m mean values (P=.039). The differences between the fracture type distributions according to the groups were statistically similar (P>.05). For F_i, Upcera presented the highest Weibull modulus value (2.199), FireZr had the lowest (1.594), while for F_m, BruxZir had the highest Weibull modulus value (9.267) and FireZr the lowest (6.572).

CONCLUSIONS

Using the zirconia materials BruxZir, FireZr, and Upcera resulted in high F_m values after aging procedures. With all materials, the fractures were most commonly found in the connector areas in the tested FPDs.

The Effect of In-Office Bleaching with Different Concentrations of Hydrogen Peroxide on Enamel Color, Roughness, and Color Stability

The aim of this study is to evaluate the effectiveness of in-office bleaching in esthetic dentistry on the roughness and color stability of the enamel surface, using different concentrations of hydrogen peroxide (HP). Fifty human incisors were randomly divided into 5 groups (n = 10). No bleaching was performed in the control group. For these groups, concentrations of 40% HP with fluoride (F), 35% HP with calcium (Ca), 25% HP with nano-hydroxyapatite (nHA) and 18% HP with nHA were used for bleaching in the test groups. Surface roughness was assessed at baseline after bleaching occurred. Color measurements were first obtained at baseline, then after the first and second sessions of bleaching, and, finally, after the staining protocol. Scanning electron microscopy and atomic force microscopy were performed. Statistical analysis was conducted with a one-way ANOVA, followed by a post hoc Tukey's test and a paired-samples t-test (p < 0.05). All the bleaching gels used exhibited a similar color change (p > 0.05). Bleaching gels containing 18% HP with nHA and that containing 35% HP with Ca caused less surface roughness of the enamel. Of these concentrations, 25% HP with nHA caused the most surface roughness and no significant difference was observed, compared with 40% HP with F. The highest coloration after bleaching was observed in 40% HP with F and 25% HP with nHA. The lowest coloration was obtained in 35% HP with Ca and 18% HP with nHA but no significant difference was observed between them and the control group. A concentration above 18% HP does not increase the bleaching effectiveness. The results show that 18% HP with nHA and 35% HP with Ca resulted in the least increase in enamel surface roughness when compared to high-concentrate HP; however, it also prevented recoloration after bleaching.

Clinical Evidence of Biomimetic Hydroxyapatite in Oral Care Products for Reducing Dentin Hypersensitivity: An Updated Systematic Review and Meta-Analysis

Dentin hypersensitivity (DH) is a very common dental problem that can have a negative impact on the quality of life and can lead to invasive dental procedures. Prevention of DH and control of symptoms are highly desirable. Hydroxyapatite (HAP) has been shown in vitro to block dentinal tubules and in vivo to be a safe and effective additive in oral care products that reduce DH clinically. This study's aim was to conduct a systematic review and meta-analysis of the current evidence that HAP-containing oral care products reduce DH. Databases were searched, and only clinical trials in humans were included; studies conducted in vitro or on animals were not included. Publications in a foreign language were translated and included. We found 44 published clinical trials appropriate for systematic analysis. More than half of the trials had high-quality GRADE scores. HAP significantly reduced dentin hypersensitivity compared to placebo (39.5%; CI 95% [48.93; 30.06]), compared to fluoride (23%; CI 95% [34.18; 11.82]), and with a non-significant tendency compared to other desensitizing agents (10.2%; CI 95% [21.76; -19.26]). In conclusion, the meta-analysis showed that HAP added to oral care products is a more effective agent than fluoride in controlling dentin hypersensitivity and may be superior to other desensitizers.

Calcium-Polyphosphate Submicroparticles (CaPP) Improvement Effect of the Experimental Bleaching Gels' Chemical and Cellular-Viability Properties

The aim of this research was to develop and characterize the chemical and cellular-viability properties of an experimental high-concentration bleaching gel (35 wt%-H2O2) containing calcium-polyphosphate particles (CaPP) at two concentrations (0.5 wt% and 1.5 wt%). The CaPP submicroparticles were synthesized by coprecipitation, keeping a Ca:P ratio of 2:1. The CaPP morphology, size, and chemical and crystal profiles were characterized through scanning and transmission electron microscopy, energy-dispersive X-ray analysis, and X-ray diffraction, respectively. The assessed bleaching gels were experimental (without CaPP); 0.5% CaPP; 1.5% CaPP; and commercial. The gels’ pH values and H2O2 concentrations (iodometric titration) were determined. The odontoblast-like cell viability after a gel’s exposure was assessed by the MTT assay. The pH and H2O2 concentration were compared through a repeated-measures analysis of variance (ANOVA) and a Tukey’s test and the cell viability through a one-way ANOVA and a Tukey’s test using a GraphPad Prism (α < 0.05). The CaPP particles were spherical (with Ca and P, 135.7 ± 80.95 nm size) and amorphous. The H2O2 concentration decreased in all groups after mixing (p < 0.001). The 0.5% CaPP resulted in more-stable pH levels and higher viability levels than the experimental one (p < 0.05). The successful incorporation of CaPP had a positive impact on the bleaching gel’s chemical and cellular-viability properties when compared to the experimental gel without these particles.

Novel Experimental In-Office Bleaching Gels Containing Co-Doped Titanium Dioxide Nanoparticles

The present study reports on the development and testing of novel bleaching agents containing co-doped metaloxide nanoparticles (NP; 0%, 5%, 10% v/w) and hydrogen peroxide (HP, 0%, 6%, 15%, and 35%). Bovine blocks (n = 200, A = 36 mm2) were obtained and randomly distributed into experimental groups (n = 10/group). NPs were incorporated into gels before bleaching (3 sessions, 7 days apart, 30 min/session, irradiated with violet light-LT). Color changes (ΔE00, ΔWID), mineral content (CO32−, PO43−), and topography were assessed (spectrophotometer, ATR-FTIR, and AFM) before and after bleaching procedures (14 days). Metabolic status and three-dimensional components of non-disrupted Streptococcus mutans biofilms were investigated using a multimode reader and confocal microscopy. The results indicate that ΔE00 and ΔWID significantly increased with NPs’ concentrations and LT. The enamel’s mineral ratio was adversely impacted by HP, but alterations were less pronounced when using NP-containing gels. The enamel’s topography was not damaged by the bleaching protocols tested. The bioluminescence results show that bleaching protocols do not render latent antibacterial properties to enamel, and the confocal microscopy results demonstrate that the 3-dimensional distribution of the components was affected by the protocols. The proposed nanotechnology improved the bleaching efficacy of experimental materials independent of hydrogen peroxide or irradiation and did not adversely impact the enamel’s surface properties or its chemical content.

Remineralization Efficacy of Four Remineralizing Agents on Artificial Enamel Lesions: SEM-EDS Investigation

Dental remineralization represents the process of depositing calcium and phosphate ions into crystal voids in demineralized enamel, producing net mineral gain and preventing early enamel lesions progression. The aim of the present study was to qualitatively and quantitatively compare the remineralizing effectiveness of four commercially available agents on enamel artificial lesions using Scanning Electron Microscopy (SEM) combined with Energy Dispersive Spectroscopy (EDS) techniques. Thirty-six extracted third molars were collected and randomly assigned to six groups (n = 6), five of which were suspended in demineralizing solution for 72 h to create enamel artificial lesions, and one serving as control: G1, treated with a mousse of casein phosphopeptide and amorphous calcium−phosphate (CPP-ACP); G2, treated with a gel containing nano-hydroxyapatite; G3, treated with a 5% SF varnish; G4, treated with a toothpaste containing ACP functionalized with fluoride and carbonate-coated with citrate; G5, not-treated artificial enamel lesions; G6, not demineralized and not treated sound enamel. G1−G4 were subjected to pH cycling over a period of seven days. Analyses of the specimens’ enamel surfaces morphology were performed by SEM and EDS. Data were statistically analyzed for multiple group comparison by one-way ANOVA/Tukey’s test (p < 0.05). The results show that the Ca/P ratio of the G5 (2.00 ± 0.07) was statistically different (p < 0.05) from G1 (1.73 ± 0.05), G2 (1.76 ± 0.01), G3 (1.88 ± 0.06) and G6 (1.74 ± 0.04), while there were no differences (p > 0.05) between G1, G2 and G6 and between G4 (2.01 ± 0.06) and G5. We concluded that G1 and G2 showed better surface remineralization than G3 and G4, after 7 days of treatment.

A Titanium Tetrafluoride Experimental Gel Combined with Highly Concentrated Hydrogen Peroxide as an Alternative Bleaching Agent: An In Vitro Study

This in vitro study evaluated color change, mineral content, and morphology of enamel, pH and cytotoxicity of experimental bleaching agents containing 35% hydrogen peroxide (HP), titanium tetrafluoride (TiF4), Natrosol, and Chemygel. Sixty enamel/dentin blocks were randomly treated with (n = 10) HP; HP+Natrosol+Chemygel with different TiF4 concentrations: 0.05 g HPT0.5, 0.1 g HPT1, 0.2 g HPT2, 0.3 g HPT3, 0.4 g HPT4. Bleaching was performed in three sessions (3 × 15 min application). Color change (CIELab-ΔEab, CIEDE2000-ΔE00, ΔWID) and Knoop microhardness (KHN) were evaluated. Enamel morphology and composition were observed under scanning electron microscopy and energy-dispersive spectrometry (EDS), respectively. Cell viability of keratinocyte cells was evaluated using MTT assay. Data were analyzed by one-way ANOVA and LSD and Tukey tests, and two-way repeated measures ANOVA and Bonferroni (α = 5%). The pH and EDS were analyzed descriptively. Lightness-L* increased, and a* and b* parameters decreased, except for HPT3 and HPT4 (b*). HPT0.5, HPT1, and HPT2 exhibited ΔEab and ΔWID similar to HP. ΔE00 did not present statistical difference. HP, HPT0.5, and HPT1 promoted higher KHN. HPT0.5 exhibited no changes on enamel surface. Keratinocyte cells were viable when treated with T0.5, and weak viable for T1. Experimental agents exhibited acidic pH and Ti elements. HPT0.5 exhibited bleaching efficacy, maintained KHN without enamel alterations, and did not increase cytotoxicity.

Vibrational Imaging Techniques for the Characterization of Hard Dental Tissues: From Bench-Top to Chair-Side

Currently, various analytical techniques, including scanning electron microscopy, X-Ray diffraction, microcomputed tomography, and energy dispersive X-ray spectroscopy, are available to study the structural or elemental features of hard dental tissues. In contrast to these approaches, Raman Microspectroscopy (RMS) has the great advantage of simultaneously providing, at the same time and on the same sample, a morpho-chemical correlation between the microscopic information from the visual analysis of the sample and its chemical and macromolecular composition. Hence, RMS represents an innovative and non-invasive technique to study both inorganic and organic teeth components in vitro. The aim of this narrative review is to shed new light on the applicative potential of Raman Microspectroscopy in the dental field. Specific Raman markers representative of sound and pathological hard dental tissues will be discussed, and the future diagnostic application of this technique will be outlined. The objective and detailed information provided by this technique in terms of the structure and chemical/macromolecular components of sound and pathological hard dental tissues could be useful for improving knowledge of several dental pathologies. Scientific articles regarding RMS studies of human hard dental tissues were retrieved from the principal databases by following specific inclusion and exclusion criteria.

Hydrogen Peroxide Release Kinetics of Four Tooth Whitening Products-In Vitro Study

Tooth whitening efficacy can be influenced by several factors, of which concentration and application time are two of the most important. This in vitro study aimed to evaluate the initial content and release kinetics of the hydrogen peroxide (HP) content, or the carbamide peroxide (CP) content as converted to its HP equivalent, of four tooth whitening products with different concentrations (6% HP, 16% CP, 10% CP, and 5% CP). Titrations with Cerium Sulphate IV were performed to determine HP concentration. HP release kinetics were evaluated by a spectrophotometric technique. The results were expressed as the mean values and 95% confidence interval of the percentage of hydrogen peroxide content during release kinetics. One sample t-test, one-way ANOVA, Tukey post hoc testing, and Pearson correlation testing were used, as appropriate, with a significance level of α = 0.05. The concentration of titrated HP was higher than that indicated by the manufacturers in all tested products (p < 0.01). At the minimum application times indicated by the manufacturers, all products released at least 85% of HP content; the gel containing 10% CP registered the lowest release at 85.49 (81.52–89.46). There was a significant HP release in all products during the application times indicated by the manufacturers. Further studies are needed to assess in vitro release kinetics.

New insights from Raman MicroSpectroscopy and Scanning Electron Microscopy on the microstructure and chemical composition of vestibular and lingual surfaces in permanent and deciduous human teeth

Teeth are characterized by a specific chemical composition and microstructure, which are related to their nature, permanent and deciduous, and to the sides, lingual and vestibular. Deeper knowledge in this topic could be useful in clinical practice to develop new strategies in restorative dentistry and in the choice of materials with the best performances. In this study, Raman MicroSpectroscopy (RMS), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectrometry (EDS), and Vickers MicroHardness (VMH) were exploited to: (1) identify the microstructure and the chemical/elemental composition of permanent and deciduous human teeth, also characterizing their lingual and vestibular sides, and (2) validate a new multidisciplinary analytical approach, for obtaining multiple information on calcified tissues. All applied techniques evidenced differences between permanent and deciduous teeth both in the lingual and vestibular sides. In particular, scanning electron micrographs identified areas with an irregular appearance in the vestibular and lingual sides, which presented also different VMH values. Moreover, RMS and EDS displayed a different chemical/elemental composition in outer and inner enamel and dentin, in terms of Mineral/Matrix, Crystallinity, Carbonates/phosphates, and concentrations by weight (%) of calcium, phosphorous, carbon, magnesium, and sodium. A good linear correlation was found between RMS spectral profiles and EDS and VMH measurements, suggesting that RMS may be considered a useful and non-destructive diagnostic tool for obtaining multiple information on calcified tissues.

A Comparative Evaluation of Nanohydroxyapatite-Enriched Hydrogen Peroxide Home Bleaching System on Color, Hardness and Microstructure of Dental Enamel

This study aimed to evaluate two hydrogen peroxide (HP)-based at-home bleaching systems in order to analyze whether nano-hydroxyapatite (nHA) addition may represent a reliable and safe solution for tooth whitening without altering dental microstructure and hardness. Human third molars (N = 15) were treated with two bleaching agents, one containing 6%HP (6HP) and the other 6% HP nHA-enriched (6HP-nHA) with average particle diameter ranging from 5-20 nm. Their effects on enamel were assessed using a spectrophotometer, Vickers microhardness (VMH) test and Scanning Electron Microscopy (SEM), comparing the treated groups with the non-treated control group (CTR). Color analysis revealed improvement in whiteness in both groups compared to CTR. VMH test results showed no differences among the groups. SEM analysis highlighted no evident changes in the enamel microstructure of tested groups compared to CTR. At high magnification, in 6HP group, a slight increase in irregularities of enamel surface morphology was observed, while 6HP-nHA group displayed removal of the aprismatic layer but preservation of the intact prismatic structure. These results suggest that the 6HP-nHA agent may be recommended to provide reliable whitening treatment, without damaging the enamel micromorphology and hardness.