Validation experiments on finite element models of an ostrich (Struthio camelus) cranium

Quantitative investigation of pengornithid enantiornithine diet reveals macrocarnivorous ecology evolved in birds by Early Cretaceous

The diet of Mesozoic birds is poorly known, limiting evolutionary understanding of birds' roles in modern ecosystems. Pengornithidae is one of the best understood families of Mesozoic birds, hypothesized to eat insects or only small amounts of meat. We investigate these hypotheses with four lines of evidence: estimated body mass, claw traditional morphometrics, jaw mechanical advantage, and jaw finite element analysis. Owing to limited data, the diets of Eopengornis and Chiappeavis remain obscure. Pengornis, Parapengornis, and Yuanchuavis show adaptations for vertebrate carnivory. Pengornis also has talons similar to living raptorial birds like caracaras that capture and kill large prey, which represents the earliest known adaptation for macrocarnivory in a bird. This supports the appearance of this ecology ∼35 million years earlier than previously thought. These findings greatly increase the niche breadth known for Early Cretaceous birds, and shift the prevailing view that Mesozoic birds mainly occupied low trophic levels.

Assessment of the mechanical role of cranial sutures in the mammalian skull: Computational biomechanical modelling of the rat skull

Cranial sutures are fibrocellular joints between the skull bones that are progressively replaced with bone throughout ontogeny, facilitating growth and cranial shape change. This transition from soft tissue to bone is reflected in the biomechanical properties of the craniofacial complex. However, the mechanical significance of cranial sutures has only been explored at a few localised areas within the mammalian skull, and as such our understanding of suture function in overall skull biomechanics is still limited. Here, we sought to determine how the overall strain environment is affected by the complex network of cranial sutures in the mammal skull. We combined two computational biomechanical methods, multibody dynamics analysis and finite element analysis, to simulate biting in a rat skull and compared models with and without cranial sutures. Our results show that including complex sutures in the rat model does not substantially change overall strain gradients across the cranium, particularly strain magnitudes in the bones overlying the brain. However, local variations in strain magnitudes and patterns can be observed in areas close to the sutures. These results show that, during feeding, sutures may be more important in some regions than others. Sutures should therefore be included in models that require accurate local strain magnitudes and patterns of cranial strain, particularly if models are developed for analysis of specific regions, such as the temporomandibular joint or zygomatic arch. Our results suggest that, for mammalian skulls, cranial sutures might be more important for allowing brain expansion during growth than redistributing biting loads across the cranium in adults.

Enhancing biomedical data validity with standardized segmentation finite element analysis

Finite element analysis is a powerful computational technique for augmenting biomedical research, prosthetics design, and preoperative surgical assessment. However, the validity of biomechanical data obtained from finite element analysis is dependent on the quality of the preceding data processing. Until now, little information was available about the effect of the segmentation process on finite element models and biomechanical data. The current investigation applied 4 segmentation approaches to 129 femur specimens, yielding a total of 516 finite element models. Biomechanical data including average displacement, pressure, stress, and strain were collected from experimental groups based on the different segmentation approaches. The results indicate that only a 5.0% variation in the segmentation process leads to statistically significant differences in all 4 biomechanical measurements. These results suggest that it is crucial for consistent segmentation procedures to be applied to all specimens within a study. This methodological advancement will help to ensure that finite element data will be more accurate and that research conclusions will have greater validity.

Diet of Mesozoic toothed birds (Longipterygidae) inferred from quantitative analysis of extant avian diet proxies

Background

Birds are key indicator species in extant ecosystems, and thus we would expect extinct birds to provide insights into the nature of ancient ecosystems. However, many aspects of extinct bird ecology, particularly their diet, remain obscure. One group of particular interest is the bizarre toothed and long-snouted longipterygid birds. Longipterygidae is the most well-understood family of enantiornithine birds, the dominant birds of the Cretaceous period. However, as with most Mesozoic birds, their diet remains entirely speculative.

Results

To improve our understanding of longipterygids, we investigated four proxies in extant birds to determine diagnostic traits for birds with a given diet: body mass, claw morphometrics, jaw mechanical advantage, and jaw strength via finite element analysis. Body mass of birds tended to correspond to the size of their main food source, with both carnivores and herbivores splitting into two subsets by mass: invertivores or vertivores for carnivores, and granivores + nectarivores or folivores + frugivores for herbivores. Using claw morphometrics, we successfully distinguished ground birds, non-raptorial perching birds, and raptorial birds from one another. We were unable to replicate past results isolating subtypes of raptorial behaviour. Mechanical advantage was able to distinguish herbivorous diets with particularly high values of functional indices, and so is useful for identifying these specific diets in fossil taxa, but overall did a poor job of reflecting diet. Finite element analysis effectively separated birds with hard and/or tough diets from those eating foods which are neither, though could not distinguish hard and tough diets from one another. We reconstructed each of these proxies in longipterygids as well, and after synthesising the four lines of evidence, we find all members of the family but Shengjingornis (whose diet remains inconclusive) most likely to be invertivores or generalist feeders, with raptorial behaviour likely in Longipteryx and Rapaxavis.

Conclusions

This study provides a 20% increase in quantitatively supported fossil bird diets, triples the number of diets reconstructed in enantiornithine species, and serves as an important first step in quantitatively investigating the origins of the trophic diversity of living birds. These findings are consistent with past hypotheses that Mesozoic birds occupied low trophic levels.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12915-022-01294-3.

2D and 3D visualizations of archosaur jaw muscle mechanics, ontogeny and phylogeny using ternary diagrams and 3D modeling

Comparing patterns of performance and kinematics across behavior, development and phylogeny is crucial to understand the evolution of complex musculoskeletal systems such as the feeding apparatus. However, conveying 3D spatial data of muscle orientation throughout a feeding cycle, ontogenetic pathway or phylogenetic lineage is essential to understanding the function and evolution of the skull in vertebrates. Here, we detail the use of ternary plots for displaying and comparing the 3D orientation of muscle data. First, we illustrate changes in 3D jaw muscle resultants during jaw closing taxa the American alligator (Alligator mississippiensis). Second, we show changes in 3D muscle resultants of jaw muscles across an ontogenetic series of alligators. Third, we compare 3D resultants of jaw muscles of avian-line dinosaurs, including extant (Struthio camelus, Gallus gallus, Psittacus erithacus) and extinct (Tyrannosaurus rex) species to outline the reorganization of jaw muscles that occurred along the line to modern birds. Finally, we compare 3D resultants of jaw muscles of the hard-biting species in our sample (A. mississippiensis, T. rex, P. erithacus) to illustrate how disparate jaw muscle resultants are employed in convergent behaviors in archosaurs. Our findings show that these visualizations of 3D components of jaw muscles are immensely helpful towards identifying patterns of cranial performance, growth and diversity. These tools will prove useful for testing other hypotheses in functional morphology, comparative biomechanics, ecomorphology and organismal evolution.

Cranial functional morphology of the pseudosuchian Effigia and implications for its ecological role in the Triassic

Pseudosuchians, archosaurian reptiles more closely related to crocodylians than to birds, exhibited high morphological diversity during the Triassic with numerous examples of morphological convergence described between Triassic pseudosuchians and post-Triassic dinosaurs. One example is the shuvosaurid Effigia okeeffeae which exhibits an "ostrich-like" bauplan comprising a gracile skeleton with edentulous jaws and large orbits, similar to ornithomimid dinosaurs and extant palaeognaths. This bauplan is regarded as an adaptation for herbivory, but this hypothesis assumes morphological convergence confers functional convergence, and has received little explicit testing. Here, we restore the skull morphology of Effigia, perform myological reconstructions, and apply finite element analysis to quantitatively investigate skull function. We also perform finite element analysis on the crania of the ornithomimid dinosaur Ornithomimus edmontonicus, the extant palaeognath Struthio camelus and the extant pseudosuchian Alligator mississippiensis to assess the degree of functional convergence with a taxon that exhibit "ostrich-like" bauplans and its closest extant relatives. We find that Effigia possesses a mosaic of mechanically strong and weak features, including a weak mandible that likely restricted feeding to the anterior portion of the jaws. We find limited functional convergence with Ornithomimus and Struthio and limited evidence of phylogenetic constraints with extant pseudosuchians. We infer that Effigia was a specialist herbivore that likely fed on softer plant material, a niche unique among the study taxa and potentially among contemporaneous Triassic herbivores. This study increases the known functional diversity of pseudosuchians and highlights that superficial morphological similarity between unrelated taxa does not always imply functional and ecological convergence.

Modeling tooth enamel in FEA comparisons of skulls: Comparing common simplifications with biologically realistic models

Palaeontologists often use finite element analyses, in which forces propagate through objects with specific material properties, to investigate feeding biomechanics. Teeth are usually modeled with uniform properties (all bone or all enamel). In reality, most teeth are composed of pulp, dentine, and enamel. We tested how simplified teeth compare to more realistic models using mandible models of three reptiles. For each, we created models representing enamel thicknesses found in extant taxa, as well as simplified models (bone, dentine or enamel). Our results suggest that general comparisons of stress distribution among distantly related taxa do not require representation of dental tissues, as there was no noticeable effect on heatmap representations of stress. However, we find that representation of dental tissues impacts bite force estimates, although magnitude of these effects may differ depending on constraints. Thus, as others have shown, the detail necessary in a biomechanical model relates to the questions being examined.

The diet of early birds based on modern and fossil evidence and a new framework for its reconstruction

Birds are some of the most diverse organisms on Earth, with species inhabiting a wide variety of niches across every major biome. As such, birds are vital to our understanding of modern ecosystems. Unfortunately, our understanding of the evolutionary history of modern ecosystems is hampered by knowledge gaps in the origin of modern bird diversity and ecosystem ecology. A crucial part of addressing these shortcomings is improving our understanding of the earliest birds, the non-avian avialans (i.e. non-crown birds), particularly of their diet. The diet of non-avian avialans has been a matter of debate, in large part because of the ambiguous qualitative approaches that have been used to reconstruct it. Here we review methods for determining diet in modern and fossil avians (i.e. crown birds) as well as non-avian theropods, and comment on their usefulness when applied to non-avian avialans. We use this to propose a set of comparable, quantitative approaches to ascertain fossil bird diet and on this basis provide a consensus of what we currently know about fossil bird diet. While no single approach can precisely predict diet in birds, each can exclude some diets and narrow the dietary possibilities. We recommend combining (i) dental microwear, (ii) landmark-based muscular reconstruction, (iii) stable isotope geochemistry, (iv) body mass estimations, (v) traditional and/or geometric morphometric analysis, (vi) lever modelling, and (vii) finite element analysis to reconstruct fossil bird diet accurately. Our review provides specific methodologies to implement each approach and discusses complications future researchers should keep in mind. We note that current forms of assessment of dental mesowear, skull traditional morphometrics, geometric morphometrics, and certain stable isotope systems have yet to be proven effective at discerning fossil bird diet. On this basis we report the current state of knowledge of non-avian avialan diet which remains very incomplete. The ancestral dietary condition in non-avian avialans remains unclear due to scarce data and contradictory evidence in Archaeopteryx. Among early non-avian pygostylians, Confuciusornis has finite element analysis and mechanical advantage evidence pointing to herbivory, whilst Sapeornis only has mechanical advantage evidence indicating granivory, agreeing with fossilised ingested material known for this taxon. The enantiornithine ornithothoracine Shenqiornis has mechanical advantage and pedal morphometric evidence pointing to carnivory. In the hongshanornithid ornithuromorph Hongshanornis only mechanical advantage evidence indicates granivory, but this agrees with evidence of gastrolith ingestion in this taxon. Mechanical advantage and ingested fish support carnivory in the songlingornithid ornithuromorph Yanornis. Due to the sparsity of robust dietary assignments, no clear trends in non-avian avialan dietary evolution have yet emerged. Dietary diversity seems to increase through time, but this is a preservational bias associated with a predominance of data from the Early Cretaceous Jehol Lagerstätte. With this new framework and our synthesis of the current knowledge of non-avian avialan diet, we expect dietary knowledge and evolutionary trends to become much clearer in the coming years, especially as fossils from other locations and climates are found. This will allow for a deeper and more robust understanding of the role birds played in Mesozoic ecosystems and how this developed into their pivotal role in modern ecosystems.

How does bone strain vary between the third metacarpal and the proximal phalangeal bones of the equine distal limb?

Strain parameters at injury prone sites of the equine third metacarpal (MC3) and proximal phalangeal (P1) bones were investigated with the aim of improving understanding of injury pathogenesis. We hypothesized that dorsal principal and shear strain patterns, magnitudes and directions would differ from proximal-to-distal; and would be similar from medial-to-lateral across each bone. Unilateral limbs from nine equine cadavers were instrumented with rosette strain gauges during limb loading to 10,500 N. Gauges were attached at seven dorsal sites: middle MC3, distal MC3 (medial, middle, lateral) and proximal P1 (medial, middle, lateral). Outcome measures were analysed with repeated measures analysis of variance. Distal MC3 had the greatest, and proximal P1 the smallest magnitude of minimum principal and shear strains. Directions of maximum and minimum principal strain were similar at the middle and distal MC3 sites with a 20-40° direction difference compared to proximal P1. The patterns of strain magnitude and direction were similar from medial-to-lateral on distal MC3 but varied in pattern and magnitude among the P1 sites. Overall, as load reached maximum, direction of minimum principal strain became more axial in orientation, converging from opposite directions between bones, potentially maximising stability of the distal limb. The difference in strain parameters and strain ratio for adjacent anatomic sites on distal MC3 and proximal P1 was not anticipated, in light of the anatomic congruity of the metacarpophalangeal joint. Based on the predominance of shear strain across proximal P1, shear forces are likely the predominant biomechanical contributor to sagittal fractures of P1.

Disassociated rhamphotheca of fossil bird Confuciusornis informs early beak reconstruction, stress regime, and developmental patterns

Soft tissue preservation in fossil birds provides a rare window into their anatomy, function, and development. Here, we present an exceptionally-preserved specimen of Confuciusornis which, through Laser-Stimulated Fluorescence imaging, is identified as preserving a disassociated rhamphotheca. Reconstruction of the in vivo position of the rhamphotheca validates the association of the rhamphotheca with two previous confuciusornithid specimens while calling that of a third specimen into question. The ease of dissociation is discussed and proposed with a fourth specimen alongside finite element analysis as evidence for preferential soft-food feeding. However, this proposition remains tentative until there is a better understanding of the functional role of beak attachment in living birds. Differences in post-rostral extent and possibly rhamphotheca curvature between confuciusornithids and modern birds hint at developmental differences between the two. Together, this information provides a wealth of new information regarding the nature of the beak outside crown Aves.

Birds have peramorphic skulls, too: anatomical network analyses reveal oppositional heterochronies in avian skull evolution

In contrast to the vast majority of reptiles, the skulls of adult crown birds are characterized by a high degree of integration due to bone fusion, e.g., an ontogenetic event generating a net reduction in the number of bones. To understand this process in an evolutionary context, we investigate postnatal ontogenetic changes in the skulls of crown bird and non-avian theropods using anatomical network analysis (AnNA). Due to the greater number of bones and bone contacts, early juvenile crown birds have less integrated skulls, resembling their non-avian theropod ancestors, including Archaeopteryx lithographica and Ichthyornis dispars. Phylogenetic comparisons indicate that skull bone fusion and the resulting modular integration represent a peramorphosis (developmental exaggeration of the ancestral adult trait) that evolved late during avialan evolution, at the origin of crown-birds. Succeeding the general paedomorphic shape trend, the occurrence of an additional peramorphosis reflects the mosaic complexity of the avian skull evolution.

Plateau and Foth use anatomical network analysis to study the evolution of avian skull anatomy. They report that the ontogenetic changes in the morphology and modularity of the avian skulls is comparable to evolutionary transformations from non-avian theropods to modern birds. Their work highlights the complexity of avian skull evolution.

Dietary niche and the evolution of cranial morphology in birds

Cranial morphology in birds is thought to be shaped by adaptive evolution for foraging performance. This understanding of ecomorphological evolution is supported by observations of avian island radiations, such as Darwin's finches, which display rapid evolution of skull shape in response to food resource availability and a strong fit between cranial phenotype and trophic ecology. However, a recent analysis of larger clades has suggested that diet is not necessarily a primary driver of cranial shape and that phylogeny and allometry are more significant factors in skull evolution. We use phenome-scale morphometric data across the breadth of extant bird diversity to test the influence of diet and foraging behaviour in shaping cranial evolution. We demonstrate that these trophic characters are significant but very weak predictors of cranial form at this scale. However, dietary groups exhibit significantly different rates of morphological evolution across multiple cranial regions. Granivores and nectarivores exhibit the highest rates of evolution in the face and cranial vault, whereas terrestrial carnivores evolve the slowest. The basisphenoid, occipital, and jaw joint regions have less extreme differences among dietary groups. These patterns demonstrate that dietary niche shapes the tempo and mode of phenotypic evolution in deep time, despite a weaker than expected form–function relationship across large clades.

The use of extruded finite-element models as a novel alternative to tomography-based models: a case study using early mammal jaws

Finite-element (FE) analysis has been used in palaeobiology to assess the mechanical performance of the jaw. It uses two types of models: tomography-based three-dimensional (3D) models (very accurate, not always accessible) and two-dimensional (2D) models (quick and easy to build, good for broad-scale studies, cannot obtain absolute stress and strain values). Here, we introduce extruded FE models, which provide fairly accurate mechanical performance results, while remaining low-cost, quick and easy to build. These are simplified 3D models built from lateral outlines of a relatively flat jaw and extruded to its average width. There are two types: extruded (flat mediolaterally) and enhanced extruded (accounts for width differences in the ascending ramus). Here, we compare mechanical performance values resulting from four types of FE models (i.e. tomography-based 3D, extruded, enhanced extruded and 2D) in Morganucodon and Kuehneotherium. In terms of absolute values, both types of extruded model perform well in comparison to the tomography-based 3D models, but enhanced extruded models perform better. In terms of overall patterns, all models produce similar results. Extruded FE models constitute a viable alternative to the use of tomography-based 3D models, particularly in relatively flat bones.

Cranial suture biomechanics in Metoposaurus krasiejowensis (Temnospondyli, Stereospondyli) from the upper Triassic of Poland

Cranial sutures connect adjacent bones of the skull and play an important role in the absorption of stresses that may occur during different activities. The Late Triassic temnospondyl amphibian Metoposaurus krasiejowensis has been extensively studied over the years in terms of skull biomechanics, but without a detailed description of the function of cranial sutures. In the present study, 34 thin sections of cranial sutures were examined in order to determine their histovariability and interpret their biomechanical role in the skull. The histological model was compared with three-dimensional-finite element analysis (FEA) simulations of the skull under bilateral and lateral biting as well as skull-raising loads for maximum and minimum principal stress. Histologically, only two sutural morphologies were recognised in the skull of Metoposaurus: interdigitated sutures (commonly associated with compressive stresses) are dominant along the entire length of the skull roof and palate; tongue-and-groove sutures (commonly associated with tensile stresses) are present across the maxilla. FEA shows a much more complex picture of stress type and distribution than predicted by sutures. Common to both methods is a predominance of compressive stresses which act on the skull during biting. The methods predict different stress regimes during biting in the posterior part of the skull: where histological analysis suggests compression, FEA predicts tension. For lateral biting and skull raising, histological and digital reconstructions show similar general patterns but with some variations.

Palatal Biomechanics and Its Significance for Cranial Kinesis in Tyrannosaurus rex

The extinct nonavian dinosaur Tyrannosaurus rex, considered one of the hardest biting animals ever, is often hypothesized to have exhibited cranial kinesis, or, mobility of cranial joints relative to the braincase. Cranial kinesis in T. rex is a biomechanical paradox in that forcefully biting tetrapods usually possess rigid skulls instead of skulls with movable joints. We tested the biomechanical performance of a tyrannosaur skull using a series of static positions mimicking possible excursions of the palate to evaluate Postural Kinetic Competency in Tyrannosaurus. A functional extant phylogenetic bracket was employed using taxa, which exhibit measurable palatal excursions: Psittacus erithacus (fore-aft movement) and Gekko gecko (mediolateral movement). Static finite element models of Psittacus, Gekko, and Tyrannosaurus were constructed and tested with different palatal postures using anatomically informed material properties, loaded with muscle forces derived from dissection, phylogenetic bracketing, and a sensitivity analysis of muscle architecture and tested in orthal biting simulations using element strain as a proxy for model performance. Extant species models showed lower strains in naturally occurring postures compared to alternatives. We found that fore-aft and neutral models of Tyrannosaurus experienced lower overall strains than mediolaterally shifted models. Protractor muscles dampened palatal strains, while occipital constraints increased strains about palatocranial joints compared to jaw joint constraints. These loading behaviors suggest that even small excursions can strain elements beyond structural failure. Thus, these postural tests of kinesis, along with the robusticity of other cranial features, suggest that the skull of Tyrannosaurus was functionally akinetic. Anat Rec, 303:999-1017, 2020. © 2019 Wiley Periodicals, Inc.

Warped finite element models predict whole shell failure in turtle shells

Finite element (FE) models have become increasingly popular in comparative biomechanical studies, with researchers continually developing methods such as 'warping' preexisting models to facilitate analyses. However, few studies have investigated how well FE models can predict biologically crucial whole-structure performance or whether 'warped' models can provide useful information about the mechanical behavior of actual specimens. This study addresses both of these issues through a validation of warped FE models of turtle shells. FE models for 40 turtle specimens were built using 3D landmark coordinates and thin-plate spline interpolations to warp preexisting turtle shell models. Each actual turtle specimen was loaded to failure, and the load at failure and mode of fracture were then compared with the behavior predicted by the models. Overall, the models performed very well, despite the fact that many simplifying assumptions were made for analysis. Regressions of observed on predicted loads were significant for the dataset as a whole, as well as in separate analyses within two turtle species, and the direction of fracture was generally consistent with the patterns of stresses observed in the models. This was true even when size (an important factor in determining strength) was removed from analyses - the models were also able to predict which shells would be relatively stronger or weaker. Although some residual variation remains unexplained, this study supports the idea that warped FE models run with simplifying assumptions at least can provide useful information for comparative biomechanical studies.

Computational biomechanical analyses demonstrate similar shell-crushing abilities in modern and ancient arthropods

The biology of the American horseshoe crab, Limulus polyphemus, is well documented-including its dietary habits, particularly the ability to crush shell with gnathobasic walking appendages-but virtually nothing is known about the feeding biomechanics of this iconic arthropod. Limulus polyphemus is also considered the archetypal functional analogue of various extinct groups with serial gnathobasic appendages, including eurypterids, trilobites and other early arthropods, especially Sidneyia inexpectans from the mid-Cambrian (508 Myr) Burgess Shale of Canada. Exceptionally preserved specimens of S. inexpectans show evidence suggestive of durophagous (shell-crushing) tendencies-including thick gnathobasic spine cuticle and shelly gut contents-but the masticatory capabilities of this fossil species have yet to be compared with modern durophagous arthropods. Here, we use advanced computational techniques, specifically a unique application of 3D finite-element analysis (FEA), to model the feeding mechanics of L. polyphemus and S. inexpectans: the first such analyses of a modern horseshoe crab and a fossil arthropod. Results show that mechanical performance of the feeding appendages in both arthropods is remarkably similar, suggesting that S. inexpectans had similar shell-crushing capabilities to L. polyphemus This biomechanical solution to processing shelly food therefore has a history extending over 500 Myr, arising soon after the first shell-bearing animals. Arrival of durophagous predators during the early phase of animal evolution undoubtedly fuelled the Cambrian 'arms race' that involved a rapid increase in diversity, disparity and abundance of biomineralized prey species.

Dietary material properties shape cranial suture morphology in the mouse calvarium

Cranial sutures are fibrous connective tissue articulations found between intramembranous bones of the vertebrate cranium. Growth and remodeling of these tissues is partially regulated by biomechanical loading patterns that include stresses related to chewing. Advances in oral processing structure and function of the cranium that enabled mammalian-style chewing is commonly tied to the origins and evolution of this group. To what degree masticatory overuse or underuse shapes the complexity and ossification around these articulations can be predicted based on prior experimental and comparative work. Here, we report on a mouse model system that has been used to experimentally manipulate dietary material properties in order to investigate cranial suture morphology. Experimental groups were fed diets of contrasting material properties. A masticatory overuse group was fed pelleted rodent chow, nuts with shells, and given access to cotton bedding squares. An underuse group was deprived of cotton bedding as well as diverse textured food, and instead received gelatinized food continuously. Animals were raised from weaning to adulthood on these diets, and sagittal, coronal and lambdoid suture morphology was compared between groups. Predicted intergroup variation was observed in mandibular corpus size and calvarial suture morphology, suggesting that masticatory overuse is associated with jaw and suture growth. The anterior region of the sagittal suture where it intersects with the coronal suture (bregma) showed no effect from the experiment. The posterior sagittal suture where it intersects with the lambdoid sutures (lambda) was more complex in the overuse group. In other words, the posterior calvarium was responsive to dietary material property demands while the anterior calvarium was not. This probably resulted from the different strain magnitudes and/or strain frequencies that occurred during overuse diets with diverse material properties as compared with underuse diets deprived of such enrichment. This work highlights the contrasting pattern of the sutural response to loading differences within the calvarium as a result of diet.

The biomechanical role of the chondrocranium and sutures in a lizard cranium

The role of soft tissues in skull biomechanics remains poorly understood. Not least, the chondrocranium, the portion of the braincase which persists as cartilage with varying degrees of mineralization. It also remains commonplace to overlook the biomechanical role of sutures despite evidence that they alter strain distribution. Here, we examine the role of both the sutures and the chondrocranium in the South American tegu lizard Salvator merianae We use multi-body dynamics analysis (MDA) to provide realistic loading conditions for anterior and posterior unilateral biting and a detailed finite element model to examine strain magnitude and distribution. We find that strains within the chondrocranium are greatest during anterior biting and are primarily tensile; also that strain within the cranium is not greatly reduced by the presence of the chondrocranium unless it is given the same material properties as bone. This result contradicts previous suggestions that the anterior portion (the nasal septum) acts as a supporting structure. Inclusion of sutures to the cranium model not only increases overall strain magnitudes but also leads to a more complex distribution of tension and compression rather than that of a beam under sagittal bending.

The jaw is a second-class lever in Pedetes capensis (Rodentia: Pedetidae)

The mammalian jaw is often modelled as a third-class lever for the purposes of biomechanical analyses, owing to the position of the resultant muscle force between the jaw joint and the teeth. However, it has been proposed that in some rodents the jaws operate as a second-class lever during distal molar bites, owing to the rostral position of the masticatory musculature. In particular, the infraorbital portion of the zygomatico-mandibularis (IOZM) has been suggested to be of major importance in converting the masticatory system from a third-class to a second-class lever. The presence of the IOZM is diagnostic of the hystricomorph rodents, and is particularly well-developed in Pedetes capensis, the South African springhare. In this study, finite element analysis (FEA) was used to assess the lever mechanics of the springhare masticatory system, and to determine the function of the IOZM. An FE model of the skull of P. capensis was constructed and loaded with all masticatory muscles, and then solved for biting at each tooth in turn. Further load cases were created in which each masticatory muscle was removed in turn. The analyses showed that the mechanical advantage of the springhare jaws was above one at all molar bites and very close to one during the premolar bite. Removing the IOZM or masseter caused a drop in mechanical advantage at all bites, but affected strain patterns and cranial deformation very little. Removing the ZM had only a small effect on mechanical advantage, but produced a substantial reduction in strain and deformation across the skull. It was concluded that the masticatory system of P. capensis acts as a second class lever during bites along almost the entire cheek tooth row. The IOZM is clearly a major contributor to this effect, but the masseter also has a part to play. The benefit of the IOZM is that it adds force without substantially contributing to strain or deformation of the skull. This may help explain why the hystricomorphous morphology has evolved multiple times independently within Rodentia.

Bony Pits in the Ostrich (Struthio camelus) and Emu (Dromaius novaehollandiae) Bill Tip

A specialized region of the bill tip characterized by a complex arrangement of mechanoreceptors and referred to as a bill tip organ, has been identified in numerous avians. A bill tip organ was initially inferred in kiwi species by the presence of numerous, bony pits in the rostrum of the bill, and later confirmed histologically. This study enumerates and compares the number and distribution of pits present in the bill tip in the ostrich and emu. The heads from 10 ostrich and 5 emu were prepared for osteological examination. The pattern and total number of pits was similar between the two species. However, the ostrich had significantly more pits in the regions underlying the Culmen and Gonys, whereas the emu displayed significantly more pits in the dorsal part of the mandibular rostrum. The relatively even distribution of pits in the inner and outer surfaces of both the mandibular and maxillary rostra suggest that the bill tip of the ostrich and emu are equally sensitive externally and intra-orally, as opposed to probing birds, where the major concentration of pits is located on the outer surfaces of the bill tips. The presence of pits in the bill tips of extant paleaognaths may be of relevance in interpreting the pits in the rostra of extinct therapod dinosaurs. The presence of bony pits in a region which is also well supplied with sensory nerves is highly suggestive of a bill tip organ in the ostrich and emu and which needs to be confirmed histologically. Anat Rec, 300:1705-1715, 2017. © 2017 Wiley Periodicals, Inc.

Building Finite Element Models to Investigate Zebrafish Jaw Biomechanics

Skeletal morphogenesis occurs through tightly regulated cell behaviors during development; many cell types alter their behavior in response to mechanical strain. Skeletal joints are subjected to dynamic mechanical loading. Finite element analysis (FEA) is a computational method, frequently used in engineering that can predict how a material or structure will respond to mechanical input. By dividing a whole system (in this case the zebrafish jaw skeleton) into a mesh of smaller 'finite elements', FEA can be used to calculate the mechanical response of the structure to external loads. The results can be visualized in many ways including as a 'heat map' showing the position of maximum and minimum principal strains (a positive principal strain indicates tension while a negative indicates compression. The maximum and minimum refer the largest and smallest strain). These can be used to identify which regions of the jaw and therefore which cells are likely to be under particularly high tensional or compressional loads during jaw movement and can therefore be used to identify relationships between mechanical strain and cell behavior. This protocol describes the steps to generate Finite Element models from confocal image data on the musculoskeletal system, using the zebrafish lower jaw as a practical example. The protocol leads the reader through a series of steps: 1) staining of the musculoskeletal components, 2) imaging the musculoskeletal components, 3) building a 3 dimensional (3D) surface, 4) generating a mesh of Finite Elements, 5) solving the FEA and finally 6) validating the results by comparison to real displacements seen in movements of the fish jaw.