Experience in retake analysis for digital mammography at a university hospital

Data from one digital mammograph (flat detector active area of 19.2 × 23 cm(2)) were collected over a 1-year period using locally developed software in order to evaluate retakes, their rates, their causes and the possible measures to reduce their occurrence. Among them, 7.1 % of the images were marked as repetitions, and in 16 % of the studies, at least one image was repeated. When evaluating causes of retakes, the primary cause was incorrect positioning (49 %), closely followed by additional retakes in cases of large breasts (44 %). When dealing with large breasts and using a small flat panel, additional images were necessary to fully visualise the breast, and as a consequence, some breast regions received repeated radiation exposure. Moreover, a small detector increases retakes in breasts slightly wrongly positioned. To try and reduce the retake rate, it is important to plan training sessions based on images selected from the retake analysis.

Automatic patient dose registry and clinical audit on line for mammography

The use of automatic registry systems for patient dose in digital mammography allows clinical audit and patient dose analysis of the whole sample of individual mammography exposures while fulfilling the requirements of the European Directives and other international recommendations. Further parameters associated with radiation exposure (tube voltage, X-ray tube output and HVL values for different kVp and target/filter combinations, breast compression, etc.) should be periodically verified and used to evaluate patient doses. This study presents an experience in routine clinical practice for mammography using automatic systems.

Benefits of an automatic patient dose registry system for interventional radiology and cardiology at five hospitals of the Madrid area

The purpose of this article is to present the results of connecting the interventional radiology and cardiology laboratories of five university hospitals to a unique server using an automatic patient dose registry system (Dose On Line for Interventional Radiology, DOLIR) developed in-house, and to evaluate its feasibility more than a year after its introduction. The system receives and stores demographic and dosimetric parameters included in the MPPS DICOM objects sent by the modalities to a database. A web service provides a graphical interface to analyse the information received. During 2013, the system processed 10 788 procedures (6874 cardiac, 2906 vascular and 1008 neuro interventional). The percentages of patients requiring clinical follow-up due to potential tissue reactions before and after the use of DOLIR are presented. The system allowed users to verify in real-time, if diagnostic (or interventional) reference levels are fulfilled.

Automatic management system for dose parameters in interventional radiology and cardiology

The purpose of this work was to develop an automatic management system to archive and analyse the major study parameters and patient doses for fluoroscopy guided procedures performed in cardiology and interventional radiology systems. The X-ray systems used for this trial have the capability to export at the end of the procedure and via e-mail the technical parameters of the study and the patient dose values. An application was developed to query and retrieve from a mail server, all study reports sent by the imaging modality and store them on a Microsoft SQL Server data base. The results from 3538 interventional study reports generated by 7 interventional systems were processed. In the case of some technical parameters and patient doses, alarms were added to receive malfunction alerts so as to immediately take appropriate corrective actions.

Quality control and patient dosimetry in digital radiology. On line system: new features and transportability

New features have been added to a system (QCONLINE) for auditing patient dosimetric and technical parameters 'on line', working on a digital radiology department and using the information contained in the DICOM header of some modalities. The audit of other parameters than patient doses have been included, setting alarm conditions to alert on malfunction of the X-ray system or bad operation modes, in addition to the evaluation of patient doses. A new module to analyse, collect and process the relevant information transferred by the modality performed procedure step (MPPS) service has been launched. Several examples with the exploitation of the new features are presented. The transportability of the system has been tested in two remote hospitals during several months. The new MPPS module has demonstrated to be a good tool to complement the information existing in the DICOM header. The system allows to help in the optimisation of digital radiology departments managing patient dosimetry and procedure data in real time.

Patient dosimetry and image quality in digital radiology from online audit of the X-ray system

The present work describes an online patient dosimetry and an image quality system in digital radiology. For the patient dosimetry audit, current mean values of entrance surface dose (ESD) were compared with local and national reference values (RVs) for the specific examination type evaluated. Mean values exceeding the RV trigger an alarm signal and then an evaluation of the technical parameters, operational practice and image quality was begun, using data available in the DICOM header to derive any abnormal settings or performance to obtain the image. The X-ray tube output for different kVp values is measured periodically, to allow for the automatic calculation of ESD. The system allows also for image audit, linking the dose imparted, the image quality and the alarm condition, if produced. Results and the benefits derived from this online quality control are discussed here.

On the use of DICOM cine header information for optimisation: results from the 2002 European DIMOND cardiology survey

The paper explores the level of information contained within the DICOM header in images from various cardiology systems. Data were obtained in the European DIMOND survey on image quality (Italy, Ireland, Belgium, Greece and Spain). Images from five standard diagnostic cardiology procedures carried out in six European hospitals have been analysed. DICOM header information was extracted to a database in order to analyse how it could help in the optimisation of the procedures. The level of data contained in the headers differs widely between cardiology systems. None of the X-ray systems in the 2002 survey archives the dosimetric data in the DICOM header. The mean number of runs per procedure ranges between 7.5 and 15.4 and the mean number of frames per procedure between 575 and 1417. Differences in kVp, mA, pulse time, distances and C-arm angulations are substantial and suggest that there exists a wide range for optimisation.

A survey of patient dose and clinical factors in a full-field digital mammography system

In this work, we analyse the dose to 5034 patients (20 137 images) who underwent mammographic examinations with a full-field digital mammography (FFDM) system over a 2-y period. The information relevant to this study has been extracted from the image Digital Imaging and Communications in Medicine (DICOM) headers. Entrance surface air-kerma (ESAK) without backscatter and average glandular dose (AGD) were estimated following the methodology proposed in the European Protocol on Dosimetry in Mammography. Mean values for patient age and compressed breast thickness were 56 +/- 11 y and 52 +/- 13 mm, respectively. The mean ESAK value was 8.1 mGy and the mean AGD was 1.9 mGy. In addition, the dose values from both FFDM and screening-film mammographic (SFM) examinations were compared. The third quartile (TQ) of the ESAK values delivered by the FFDM system was 33% lower and 32% higher than the TQ for SFM with slow and fast screen/film receptors. Differences between dose values for cranio-caudal (CC) and medio-lateral oblique (MLO) images (about 27% for SFM) decreased to 11% for FFDM.

Short communication: Practical aspects for the evaluation of skin doses in interventional cardiology using a new slow film

Mapping skin doses in complex fluoroscopy interventions is useful to determine the probability of a possible injury, to detect areas of overlapping irradiation fields and to obtain a permanent register of the most exposed patient skin areas. To fulfil this task, large films with slow X-ray response can be used. Recently, Kodak has introduced a new radiotherapy verification film, named EDR2 (Extended Dose Range). The aim of this paper is to analyse the possibilities of using this new film for estimating skin dose distributions in interventions with potentially higher doses, such as complex percutaneous transluminal coronary angioplasty (PTCA), intravascular brachytherapy procedures (IVB) or cardiac ablations. The EDR2 film by Kodak is an improved option to be used in interventional cardiology to obtain maps of patient skin doses and to estimate maximum skin doses up to 1400 mGy. Film kVp dependence is negligible and the processor conditions can be standardized to obtain skin dose estimations. The linear range for accurate dose measurements is from 50 mGy to 500 mGy.

Skin radiation injuries in patients following repeated coronary angioplasty procedures

This study investigates the incidence of skin injuries and retrospectively estimates skin doses in a sample of patients who had multiple coronary angiographies and who underwent more than four percutaneous transluminal coronary angioplasties (PTCAs), performed primarily by the same team of cardiologists in a university hospital. A database of 7824 PTCAs performed during the last 14 years was analysed. Patients were selected and reviewed by a cardiologist and two radiotherapists with experience in radiation-induced skin injuries. A retrospective analysis of skin doses was performed using data from the patients' files and from the quality assurance (QA) programme of the hospital, which includes periodic patient dose measurements. 14 patients were included in the study. Each patient had undergone between 4 and 14 coronary angiographies and between 5 and 10 PTCAs, performed over a period of 2-10 years. The estimated mean dose-area product per procedure was 46 Gy cm(2) for coronary angiography and 82 Gy cm(2) for PTCA. Mean values of maximum skin dose per procedure were 217 mGy for the diagnostic studies and 391 mGy for the PTCAs. Only a slight radiation skin injury was clinically demonstrated in one patient with a history of 10 coronary angiographies and 10 PTCAs (estimated maximum skin dose 9.5 Gy). Another patient who underwent 14 coronary angiographies and 10 PTCAs (estimated maximum skin dose 7.3 Gy) showed a slight telangiectasia and discrete pigmentation. Another patient with a cutaneous lupus erythematosus showed pigmentation in the area of the radiation field following seven coronary angiographies and six PTCAs (estimated maximum skin dose 5.6 Gy), as expected bearing in mind that skin tolerance to high doses may be altered for patients with this pathology. Each of the remaining 11 patients with no skin injuries had undergone between 5 and 7 PTCAs and between 5 and 14 additional angiographies. None of the 14 patients reported acute skin injuries and no necrosis or radiodermatitis was observed.

Skin dose and dose-area product values for interventional cardiology procedures

Coronary angiography and percutaneous transluminal coronary angioplasty procedures performed in four different facilities were monitored in the present study by measuring maximum skin dose, dose-area product and other operational parameters. Radiographic slow film, thermoluminescent dosemeters and transmission ion chambers were used to measure dose related quantities. Values of 107-711 mGy for maximum skin dose and 27.3-370.6 Gy cm2 for dose-area product were found, together with cumulative skin dose estimates of 110-3706 mGy. A discussion of the relationship of measured dose-area product and skin dose values is made using a field concentration factor defined as a way to interpret the findings. No general correlation was observed between dose-area product and maximum skin dose. Cumulative skin dose estimates throughout a procedure should be discarded as a realistic method for assessing deterministic risk in cardiology procedures. Slow film in addition to thermoluminescent dosemeters for measurement of maximum skin dose is a good alternative, especially for complex interventional procedures. For repeated procedures, combining film and dose-area product monitoring favours optimization of radiation protection for the patient.

The use of dynamic phantoms in interventional radiology

The authors have constructed a 2D motor-controlled test object phantom holder to simulate clinical situations in which patient movement could be a cause of image degradation. The PAtient MOvement SImulation Test Object (PAMOSITO) has been constructed with modular parts to use different mobile test objects and static structures. The system allows the programming of different cycles of movement along two axes. PAMOSITO has been used in X ray equipment dedicated to interventional radiology. Those systems usually allow for different values for frame rate, pulse width or weighted frame averaging methods. The influence of selecting different values of the parameters, patient movement and its relation to patient dose and image quality has been studied. Image blurring due to motion has been evaluated with Leeds test objects TO.10 and 18FG. Spatial resolution limits and the threshold contrast detail detectability performance have been studied.

Radiation exposure to medical staff in interventional and cardiac radiology

The aim of this work has been to determine typical occupational dose levels in interventional radiology and cardiology installations and to relate doses to patient and occupational dosimetry through the dose-area product. An experimental correlation between environmental dosimetric records and dose-area products in the centres studied was established. The study covered a sample of 83 procedures performed by 10 specialists in six laboratories. The radiologists and cardiologists monitored wore nine thermoluminescent chips next to eyes, forehead, neck, hands, left shoulder, left forearm and left arm during each single procedure. In addition, direct reading electronic devices for environmental dosimetry were placed in the C-arm of the X-ray system, to estimate roughly the occupational radiation risk level. Typical shoulder doses derived from electronic dosimetry range between 300 and 500 muSv per procedure, assuming no lead protective screens were used. Using these values and patient dose-area data from two laboratories, averaged ratios of 84 and 120 muSv per 1000 cGy cm2 are obtained for cardiology procedures. Finally, occupational dose reductions of approximately 20% when using highly filtered X-ray beams with automatic tube potential (kV) reduction (available in some facilities), and by a factor of about three when using ceiling mounted screens, have been found.

Patient dosimetry in interventional radiology using slow films

A method for the evaluation of patient doses in interventional radiology procedures is presented and discussed. The method requires the analysis of slow non-screen films such as those used in radiotherapy. Dose area product and patient skin dose can be estimated with fair accuracy depending on the interventional procedure type. The agreement between the slow film method and diamentor measurement is better than 5% after the application of appropriate corrections. The cost is reasonable (pounds 5 per film) making it a worthwhile option in patient dosimetry, especially when the X-ray equipment does not include any fixed dose-area measuring device. Additional valuable information which may be applied to optimization of procedures (e.g. irradiated areas, number and types of projections check of appropriate use of beam limiting devices) is achieved by examining the different irradiation fields on the film.