Straightforward Fabrication of Double Roughness Structures on a Microcrystalline Film of a Diarylethene Derivative

Double roughness structure mimicking the surface of a lotus leaf was prepared using a newly synthesized diarylethene having a six-membered perfluorocyclohexene ring. The cubic-shaped crystals of the open-ring isomer, with sizes of approximately 7 μm, appeared immediately following solution casting. Upon UV irradiation, each cubic crystal was covered with needle-shaped crystals of the closed-ring isomer to form double roughness structures within 1 h. This structure could bear the continuous impact of water droplets.

Phototunable Cell Killing by Photochromic Diarylethene of Thiazoyl and Thienyl Derivatives

We report a unique phototunable cell killing technique using diarylethene molecules as photo-isomerizing-molecular switches. These molecules were delivered to DNA in the cell nucleus due to closed-form generated by UV light, and then blue light triggered cell killing. A UV light irradiation switches the open form, having no DNA intercalation activity, to the closed form to induce intercalation in DNA. This isomer, thus prepared ready for the action, exerts photocytotoxicity upon the subsequent blue light irradiation. Molecular biological analysis clarifies that photocytotoxicity is due to DNA double-strand breaks. Since cell death is observed only when irradiated with light where both the open- and closed-ring isomers have absorption, the possible mechanism of cell death is assumed to be due to the repeated photocyclization and photocycloreversion reactions of the diarylethene molecules, which induce irreparable damage to DNA. This unique photo-controllable action in a cell system can provide the basis of a novel scheme of phototherapy.

All-Visible (>500 nm)-Light-Induced Diarylethene Photochromism Based on Multiplicity Conversion via Intramolecular Energy Transfer

Photoswitching molecules that reversibly switch upon visible-light irradiation are some of the most attractive targets for biological and imaging applications. In this study, we found a diarylethene (DAE) derivative having a covalently attached perylenebisimide (PBI) unit (DAE-PBI dyad) underwent an unexpected cyclization reaction upon irradiation with green (500-550 nm) light, where the DAE unit has no absorbance. The photoreactivity was enhanced in solvents containing heavy atoms and in the presence of oxygen. As inferred from the solvent dependence and the calculated excited-state energies of DAE and PBI units, it was suggested that the probable mechanism for this unique visible-light-induced cyclization reaction is multiplicity conversion based on intramolecular energy transfer from the excited singlet state of the PBI unit to the triplet state of DAE units (i.e., DAE-¹[PBI]* → ³[DAE]*-PBI). Such a unique photoreaction mechanism with the assistance of oxygen will pave the way for new molecular design for the development of visible-light switching molecules.

Photoinduced cytotoxicity of photochromic symmetric diarylethene derivatives: the relation of structure and cytotoxicity

Photopharmacology has been attracting attention for the development of drugs with fewer side effects and lower toxicity by introducing a photoswitch structure in the drug and controlling its spatiotemporal effects by light irradiation. Ideally, to achieve precise spatiotemporal control, it is desirable to use photoresponsive molecules that act as anticancer agents based on molecular switch mechanisms at the molecular level. However, very few reports on photoinduced cytotoxicity have used photoresponsive molecules with simple structures. Here, we investigate the photoinduced cytotoxicity of twelve diarylethene derivatives having thiazole or pyridine rings in their molecules and evaluate them in terms of molecular structure and size. Our results provide insight into molecular design principles for diarylethene with a simple structure toward achieving precise control based on molecular-level switch mechanisms.

Molecular crystalline capsules that release their contents by light

Here, we present single crystalline capsules of a photoresponsive molecule produced by simple recrystallization from organic solutions without direct human processing. During the crystal growth process, a movie was taken of the capsule taking in the organic solution. The capsules responded rapidly (<1 s) to the UV light stimuli and released the captured solution or solute. In principle, they can take in any substance dissolved in organic solvents, and their size can be controlled. Moreover, the capsule can be broken by multi-photon excitation using a near-infrared laser within the biological window. Furthermore, because the molecular packing in the crystal is unidirectional, the response can be controlled by the polarization of the light. This study shows the new potential of photoresponsive molecules.

Determining Factor of the Quantum Yield of the Cyclization Reaction via Triplet States for Dye-Attached Diarylethene

The difference in the quantum yields of the cyclization reaction of two isomers of dye-attached diarylethene via the triplet state observed in the experiment [J. Phys. Chem. C 2009, 113, 11623-11627] was theoretically examined by quantum chemical calculations. By evaluating the spin-orbit couplings, we found that the ratio of the rate constants from the S₁ state to the T₂ state between two isomers agreed with that of the experimental quantum yield of the cyclization reaction. The difference in the spin-orbit couplings is due to the difference in the delocalization of the orbitals between diarylethene and dye. We further found that after the intersystem crossing took place the cyclization reaction via the triplet state occurred in the experiment due to the low energy barrier (∼10 kcal/mol) for the reaction.

Spontaneous Combustion of 2-Bromo-3-Methoxythiophene: A Study on Reaction Pathways and Energetics by Quantum Chemical Calculations

Reaction pathways and energetics for the dimerization and trimerization reactions of 2-bromo-3-methoxythiophene (2Br-3Met) molecules are investigated using hybrid density functional theory (DFT) calculations to obtain insight into the oligomerization reaction observed in the spontaneous combustion of pure liquid 2Br-3Met. The calculations show that the carbon-bromine bond in a 2Br-3Met molecule elongates easily, and the trans addition of this C-Br bond to a double bond in the neighboring 2Br-3Met molecule occurs easily at room temperature, reflecting the evaluated activation energy of ΔH_a = 12.46 kcal/mol (enthalpy) or ΔG_a = 35.68 kcal/mol (Gibbs free energy, 298.150 K and 1 atm). The formation process of trimers is calculated in a similar way. A model for the explanation of spontaneous combustion is proposed; large oligomers of the 2Br-3Met molecule are produced spontaneously following the initial formation of dimers or trimers. UV-vis spectra and vibration spectra are obtained for related molecular species, which show reasonable agreement with the experimental results.

Photoinduced topographical surface changes and photoresponse of the crystals of 7-methoxycoumarin

Photoinduced topographical changes, bending, and photosalient effect due to the dimerization reaction were observed on a single crystal of 7-methoxycoumarin, upon deep UV (254 nm) light irradiation.

Photoinduced swing of a diarylethene thin broad sword shaped crystal: a study on the detailed mechanism

We report a swinging motion of photochromic thin broad sword shaped crystals upon continuous irradiation with UV light. By contrast in thick crystals, photosalient phenomena were observed. The bending and swinging mechanisms are in fact due to molecular size changes as well as phase transitions. The first slight bending away from the light source is due to photocyclization-induced surface expansion, and the second dramatic bending toward UV incidence is due to single-crystal-to-single-crystal (SCSC) phase transition from the original phase I to phase IIUV. Upon visible light irradiation, the crystal returned to phase I. A similar SCSC phase transition with a similar volume decrease occurred by lowering the temperature (phase IIItemp). For both photoinduced and thermal SCSC phase transitions, the symmetry of the unit cell is lowered; in phase IIUV the twisting angle of disordered phenyl groups is different between two adjacent molecules, while in phase IIItemp, the population of the phenyl rotamer is different between adjacent molecules. In the case of phase IIUV, we found thickness dependent photosalient phenomena. The thin broad sword shaped crystals with a 3 μm thickness showed no photosalient phenomena, whereas photoinduced SCSC phase transition occurred. In contrast, large crystals of several tens of μm thickness showed photosalient phenomena on the irradiated surface where SCSC phase transition occurred. The results indicated that the accumulated strain, between isomerized and non-isomerized layers, gave rise to the photosalient phenomenon.

Cyclization from Higher Excited States of Diarylethenes Having a Substituted Azulene Ring

The cyclization reaction of diarylethenes having an azulene ring occurs only via higher excited states. Novel diarylethenes having an azulene ring with a strong donor or acceptor were synthesized and examined in these reactions. A derivative having an electron-donating 1,3-benzodithiol-2-ylidenemethyl group at the 1-position of the azulene ring showed photochromism, whereas neither a derivative having a π-conjugated electron-donating group at the 3-position of the azulene ring nor derivatives having a π-conjugated electron-withdrawing group at the 1- or 3-position of the azulene ring showed any photochromism. The photoreactivities of these compounds were explained by calculating forces and bond orders on the excited states using density functional theory (DFT) and time-dependent (TD)-DFT.

Crystal Growth Technique for Formation of Double Roughness Structures Mimicking Lotus Leaf

Bio-inspired functional materials have received much attention for their potential to provide sustainable and advanced materials. The lotus effect has proven to be one of the most remarkable biomimetic effects since it was discovered by Barthlott. A superhydrophobic surface with the ability to bounce water droplets is the origin of the self-cleaning mechanism that keeps the surface clean by removing dust using water droplets moving with momentum. We have developed a crystal growth technique (CGT) of photochromic diarylethenes over the past decade, and from this, we fabricated a surface structure that closely resembles the natural lotus leaf's characteristic of controlling the Laplace pressure and clarified the importance of the double roughness structure of the surface. The bouncing ability is also discussed in terms of the characteristic size of the double roughness structure theoretically. Moreover, this work clarifies the exquisiteness of the double roughness structure of the leaf. We also show that the CGT is a versatile technique with the potential to fabricate desired structured surfaces.

Aggregation-induced emission effect on turn-off fluorescent switching of a photochromic diarylethene

Background: Diarylethenes are well-known photochromic compounds, which undergo cyclization and cycloreversion reactions between open- and closed-ring isomers. Recently, diarylethene derivatives with photoswitchable fluorescent properties were prepared. They are applicable for fluorescence imaging including bio-imaging. On the other hand, a new system called “excited state intramolecular proton transfer (ESIPT)” is reported. In the system, absorption and emission bands are largely separated due to the proton transfer, hence it showed strong fluorescence even in the crystalline state. We aimed to construct the photochromic system incorporating the ESIPT mechanism.

Results: A diarylethene incorporating a fluorescent moiety that exhibit ESIPT behavior was prepared. The ESIPT is one of the examples which express the mechanisms of aggregation-induced emission (AIE). This compound emits orange fluorescence with a large Stokes shift derived from ESIPT in aprotic solvents such as THF or hexane, while it exhibits only a photochromic reaction in protic solvents such as methanol. In addition, it shows turn-off type fluorescence switching in an aprotic solvent and in crystals. The fluorescence is quenched as the content of closed-ring isomers increases upon UV light irradiation.

Conclusions: A diarylethene containing an ESIPT functional group was prepared. It showed fluorescent turn-off behavior during photochromism in aprotic solvents as well as in crystalline state upon UV light irradiation. Furthermore, it showed AIE in THF/water mixtures with blue-shift of the emission.

Photosalient Effect of Diarylethene Crystals of Thiazoyl and Thienyl Derivatives

The photoresponse of diarylethene crystals is found to depend on the intensity of UV light, that is, photoinduced bending is switched to photosalient phenomena by increasing the light intensity. The change in the size of the crystal unit cell upon UV irradiation is larger for asymmetric diarylethenes with thiazole and thiophene rings than that for the corresponding symmetric diarylethenes. As a result, the crystals of an asymmetric diarylethene show much more drastic photosalient effects than those of the corresponding symmetric diarylethene crystals upon UV irradiation. It is also found that the crystals of diarylethene, which have not previously been reported to exhibit a photosalient effect, show photosalient phenomena upon irradiation with strong UV light. Furthermore, the dependence of photosalient phenomena on the size and shape of the crystals is reported.

Photochromic Crystalline Systems Mimicking Bio-Functions

Photoresponsive crystalline systems mimicking bio-functions are prepared using photochromic diarylethenes. Upon UV irradiation of the diarylethene crystal, the photogenerated closed-ring isomers self-aggregate to form needle-shaped crystals on the surface. The rough surface shows the superhydrophobic lotus effect. In addition, the rose-petal effects of wetting, the anti-reflective moth-eye effect, and a double-roughness structure mimicking the surface of a lotus leaf are observed by controlling the heating procedures, UV irradiation processes, and molecular structural modification. By changing the molecular structure, a superhydrophilic surface mimicking a snail shell can be generated. We also find the crystal of a diarylethene derivative that shows a photosalient effect. The effect is observed partly due to the hollow structure of the crystal. It is demonstrated that a photo-response similar to the response of impatiens plant to stimulation is observed by packing small beads in the hollow. These photoresponsive functions are unique, and they demonstrate a macroscopic response by means of microscopic molecular movement induced by light. In the future, such a molecular assembly system will be a promising candidate for fabricating photoresponsive architectures and soft robots.

Photosalient Phenomena that Mimic Impatiens Are Observed in Hollow Crystals of Diarylethene with a Perfluorocyclohexene Ring

A diarylethene with a perfluorocyclohexene ring formed hollow crystals by sublimation under normal pressure. Upon UV irradiation of the crystals, they showed remarkable photosalient phenomena and scattered into small pieces. The speed of the flying debris released from the crystal by UV irradiation exceeded several meters per second. To clearly show a photosalient effect resembling the scattering behavior of Impatiens on a smaller scale, small fluorescent beads (1-μm diameter) were inserted into the hollow crystal. Consequently, scattering of the beads was observed as UV irradiation caused deformation and bursting of the hollow structure. This phenomenon is unique to hollow crystals, and the ability to effectively induce remarkable photosalient phenomena is similar to the behavior of hollow-structured Impatiens in nature.

Photosalient Effect of a Diarylethene with a Perfluorocyclohexene Ring

Crystals of a diarylethene with a perfluorocyclohexene ring exhibit a remarkable photosalient effect upon UV light irradiation that is attributed to the structural changes that occur when going from open- to closed-ring isomers in the crystalline state, together with the existence of two conformers with different photoconversions compared with those of a perfluorocyclopentene derivative. Our current results give a design principle for molecular structures so as to achieve the photosalient effect for photochromic crystals.

The synthesis of optically active N-C axially chiral tetrahydroquinoline and its response to an acid-accelerated molecular rotor

Optically active atropisomeric N-(2,5-di-tert-butylphenyl)-1,2,3,4-tetrahydroquinoline with an N-C chiral axis was prepared via a catalytic enantioselective reaction. The addition of methane sulfonic acid to this axially chiral quinoline dramatically lowered the barrier to rotation around the chiral axis.

Photoinduced cytotoxicity of a photochromic diarylethene via caspase cascade activation

The photo-generated closed-ring isomer of bis(5-methyl-2-phenylthiazoyl)perfluorocyclopentene shows cytotoxicity to Madin-Darby canine kidney (MDCK) cells through a caspase cascade and induces apoptosis of cells.

Photoinduced reversible formation of a superhydrophilic surface by crystal growth of diarylethene

The surface covered with lumpy crystals shows superhydrophilicity that can be reversibly controlled by alternating irradiation with UV and visible light.

A diarylethene as the SO2 gas generator upon UV irradiation

A closed-ring isomer of a diarylethene having a sulfone group works as the reagent for SO2 gas generation with thermal stability even at 70 °C, and it rapidly reverts to the open-ring isomer and generates the SO2 gas to induce cell death upon UV irradiation.

Theoretical Explanation of the Lotus Effect: Superhydrophobic Property Changes by Removal of Nanostructures from the Surface of a Lotus Leaf

Theoretical study is presented on the wetting behaviors of water droplets over a lotus leaf. Experimental results are interpreted to clarify the trade-offs among the potential energy change, the local pinning energy, and the adhesion energy. The theoretical parameters, calculated from the experimental results, are used to qualitatively explain the relations among surface fractal dimension, surface morphology, and dynamic wetting behaviors. The surface of a lotus leaf, which shows the superhydrophobic lotus effect, was dipped in ethanol to remove the plant waxes. As a result, the lotus effect is lost. The contact angle of a water drop decreased dramatically from 161° of the original surface to 122°. The water droplet was pinned on the surface. From the fractal analysis, the fractal region of the original surface was divided into two regions: a smaller-sized roughness region of 0.3-1.7 μm with D of 1.48 and a region of 1.7-19 μm with D of 1.36. By dipping the leaf in ethanol, the former fractal region, characterized by wax tubes, was lost, and only the latter large fractal region remained. The lotus effect is attributed to a surface structure that is covered with needle-shaped wax tubes, and the remaining surface allows invasion of the water droplet and enlarges the interaction with water.

Anisotropic elliptical dichroism and influence of imperfection of circular polarization upon anisotropic circular dichroism

In spite of the importance of anisotropic circular dichroism, in practice, it is difficult to get rid of the artifacts that arise from the imperfection of the circular polarization. Undesirable linear dichroism, interference of two orthogonal polarization states, and linear birefringence prevent us from making accurate measurements. We propose a theoretical method for evaluating the contributions of the first two, which are thought to be the main artifacts when specimens are not thick enough. Using the time-dependent perturbation theory and taking into account the direction of light propagation toward an orientationally fixed molecule, we formulated the transition probability of systems perturbed by arbitrarily polarized light and the absorption difference associated with two kinds of polarized light. We also formulated, as an extension of the dissymmetry factor of circular dichroism, a newly defined dissymmetry factor associated with two arbitrary polarization states. Furthermore, we considered a mixed-state of photon ensemble in which polarization states distribute at a certain width around a certain average. Although the purity of polarization and ellipticity does not correspond immediately, by considering the mixed state it is possible to treat them consistently. We used quantum statistical mechanics to describe the absorption difference for two kinds of photon ensembles and applied the consequent formula to examine the reported experimental results of single-molecule chiroptical responses under discussion in the recent past. The artifacts are theoretically suggested to be sensitive to the incident direction of elliptically polarized light and to the oriented systems, the ellipticity, and the orientation of ellipse. The mixed state has little, if any, effect when the polarization state distribution is narrow.

Theoretical explanation of the photoswitchable superhydrophobicity of diarylethene microcrystalline surfaces

Two types of superhydrophobic surfaces which show lotus and petal effects were induced on photochromic diarylethene microcrystalline surfaces by UV and visible light irradiation and temperature control. On the surfaces showing the lotus effect, a low-adhesion superhydrophobic property is attributed to the surface structure being covered with densely standing needle-shaped crystals of the closed-ring isomer. On surfaces showing the petal effect, a high-adhesion superhydrophobic surface consists of fine needle-shaped crystals with high density together with a few rod-shaped crystals, where an invasion phenomenon occurs between these rod-shaped crystals. Furthermore, the different superhydrophobic properties of the surfaces are theoretically explained using multipillar surface models.

Anisotropic dissymmetry factor, g: theoretical investigation on single molecule chiroptical spectroscopy

A formula for an anisotropic dissymmetry factor g evaluating the chiroptical response of orientationally fixed molecules is derived. Incorporating zeroth- and first-order multipole expansion terms, it is applied to bridged triarylamine helicene molecules to examine the experimental results of single-molecule chiroptical spectroscopy. The ground- and excited-state wave functions and a series of transition moments required for the evaluation of the anisotropic g value are calculated using time-dependent density functional theory (TDDFT). The probability histograms obtained for simulated g values, uniformly sampled in regard to the direction of light propagation toward the fixed molecule, show that even for a given diastereomer, the dissymmetry factors have positive and negative values and can deviate from their averages to a considerable extent when the angle between the electric dipole transition moment and the propagation vector of the incident light is near 0 or 180°.

A photo- and halochromic multicolor switching system consisting of diarylethene and malachite green moieties

A diarylethene with a malachite green moiety was synthesized, and it showed multicolor states by photochromic and halochromic reactions.

Photoinduced self-epitaxial crystal growth of a diarylethene derivative with antireflection moth-eye and superhydrophobic lotus effects

We identified the mechanism of the formation of needle-shaped microcrystals on which the contact angle of a water droplet exceeds 170° [Nishikawa, N. et al. Langmuir, 2012, 28, 17817-17824]. The standing needle-shaped crystal of the closed-ring isomer of a diarylethene 3c grew at a much lower temperature than the eutectic temperature by irradiation of UV light on the thin films of the open-ring isomer 3o, due to the epitaxial growth of the 013 plane of 3c over the 110 plane of the crystal lattice of 3o in the subphase. Therefore, the new crystal-growth mechanism triggered by the photoisomerization does not require special inorganic single-crystal substrates and may be called self-epitaxial crystal growth. The needle-shaped crystals appeared well-ordered and stood inclined at an angle of about 60° to the surface. Consequently, the photo-induced rough surface shows not only the superhydrophobic lotus effect, but also the antireflection moth-eye effect, and these effects were switchable by alternate irradiation with UV and visible light.