Disinfection of Bacteria in Aerosols by Applying High Voltage to Stranded Wire Electrodes

The inactivation of airborne pathogenic microorganisms is crucial to attenuate the dissemination of infectious diseases induced by airborne pathogens. Conventional air disinfection methodologies, such as ultraviolet (UV) irradiation and ozone treatment, have demonstrated limited efficacy. Consequently, we investigated the potential of employing pulsed voltages to effectively eradicate bacteria within aerosols. Our inquiry revealed that the bacterial disinfection rate increased proportionally with elevated applied voltage and frequency. For instance, when a pulsed voltage of 20 kV and a frequency of 500 Hz were applied, a substantial disinfection rate exceeding 6.0 logarithmic units was attained. Furthermore, with the utilization of the stranded wire anodes, the disinfection intensity could be augmented by up to 2.0 logarithmic units compared with the solid wire configuration. Through the utilization of a stranded wire electrode model, we scrutinized the electric field encompassing the electrode, revealing a non-uniform electric field with the stranded wire electrode. This observation indicated an amplified bacterial disinfection effect, aligning with our experimental outcomes. These findings significantly enhance our comprehension of efficacious approaches to electrically disinfecting airborne bacteria.

Vancomycin-Resistant Enterococcus faecium Sterilization and Conductivity Change by Impulse Voltage

Owing to the increased use of antibiotics, drug-resistant strains, including those that are resistant to the antibiotic vancomycin, have emerged, which has become a major problem. In Japan, sewage treatments consist of sterilization with chlorine; however, this may not be sufficient to inactivate these bacteria. In this study, impulse voltage was employed instead of chlorine to inactivate drug-resistant bacteria. The results showed that sterilization above 10⁵ CFU/mL is possible with longer application times of applied voltages above 4.5 kV. The effectiveness of impulse-voltage-mediated sterilization increased as the temperature of the bacterial suspension increased. The number of bacteria sterilized via impulse voltage was correlated with conductivity when the number of bacteria sterilized by impulse voltage exceeded 10⁵ CFU/mL. The sterilization rate achieved by the use of impulse voltage could be estimated immediately by measuring the electrical conductivity and without the need for using the culture method.

Metal-coated plastics recycling by pulsed electric discharge

Recycling of useful materials such as metals and plastics are evaluated important from the viewpoint of resource conservation and environmental protection. In this respect, the application of pulsed power technology to the recycling field has attracted considerable attention. We used a compact disc-read only memory (CD-ROM) as a separation processing target in this study. A magnetic pulse compression pulsed power generator (MPC-PPG) was designed and constructed to provide a positive pulse voltage. By applying an electric discharge, the protective layer containing the metal layer was separated from the plastic substrate in the atmospheric air. Here, to clarify the mechanism of the metal separation, shock waves and their induced fluid flow generation and propagation were observed by schlieren and shadowgraph visualization methods. Initially, the Mach number of the shock wave was 5.6, soon afterward the shock wave velocity decreased gradually. The fragments of the metal and the protective layers were removed from the plastic substrate with the shock wave propagation. The proposed method and process is applicable to the recycling of electronic wastes on an industrial scale for efficient recovery of valuable materials.

Enantioselective disposition of fexofenadine with the P-glycoprotein inhibitor verapamil

AIMS

The aim was to compare possible effects of verapamil, as a P-glycoprotein (P-gp) inhibitor, on the pharmacokinetics of each fexofenadine enantiomer, as a P-gp substrate.

METHODS

Thirteen healthy Japanese volunteers (10 male and three female) were enrolled. In a randomized, two-phase, crossover design, verapamil was dosed 80 mg three times daily (with total daily doses of 240 mg) for 6 days, and on day 6, a single 120-mg dose of fexofenadine was administered along with an 80-mg dose of verapamil. Subsequently, fexofenadine was administered alone after a 2-week wash-out period. The plasma concentrations of fexofenadine enantiomers were measured up to 24 h after dosing.

RESULTS

During the control phase, the mean AUC(0-infinity) of S(-)- and R(+)-fexofenadine was 700 ng h(-1) ml(-1)[95% confidence interval (CI) 577, 823] and 1202 ng h(-1) ml(-1) (95% CI 1007, 1396), respectively, with a significant difference (P < 0.001). Verapamil had a greater effect on the pharmacokinetic parameters of S(-)-fexofenadine compared with those of the R(+)-enantiomer, and increased AUC(0-infinity) of S(-)-fexofenadine and R(+)-fexofenadine by 3.5-fold (95% CI of differences 1.9, 5.1; P < 0.001) and by 2.2-fold (95% CI of differences 1.7, 3.0; P < 0.001), respectively. The R/S ratio for the AUC(0-infinity) was reduced from 1.76 to 1.32 (P < 0.001) by verapamil treatments.

CONCLUSION

This study indicates that P-gp plays a key role in the stereoselectivity of fexofenadine pharmacokinetics, since the pharmacokinetics of fexofenadine enantiomers were altered by the P-gp inhibitor verapamil, and this effect was greater for S-fexofenadine compared with R-fexofenadine.

A method of water-bloom prevention using underwater pulsed streamer discharge

Water-bloom (also named as cyanobacterial bloom) is becoming a very serious pollution problem all over the world. In this paper, a new method for the prevention of water blooms using underwater streamer discharges is reported. Blumlein pulse forming network (B-PFN) and magnetic pulse compression circuit (MPC) were employed to apply high voltage pulses to water with cyanobacterial cells. The experimental results confirmed that the cyanobacterial cells sank to the bottom of the water bodies after applying underwater streamer discharges. Transmission electron microscope (TEM) observations showed that the discharge collapsed the gas vesicles (GVs)-the intercellular structure of water-bloom forming cyanobaterial cells-and did not affect the other part of contents of the cells. Cynabacterial cells lost buoyancy and sank to the bottom of the water bodies. Because of lower temperature and without enough sunlight at the bottom of the water bodies, the cells can be prevented from proliferation too quickly.