Spin Crossover in a Catenane Supramolecular System

The compound [Fe(tvp)(2)(NCS)(2)] . CH(3)OH, where tvp is 1,2-di-(4-pyridyl)-ethylene, has been synthesized and characterized by x-ray single-crystal diffraction. It consists of two perpendicular, two-dimensional networks organized in parallel stacks of sheets made up of edge-shared [Fe(II)](4) rhombuses. The fully interlocked networks define large square channels in the [001] direction. Variable-temperature magnetic susceptibility measurements and Mössbauer studies reveal that this compound shows low-spin to high-spin crossover behavior in the temperature range from 100 to 250 kelvin. The combined structural and magnetic characterization of this kind of compound is fundamental for the interpretation of the mechanism leading to the spin crossover, which is important in the development of electronic devices such as molecular switches.

Selective photoswitching of the binuclear spin crossover compound {[Fe(bt)(NCS)2]2(bpm)} into two distinct macroscopic phases

The low-spin (LS-LS, S = 0) diamagnetic form of the binuclear spin crossover complex {[Fe(bt)(NCS)(2)](2)(bpm)} was selectively photoconverted into two distinct macroscopic phases at different excitation wavelengths (1342 or 647.1 nm). These long-lived metastable phases have been identified, respectively, as the symmetry-broken paramagnetic form (HS-LS, S = 2) and the antiferromagnetically coupled (HS-HS, S = 0) high-spin form of the compound. The selectivity may be explained by the strong coupling of the primary excited states to the paramagnetic state.

Enhanced luminescence stability with a Tb–spin crossover nanocomposite for spin state monitoring

Tb–spin crossover nanocomposite possessing high photoluminescence stability is shown to be very efficient for spin state monitoring via a reabsorption mechanism.

Nanocrystals of Fe(phen)2(NCS)2 and the size-dependent spin-crossover characteristics

We describe the preparation of nano- and microcrystals of the Fe(phen)₂(NCS)₂ spin-crossover prototypical compound based on the solvent-assisted technique applied to an ionic and soluble precursor and analyze the size-dependent characteristics of the thermal spin-crossover.

Elastic coupling between spin-crossover particles and cellulose fibers

Composite materials made of cellulose fibers and spin crossover micro-particles investigated by dynamic mechanical analysis revealed an abrupt and reversible stiffening upon spin transition from the low spin to the high spin state.

An {Fe60} tetrahedral cage: building nanoscopic molecular assemblies through cyanometallate and alkoxo linkers

A nanoscopic {Fe₆₀} coordination cage (approximately 3 nm) was prepared by the self assembly of a partially blocked tricyanidoferrate(iii) complex and tris(alkoxo)-based iron(iii) coordination motifs.

Nanoscale coordination polymers obtained in ultrasmall liquid droplets on solid surfaces and its comparison to different synthetic volume scales

Confined synthesis and comparative study of a coordination polymer at different volume scales, from the macroscopic to the femtolitre scale.

Semiconductor surface plasmon sources

Surface-plasmon polaritons (SPPs) are propagating electromagnetic modes bound at a metal-dielectric interface. We report on electrical generation of SPPs by reproducing the analogue in the near field of the slit-doublet experiment, in a device which includes all the building blocks required for a fully integrated plasmonic active source: an electrical generator of SPPs, a coupler, and a passive metallic waveguide. SPPs are generated upon injection of electrical current, and they are then launched at the edges of a passive metallic strip. The interference fringes arising from the plasmonic standing wave on the surface of the metallic strip are unambiguously detected with apertureless near-field scanning optical microscopy.

In situ generation of surface plasmon polaritons using a near-infrared laser diode

We demonstrate a semiconductor laser-based approach which enables plasmonic active devices in the telecom wavelength range. We show that optimized laser structures based on tensile-strained InGaAlAs quantum wells-coupled to integrated metallic patternings-enable surface plasmon generation in an electrically driven compact device. Experimental evidence of surface plasmon generation is obtained with the slit-doublet experiment in the near-field, using near-field scanning optical microscopy measurements.

Electrical modulation of the complex refractive index in mid-infrared quantum cascade lasers

We have demonstrated an integrated three terminal device for the modulation of the complex refractive index of a distributed feedback quantum cascade laser (QCL). The device comprises an active region to produce optical gain vertically stacked with a control region made of asymmetric coupled quantum wells (ACQW). The optical mode, centered on the gain region, has a small overlap also with the control region. Owing to the three terminals an electrical bias can be applied independently on both regions: on the laser for producing optical gain and on the ACQW for tuning the energy of the intersubband transition. This allows the control of the optical losses at the laser frequency as the absorption peak associated to the intersubband transition can be electrically brought in and out the laser transition. By using this function a laser modulation depth of about 400 mW can be achieved by injecting less than 1 mW in the control region. This is four orders of magnitude less than the electrical power needed using direct current modulation and set the basis for the realisation of electrical to optical transducers.

Realization of Harmonic Oscillator Arrays with Graded Semiconductor Quantum Wells

The harmonic oscillator is a foundational concept in both theoretical and experimental quantum mechanics. Here, we demonstrate harmonic oscillators in a semiconductor platform by faithfully implementing continuously graded alloy semiconductor quantum wells. Unlike current technology, this technique avoids interfaces that can hamper the system and allows for the production of multiwell stacks several micrometers thick. The experimentally measured system oscillations are at 3 THz for two structures containing 18 and 54 parabolic quantum wells. Absorption at room temperature is achieved: this is as expected from a parabolic potential and is unlike square quantum wells that require cryogenic operation. Linewidths below 11% of the central frequency are obtained up to 150 K, with a 5.6% linewidth obtained at 10 K. Furthermore, we show that the system correctly displays an absence of nonlinearity despite electron-electron interactions-analogous to the Kohn theorem. These high-quality structures already open up several new experimental vistas.