Local electronic transport across probe/ionic conductor interface in scanning probe microscopy

Charge carrier transport through the probe-sample junction can have substantial consequences for outcomes of electrical and electromechanical atomic-force-microscopy (AFM) measurements. For understanding physical processes under the probe, we carried out conductive-AFM (C-AFM) measurements of local current-voltage (I-V) curves as well as their derivatives on samples of a mixed ionic-electronic conductor Li_1-xMn₂O₄ and developed an analytical framework for the data analysis. The implemented approach discriminates between contributions the highly resistive sample surface layer and the bulk with the account of ion redistribution in the field of the probe. It was found that, with increasing probe voltage, the conductance mechanism in the surface layer transforms from Pool-Frenkel to space-charge-limited current. The surface layer significantly alters the ion dynamics in the sample bulk under the probe, which leads, in particular, to a decrease of the effective electromechanical AFM signal associated with the ionic motion in the sample. The framework can be applied for the analysis of electronic transport mechanisms across the probe/sample interface as well as to uncover the role of the charge transport in the electric field distribution, mechanical, and other responses in AFM measurements of a broad spectrum of conducting materials.

Quantitative characterization of the ionic mobility and concentration in Li-battery cathodes via low frequency electrochemical strain microscopy

Electrochemical strain microscopy (ESM) can provide useful information on the ionic processes in materials at the local scale. This is especially important for ever growing applications of Li-batteries whose performance is limited by the intrinsic and extrinsic degradation. However, the ESM method used so far has been only qualitative due to multiple contributions to the apparent ESM signal. In this work, we provide a viable approach for the local probing of ionic concentration and diffusion coefficients based on the frequency dependence of the ESM signal. A theoretical basis considering the dynamic behavior of ion migration and relaxation and change of ion concentration profiles under the action of the electric field of the ESM tip is developed. We argue that several parasitic contributions to the ESM signal discussed in the literature can be thus eliminated. The analysis of ESM images using the proposed approach allows a quantitative mapping of the ionic diffusion coefficients and concentration in ionic conductors. The results are validated on Li-battery cathodes (LiMn₂O₄) extracted from commercial Li-batteries and can provide novel possibilities for their development and further insight into the mechanisms of their degradation.

Structural, magnetic, magnetocaloric and specific heat investigations on Mn doped PrCrO3 orthochromites

We have synthesized PrCr_0.85Mn_0.15O₃ (PCMO) chromite and investigated the influence of manganese (Mn) doping at Cr-sites on the structural, magnetic, magnetocaloric and thermal properties of PrCrO₃ compound. No structural transition was observed with Mn substitution and the doped compound crystallized into distorted orthorhombic structure with Pnma space group which was confirmed by Rietveld refinement of x-ray powder diffraction patterns. Neel temperature, noticed at 168 K from the temperature variation of magnetization, smaller than that reported for PrCrO₃, indicated the influence of Mn³⁺ substitution in decreasing the antiferromagnetic ordering. Magnetization was almost eight times higher than that reported for undoped sample. Magnetocaloric effect measured via the magnetic entropy change and relative cooling power demonstrated significant values in the temperature range 10-20 K. The values of magnetic entropy change are much superior to that reported for other polycrystalline orthochromites and even at smaller applied field strength. The material exhibited second order magnetic phase transition. The Debye temperature and the density of states at Fermi level were also calculated. The overall results make PrCr_0.85Mn_0.15O₃ chromite a potential candidate to replace the existing materials for low temperature magnetic refrigeration.

Magnetic and structural phase transitions in La0.5Sr0.5CoO(3-δ) (0 ≤ δ < 0.3) cobaltites

The evolution of the crystal structure and the magnetic properties was investigated in the La0.5Sr0.5CoO(3-δ) (0 < δ < 0.3) system as a function of the oxygen deficit δ. Compounds with a low oxygen deficit (δ < 0.1) are shown to be predominantly ferromagnetic, while further increase (δ > 0.1) gradually changes the magnetic structure from ferromagnetic to G-type antiferromagnetic and causes a structural transition from rhombohedral to cubic symmetry. Resistivity and magnetoresistance at low temperature increase with increasing of oxygen vacancies. It is argued that oxygen reduction facilitates stabilization of the high spin state of Co(3+) ions. Antiferromagnetic interactions between cobalt ions in the high spin state are found to dominate in compounds with the oxygen deficit δ > 0.18.

Computational and experimental studies of size and shape related physical properties of hydroxyapatite nanoparticles

In this work, the properties of hydroxyapatite (HAP) nanoparticles (NPs) have been studied both theoretically and experimentally focusing on computational analysis. HAP is widely used to fabricate implants, for drug delivery, etc. The physical properties of the nanosized HAP particles play an important role in the interaction with cells in the human body and are of great interest. Computer simulation was employed to understand the properties of HAP clusters (Ca(5)(PO(4))(3)OH) including formation energies, dipole moments and polarization (surface charges) by molecular mechanics (MM + , OPLS) and mostly by quantum semi-empirical Hartree-Fock (PM3) methods. The size of the simulated cluster is found to affect its dipole moment, polarization, and, finally, the electron work function- ϕ. These parameters depend on the concentration of hydrogen atoms H (or protons) at the surface. Values of ϕ were experimentally estimated via photoelectron emission measurements. The magnitude of ϕ was demonstrated to have a positive correlation on sizes. The NPs demonstrated a capability to be gathered within conglomerates. This property is confirmed by the calculated data for various sizes. Their sizes have a positive correlation on ϕ by the native particles. The main results show that the distributions of dipole moments have very different space orientations (along the OX, OY and OZ axes, the OZ axis is oriented along the OH column) and change with the addition of hydrogen atoms, which saturate the broken hydrogen bonds. This electrical property of NP leads to different behaviors and motions with consequent aggregation: (1) for the case of NPs having dipole moment oriented preferably perpendicular to the OZ axis (with more hydrogen bonds saturated by added H)-the HAP NP aggregates with hexagonal orientation and forms a wider and more spherical shape (sphere-like or bundle-like); (2) for the case of NPs having dipole moment oriented along the OZ axis (as is the case in the absence of added protons or non-saturated hydrogen bonds)-the NPs firstly rotated and oriented along this axis to form the most elongated cylindrical shape (rod-like).

Processing of Novel Electroceramic Components by SFF Techniques

Novel piezoelectric ceramic and ceramic/polymer composite structures were fabricated by solid freeform fabrication (SFF) for sensor and actuator applications. SFF techniques including fused deposition of ceramics (FDC) and Sanders prototyping (SP) were utilized to fabricate a variety of complex structures directly from a computer aided design (CAD) file. Novel composite structures including volume fraction gradients (VFG) and staggered rods, as well as actuator designs such as tubes, spirals and telescopes were made using the flexibility provided by the above processes. VFG composites were made by SP technique with the ceramic content decreasing from the center towards the edges. This resulted in a reduction of side lobe intensity in the acoustic beam pattern. The FDC technique was used to manufacture high authority actuators utilizing novel designs for the amplification of strain under applied electric field. The design, fabrication and electromechanical properties of these composite and actuator structures are discussed in this paper.

Domain Wall Contributions to the Piezoelectric Properties of Ferroelectric Ceramics and Thin Films, and Their Significance in Sensor and Actuator Applications

The piezoelectric and dielectric properties of ferroelectric thin films and ceramics were investigated in detail as a function of the frequency and amplitude of the driving field. A description, which is based on the theories of domain wall pinning by randomly distributed imperfections in magnetic materials, is used to interpret the electromechanical behaviour of several ferroelectric bulk ceramic and thin film compositions. With this approach, it is possible to make quantitative estimates of the domain wall contributions to the electromechanical properties of ferroelectric sensors and actuators.

Frequency-Dependent Electromechanical Response in Ferroelectric Materials Measured via Piezoresponse Force Microscopy

Local piezoelectric signal is measured via Piezoresponse Force Microscopy (PFM) in PbZr0.3Ti0.7O3 films and PbZr1/3Nb2/3O3-0.045PbTiO3 single crystals. It is observed that the amplitude of piezoelectric response is almost independent on frequency for vertical (out of plane) signal and strongly decreases with increasing frequency in the range 10–100 kHz for lateral (in-plane) response. Moreover, the in-plane piezoelectric contrast is reversed when the measurements are done at high enough frequency (phase shift exceeds 90°). As a result, the inplane polarization direction can be misinterpreted if the driving frequency exceeds certain level. For the explanation of observed effect a simple model is proposed that takes into account a possible slip between the conductive PFM tip and moving piezoelectric surface. The implications of the observed frequency-dependent contrast for the domain imaging in ferroelectric materials are discussed.

Local electromechanical properties of ferroelectric materials for piezoelectric applications

Local electromechanical characterization is becoming prerequisite for the development of ferroelectric-based piezoelectric devices including multilayer actuators, micromotors, piezoelectric filters and, especially, microelectromechanical systems (MEMS), which combine piezoelectric elements and control electronics on the same chip. In this work, we present the results of local electromechanical characterization of several important ferroelectric materials including Pb(Zr, Ti)O3 (PZT) and (Pb, La)(Zr, Ti)O3 (PLZT) in both thin film and ceramic form. Local piezoelectric hysteresis measurements are performed by the piezoelectric force microscopy (PFM) that detects small electric field-induced deformation on the nanoscale e. g., within the single grain of a polycrystalline material. A number of novel phenomena is observed with increasing dc bias voltage including the jump of ferroelectric domain wall to the grain boundary, the “fingerlike” instability of domain wall, and the local phase transition into ferroelectric phase.

Development of Novel Multiferroic Composites Based on BaTiO3 and Hexagonal Ferrites

A new multiferroic composite ceramics with the general formula (x)Ba(Sr)Fe12O19-(1-x)BaTiO3 (x=0.1, 0.5) was synthesized via a simple solid-state reaction technique. Crystal structure analysis performed for both materials revealed the presence of two crystalline phases pertinent to the initial composite components. X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to testify the crystallinity, microstructure, and local magnetoelectric interactions between ferroelectric and ferromagnetic grains. Magnetic measurements revealed that the saturation magnetization is proportional to the volume fraction of ferrite phase. Dielectric studies demonstrated strong frequency relaxation due to space charge polarization and high conductivity loss making macroscopic magnetoelectric measurements difficult. Novel nanoscale magnetoelectric effect observed by AFM is discussed.

Thermodynamic theory of strain-mediated direct magnetoelectric effect in multiferroic film-substrate hybrids

A nonlinear thermodynamic theory is developed for the strain-mediated direct magnetoelectric (ME) effect displayed by ferroelectric-ferromagnetic nanostructures. This effect results from transmission of magnetic-field-induced deformations of a thick ferromagnetic substrate to a thin ferroelectric overlayer, where the polarization changes due to lattice strains. The strain-dependent polarization and permittivity of an epitaxial nanolayer (few tens of nm thick) are calculated using the thermodynamic theory of single-domain ferroelectric films. The substrate magnetostrictive deformations are described phenomenologically, taking into account their nonlinear variation with magnetic field. The calculations show that ME polarization and voltage coefficients strongly depend on the initial strain state of the film. For BaTiO(3) and PbTiO(3) films deposited on Co(0.8)Zn(0.2)Fe(2)O(4), the out-of-plane polarization and related ME coefficients are calculated numerically as a function of magnetic field parallel to the interface. For films stabilized in the monoclinic phase, this transverse ME response depends on the orientation of magnetic field relative to their in-plane crystallographic axes. The longitudinal ME coefficient is also evaluated and, for a substrate geometry minimizing the demagnetizing field, predicted to be comparable to the transverse one. For BaTiO(3) and PbTiO(3) films deposited on Terfenol-D, the calculations yield high ME polarization coefficients approximately 10(-7) s m(-1) and giant ME voltage coefficients approximately 50 V cm(-1) Oe(-1).

Local piezoelectric properties of ZnO thin films prepared by RF-plasma-assisted pulsed-laser deposition method

Zinc oxide (ZnO) thin films were grown on uncoated and zinc-coated Corning glass substrates by pulsed-laser deposition (PLD). X-ray diffraction measurements revealed that the as-deposited films are polycrystalline having preferential orientation along the [0002] and [[Formula: see text]] directions. Transmittance spectroscopy verified that the as-deposited films are transparent with a direct bandgap of about 3.28 eV at room temperature. Piezoresponse imaging and local hysteresis loop acquisition were performed to characterize the piezoelectric and possible ferroelectric properties of the films. The out-of-plane (effective longitudinal, d(parellel)) and in-plane (effective shear, d(perpendicular)) coefficients were estimated from the local piezoresponse based on the comparison with LiNbO(3) single crystals. Measurements of all three components of piezoresponse (one longitudinal and two shear signals) allowed constructing piezoelectric maps for polycrystalline ZnO and to relate the variation of piezoelectric properties to the crystallographic and grain structure of the films. A shifted piezoresponse hysteresis loop under high voltages hints at the possible pseudoferroelectricity, as discussed recently by Tagantsev (2008 Appl. Phys. Lett. 93 202905).

Terahertz emission from tubular pB(Zr,Ti)O3 nanostructures

We report intense terahertz emission from lead zirconate titanate (PZT) tubular nanostructures, which have a wall thickness around 40 nm and protrude on n-type Si substrates. Such emission is totally absent in flat PZT films or bulk; hence the effect is attributed to the nanoscale geometry of the tubes. The terahertz radiation is emitted within 0.2 ps, and the spectrum exhibits a broad peak from 2 to 8 THz. This is a gap in the frequency spectrum of conventional semiconductor terahertz devices, such as ZnTe, and an order of magnitude higher frequency peak than that in the well-studied p-InAs, due to the abnormally large carrier concentration gradient in the nanostructured PZT. The inferred mechanism is optical rectification within a surface accumulation layer, rather than the Dember effect. The terahertz emission is optically pumped, but since the tubes exhibit ferroelectric switching, electrically driven emission may also be possible. EPR reveals 02 molecules adsorbed onto the nanotubes, which may play some role in the emission.

Dynamics of ferroelectric nanodomains in BaTiO(3) epitaxial thin films via piezoresponse force microscopy

Ferroelectric nanodomains were created in BaTiO(3) thin films by applying a voltage to a sharp conducting tip of a scanning force microscope (SFM). The films were epitaxially grown on SrRuO(3)-covered (001)-oriented SrTiO(3) substrates by a high-pressure sputtering. They appeared to be single-crystalline with the (001) crystallographic orientation relative to the substrate. Using the piezoresponse mode of the SFM to detect the out-of-plane film polarization, the domain sizes were measured as a function of the applied writing voltage and the pulse time. It was found that the time dependence of the domain diameter in a 60 nm thick BaTiO(3) film deviates significantly from the logarithmic law observed earlier in Pb(Zr(0.2)Ti(0.8))O(3) (PZT) films. At a given writing time, the domain size increases nonlinearly with increasing applied voltage, in contrast to the linear behavior reported earlier for PZT films and LiNbO(3) single crystals. The dynamics of domain growth is analyzed theoretically taking into account the strong inhomogeneity of the external electric field in the film and the influence of the bottom electrode. It is shown that the observed writing time and voltage dependences of the domain size can be explained by the domain-wall creep in the presence of random-bond disorder.