Extended cavity quantum cascade laser with cavity resonator integrated grating filter

We report on an extended cavity quantum cascade laser based on a cavity resonator integrated grating filter (CRIGF) that acts as both cavity end-reflector and spectral selector. Stable, mode-hop free, single-mode emission around 2150 cm^-1 is obtained over large injection current ranges (more than 50 mA) with a typical threshold around 290 mA. A digital frequency tuning over more than 65 cm^-1 is obtained by changing the periodicity of the CRIGF ending the extended cavity.

Mid-infrared cavity resonator integrated grating filters

Cavity Resonator Grating Filters (CRIGFs) working in the Mid-Infrared are reported, with narrow-band resonant reflectivity peaks around 2200 cm^-1 (4.6 µm). They are fabricated in the GaAs/AlGaAs material system that can potentially cover the whole [1-12] µm spectral range. TE-polarized peak reflectivity is 30% with a 4 cm^-1 full width at half maximum.

2 × 1D crossed strongly modulated gratings for polarization independent tunable narrowband transmission filters

We design a narrowband polarization independent transmission guided mode resonance filter whose center wavelength is tunable with respect to the angle of incidence. The device is composed of two identical structures assembled back to back. Each half structure is a dielectric multilayer stack in which a grating is engraved. This so-called 2×1D crossed gratings component has already been demonstrated for reflection filtering [Opt. Lett.36, 1662 (2011)OPLEDP0146-959210.1364/OL.36.001662; Opt. Lett.39, 6038 (2014)OPLEDP0146-959210.1364/OL.39.006038]. The functioning in transmission requires the use of a high index material for the grating bumps. For the design, we resort to a clustering global optimization algorithm, used for the first time to our knowledge for grating structures. We demonstrated two filters with a quality factor of about 4000, tunable over more than 15 nm when the angle of incidence varies over a range of 4°, and with a transmittivity at resonance greater than 95% whatever the incident polarization.

Electromagnetic modeling of large subwavelength-patterned highly resonant structures

The rigorous modeling of large (hundreds of wavelengths) optical resonant components patterned at a subwavelength scale remains a major issue, especially when long range interactions cannot be neglected. In this Letter, we compare the performances of the discrete dipole approximation approach to that of the Fourier modal, the finite element and the finite difference time domain methods, for simulating the spectral behavior of a cavity resonator integrated grating filter (CRIGF). When the component is invariant along one axis (two-dimensional configuration), the four techniques yield similar results, despite the modeling difficulty of such a structure. We also demonstrate, for the first time to the best of our knowledge, the rigorous modeling of a three-dimensional CRIGF.

Design of metallic nanoparticle gratings for filtering properties in the visible spectrum

Plasmonic resonances in metallic nanoparticles are exploited to create efficient optical filtering functions. A finite element method is used to model metallic nanoparticle gratings. The accuracy of this method is shown by comparing numerical results with measurements on a two-dimensional grating of gold nanocylinders with an elliptic cross section. A parametric analysis is then performed in order to design efficient filters with polarization dependent properties together with high transparency over the visible range. The behavior of nanoparticle gratings is also modeled using the Maxwell-Garnett homogenization theory and analyzed by comparison with the diffraction of a single nanoparticle. The proposed structures are intended to be included in optical systems that could find innovative applications.

Transmission properties of slanted annular aperture arrays. Giant energy deviation over sub-wavelength distance

This paper is devoted to the study of the transmission properties of Slanted Annular Aperture Arrays made in perfectly conducting metal. More precisely, we consider the transmission based on the excitation of the cutoff-less guided mode, namely the TEM mode. We numerically and analytically demonstrate some intrinsic properties of the structure showing a transmission coefficient of at least 50% of an unpolarized incident beam independently of the illumination configuration (angle and plane of incidence). The central symmetry exhibited by the structure is analytically exploited to demonstrate the existence of a polarization state for which all the incident energy is transmitted through the sub-wavelength apertures when the eigenmode is excited, whatever are the illumination and the geometrical parameters. For this state of polarization, the laminar flow of the energy through the structure can exhibit giant deviation over very small distances. An example of energy flow deviation of 220° per wavelength is presented for illustration. The results presented in this paper could be considered as an important contribution to the understanding of the enhanced transmission phenomenon based on the excitation of guided modes.

Waveguide mode in the box with an extraordinary flat dispersion curve

The extraordinary flattening of the dispersion curve of the so-called cavity resonator integrated guided-mode resonance filters (CRIGFs) is analyzed and explained as due to the intramode coupling imposed by the external Bragg resonators. CRIGFs are composed of a grating coupler (guided-mode resonance filter, GMRF) put between two distributed Bragg reflectors (DBRs). They form a cavity box in which the excited guided mode is confined. This confinement provides resonances with small spectral width (smaller than 1 nm for optical wavelengths) and extraordinary wide angular acceptance (several degrees). At a first glance, one may think that similar performances could be obtained while putting the GMRF and the DBR one above the other, forming a so-called "doubly periodic" grating, as in this configuration also the DBR confines the mode. Yet, the angular acceptance of CRIGFs is an order of magnitude greater than in classical gratings, even with complex pattern. The aim of the present paper is to identify the phenomenon responsible for the extraordinary large angular acceptance of CRIGFs. We numerically calculate, for the first time to the best of our knowledge, the dispersion curve of the mode excited in the CRIGF. The dispersion curve shows a flat part, where the resonance wavelength is quasi-independent of the angle of incidence, and the flattening grows with the width of the Bragg reflector. We develop an approximate coupled four-wave model, which predicts the extraordinary flattening as a consequence of an additional coupling of the waveguide modes of the GMRF provided by the Bragg grating, that does not exist in the "doubly periodic" gratings.

Experimental demonstration of 1D crossed gratings for polarization-independent high-Q filtering

We demonstrate experimentally a spectral filter with high Q-factor (≃3238), wide accordability range (1500-1600 nm) with respect to the angle of incidence, and record polarization independence. This work is an experimental validation of the theoretical work reported in [Opt. Lett. 36, 1662 (2011)]: the filter is composed of two 1D crossed gratings engraved on each side of a planar waveguide. We provide a good comparison with theory and physical interpretations of the features observed experimentally.

Tunable, polarization independent, narrow-band filtering with one-dimensional crossed resonant gratings

We propose an optical component for widely tunable, narrow-band filtering. It takes advantage of the tunability properties, with respect to the angle of incidence, of guided-mode resonance filters. The intrinsic polarization sensitivity of the resonances is suppressed by exciting the modes through two identical, differently oriented one-dimensional gratings flanking a thick substrate. An example is provided that theoretically shows a polarization independent peak at 1.6 μm with a Q factor of 13,000 and a reflectivity greater than 99% at resonance, which is tunable over 100 nm. Finally, we discuss the fabrication limitations and conclude that the proposed configuration is realistic.

Measurement and modeling of 2D hexagonal resonant-grating filter performance

We report the measurement of a polarization-independent guided-mode resonant filter with a Q factor of approximately 2200 functioning near normal incidence in the near infrared (850 nm). Besides this remarkable performance, we provide a detailed optical and structural characterization of the component, which points out the origins of the limitation of the experimental performance. We conclude that the defaults in question can be corrected by improving the lithography process, and we are confident that even greater performance will be obtained in future realizations.