1
|
Abstract
AIMS Between 15% and 20% of patients remain dissatisfied following total knee arthroplasty (TKA). The SAIPH knee system (MatOrtho, Surrey, United Kingdom) is a medial ball and socket TKA that has been designed to replicate native knee kinematics in order to maximize the range of movement, stability, and function. This system is being progressively introduced in a stepwise fashion, with this study reporting the mid-term clinical and radiological outcomes. PATIENTS AND METHODS A retrospective review was undertaken of the first 100 consecutive patients with five-year follow-up following SAIPH TKA performed by the senior authors. The data that were collected included the demographics of the patients, clinical findings, the rate of intraoperative ligamentous release, patient-reported outcome measures (PROMS), radiological assessment, complications, and all-cause revision. Revision data were cross-checked with a national registry. RESULTS A total of 100 TKAs in 92 patients were included. Three patients died (three TKAs) and a further two TKAs were revised. Of the remaining 95 TKAs, five-year follow-up data were available for 81 TKAs (85%) in 87 patients. There were significant improvements in all PROMs and high satisfaction. The mean ROM at final follow-up was from 0° (full extension) to 124° flexion. There were seven major complications (7%): one infection, two deep vein thromboses, one cerebrovascular event, and two patients with stiffness requiring a manipulation under anaesthesia. Two patients required a lateral retinacular release to optimize patellar tracking in valgus knees; no additional ligament releases were performed in any patient. Radiological analysis demonstrated no evidence of implant-related complications. CONCLUSION These results demonstrate satisfactory clinical and radiological outcomes at five years following a medial ball and socket TKA. The complication and revision rates are consistent with those previously reported for patients undergoing TKA. These results demonstrate the safety and efficacy of the SAIPH Knee TKA system and support its wider use.
Collapse
Affiliation(s)
- A M Katchky
- Department of Orthopaedics and Rehabilitation, Robert Larner College of Medicine, University of Vermont; Orthopaedic Surgeon, University of Vermont Medical Center, Burlington, Vermont, USA
| | - C W Jones
- Fiona Stanley Hospital Group and Orthopaedics Western Australia; Senior Research Fellow, Curtin University, Western Australia; Senior Clinical Lecturer, University of Sydney, Sydney, Australia
| | - W L Walter
- Orthopaedics and Traumatic Surgery, University of Sydney, Sydney, Australia, Royal North Shore Hospital, Sydney, Australia; Mater Hospital, Sydney, Australia
| | - A J Shimmin
- Monash University, Melbourne, Melbourne Orthopaedic Group, Melbourne, Australia
| |
Collapse
|
2
|
Vogelnest L, Shimmin AJ, Moses PA, Simpson DJ, Liptak JM. Use of osteogenic protein-1 in the management of a nonunion radial fracture in a Squirrel Monkey (Saimiri boliviensis)*. Vet Comp Orthop Traumatol 2018. [DOI: 10.1055/s-0038-1632693] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/17/2022]
Abstract
SummaryA Squirrel Monkey (Saimiri boliviensis) presented with comminuted, proximal diaphyseal fractures of the left radius and ulna which were repaired with a type II acrylic external fixateur and intramedullary pin, respectively. The external fixateur was removed six weeks postoperatively as the antebrachium was stable despite radiographic evidence that the radial fracture had failed to completely heal. Eight months postoperatively, radiographic examination revealed a nonunion fracture of the proximal radial diaphysis. The nonunion fracture was stabilised with a miniplate and screws, and osteogenic protein-1 (OP-1) (bone morphogenetic protein-7) was inserted to augment bony union. Radiographic evidence of fracture healing was present four weeks postoperatively. Bone morphogenetic proteins, in particular OP-1, can be used as a substitute for autogenous cancellous bone if there is an insufficient quantity of cancellous bone or harvesting will result in unacceptable morbidity.Osteogenic protein-1 (OP-1 or bone morphogenetic protein 7) was used in the management of a nonunion fracture of the radius in a Squirrel Monkey (Saimiri boliviensis). Osteogenic protein-1 was used in preference to autogenous cancellous bone as the small size of the monkey would have limited the quantity of cancellous bone and predisposed to morbidity at the harvest site. This is the first report of the clinical use of OP-1 in veterinary surgery.
Collapse
|
3
|
Pierrepont J, Hawdon G, Miles BP, Connor BO, Baré J, Walter LR, Marel E, Solomon M, McMahon S, Shimmin AJ. Variation in functional pelvic tilt in patients undergoing total hip arthroplasty. Bone Joint J 2017; 99-B:184-191. [DOI: 10.1302/0301-620x.99b2.bjj-2016-0098.r1] [Citation(s) in RCA: 125] [Impact Index Per Article: 17.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 05/15/2016] [Accepted: 10/25/2016] [Indexed: 11/05/2022]
Abstract
Aims The pelvis rotates in the sagittal plane during daily activities. These rotations have a direct effect on the functional orientation of the acetabulum. The aim of this study was to quantify changes in pelvic tilt between different functional positions. Patients and Methods Pre-operatively, pelvic tilt was measured in 1517 patients undergoing total hip arthroplasty (THA) in three functional positions – supine, standing and flexed seated (the moment when patients initiate rising from a seated position). Supine pelvic tilt was measured from CT scans, standing and flexed seated pelvic tilts were measured from standardised lateral radiographs. Anterior pelvic tilt was assigned a positive value. Results The mean pelvic tilt was 4.2° (-20.5° to 24.5°), -1.3° (-30.2° to 27.9°) and 0.6° (-42.0° to 41.3°) in the three positions, respectively. The mean sagittal pelvic rotation from supine to standing was -5.5° (-21.8° to 8.4°), from supine to flexed seated was -3.7° (-48.3° to 38.6°) and from standing to flexed seated was 1.8° (-51.8° to 39.5°). In 259 patients (17%), the extent of sagittal pelvic rotation could lead to functional malorientation of the acetabular component. Factoring in an intra-operative delivery error of ± 5° extends this risk to 51% of patients. Conclusion Planning and measurement of the intended position of the acetabular component in the supine position may fail to predict clinically significant changes in its orientation during functional activities, as a consequence of individual pelvic kinematics. Optimal orientation is patient-specific and requires an evaluation of functional pelvic tilt pre-operatively. Cite this article: Bone Joint J 2017;99-B:184–91.
Collapse
Affiliation(s)
- J. Pierrepont
- The University of Sydney, School of Aerospace,
Mechanical and Mechatronic Engineering, Building J07, Sydney NSW
2006, Australia and Optimized Ortho, 17 Bridge
Street, Pymble NSW 2073, Australia
| | - G. Hawdon
- Malabar Orthopaedic Clinic, 43
The Avenue, Windsor, VIC
3181, Australia
| | - B. P. Miles
- Optimized Ortho, 17
Bridge Street, Pymble NSW 2073, Australia
| | - B. O’ Connor
- Optimized Ortho, 17
Bridge Street, Pymble NSW 2073, Australia
| | - J. Baré
- Melbourne Orthopaedic Group, 33
The Avenue, Windsor, VIC
3191, Australia
| | - L. R. Walter
- Peninsula Orthopaedics, 812
Pittwater Rd, Dee Why, NSW
2099, Australia
| | - E. Marel
- Peninsula Orthopaedics, 812
Pittwater Rd, Dee Why, NSW
2099, Australia
| | - M. Solomon
- Sydney Orthopaedic Specialists, Suite
29, Prince of Wales Private Hospital, Randwick
NSW 2031, Australia
| | - S. McMahon
- Monash University, 43
The Avenue, Windsor VIC 3181, Australia
| | - A. J. Shimmin
- Monash
University, 43 The Avenue, Windsor VIC 3181, Australia and Melbourne
Orthopaedic Group, 33 The Avenue, Windsor, VIC
3191, Australia
| |
Collapse
|
4
|
Spencer-Gardner L, Pierrepont J, Topham M, Baré J, McMahon S, Shimmin AJ. Patient-specific instrumentation improves the accuracy of acetabular component placement in total hip arthroplasty. Bone Joint J 2016; 98-B:1342-1346. [DOI: 10.1302/0301-620x.98b10.37808] [Citation(s) in RCA: 45] [Impact Index Per Article: 5.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 12/30/2015] [Accepted: 06/02/2016] [Indexed: 01/02/2023]
Abstract
Aims Accurate placement of the acetabular component during total hip arthroplasty (THA) is an important factor in the success of the procedure. However, the reported accuracy varies greatly and is dependent upon whether free hand or navigated techniques are used. The aim of this study was to assess the accuracy of an instrument system that incorporates 3D printed, patient-specific guides designed to optimise the placement of the acetabular component. Patients and Methods A total of 100 consecutive patients were prospectively enrolled and the accuracy of placement of the acetabular component was measured using post-operative CT scans. Results The mean absolute deviation from the planned inclination and anteversion was 3.9° (0.0° to 13.6°) and 3.6° (0.0° to 12.9°), respectively. In 91% of cases the planned target of +/-10° was achieved for both inclination and anteversion. Conclusion Accurate placement of the acetabular component can be achieved using patient-specific guides and is superior to free hand techniques and comparable to navigated and robotic techniques. Cite this article: Bone Joint J 2016;98-B:1342–6.
Collapse
Affiliation(s)
- L. Spencer-Gardner
- Melbourne Orthopaedic Group, 33
The Avenue, Windsor, VIC
3181, Australia
| | - J. Pierrepont
- University of Sydney, Building
J07, Level 4. Sydney, NSW
2006, Australia
| | - M. Topham
- Optimized Ortho, 17
Bridge Street Pymble, NSW 2073, Australia
| | - J. Baré
- Melbourne Orthopaedic Group, 33
The Avenue, Windsor, VIC
3181, Australia
| | - S. McMahon
- Monash University, Malabar Orthopaedic
Clinic, 43 The Avenue, Windsor, VIC
3181, Australia
| | - A. J. Shimmin
- Monash University, 33
The Avenue, Windsor 3181, Victoria, Australia
| |
Collapse
|
5
|
Pierrepont JW, Feyen H, Miles BP, Young DA, Baré JV, Shimmin AJ. Functional orientation of the acetabular component in ceramic-on-ceramic total hip arthroplasty and its relevance to squeaking. Bone Joint J 2016; 98-B:910-6. [DOI: 10.1302/0301-620x.98b7.37062] [Citation(s) in RCA: 40] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 08/22/2015] [Accepted: 03/07/2016] [Indexed: 11/05/2022]
Abstract
Aims Long-term clinical outcomes for ceramic-on-ceramic (CoC) bearings are encouraging. However, there is a risk of squeaking. Guidelines for the orientation of the acetabular component are defined from static imaging, but the position of the pelvis and thus the acetabular component during activities associated with edge-loading are likely to be very different from those measured when the patient is supine. We assessed the functional orientation of the acetabular component. Patients and Methods A total of 18 patients with reproducible squeaking in their CoC hips during deep flexion were investigated with a control group of 36 non-squeaking CoC hips. The two groups were matched for the type of implant, the orientation of the acetabular component when supine, the size of the femoral head, ligament laxity, maximum hip flexion and body mass index. Results The mean functional anteversion of the acetabular component at the point when patients initiated rising from a seated position was significantly less in the squeaking group than in the control group, 8.1° (-10.5° to 36.0°) and 21.1° (-1.9° to 38.4°) respectively (p = 0.002). Conclusion The functional orientation of the acetabular component during activities associated with posterior edge-loading are different from those measured when supine due to patient-specific pelvic kinematics. Individuals with a large anterior pelvic tilt during deep flexion might be more susceptible to posterior edge-loading and squeaking as a consequence of a significant decrease in the functional anteversion of the acetabular component. Cite this article: Bone Joint J 2016;98-B:910–16.
Collapse
Affiliation(s)
- J. W. Pierrepont
- The University of Sydney, NSW
2006, Australia; Optimized Ortho, NSW, Australia
| | - H. Feyen
- Melbourne Orthopaedic Group, 33
The Avenue, Windsor, VIC
3181, Australia
| | | | - D. A. Young
- Melbourne Orthopaedic Group, 33
The Avenue, Windsor, VIC
3181, Australia
| | - J. V. Baré
- Melbourne Orthopaedic Group, 33
The Avenue, Windsor, VIC
3181, Australia
| | - A. J. Shimmin
- Melbourne Orthopaedic Group, 33
The Avenue, Windsor, VIC
3181, Australia
| |
Collapse
|
6
|
Abstract
Many different lengths of stem are available for use in primary total hip replacement, and the morphology of the proximal femur varies greatly. The more recently developed shortened stems provide a distribution of stress which closely mimics that of the native femur. Shortening the femoral component potentially comes at the cost of decreased initial stability. Clinical studies on the performance of shortened cemented and cementless stems are promising, although long-term follow-up studies are lacking. We provide an overview of the current literature on the anatomical features of the proximal femur and the biomechanical aspects and clinical outcomes associated with the length of the femoral component in primary hip replacement, and suggest a classification system for the length of femoral stems.
Collapse
Affiliation(s)
- H Feyen
- Melbourne Orthopaedic Group, 33 the Avenue, Windsor, 3181, Victoria, Australia
| | | |
Collapse
|
7
|
McDonnell SM, Boyce G, Baré J, Young D, Shimmin AJ. The incidence of noise generation arising from the large-diameter Delta Motion ceramic total hip bearing. Bone Joint J 2013; 95-B:160-5. [PMID: 23365022 DOI: 10.1302/0301-620x.95b2.30450] [Citation(s) in RCA: 72] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Noise generation has been reported with ceramic-on-ceramic articulations in total hip replacement (THR). This study evaluated 208 consecutive Delta Motion THRs at a mean follow-up of 21 months (12 to 35). There were 141 women and 67 men with a mean age of 59 years (22 to 84). Patients were reviewed clinically and radiologically, and the incidence of noise was determined using a newly described assessment method. Noise production was examined against range of movement, ligamentous laxity, patient-reported outcome scores, activity level and orientation of the acetabular component. There were 143 silent hips (69%), 22 (11%) with noises other than squeaking, 17 (8%) with unreproducible squeaking and 26 (13%) with reproducible squeaking. Hips with reproducible squeaking had a greater mean range of movement (p < 0.001) and mean ligament laxity (p = 0.004), smaller median head size (p = 0.01) and decreased mean acetabular component inclination (p = 0.02) and anteversion angle (p = 0.02) compared with the other groups. There was no relationship between squeaking and age (p = 0.13), height (p = 0.263), weight (p = 0.333), body mass index (p = 0.643), gender (p = 0.07) or patient outcome score (p = 0.422). There were no revisions during follow-up. Despite the surprisingly high incidence of squeaking, all patients remain satisfied with their hip replacement.
Collapse
Affiliation(s)
- S M McDonnell
- Knee & Hip Fellow Nuffield Orthopaedic Centre, Oxford, Windmill Road, Headington, Oxford OX3 7LD, UK
| | | | | | | | | |
Collapse
|
8
|
Abstract
We report the findings of an independent review of 230 consecutive Birmingham hip resurfacings (BHRs) in 213 patients (230 hips) at a mean follow-up of 10.4 years (9.6 to 11.7). A total of 11 hips underwent revision; six patients (six hips) died from unrelated causes; and 13 patients (16 hips) were lost to follow-up. The survival rate for the whole cohort was 94.5% (95% confidence interval (CI) 90.1 to 96.9). The survival rate in women was 89.1% (95% CI 79.2 to 94.4) and in men was 97.5% (95% CI 92.4 to 99.2). Women were 1.4 times more likely to suffer failure than men. For each millimetre increase in component size there was a 19% lower chance of a failure. The mean Oxford hip score was 45.0 (median 47.0, 28 to 48); mean University of California, Los Angeles activity score was 7.4 (median 8.0, 3 to 9); mean patient satisfaction score was 1.4 (median 1.0, 0 to 9). A total of eight hips had lysis in the femoral neck and two hips had acetabular lysis. One hip had progressive radiological changes around the peg of the femoral component. There was no evidence of progressive neck narrowing between five and ten years. Our results confirm that BHR provides good functional outcome and durability for men, at a mean follow-up of ten years. We are now reluctant to undertake hip resurfacing in women with this implant.
Collapse
Affiliation(s)
- G Coulter
- Melbourne Orthopaedic Group, 33 The Avenue Windsor, Melbourne 3181, Australia
| | | | | | | |
Collapse
|
9
|
Abstract
The survivorship of contemporary resurfacing arthroplasty of the hip using metal-on-metal bearings is better than that of first generation designs, but short-term failures still occur. The most common reasons for failure are fracture of the femoral neck, loosening of the component, osteonecrosis of the femoral head, reaction to metal debris and malpositioning of the component. In 2008 the Australian National Joint Registry reported an inverse relationship between the size of the head component and the risk of revision in resurfacing hip arthroplasty. Hips with a femoral component size of ≤ 44 mm have a fivefold increased risk of revision than those with femoral components of ≥ 55 mm irrespective of gender. We have reviewed the literature to explore this observation and to identify possible reasons including the design of the implant, loading of the femoral neck, the orientation of the component, the production of wear debris and the effects of metal ions, penetration of cement and vascularity of the femoral head. Our conclusion is that although multifactorial, the most important contributors to failure in resurfacing arthroplasty of the hip are likely to be the design and geometry of the component and the orientation of the acetabular component.
Collapse
Affiliation(s)
- A. J. Shimmin
- Melbourne Orthopaedic Group Research Foundation, 33 The Avenue, Windsor, 3181 Victoria, Australia
| | - W. L. Walter
- Specialist Orthopaedic Group Mater Clinic, Suite 1.08, 3-9 Gillies Street, North Sydney, New South Wales 2060, Australia
| | - C. Esposito
- Specialist Orthopaedic Group Mater Clinic, Suite 1.08, 3-9 Gillies Street, North Sydney, New South Wales 2060, Australia
| |
Collapse
|
10
|
Hing CB, Back DL, Bailey M, Young DA, Dalziel RE, Shimmin AJ. The results of primary Birmingham hip resurfacings at a mean of five years. An independent prospective review of the first 230 hips. ACTA ACUST UNITED AC 2008; 89:1431-8. [PMID: 17998177 DOI: 10.1302/0301-620x.89b11.19336] [Citation(s) in RCA: 123] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Abstract
We report an independent prospective review of the first 230 Birmingham hip resurfacings in 212 patients at a mean follow-up of five years (4 to 6). Two patients, one with a loose acetabular component and the other with suspected avascular necrosis of the femoral head, underwent revision. There were two deaths from unrelated causes and one patient was lost to follow-up. The survivorship with the worst-case scenario was 97.8% (95% confidence interval 95.8 to 99.5). The mean Harris hip score improved significantly (paired t-test, p < 0.05) from 62.54 (8 to 92) pre-operatively to 97.7 (61 to 100) at a mean of three years (2.1 to 4.3), then deteriorated slightly to a mean of 95.2 (47 to 100) at a mean of five years. The mean flexion improved from 91.5 degrees (25 degrees to 140 degrees) to 110.4 degrees (80 degrees to 145 degrees) at a mean of three years with no further improvement at five years (111.2 degrees; 70 degrees to 160 degrees). On radiological review at five years, one patient had a progressive lucent line around the acetabular component and six had progressive lucent lines around the femoral component. A total of 18 femoral components (8%) had migrated into varus and those with lucent lines present migrated a mean of 3.8 degrees (1.02 degrees to 6.54 degrees) more than the rest. Superolateral notching of the femoral neck and reactive sclerosis at the tip of the peg of the femoral component were associated with the presence of lucent lines (chi-squared test, p < 0.05), but not with migration of the femoral component, and are of unknown significance. Our results with the Birmingham hip resurfacing continue to be satisfactory at a mean follow-up of five years.
Collapse
Affiliation(s)
- C B Hing
- Melbourne Orthopaedic Group, 33 The Avenue, Windsor, Victoria 3181, Australia
| | | | | | | | | | | |
Collapse
|
11
|
Hing CB, Young DA, Dalziel RE, Bailey M, Back DL, Shimmin AJ. Narrowing of the neck in resurfacing arthroplasty of the hip: a radiological study. ACTA ACUST UNITED AC 2007; 89:1019-24. [PMID: 17785738 DOI: 10.1302/0301-620x.89b8.18830] [Citation(s) in RCA: 101] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/28/2023]
Abstract
Narrowing of the femoral neck after resurfacing arthroplasty of the hip has been described previously in both cemented and uncemented hip resurfacing. The natural history of narrowing of the femoral neck is unknown. We retrospectively measured the diameter of the femoral neck in a series of 163 Birmingham hip resurfacings in 163 patients up to a maximum of six years after operation to determine the extent and progression of narrowing. There were 105 men and 58 women with a mean age of 52 years (18 to 82). At a mean follow-up of five years, the mean Harris hip score was 94.8 (47 to 100) and the mean flexion of the hip 112.5 degrees (80 degrees to 160 degrees ). There was some narrowing of the femoral neck in 77% (125) of the patients reviewed, and in 27.6% (45) the narrowing exceeded 10% of the diameter of the neck. A multiple logistic regression analysis showed a significant association (chi-squared test (derived from logistic regression) p = 0.01) of narrowing with female gender and a valgus femoral neck/shaft angle. There was no significant association between the range of movement, position or size of the component or radiological lucent lines and narrowing of the neck (chi-squared test; p = 0.10 (flexion), p = 0.08 (size of femoral component), p = 0.09 (size of acetabular component), p = 0.71 (femoral component angulation), p = 0.99 (lucent lines)). There was no significant difference between the diameter of the neck at a mean of three years (2.5 to 3.5) and that at five years (4.5 to 5.5), indicating that any change in the diameter of the neck had stabilised by three years (sign rank test, p = 0.60). We conclude that narrowing of the femoral neck which is found with the Birmingham hip resurfacing arthroplasty is in most cases associated with no adverse clinical or radiological outcome up to a maximum of six years after the initial operation.
Collapse
Affiliation(s)
- C B Hing
- Melbourne Orthopaedic Group, Windsor, Victoria, Australia
| | | | | | | | | | | |
Collapse
|
12
|
Abstract
We prospectively monitored changes in serum cobalt and chromium levels after a new generation metal-on-metal hip resurfacing and the affect on renal function. Levels were measured using inductively coupled plasma mass spectrometry and atomic absorption spectrometry, preoperatively then sequentially at 3, 6, 9, 12, and 24 months. For serum cobalt, there was an initial increase to a peak level at 6 months, followed by a gradual decline during the next 15 months. A similar trend was observed in serum chromium, although the peak level occurred slightly later, at 9 months. There was no adverse affect on renal function during the 2-year study period. All implants were functioning well, with no radiographic evidence of loosening. These levels will continue to be monitored to establish when minimum metal ion levels are reached.
Collapse
Affiliation(s)
- Diane L Back
- Melbourne Orthopaedic Group, Melbourne, Australia
| | | | | |
Collapse
|
13
|
Abstract
Between April 1999 and April 2004, 3497 Birmingham hips were inserted by 89 surgeons. Fracture of the neck of the femur occurred in 50 patients, an incidence of 1.46%. Complete data were available for 45 patients in whom the incidence was 1.91% for women and 0.98% for men. The relative risk of fracture for women vs men was 1.94961 and this was statistically significant (p < 0.01). The mean time to fracture was 15.4 weeks. In women the fractures occurred at a mean of 18.5 weeks and were more likely to have been preceded by a prodromal phase of pain and limping. In men the mean time to fracture was 13.5 weeks. Significant varus placement of the femoral component, intra-operative notching of the femoral neck and technical problems were common factors in 85% of cases.
Collapse
Affiliation(s)
- A J Shimmin
- Melbourne Orthopaedic Group, 33 The Avenue, Windsor, Victoria 3181, Australia.
| | | |
Collapse
|
14
|
Abstract
Hip resurfacing arthroplasty is an old orthopedic concept that has undergone a resurgence of interest in the past decade. Because of the rapid increase in the number of procedures being performed, previously recognized complications have begun to recur. This article focuses on complications that are related to the hip resurfacing procedure such as femoral neck fractures, avascular necrosis, raised metal ion levels, and sound initial and durable long-term fixation of an all-metal monoblock cobalt/chrome acetabular component. Dislocation rates after resurfacing and other complications are briefly discussed.
Collapse
Affiliation(s)
- A J Shimmin
- The Melbourne Orthopaedic Group, 33 The Avenue Windsor, 3181 Melbourne, Australia.
| | | | | |
Collapse
|