Ferrule Design Does Not Affect the Biomechanical Behavior of Anterior Teeth Under Mechanical Fatigue: An In Vitro Evaluation

Objectives:

To investigate the survival and failure mode of fiber-post resin restorations over preparations with different ferrule designs when submitted to a fatigue load test.

Methods and Materials:

Fifty bovine incisors were selected and divided into five groups (n=10) according to ferrule design: a no-ferrule group, a 2-mm circumferential ferrule group, a 2-mm buccal ferrule group, a 2-mm lingual ferrule group, and a 2-mm buccal and lingual ferrule group. The fiberglass post was cemented and the composite core was built up and prepared, followed by cementation of a full composite crown. The samples were subjected to a cyclic fatigue test with loading applicator at 135°; a staircase approach was used until fracture. Survival (cycles to fracture) and failure modes were recorded. Survival data were analyzed with the log-rank test, while Kruskal-Wallis and Fisher exact tests were used to analyze failure mode data (α=0.05).

Results:

The median number of cycles to fracture ranged from 215,000 to 236,153. The log-rank test showed no statistically significant difference in survival rates among the groups (p=0.82). Regarding failure mode, three types were observed: I, post and/or core fracture; II, root fracture in the cervical third; and III, root fracture in the middle third. No statistical difference was observed among the groups (Kruskal-Wallis test, p=0.147).

Conclusion:

The ferrule design had no effect on fatigue resistance or failure mode of endodontically treated incisor teeth restored with a fiber post, composite core buildup, and composite crown.

Radiopacity and Porosity of Bulk-fill and Conventional Composite Posterior Restorations—Digital X-ray Analysis

Objectives:

To compare radiopacity and porosity as expressed by the presence of voids in restorations carried out using bulk-fill and incremental filling techniques to restore large mesio-occlusal-distal (MOD) cavities.

Methods:

Fifty-five molars with MOD preparations were incrementally filled with Filtek Z-350XT (Z350XT) or bulk-fill composite: Filtek Bulk Fill/Z-350XT (FBF/Z350XT), Venus Bulk Fill/Charisma Diamond (VBF/CHA), SDR/Esthet-X HD (SDR/EST-X), Tetric EvoCeram Bulk Fill (TEC). Digital radiographic images (Vistascan scanner) were taken of restored molars and analyzed at the gingival and isthmus floors. Radiodensity measurements were performed using standardized points symmetrically distributed over each region of composite and tooth structure. Three calibrated evaluators visually assessed the presence of voids. Confidence intervals were calculated, and data were analyzed using analysis of variance and χ2 tests.

Results:

TEC and VBF/CHA showed significantly higher radiodensities, while the lowest values were observed for FBF/Z350XT and Z350XT. Radiodensity at the cervical regions tended to be greater than that found at the isthmus floor. The lowest incidence of voids was found for VBF/CHA, whereas the incremental insertion technique resulted in the highest rate of voids.

Conclusion:

Bulk-fill composite resin demonstrated an adequate level of radiodensity and a reduced presence of voids compared with the incremental filling technique.

Preemptive Use of Naproxen on Tooth Sensitivity Caused by In-Office Bleaching: A Triple-Blind, Crossover, Randomized Clinical Trial

Objectives:

A triple-blind, randomized, crossover clinical trial evaluated prior use of nonsteroidal anti-inflammatory naproxen on sensitivity reported by patients undergoing in-office tooth bleaching.

Methods and Materials:

Fifty patients were subjected to two sessions of in-office tooth bleaching with 35% hydrogen peroxide in a single application of 40 minutes for two sessions, with an interval of seven days between applications. One hour prior to the procedure, each patient randomly received a single dose of naproxen (500 mg) or placebo. The patient's sensitivity level was evaluated during and immediately after the bleaching using two scales (verbal and visual analog); the verbal scale only was repeated after 24 hours. The effectiveness of the bleaching procedures was evaluated with the Bleachedguide scale. Relative risk to sensitivity was calculated and adjusted by session, while comparison of overall risk was performed by the McNemar test. Data on the sensitivity level for both scales and shade were subjected to the Friedman, Wilcoxon, and Mann-Whitney tests (α=0.05).

Results:

The use of naproxen only decreased the absolute risk and intensity of tooth sensitivity reported immediately after the second session. On the other hand, no measurable effect was observed during or 24 hours after either session. The sequence of drug administration did not affect the bleaching effectiveness.

Conclusions:

Preemptive use of naproxen only reduced tooth sensitivity reported by patients immediately after the second session of bleaching.

The Impact of a Customized Tray on In-Office Bleaching Tooth Sensitivity: A Randomized Clinical Trial

Objective

It was recently demonstrated that using a tray over a bleaching agent reduces its pulpal chamber penetration, which can reduce tooth sensitivity. This study evaluated the effect of the sealed technique on the presence and level of sensitivity reported by patients during and after the bleaching procedure performed in office.

Methods

Forty-six patients underwent a bleaching procedure with 35% hydrogen peroxide used in a single application of 45 minutes for two sessions with an interval of seven days. A customized tray was maintained over the bleaching agent during the entire procedure in half of the patients. The sensitivity level was evaluated during and immediately after the bleaching using verbal and visual analogue scales. The shade alteration was evaluated with a bleach guide scale. The peak sensitivity after 24 hours and the presence/level at 24 hours were also evaluated using a verbal rating scale. Relative risks were calculated for all time assessments. Data on the sensitivity level for both scales were subjected to Friedman and Mann-Whitney tests (α=0.05). Data on the shades were analyzed by two-way repeated-measures analysis of variance and Tukey's test (α=0.05).

Results

The use of a customized tray increased the relative risks to the tooth measured 24 hours after each bleaching session. The sealed technique also increased the level of tooth sensitivity only at 24 hours after the first session. No difference was observed between the bleaching techniques regarding the shade evaluation.

Conclusion

Using a tray over the bleaching agent can increase the level and risk of tooth sensitivity for the first 24 hours after in-office bleaching.

Bonding of Adhesive Luting Agents to Caries-affected Dentin Induced by a Microcosm Biofilm Model

OBJECTIVES

To evaluate the bond strength of adhesive luting agents applied to caries-affected dentin (CAD).

METHODS

Thirty-six noncarious human third molars were abraded to expose an occlusal dentin surface. Caries lesions were induced in half of the samples using a microcosm biofilm model. Biofilm was cultivated under an anaerobic atmosphere for 14 days in a medium enriched with mucin. The same medium containing 1% sucrose was alternated for 4 hours per day. Cylinders of resin cement (RelyX ARC, RelyX U200, or BisCem) were built up over the dentin substrate and submitted to shear bond load. The samples were then longitudinally sectioned. The hardness and elastic modulus of dentin were measured at different depths from the occlusal surface. A three-dimensional finite element simulation was performed to analyze the residual stress distribution during the shear bond strength test. Bond strength data were analyzed by two-way analysis of variance (ANOVA) and hardness and elastic modulus by split-plot ANOVA. Multiple comparisons were performed with the SNK test (α=0.05).

RESULTS

For all cements, the highest bond strengths were observed in sound dentin. Relyx ARC bond strength was similar to that of RelyX U200 for both substrates; BisCem had the lowest values. CAD had lower hardness (above a depth of 100 μm) and elastic modulus (above a depth of 150 μm) values than sound dentin. Stress distribution during the bond strength test was similar under all experimental conditions.

CONCLUSION

Impairment of the mechanical properties of dentin promoted by carious lesions reduced the bond strength of adhesive luting agents.

Effect of increased post length due to the presence of the remaining coronal structure on the fracture strength of post-retained restorations

This study evaluated the effects of the remaining coronal tissue and post type on the fracture strength of incisors. Sixty human maxillary central incisors were sectioned at the cemento-enamel junction or at 2 mm above this junction. The roots received cast cores and posts, fibre posts, or relined fibre posts (n = 10 each). A compressive load was applied over the cores untilfracture. In the absence of coronal structure, the fracture strength did not differ among the post types evaluated. In the presence of remaining coronal structure, the fracture strength was higher in specimens with cast cores and posts.

Fracture resistance and stress distribution of simulated immature teeth after apexification with mineral trioxide aggregate

AIM

To evaluate the effect of adhesive restorations on fracture resistance and stress distribution in teeth with simulated immature apices and apical plugs of mineral trioxide aggregate (MTA).

METHODOLOGY

Sixty bovine incisors were sectioned 8 mm above and 12 mm below the cemento-enamel junction (CEJ). The root canal was enlarged using a diamond bur, resulting in remaining root canal walls with 0.1-0.2 mm of thickness. A 5-mm apical plug of MTA was placed and the teeth were restored according to the following groups: GP--the root canal was filled with gutta-percha and endodontic sealer; CR--the root canal was filled with light-cured composite resin inserted incrementally; FP--a fibre post was cemented into the root canal; and RFP--the fibre post was relined with composite resin prior to the cementation into the root canal. A load was applied on the crown of all teeth at 135° to their long axis until fracture. Data was analysed by one-way anova and SNK tests (α = 0.05), whilst the fracture pattern was evaluated according to the position of the fracture. Stress distributions in the restored teeth were verified by finite element analysis.

RESULTS

Teeth restored with fibre posts and relined fibre posts were associated with the highest fracture resistance, whilst the GP group had the lowest values. GP and RC groups had similar fracture resistance values (P = 0.109). All fractures types involved the cervical and middle thirds of roots. The GP model had high levels of stress concentration in the cervical and middle thirds of roots. No difference was found amongst the stress concentration in the RC, FP and RFP models.

CONCLUSION

Restorative protocols alter the fracture resistance and stress distribution of immature teeth after placement of MTA apical plugs.

Etching a Fiber Post Surface with High-concentration Bleaching Agents

Introduction

Commonly, resin composites/cements fail to achieve proper bonding to fiber posts when their surfaces have not been previously etched. This study evaluated the effect of the concentration and application mode of hydrogen peroxide on the surface topography and bond strength of resin composite to glass-fiber posts.

Methods and Materials

Fiber posts were immersed in 24% or 35% solutions (a high-concentration bleaching agent) of hydrogen peroxide (H2O2), or these solutions were applied over the post surface using a microbrush (n=10). Posts without any treatment were used as a control. After etching, the posts were silanated and an adhesive was applied. The posts were positioned in a mold, and a resin composite was incrementally inserted and light-cured. The post/resin assembly was serially sectioned into several beams that were subjected to a tensile bond strength test. The data were subjected to the two-way analysis of variance and Tukey test (α=0.05). The Dunnet's test was used to compare the experimental conditions to the control. The surface topography was analyzed using scanning electronic microscopy.

Results

The non-etched post presented a relatively smooth surface without fiber exposure. Except for the application of 24% H2O2, the other experimental conditions increased the number of exposed fibers and bond strength in relation to the control. Although immersion resulted in higher values for the 24% H2O2 application, the mode of application did not alter bond strength when 35% H2O2 was used.

Conclusions

The effect of the mode of application of H2O2 depended on its level of concentration. A high-concentration bleaching agent improved the bond strength of the resin composite to the post surface, regardless of which mode was used.