Optimization of oil yield of Pelargonium graveolens L'Hér using Box-Behnken design in relation to its antimicrobial activity and in silico study

Pelargonium graveolens L'Hér is an important species of genus Pelargonium with an economic value. The unique rose scent of its oil is used in perfume and cosmetic industry. The oil is characterized by the presence of citronellol, geraniol and rose oxide. Fresh aerial parts of P. graveolens at GC-MS analysis of four seasons revealed that autumn constituted the highest yield of the oil. For the first time, optimization of the yield of extracted oil of P. graveolens was performed employing 3-level Box-Behnken design using 3-factors. The GC-MS analysis of the essential oil was performed for the 17-runs. The optimized extraction of the oil was performed employing numerical optimization and studied for antimicrobial, Minimum Inhibitory Concentration (MIC) and biofilm inhibitory activities. The 3 factors followed rank (plant material amount > water volume > NaCl percent in water), in their magnitude of effect on increasing yield of the oil. Increasing the plant material amount increased the yield of the oil by 6-folds compared to NaCl percent in water. The optimized yield of oil (4 ml) was obtained from extraction criteria (150 g of plant, 750 ml of water and 3.585% (26.85 g) of NaCl). Computational docking was performed to overcome the multi-drug resistant Gram-negative bacilli targeting undecaprenyl pyrophosphate synthase (UPPS). The optimized oil exhibited a promising inhibitory activity against Gram-negative bacteria (K. pneumonia and P. aeruginosa) with significant antibiofilm action (P < 0.05). Moreover, it exerted a synergistic effect when combined with various antibiotics (Cefoxitin, Cloxacillin, Oxacillin and Vancomycin) against MRSA clinical strains.

Formulation and evaluation of alginate-gelatin hydrogel scaffolds loaded with zinc-doped hydroxyapatite and 5-fluorouracil

Alginate and gelatin are natural macromolecules used to formulate biocompatible drug delivery systems. Hydroxyapatite (HA) is an osteophilic ceramic used to prepare bone scaffolds. The current study aimed at preparing and characterizing HA, zinc-doped HA, and 5-fluorouracil(5-FU)-loaded alginate-gelatin-based hydrogel scaffolds using different crosslinking solutions. 5-FU incorporation efficiency, in-vitro drug release, antitumor bioassays, FTIR, X-ray-diffraction (XRD), High-Resolution Transmission, and Scanning-Electron Microscope (HR-TEM and SEM) studies were conducted. XRD showed the incorporation of Zn²⁺ into HA structure with a deformity in HA crystal lattice and inhibited crystal growth. FTIR-spectra represented the characteristic bands corresponding to HA structure. HR-TEM showed a decreased HA crystal size and rod-like crystallites that increased with increasing zinc content. Zn²⁺ content and 5-FU-loading caused significant effects on the scaffolds' thickness (p-value = 0.021 and 0.035, respectively). Burst 5-FU release within 10-15 min followed by 100 % release within 4 h was observed. Zinc content showed a significant positive effect on the cytotoxicity% of the blank and drug-loaded scaffolds. XRD and FTIR studies revealed that 5-FU was completely incorporated into the hydrogel with no chemical interaction. SEM-imaging showed interconnected pores and needle-shaped drug particles. The prepared formulations showed promising physico-chemical properties for targeted delivery of 5-FU in the form of biocompatible bone scaffolds.

Optimization of Meloxicam Solid Dispersion Formulations for Dissolution Enhancement and Storage Stability Using 33 Full Factorial Design Based on Response Surface Methodology

This study aimed to formulate and optimize solid-dispersion of meloxicam (MX) employing response-surface-methodology (RSM). RSM allowed identification of the main effects and interactions between studied factors on MX dissolution and acceleration of the optimization process. 3³ full factorial design with 27 different formulations was proposed. Effects of drug loading percentage (A), carriers' ratio (B), method of preparation (C), and their interactions on percent MX dissolved after 10 and 30 min (Q_10min & Q_30min) from fresh and stored samples were studied in distilled water. The considered levels were 2.5%, 5.0%, and 7.5% (factor A), three ratios of Soluplus®/Poloxamer-407 (factor B). Physical mixture (PM), fusion method (FM), and hot-melt-extrusion (HME) were considered factor (C). Stability studies were carried out for 3 months under stress conditions. The proposed optimization design was validated by 3-extra checkpoints formulations. The optimized formulation was selected via numerical optimization and investigated by DSC, XRD, PLM, and in vitro dissolution study. Results showed that HME technique gave the highest MX dissolution rate compared to other techniques (FM & PM). At constant level of factor (C), the amount of MX dissolved increased by decreasing MX loading and increasing Soluplus in carriers' ratio. Actual responses of the optimized formulation were in close consistency with predicted data. Amorphous form of MX in the optimized formulation was proved by DSC, XRD, and PLM. Selected factors and their levels of the optimization design were significantly valuable for demonstrating and adapting the expected formulation characteristics for rapid dissolution of MX (Q_10min= 89.09%) from fresh and stored samples.

Novel Glyceryl Monostearate- and Polyethylene Glycol 6000-Based Ibuprofen Pellets Prepared by Hot-Melt Extrusion: Evaluation and Stability Assessment

Purpose

To prepare stable sustained-release (SR) pellets, containing high ibuprofen (IBU) loading, by hot-melt extrusion (HME) technique using polyethylene glycol 6000 (PEG 6000) and glyceryl monostearate (GMS).

Methods

HME pellets (60% w/w IBU) were prepared using PEG 6000, GMS, and mixture of both polymers (1:1). Stability studies were performed under stress conditions (40 °C and relative humidity “RH” of 75%) for 6 months and at room temperature for 12 months. Fresh and stored IBU pellets were evaluated by drug content (HPLC), release rate study (USP apparatus IV), DSC, and XRD.

Results

HME succeeded to produce SR-IBU pellets with high drug loading. PEG 6000 gave higher IBU release rate and relatively unstable formula after storage. PEG 6000/GMS mixture gave prolonged IBU release up to 4 h with stable formula for 12 months at room temperature. While, IBU/GMS pellets gave SR profile up to 6 h and a stable formula under both testing conditions. These advantages of IBU/GMS pellets could be an excellent candidate for SR-IBU product. DSC and XRD analysis data (enthalpy and counts) for IBU and polymers gave a mirror image for IBU release profiles of the studied HME pellets, for both fresh and stored samples.

Conclusion

Stable SR-IBU/GMS HME pellets with high IBU loading (60% w/w) were successfully produced, for the first time, without any other excipients.

Formulation, Pharmacokinetics evaluation, and IVIVC Assessment of Gliclazide Multiparticulates in Rat Model

In vitro and in vivo studies of gliclazide (GLZ)-loaded freeze-dried alginate-gelatin (AL-GL) beads were carried out, aiming to modify its oral bioavailability. Crosslinked freeze-dried GLZ AL-GL beads (particle size: 1.5- and 3.0-mm) were prepared. In vitro evaluation of GLZ AL-GL beads included SEM, DSC, FT-IR, and release rate study in gradient media. In vivo study was single-dose (4 mg/kg), randomized, parallel-group design, two-treatment (T: test GLZ AL-GL beads and R: reference product Diamicron® 30-mg MR tablet) conducted in 96 healthy rats. Each group was subdivided into 2 sub-groups (G1 and G2) having different blood sampling schemes for up to 72 h. Assessment of level A in-vitro-in-vivo correlation (IVIVC) model was carried out. AL-GL beads successfully increased GLZ release rate compared to R. GLZ percent released (Q_4h) was 109.34, 86.85, and 43.43% for 1.5-mm and 3.0-mm beads and R, respectively. DSC analysis confirmed the interaction of AL-GL via crosslinking. No chemical interaction of GLZ has occurred as proved by FT-IR. Relative bioavailability (T/R) for AUC_0-∞ was 132.45% for G1 and 146.16% for G2. No significant differences between T and R in the primary pharmacokinetic parameters were determined. T_max values were found to be earlier in the case of G1 than those of G2. A secondary absorption peak of GLZ was clearly detected in the case of R while its sharpness was minimized in T. High IVIVC was established, and hence, the proposed in vitro release model perfectly correlated with the in vivo study. The current study design might be a platform to enable panoramic view for GLZ variability in vivo.

Optimization of gliclazide loaded alginate-gelatin beads employing central composite design

Objective: The aim of this study was to optimize the formulation of alginate-gelatin (AL-GL) beads containing gliclazide (GLZ) employing design of experiments (DOE).Significance: DOE enabled identification of the interaction between the studied factors, deep understanding of GLZ release pattern and acceleration of the optimization process.Methods: A three-factor, three-level face centered design was employed. The effects of GLZ content (GLZ%, X₁), polymer ratio (AL:GL ratio, X₂), crosslinker concentration (glutaraldehyde, GA%, X₃), and their interaction on incorporation efficiency (IE) and release rate were studied. The optimized formulation was prepared using numerical optimization and evaluated by DSC, FT-IR, SEM and release rate studies.Results: Increasing GA% (X₃) decreased IE (Y₁) with the highest magnitude of effect among the studied factors. On the other hand, increasing alginate content in AL:GL ratio (X₂) increased IE (Y₁). The amount of GLZ released Q_0.5h, Q_2h(pH 1.2) and Q_4h(pH 7.4) decreased by increasing GLZ% (X₁) and AL:GL ratio (X₂). Both drug content and AL:GL ratio appeared to affect water penetration into the gel matrix and drug release. Generally, there was a direct relationship between GA% (X₃) and GLZ release in pH 1.2 (Q_0.5h and Q_2h). However, in pH 7.4 (Q_4h), increasing GA% decreased GLZ release. In addition, increasing GA% caused deviation from zero-order release model. The actual responses of the optimized formulation were in close agreement with the predicted ones.Conclusion: The selected factors and their levels studied in the optimization design were useful for tailoring the anticipated formulation characteristics and GLZ release pattern.

Stability and bioavailability of diltiazem/polyethylene oxide matrix tablets

The aim of this study was to prepare and evaluate in vitro and in vivo; Diltiazem-Hydrochloride (DTZ) in sustained-release matrix tablets. Stability of DTZ tablets prepared with polyethylene oxide (MWs 900 000, 4 000 000, and 8 000 000) with or without addition of electrolytes was carried-out for 1-month, under short-term storage at 40 °C/75% RH. Stability was evaluated by DTZ content, DSC and drug release using the Flow-Through Cell (USP # IV). The majority of stored tablets were stable for 1-month under short-term storage with respect to DTZ content and drug release. DSC curves of stored samples showed appearance of new exothermic peak after 1-month storage at 40 °C/75% RH, which was not observed after 5 years storage at room temperature. A selected formula was tested in vivo against reference product on eight healthy human volunteers. DTZ-plasma profiles were different between the two formulae. However, no statistically significant differences were detected between C_max, AUC_0-48 and AUC_0-∞. The two products were therapeutically in-equivalent, as 90% confidence intervals "T/R" were 88.82-205.76, 91.40-139.94, and 93.73-134.97 for C_max, AUC_0-48 and AUC_0-∞, respectively. This study highlighted possible differences observed between the two regimes frequently applied for stability testing.

Controlled porosity osmotic pump system for the delivery of diclofenac sodium: in-vitro and in-vivo evaluation

The objective of this study was to develop controlled porosity osmotic pump (CPOP) tablets of diclofenac sodium (DS). The influence of different cores (polymers and osmogens) and coats (thickness and porosigen content) on DS release were studied. Results revealed that decreasing HPMC viscosity grade from 4000cp (K4M) to 15cp (E15) increased DS release. While increasing the tablet coat thickness decreased DS release. The presence of osmogen increased DS release in the following rank: mannitol > lactose > avicel. There was a direct relationship between increasing PEG-400 in the coating solution and the amount of drug released in all formulations studied, except in one condition. A comparative bioavailability study using a selected CPOP formulation (T) versus the innovator product (R) revealed that CPOP tablet maintained a less fluctuated DS plasma concentration for up to 24 h with a detected mean Cmax of 836.8 ± 142.4 and 445.0 ± 81.0 ng/mL for R and T, respectively. There were no statistically significant differences between R and T, concerning AUC0-24 and AUC0-∞. Moreover, the appearance of the multi-peak phenomenon, which is frequently observed with DS absorption, was found in only 25% of volunteers in case of T versus 75% in case of R.