Liquid Chromatographic Determination of the Glycoalkaloids α-Solanine and α-Chaconine in Potato Tubers: NMKL Interlaboratory Study

Twelve laboratories participated in a collaborative study to evaluate precision parameters of a liquid chromatographic method for analysis of the glycoalkaloids α-solanine and α-chaconine in potato tubers. Samples consisted of frozen potato tuber homogenates distributed as 3 blind duplicates and 3 split-level pairs. The analytical method included aqueous extraction, workup on disposable solidphase extraction cartridges, and reversed-phase chromatography with photometric detection at 202 nm. Results for α-solanine and α-chaconine were received from 10 and 9 laboratories, respectively. Relative standard deviations for reproducibilo ity for α-solanine and α-chaconine were similar, ranging from 8 to 13% in the applied concentration range of 12 to 260 mg/kg fresh weight.

Liquid Chromatographic Determination of Fumonisins B1, B2, and B3 in Corn: AOAC–IUPAC Collaborative Study

A liquid chromatographic (LC) method for simultaneous determination of fumonisins B1 (FB1), B2 (FB2), and B3 (FB3) in corn was subjected to a collaborative study involving 12 participants from 10 countries, in which the accuracy and reproducibility characteristics of the method were established. Mean analyte recoveries from corn ranged from 81.1 to 84.2% for FB1 (at a spiking range of 500 to 8000 ng/g), from 75.9 to 81.9% for FB2 (at a spiking range of 200 to 3200 ng/g), and from 75.8 to 86.8% for FB3 (at a spiking range of 100 to 1600 ng/g). The valid data were statistically evaluated after exclusion of outliers. Relative standard deviations for within-laboratory repeatability ranged from 5.8 to 13.2% for FB1, from 7.2 to 17.5% for FB2, and from 8.0 to 17.2% for FB3. Relative standard deviations for between-laboratory reproducibility varied from 13.9 to 22.2% for FB1, from 15.8 to 26.7% for FB2, and from 19.5 to 24.9% for FB3. HORRAT ratios, calculated for the individual toxin analogues, ranged from 0.75 to 1.73. The LC method for determination of fumonisins B1, B2, and B3 in corn (at concentrations of 800–12800 ng total fumonisins/g) has been adopted by AOAC INTERNATIONAL.

Liquid Chromatographic Determination of Aflatoxin M1 in Milk Powder Using Immunoaffinity Columns for Cleanup: Interlaboratory Study

A liquid chromatographic method for determining low aflatoxin M1 concentrations in milk was evaluated in an International Dairy Federation (IDF) interlaboratory study. The study involved 16 participants from 11 countries. The method, chosen after a comparison of several methods by a preparatory group, uses an immunoaffinity column for cleanup. As the sample passes through the column, antibodies selectively bind with aflatoxin M1 (antigen) present and form an antibody-antigen complex. All other components of the sample matrix are washed off the column with water. Then, aflatoxin M1 is eluted from the column with acetonitrile, which is collected. Final determination is carried out by reversed-phase liquid chromatography with fluorescence detection. Over the tested range (80-600 ng aflatoxin M1/kg milk powder), an RSDR ranging from 11 to 23% was obtained by analyzing 24 samples (blind duplicates), 2 samples of which were blanks.

Immunoaffinity Column Cleanup with Liquid Chromatography for Determination of Aflatoxin B1 in Corn Samples: Interlaboratory Study

An interlaboratory study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for the determination of aflatoxin B1 levels in corn samples, enforced by European Union legislation. A test portion was extracted with methanolwater (80 + 20); the extract was filtered, diluted with phosphate-buffered saline solution, filtered on a microfiber glass filter, and applied to an immunoaffinity column. The column was washed with deionized water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. Aflatoxin B1 was separated and determined by reversed-phase LC with fluorescence detection after either pre- or postcolumn derivatization. Precolumn derivatization was achieved by generating the trifluoroacetic acid derivative, used by 8 laboratories. The postcolumn derivatization was achieved either with pyridinium hydrobromide perbromide, used by 16 laboratories, or with an electrochemical cell by the addition of bromide to the mobile phase, used by 5 laboratories. The derivatization techniques used were not significantly different when compared by the Student's t-test; the method was statistically evaluated for all the laboratories. Five corn sample materials, both spiked and naturally contaminated, were sent to 29 laboratories (22 Italian and 7 European). Test portions were spiked with aflatoxin B1 at levels of 2.00 and 5.00 ng/g. The mean values for recovery were 82% for the low level and 84% for the high contamination level. Based on results for spiked samples (blind pairs at 2 levels) as well as naturally contaminated samples (blind pairs at 3 levels), the values for relative standard deviation for repeatability (RSDr) ranged from 9.9 to 28.7%. The values for relative standard deviation for reproducibility (RSDR) ranged from 18.6 to 36.8%. The method demonstrated acceptable within- and between-laboratory precision for this matrix, as evidenced by the HorRat values.

Determination of Ochratoxin A in Green Coffee by Immunoaffinity Column Cleanup and Liquid Chomatography: Collaborative Study

A collaborative study was conducted to evaluate a method using immunoaffinity column cleanup with liquid chromatography (LC) for the determination of ochratoxin A (OTA) in green coffee at levels that could be included in possible future regulations of the European Union. The test portion was extracted with methanol–3% aqueous sodium hydrogen carbonate solution (50 + 50, v/v). The extract was filtered, and the filtrate was diluted with phosphate-buffered saline and applied to an immunoaffinity column containing antibodies specific for OTA. After washing, the toxin was eluted from the column with methanol and quantified by LC with fluorescence detection. Pairs of 4 homogeneous noncontaminated and naturally contaminated materials (mean levels of <0.12, 2.44, 5.15, and 13.46 ng/g) and blank samples (<0.12 ng/g) for spiking were sent to 20 participant laboratories from 8 countries. The materials were analyzed according to the method description and all difficulties encountered in the analysis were reported. Statistical analysis was carried out according to the Harmonized Protocol of the International Union of Pure and Applied Chemistry. The relative standard deviation for repeatability (RSDr) ranged from 7.42 to 20.94%, and the relative standard deviation for reproducibility (RSDR) ranged from 16.34 to 29.17%. The method showed acceptable within-laboratory and between-laboratories precision for green coffee materials, as evidenced by HorRat values of ≤0.85, at the studied range, for spiked and naturally contaminated materials. The mean recovery was 92.8% for green coffee material spiked with OTA at a level of 4.82 ng/g.

Determination of Aflatoxin B1 in Baby Food (Infant Formula) by Immunoaffinity Column Cleanup Liquid Chromatography with Postcolumn Bromination: Collaborative Study

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for determination of aflatoxin B1 in a milk powder based infant formula at a possible future European regulatory limit (0.1 ng/g). The test portion was extracted with methanol–water (8 + 2 [v + v]), filtered, diluted with water, and applied to an immunoaffinity column. The column was washed with water to remove interfering compounds, and the purified aflatoxin B1 was eluted with methanol. The separation and determination of the aflatoxin B1 was performed by reversed-phase LC and detected by fluorescence after postcolumn derivatization (PCD) involving bromination. PCD was achieved with either pyridinum hydrobromide perbromide (PBPB) or an electrochemical (Kobra) cell by addition of bromide to the mobile phase. The baby food (infant formula) test samples, both spiked and naturally contaminated with aflatoxin B1, were sent to 14 laboratories in 13 different European countries. Test portions were spiked at levels of 0.1 and 0.2 ng/g for aflatoxin B1. Recoveries ranged from 101 to 92%. Based on results for spiked test samples (blind pairs at 2 levels) and naturally contaminated test samples (blind pairs at 3 levels), the relative standard deviation for repeatability (RSDr) ranged from 3.5 to 14%. The relative standard deviation for reproducibility (RSDR) ranged from 9 to 23%. Nine participants used PBPB derivatization, and 5 particpants used the Kobra cell. There was no evidence of method performance depending on the derivatization method used. The method showed acceptable within- and between-laboratory precision for baby food matrix, as evidenced by HORRAT values, at the target levels of determination for aflatoxin B1.

Immunoaffinity Column Cleanup with Liquid Chromatography for Determination of Aflatoxin M1 in Liquid Milk: Collaborative Study

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatographic method for determination of aflatoxin M1 in milk at proposed European regulatory limits. The test portion of liquid milk was centrifuged, filtered, and applied to an immunoaffinity column. The column was washed with water, and aflatoxin was eluted with pure acetonitrile. Aflatoxin M1 was separated by reversed-phase liquid chromatography (LC) with fluorescence detection. Frozen liquid milk samples both naturally contaminated with aflatoxin M1 and blank samples for spiking, were sent to 12 collaborators in 12 different European countries. Test portions of samples were spiked at 0.05 ng aflatoxin M1 per mL. After removal of 2 noncompliant sets of results, the mean recovery of aflatoxin M1 was 74%. Based on results for spiked samples (blind pairs at 1 level) and naturally contaminated samples (blind pairs at 3 levels) the relative standard deviation for repeatability (RSDr) ranged from 8 to 18%. The relative standard deviation for reproducibility (RSDR) ranged from 21 to 31%. The method showed acceptable within- and between-laboratory precision data for liquid milk, as evidenced by HORRAT values at the low level of aflatoxin M1 contamination.

Determination of Fumonisins B1 and B2 in Corn and Corn Flakes by Liquid Chromatography with Immunoaffinity Column Cleanup: Collaborative Study

A liquid chromatographic (LC) method for the determination of fumonisins B1 (FB1) and B2 (FB2) in corn and corn flakes was collaboratively studied by 23 laboratories, which analyzed 5 blind duplicate pairs of each matrix to establish the accuracy, repeatability, and reproducibility characteristics of the method. Fumonisin levels in the corn ranged from <0.05 (blank) to 1.41 μg/g for FB1 and from <0.05 to 0.56 μg/g for FB2, whereas in the corn flakes they ranged from <0.05 to 1.05 μg/g for FB1 and from <0.05 to 0.46 μg/g for FB2. The method involved double extraction with acetonitrile–methanol–water (25 + 25 + 50), cleanup through an immunoaffinity column, and LC determination of the fumonisins after derivatization with o-phthaldialdehyde. Relative standard deviations for the within-laboratory repeatability (RSDr) of the corn analyses ranged from 19 to 24% for FB1 and from 19 to 27% for FB2; for the corn flakes analyses, RSDr ranged from 9 to 21% for FB1 and from 8 to 22% for FB2. Relative standard deviations for the between-laboratories reproducibility (RSDR) of the corn analyses ranged from 22 to 28% for FB1 and from 22 to 30% for the FB2; for corn flakes analyses, RSDR ranged from 27 to 32% for FB1 and from 26 to 35% for FB2. Mean recoveries of FB1 and FB2 from corn spiked with FB1 at 0.80 μg/g and with FB2 at 0.40 μg/g were 76 and 72%, respectively; for corn flakes spiked at the same levels recoveries were 110 and 97% for FB1 and FB2, respectively. HORRAT ratios for the analyses of corn ranged from 1.44 to 1.53 for FB1 and from 0.96 to 1.48 for FB2, whereas for corn flakes they ranged from 1.60 to 1.82 for FB1 and from 1.39 to 1.68 for FB2.

Combined Phenyl Silane and Immunoaffinity Column Cleanup with Liquid Chromatography for Determination of Ochratoxin A in Roasted Coffee: Collaborative Study

A collaborative study was conducted to evaluate a liquid chromatography (LC) method for ochratoxin A using sequential phenyl silane and immunoaffinity column cleanup. The method was tested at 3 different levels of ochratoxin A in roasted coffee, which spanned the range of possible future European regulatory limits. The test portion was extracted with methanol and sodium bicarbonate by shaking for 30 min. The extract was filtered, centrifuged, and then cleaned up on a phenyl silane column before being eluted from the washed column with methanol–water. The eluate was diluted with phosphate-buffered saline (PBS) and applied to an ochratoxin A immunoaffinity column, which was washed with water. The ochratoxin A was eluted with methanol, the solvent was evaporated, and the residue was redissolved in injection solvent. After injection of this solution onto a reversed-phase LC apparatus, ochratoxin A was measured by fluorescence detection. Eight laboratory samples of low-level naturally contaminated roasted coffee and 2 laboratory samples of blank coffee (< 0.2 ng/g ochratoxin A at the signal-to-noise ratio of 3:1), along with ampules of ochratoxin A calibrant and spiking solutions, were sent to 15 laboratories in 13 different European countries. Test portions of the laboratory samples were spiked at levels of 4 ng/g ochratoxin A, and recoveries ranged from 65 to 97%. Based on results for spiked blank material (blind duplicates) and naturally contaminated material (blind duplicates at 3 levels), the relative standard deviation for repeatability (RSDr) ranged from 2 to 22% and the relative standard deviation for reproducibility (RSDR) ranged from 14 to 26%. The method showed acceptable within- and between-laboratory precision, as evidenced by HORRAT values, at the low level of determination for ochratoxin A in roasted coffee.

Immunoaffinity Column Cleanup with Liquid Chromatography Using Post-Column Bromination for Determination of Aflatoxins in Peanut Butter, Pistachio Paste, Fig Paste, and Paprika Powder: Collaborative Study

A collaborative study was conducted to evaluate the effectiveness of an immunoaffinity column cleanup liquid chromatography (LC) method for the determination of aflatoxin B1 and total aflatoxins at European regulatory limits. The test portion is extracted with methanol–water (8 + 2) for dried figs and paprika, and with methanol–water (8 + 2) plus hexane (or cyclohexane) for peanut butter and pistachios. The sample extract is filtered, diluted with phosphate buffer saline, and applied to an immunoaffinity column. The column is washed with water and the aflatoxins are eluted with methanol. Aflatoxins are quantitated by reversed-phase LC with post-column derivatization (PCD) involving bromination. PCD is achieved with either an electrochemical cell (Kobra cell) and addition of bromide to the mobile phase or pyridinium hydrobromide perbromide. Determination is by fluorescence. Peanut butter, pistachio paste, dried fig paste, and paprika powder samples, both naturally contaminated with aflatoxins and containing added aflatoxins, were sent to 16 collaborators in 16 European countries. Test portions of samples were spiked at levels of 2.4 and 9.6 ng/g for total aflatoxins which included 1.0 and 4.0 ng/g aflatoxin B1, respectively. Recoveries for total aflatoxins ranged from 71 to 92% with corresponding recoveries for aflatoxin B1 of 82 to 109%. Based on results for spiked samples (blind duplicates at 2 levels) as well as naturally contaminated samples (blind duplicates at 4 levels, including blank), the relative standard deviation for repeatability ranged from 4.6 to 23.3% for total aflatoxins and from 3.1 to 20.0% for aflatoxin B1. The relative standard deviation for reproducibility ranged from 14.1 to 34.2% for total aflatoxins, and from 9.1 to 32.2% for aflatoxin B1. The method showed acceptable within-laboratory and between-laboratory precision for all 4 matrixes, as evidenced by HORRAT values <1, at the low levels of determination for both total aflatoxins and aflatoxin B1.

[Which maintenance intravenous fluid in paediatrics in 2015?]

For 50 years, hypotonic solutions have been used as liquid of maintenance in paediatrics owing to the article of Holliday and Segar. For two decades, studies have shown that these hypotonic fluids can foster the acquisition of hyponatremias. The most recent literature data (meta-analysis and randomized studies) confirm that hypotonic fluids are not suitable for children hospitalized with surgical or medical problems. Current recommendations must take these results into account and advocate the use of isotonic saline solutions as maintenance intravenous fluid therapy.

User-based design specifications for the ultimate camera trap for wildlife research

Context The adoption of camera trapping in place of traditional wildlife survey methods has become common despite inherent flaws in equipment and a dearth of research to test their fit for purpose. Overwhelmingly, the development of commercial camera traps has been driven by the needs of North American hunters. Camera-trap models and features are influenced by these market forces that drive the changes in designs as new technologies develop. This focus on recreation, rather than research has often frustrated wildlife professionals as the equipment has rarely met minimum standards for scientific application. Aims We investigated the demand for white-flash camera traps around the world to highlight the demand for such camera traps in wildlife research to the manufacturing industry. We also compiled the camera-trap specifications required by scientists through the world in an effort to influence and improve the quality of camera traps for research. Methods We carried out an internet-based survey of biologists, zoologists, conservationists and other wildlife researchers by using a questionnaire to gather baseline market data on camera-trap use and demand. We also conducted an informal survey of scientists via email and in person, asking for their preferences and features of an ultimate camera-trap design. Key result Infrared camera traps are widely used and more so than white-flash camera traps, although the demand for white flash remains significant. Cost, speed, size, ease of use, versatility and the range of settings were the key features identified in a good camera trap. Conclusions The present paper describes and discusses the desired features and specifications as defined by over 150 scientists using camera traps around the world. Data gathered also provide some insight into the market demand for camera traps by biologists, zoologists, conservationists and other wildlife researchers around the world. These design features are discussed under the guise of the ultimate camera trap for wildlife research, with the disclaimer that no such camera trap currently exists. Implications The information provided in the paper has and will be a useful guide to future camera-trap designs, although it is unlikely that all of the features required will ever be produced in a cheap camera trap.

Determination of ochratoxin A in green coffee by immunoaffinity column cleanup and liquid chomatography: collaborative study

A collaborative study was conducted to evaluate a method using immunoaffinity column cleanup with liquid chromatography (LC) for the determination of ochratoxin A (OTA) in green coffee at levels that could be included in possible future regulations of the European Union. The test portion was extracted with methanol-3% aqueous sodium hydrogen carbonate solution (50 + 50, v/v). The extract was filtered, and the filtrate was diluted with phosphate-buffered saline and applied to an immunoaffinity column containing antibodies specific for OTA. After washing, the toxin was eluted from the column with methanol and quantified by LC with fluorescence detection. Pairs of 4 homogeneous noncontaminated and naturally contaminated materials (mean levels of < 0.12, 2.44, 5.15, and 13.46 ng/g) and blank samples (< 0.12 ng/g) for spiking were sent to 20 participant laboratories from 8 countries. The materials were analyzed according to the method description and all difficulties encountered in the analysis were reported. Statistical analysis was carried out according to the Harmonized Protocol of the International Union of Pure and Applied Chemistry. The relative standard deviation for repeatability (RSDr) ranged from 7.42 to 20.94%, and the relative standard deviation for reproducibility (RSDR) ranged from 16.34 to 29.17%. The method showed acceptable within-laboratory and between-laboratories precision for green coffee materials, as evidenced by HorRat values of < or = 0.85, at the studied range, for spiked and naturally contaminated materials. The mean recovery was 92.8% for green coffee material spiked with OTA at a level of 4.82 ng/g.

Trace level determination of acrylamide in cereal-based foods by gas chromatography-mass spectrometry

A quantitative method has been developed for the determination of trace levels (<50 microg/kg) of acrylamide in cereal-based foods. The method is based on extraction of acrylamide with water, acidification and purification with Carrez I and II solutions, followed by bromination of the acrylamide double bond. The reaction product (2,3-dibromopropionamide) is extracted with ethyl acetate/hexane (4:1, v/v), dried over sodium sulfate, and cleaned up through a Florisil column. The derivative is then converted to 2-bromopropenamide by dehydrobromination with triethylamine and analyzed by gas chromatography coupled to mass spectrometry (GC-MS), employing (13C3)acrylamide as internal standard. In-house validation data for commercial and experimental cereal products showed good precision of the method, with repeatability and intermediate reproducibility relative standard deviations below 10%. The limit of detection and limit of quantitation are estimated at 2 and 5 microg/kg, respectively, and recoveries of acrylamide from samples spiked at levels of 5-500 microg/kg ranged between 93 and 104% after correction of analyte loss by the internal standard. Finally, a comparative test organized with two independent laboratories provided additional confidence in the good performance of the method, particularly at very low concentration levels.

Field evaluation of the CATT/Trypanosoma brucei gambiense on blood-impregnated filter papers for diagnosis of human African trypanosomiasis in southern Sudan

Most Human African Trypanosomiasis (HAT) control programmes in areas endemic for Trypanosoma brucei gambiense rely on a strategy of active mass screening with the Card Agglutination Test for Trypanosomiasis (CATT)/T. b. gambiense. We evaluated the performance, stability and reproducibility of the CATT/T. b. gambiense on blood-impregnated filter papers (CATT-FP) in Kajo-Keji County, South-Sudan, where some areas are inaccessible to mobile teams. The CATT-FP was performed with a group of 100 people with a positive CATT on whole blood including 17 confirmed HAT patients and the results were compared with the CATT on plasma (CATT-P). The CATT-FP was repeated on impregnated filter papers stored at ambient and refrigerated temperature for 1, 3, 7 and 14 days. Another 82 patients with HAT, including 78 with a positive parasitology, were tested with the CATT-FP and duplicate filter paper samples were sent to a reference laboratory to assess reproducibility. The CATT-FP was positive in 90 of 99 patients with HAT (sensitivity: 91%). It was less sensitive than the CATT-P (mean dilution difference: -2.5). There was no significant loss of sensitivity after storage for up to 14 days both at ambient and cool temperature. Reproducibility of the CATT-FP was found to be excellent (kappa: 0.84). The CATT-FP can therefore be recommended as a screening test for HAT in areas where the use of CATT-P is not possible. Further studies on larger population samples in different endemic foci are still needed before the CATT-FP can be recommended for universal use.

Rapid, low cost thin-layer chromatographic screening method for the detection of ochratoxin A in green coffee at a control level of 10 microg/kg

A thin-layer chromatographic (TLC) screening method was developed for the detection of ochratoxin A (OTA) in green coffee at a control level of 10 microg/kg. The method is based on extraction of OTA with a mixture of phosphoric acid and dichloromethane, purification by liquid-liquid partition into sodium hydrogen carbonate, separation by normal-phase TLC, and detection by visual estimation of fluorescence intensity under a UV lamp at 366 nm. The method was validated by performing replicate analyses of uncontaminated green coffee material spiked at 3 different levels of OTA (5, 10, and 20 microg/kg), and also by comparing results obtained on a series of test trial green coffees naturally contaminated with OTA (range 0.2 to 136.7 microg/kg) with those measured by a quantitative immunoaffinity/HPLC method. The agreement between the two methods was excellent, and neither false positive nor false negative results were recorded. This screening method is rapid, simple, robust, and very cheap, which makes it particularly well adapted for implementation in coffee-producing countries.

Aflatoxin genes and the aflatoxigenic potential of Koji moulds

Sixty-four Aspergillus isolates, 54 of which originated from food fermentations, and 18 Aspergillus reference strains were identified and screened for the presence of aflatoxin genes aflR and omt-1. Among the Koji moulds, not only A. oryzae but also A. flavus strains were found. Furthermore, 27% of A. oryzae and 93% of A. flavus strains lacked either aflR or both aflR- and omt-1. A selection of 29 strains was also checked for the presence of pksA and nor-1. This revealed large deletions in the aflatoxin gene cluster of some strains. The hybridisation patterns also suggested a polarity in the deletion events, originating in the vicinity of pksA and extending towards omt-1. Other strains exhibited BamHI restriction fragment length polymorphisms (RFLPs) for either aflR or for aflR and omt-1. All aflR and/or omt-1 deletion strains turned out to be unable to produce aflatoxin. The RFLP-carrying strains either produced only traces of aflatoxin or none at all. In 73% of the A. oryzae strains, no apparent deletions were detected with the aflR and omt-1 probes. Nevertheless, after incubation in aflatoxin-inducing media, no aflatoxin B1 production could be detected in those A. oryzae strains.

Distinct pathways involved in sound recognition and localization: a human fMRI study

Evidence from psychophysical studies in normal and brain-damaged subjects suggests that auditory information relevant to recognition and localization are processed by distinct neuronal populations. We report here on anatomical segregation of these populations. Brain activation associated with performance in sound identification and localization was investigated in 18 normal subjects using fMRI. Three conditions were used: (i) comparison of spatial stimuli simulated with interaural time differences; (ii) identification of environmental sounds; and (iii) rest. Conditions (i) and (ii) required acknowledgment of predefined targets by pressing a button. After coregistering, images were normalized and smoothed. Activation patterns were analyzed using SPM99 for individual subjects and for the whole group. Sound recognition and localization activated, as compared to rest, inferior colliculus, medial geniculate body, Heschl gyrus, and parts of the temporal, parietal, and frontal convexity bilaterally. The activation pattern on the fronto-temporo-parietal convexity differed in the two conditions. Middle temporal gyrus and precuneus bilaterally and the posterior part of left inferior frontal gyrus were more activated by recognition than by localization. Lower part of inferior parietal lobule and posterior parts of middle and inferior frontal gyri were more activated, bilaterally, by localization than by recognition. Regions selectively activated by sound recognition, but not those selectively activated by localization, were significantly larger in women. Passive listening paradigm revealed segregated pathways on superior temporal gyrus and inferior parietal lobule. Thus, anatomically distinct networks are involved in sound recognition and sound localization.

Production of ochratoxin A by Aspergillus carbonarius on coffee cherries

Robusta coffee cherries collected before and during sun drying from two coffee farms in Thailand were examined for moulds producing ochratoxin A (OA). Aspergillus ochraceus was only detected in one sample, whereas Aspergillus carbonarius was isolated from 7 out of 14 samples. On gamma-irradiated coffee cherries, each of the six tested A. carbonarius strains produced OA. More than 4800 microg kg(-1) of toxin were detected under optimal conditions (25 degrees C, a(w) 0.99). OA production was strongly reduced (230 microg kg(-1)) at an a(w) of 0.94.

Development of ochratoxin A during robusta (Coffea canephora) coffee cherry drying

The occurrence and formation of ochratoxin A (OTA) in Robusta coffee was studied for three consecutive seasons under tropical conditions in Thailand. Sun drying of coffee cherries consistently led to OTA formation in the pulp and parchment (husks) of the cherries. In replicated trials, dried coffee beans (green coffee) were shown to contain on average OTA concentrations that were approximately 1% of those found in husks. OTA contamination of green coffee depended on cherry maturity, with green cherries being the least, and overripe cherries the most susceptible. Defects, and in particular the inclusion of husks, are the most important source of OTA contamination. OTA contamination occurred independently of whether cherries were placed on concrete, on bamboo tables, or on the ground. The study suggests that better raw material quality, an appropriate drying and dehulling procedure combined with a reduction of green coffee defects can effectively contribute to the reduction of OTA in green coffee.

Behavior of Ochratoxin A during Green Coffee Roasting and Soluble Coffee Manufacture

As considerable inconsistencies are found in the literature regarding the influence of roasting and subsequent operations on the ochratoxin A (OTA) content of green coffee, experiments were undertaken to assess the evolution of OTA along an industrial soluble coffee manufacturing line. Both the variability and the amount of OTA naturally present in a lot of Thai Robusta green coffee were drastically reduced during soluble coffee manufacture. A small proportion of OTA was eliminated during green coffee cleaning, but the most significant reduction took place during roasting. The roast and ground coffee contained only 16% of the OTA originally present in the green coffee. Two phenomena are responsible for the elimination of OTA during roasting: a thermal degradation and a removal with chaff. Thermal degradation is the most important route of elimination, with <20% accounted for by the chaff. A further 20% reduction was observed during soluble coffee manufacture, so that the powder contained only 13% of the OTA initially present in the green beans.

Screening of European coffee final products for occurrence of ochratoxin A (OTA)

Samples (633) of final coffee products were drawn from the markets of different European countries relative to the market share of each product type and brand. These samples were analysed in a cooperative action with nine different laboratories. With low limits of detection (mean detection limit approximately 0.5 ng/g) no OTA was found in over half of the samples (334 negatives). In the remaining samples occurrence of OTA at a rather low level was seen. Only four samples (all instants) exceeded a level of 10 ng/g, whereas for both instants, and roast and grounds (R & G), over three-quarters of the samples were in the range from nondetectable to 1 ng/g. The overall mean for all R & Gs was 0.8 ng/g and for all instant 1.3 ng/g (for samples in which no OTA was detected, half of the detection limit was included in this calculation). In the brewing methods frequently used in Europe the OTA is essentially fully extracted. Consumption of four cups of coffee per day (approximately 24 g R & G or approximately 8 g instant coffee) contributes on average 19 or 10 ng/day respectively. Four cups/day is above the per caput consumption level in most European contries. Compared with the Provisional Tolerable Weekly Intake (PTWI) recently set by the Joint FAO/WHO Expert Committee on Food Additives at 100 ng/kg bodyweight/week, consumption of 28 cups/week contributes up to 2% to the PTWI.

Keeping the mycotoxins out: experience gathered by an international food company

As early as the mid-1960s the analysis of aflatoxins became an important part of Nestlé's quality control programme, especially since the Company's products include a wide variety of milk- and cereal-based foods intended for infants and children. At that time, dealing with this problem was hampered by the lack of simple and reliable analytical methods, the absence of legal provisions in many countries, the widely different origin of the raw materials, and the fact that sources of contamination were often beyond the Company's control. However, over the years substantial progress has been made, mainly by setting up an inspection system including suitable methods of analysis that allow compliance with raw material specifications to be checked at source. In spite of the fact that the problem of aflatoxins in milk, cereals, and oilseeds has now been largely tackled, it is increasingly necessary to step up our mycotoxin surveillance programme. Indeed, several other mycotoxins have now become a matter of concern, as witnessed by the recent fumonisin scare. Moreover, increasingly severe legislations put a heavy burden on the analysts responsible for the inspection of the raw materials, especially in European countries. This article presents the Company's considerable efforts over a period of almost 30 years in trying to keep the mycotoxins out, or at least to limit their concentrations to the lowest possible levels.