Characterization of agar/soy protein biocomposite films: Effect of agar on the extruded pellets and compression moulded films

Agar/soy protein biocomposite films were successfully processed by extrusion and compression moulding, obtaining transparent and homogeneous films. The conformational changes occurred during the extrusion process and the effect of agar on the final properties were analyzed. As shown by differential scanning calorimetry (DSC) and specific mechanical energy (SME) values, during the extrusion process protein denatured and unfolded protein chains could interact with agar. These interactions were analyzed by Fourier transform infrared spectroscopy (FTIR) and the secondary structure was determined from the amide I band. Those interactions were supported by the decrease of film solubility. Furthermore, the good compatibility between agar and soy protein was confirmed by the images from scanning electron microscopy (SEM).

Development of Bioinspired Gelatin and Gelatin/Chitosan Bilayer Hydrofilms for Wound Healing

In the current study, we developed a novel gelatin-based bilayer wound dressing. We used different crosslinking agents to confer unique properties to each layer, obtaining a bioinspired multifunctional hydrofilm suitable for wound healing. First, we produced a resistant and non-degradable upper layer by lactose-mediated crosslinking of gelatin, which provided mechanical support and protection to overall design. For the lower layer, we crosslinked gelatin with citric acid, resulting in a porous matrix with a great swelling ability. In addition, we incorporated chitosan into the lower layer to harness its wound healing ability. FTIR and SEM analyses showed that lactose addition changed the secondary structure of gelatin, leading to a more compact and smoother structure than that obtained with citric acid. The hydrofilm was able to swell 384.2 ± 57.2% of its dry weight while maintaining mechanical integrity. Besides, its water vapour transmission rate was in the range of commercial dressings (1381.5 ± 108.6 g/m2·day). In vitro, cytotoxicity assays revealed excellent biocompatibility. Finally, the hydrofilm was analysed through an ex vivo wound healing assay in human skin. It achieved similar results to the control in terms of biocompatibility and wound healing, showing suitable characteristics to be used as a wound dressing.

Ultra thin hydro-films based on lactose-crosslinked fish gelatin for wound healing applications

This study focuses on the development and characterization of an ultra thin hydro-film based on lactose-mediated crosslinking of fish gelatin by Maillard reaction. Lactose results in the only efficient crosslinker able to produce resistant to handling hydro-films when compared to conventional crosslinkers such as glutaraldehyde or genipin (tested at 25 and 37°C in phosphate buffer saline solution (PBS)).The disappearance of the peak related to the N-containing groups (XPS) and the images obtained by SEM and AFM demonstrate the highly ordered nano-scaled structure of lactose-crosslinked gelatin, confirming the crosslinking efficiency. This dressing presents high hydrophilicity and mild occlusivity, as shown by the swelling curve (max swelling at 5min) and by the occlusion factor of 25.17±0.99%, respectively. It demonstrates high stability to hydrolysis or cell-mediated degradation. Moreover, ISO 10993-5:2009 biocompatibility assay results in undetectable cytotoxicity effects. Spreading, adhesion and proliferation assays confirm the excellent adaptability of the cells onto the hydro-film surface without invading the dressing. Finally, the hydro-film enables the controlled delivery of therapeutic factors, such as the epidermal growth factor (EGF). This study demonstrates that lactose-mediated crosslinking is able to produce ultra thin gelatin hydro-films with suitable properties for biomedical applications, such as wound healing.

Valorization of marine-derived biowaste to develop chitin/fish gelatin products as bioactive carriers and moisture scavengers

Marine-derived biowaste was valorized to develop chitin/fish gelatin porous materials with the aim of being used as moisture scavengers and bioactive carriers. Chitin was extracted from squid pens, abundant and available biowastes from fishery industry, through a sustainable process and the environmental assessment was carried out. Besides the valorization of biowaste, it is worth noting that the use of this specific biowaste allows the avoidance of discoloration and demineralization processes to extract chitin and, thus, a lower consumption of resources, both chemicals and energy, in comparison to the conventional chitin extraction from crustacean shells. Consequently, this alternative source of chitin brings economic and environmental benefits. In addition to the reduction of food waste disposal, the incorporation of squid pen-extracted chitin into fish gelatin formulations led to the conversion of a biowaste into a value-added product. In this regard, chitin was employed as a reinforcing agent in order to improve the mechanical behavior of fish gelatin materials. It is worth noting that good compatibility between gelatin and chitin was achieved since no chitin aggregation was observed. Furthermore, more defined pores were obtained after chitin addition. Additionally, tetrahydrocurcumin was incorporated into the formulation as a bioactive and its release was analyzed during three days. It was observed that samples prepared with chitin and THC showed potential as active porous materials for bioactive delivery.

Gelatine-based drug-eluting bandage contact lenses: Effect of PEGDA concentration and manufacturing technique

Drug-eluting bandage contact lenses (BCLs) have been widely studied as an alternative to eye drops due to their ability to increase the drug residence time and bioavailability as well as improve patient compliance. While silicone hydrogel polymers are commonly used in drug-eluting BCLs due to their transparency, mechanical properties and high oxygen permeability, gelatine hydrogels are also clear, flexible and have high oxygen permeability and may therefore be suitable contact lens materials. Moreover, the rheological properties of gelatine hydrogels allow their use as inks in extrusion-based 3D printers, therefore opening the door to a wide range of applications. Drug-loaded gelatine methacryloyl (GelMA) BCLs with different concentrations of poly (ethylene glycol) diacrylate (PEGDA) were prepared using solvent casting and 3D printing. The prepared lenses were characterised for their swelling ratio, in vitro degradation, and drug release properties. The results showed that the incorporation of 10% PEGDA improved the lenses' resistance to handling and protected them during degradation testing, reduced the swelling ratio and prolonged the release of dexamethasone (DEX). Both techniques were deemed suitable to use in the manufacturing of drug-eluting BCLs noting that the optimal formulation may vary according to the preparation technique utilised.

Lactose-crosslinked fish gelatin-based porous scaffolds embedded with tetrahydrocurcumin for cartilage regeneration

Tetrahydrocurcumin (THC) is one of the major colourless metabolites of curcumin and shows even greater pharmacological and physiological benefits. The aim of this work was the manufacturing of porous scaffolds as a carrier of THC under physiological conditions. Fish-derived gelatin scaffolds were prepared by freeze-drying by two solutions concentrations (2.5% and 4% w/v), cross-linked via addition of lactose and heat-treated at 105 °C. This cross-linking reaction resulted in more water resistant scaffolds with a water uptake capacity higher than 800%. Along with the cross-linking reaction, the gelatin concentration affected the scaffold morphology, as observed by scanning electron microscopy images, by obtaining a reduced porosity but larger pores sizes when the initial gelatin concentration was increased. These morphological changes led to a scaffold's strength enhancement from 0.92 ± 0.22 MPa to 2.04 ± 0.18 MPa when gelatin concentration was increased. THC release slowed down when gelatin concentration increased from 2.5 to 4% w/v, showing a controlled profile within 96 h. Preliminary in vitro test with chondrocytes on scaffolds with 4% w/v gelatin offered higher metabolic activities and cell survival up to 14 days of incubation. Finally the addition of THC did not influence significantly the cytocompatibility and potential antibacterial properties were demonstrated successfully against Staphylococcus aureus.

Green hemostatic sponge-like scaffold composed of soy protein and chitin for the treatment of epistaxis

Epistaxis is one of the most common otorhinolaryngology emergencies worldwide. Although there are currently several treatments available, they present several disadvantages. This, in addition to the increasing social need of being environmentally respectful, led us to investigate whether a sponge-like scaffold (SP–CH) produced from natural by-products of the food industry — soy protein and β-chitin — can be employed as a nasal pack for the treatment of epistaxis. To evaluate the potential of our material as a nasal pack, it was compared with two of the most commonly used nasal packs in the clinic: a basic gauze and the gold standard Merocel®. Our SP-CH presented great physicochemical and mechanical properties, lost weight in aqueous medium, and could even partially degrade when incubated in blood. It was shown to be both biocompatible and hemocompatible in vitro, clearing up any doubt about its safety. It showed increased blood clotting capacity in vitro, as well as increased capacity to bind both red blood cells and platelets, compared to the standard gauze and Merocel®. Finally, a rat-tail amputation model revealed that our SP-CH could even reduce bleeding time in vivo. This work, carried out from a circular economy approach, demonstrates that a green strategy can be followed to manufacture nasal packs using valorized by-products of the food industry, with equal or even better hemostatic properties than the gold standard in the clinic.

Polyhydroxybutyrate (PHB) produced from red grape pomace: Effect of purification processes on structural, thermal and antioxidant properties

Red grape pomace was used as a source for poly(3-hydroxybutyrate) (PHB) production, which was then subject to a range of purification processes. The different PHB biopolymers were characterized for chemical structure, crystallinity, thermal properties, colour, release of compounds into different food simulants and antioxidant inhibition, and comparisons were made with a commercially available PHB. An increase in purification steps did not have a significant effect on the high thermal stability of the extracted biopolymer, but it decreased the degree of crystallinity and the presence of amino acids and aromatic compounds. With additional purification, the PHB powders also whitened and the number of components released from the biopolymer into food simulants decreased. The released compounds presented antioxidant inhibition, which has not been previously reported in the literature or with commercially available polyhydroxyalkanoates. This is of great interest for food packaging and biomedical industries where the addition of antioxidant additives to improve PHB functional properties may not be necessary and could be avoided.

Non-permanent primary food packaging materials assessment: Identification, migration, toxicity, and consumption of substances

Almost all processed food comes packaged in either plastic, glass, metal, or paper and paperboard materials, and many packaging materials are disposed of after a single use (linear economy). Based on the concept of a circular economy, the recycling of food packaging materials has become one of the main targets for industries and regulators around the world. However, recycling presents particular challenges, mainly related to the recycled material composition, which determines its reusability, application, functionality, and chemical safety. In this latter matter, it has been demonstrated that the use of recycled food packaging materials increases the number and possible sources of substances that could be present in the packaging material, which is of concern as substances that can migrate into food and cause health hazards upon consumption. This review compiles information regarding substances detected in non-permanent food packaging materials, focusing mainly on plastics, paper, and paperboards. The compilation of literature studies (110 research articles) on the presence of intentionally added substances (IAS) and non-intentionally added substances (NIAS) in food packaging materials, their migration, toxicity, and dietary exposure has been summarized, evaluated, and discussed. In addition, current sustainable food packaging trends have been mentioned. Finally, approaches to reduce the presence, migration, and potential exposure to substances that have migrated from packaging materials into food have been reviewed.