Review of secondary alveolar cleft repair

INTRODUCTION

The alveolar cleft is a bony defect that is present in 75% of the patients with cleft lip and palate. Although secondary alveolar cleft repair is commonly accepted for these patients, nowadays, controversy still remains regarding the surgical technique, the timing of the surgery, the donor site, and whether the use of allogenic materials improve the outcomes. The purpose of the present review was to evaluate the protocol, the surgical technique and the outcomes in a large population of patients with alveolar clefts that underwent secondary alveolar cleft repair.

MATERIALS AND METHODS

A total of 109 procedures in 90 patients with alveolar cleft were identified retrospectively after institutional review board approval was obtained. The patients were treated at a single institution during a period of 10 years (2001-2011). Data were collected regarding demographics, type of cleft, success parameters of the procedure (oronasal fistulae closure, unification of the maxillary segments, eruption and support of anterior teeth, support to the base of the nose, normal ridge form for prosthetic rehabilitation), donor site morbidity, and complications. Pre- and postoperative radiological examination was performed by means of orthopantomogram and computed tomography (CT) scan.

RESULTS

The average patient age was 14.2 years (range 4-21.3 years). There were 4 right alveolar-lip clefts, 9 left alveolar-lip clefts, 3 bilateral alveolar-lip clefts, 18 right palate-lip clefts, 40 left palate-lip clefts and 16 bilateral palate-lip clefts. All the success parameters were favorable in 87 patients. Iliac crest bone grafts were employed in all cases. There were three bone graft losses. In three cases, allogenic materials used in a first surgery performed in other centers, underwent infection and lacked consolidation. They were removed and substituted by autogenous iliac crest bone graft.

CONCLUSIONS

THE USE OF AUTOGENOUS ILIAC CREST FOR SECONDARY ALVEOLAR BONE GRAFTING ACHIEVES ALL THESE SEVERAL OBJECTIVES: (1) to obtain maxillary arch continuity, (2) to maximize bone support for the dentition, (3) to stabilize the maxillary segments after orthodontic treatment, (4) to eliminate oronasal fistulae, (5) to provide nasal alar cartilage support, (6) to establish ideal alveolar morphology, and (7) to provide available bone with attached soft tissue for future endosteal implant placement in cases where there is a residual dental space. We advocate for the use of a minimal incision to obtain the iliac crest bone graft and for the use of a corticocancellous block of bone in combination with bone chips.

Alveolar graft in the cleft lip and palate patient: review of 104 cases

INTRODUCTION

Alveolar bone grafting is a vital part of the rehabilitation of cleft patients. The factors that have been most frequently associated with the success of the graft are the age at grafting and the pre-grafting orthodontic treatment.

OBJECTIVES

1) Describe the cases of alveolar bone grafts performed at the Maxilofacial Unit of Hospital Sant Joan de Déu, Barcelona (HSJD); and 2) Analyze the success/failure of alveolar grafts and related variables.

MATERIAL AND METHODS

Descriptive retrospective study using a sample of 104 patients who underwent a secondary alveolar graft at the Craniofacial Unit of HSJD between 1998 and 2012. The graft was done by the same surgeon in all patients using bone from the iliac crest.

RESULTS

70% of the patients underwent the procedure before the age of 15 (median 14.45 years); 70% of the graft patients underwent pre-graft maxillary expansion. A total of 100 cases were recorded as successful (median age of 14.58 years, 68 underwent pre-graft expansion) and only 4 were recorded as failures (median age of 17.62 years, 3 underwent pre-graft expansion). We did not find statistically significant differences in age at the time of grafting or pre-surgical expansion when comparing the success and failure groups. We found the success rate of the graft to be 96.2%.

CONCLUSIONS

The number of failures was too small to establish a statistically significant conclusion in our sample regarding the age at grafting and pre-grafting expansion. The use of alveolar bone grafting from the iliac crest has a very high success rate with a very low incidence of complications. Existing controversies regarding secondary bone grafting and the wide range of success rates found in the literature suggest that it is necessary to establish a specific treatment protocol that ensures the success of this procedure.

Oral disorders in children with Prader-Willi syndrome: a case control study

INTRODUCTION

Prader-Willi Syndrome (PWS) is a genetic disorder caused by the lack of expression of certain paternal genes located on chromosome 15q11-q13. This anomaly causes cognitive, neurological and endocrine abnormalities, among which one of the most important is hyperphagia. The aim of this study was to assess the oral health of children with PWA and to establish preventive criteria.

RESULTS

Thirty patients with PWS (mean age 10.2 years) and 30 age- and gender-matched controls were included in the study. Twenty-six patients with PWS(86.6%) followed dietary treatment prescribed by their endocrinologist. Individuals with PWS had a mean caries index of 53.3% and Decayed Missing Filled teeth (DMFT) index 2.5, and 53.3% had gingivitis, in the control group the respective figures were 43.3%, 0.93, and 60%. Only the DMFT index (p 0.017) presented significant differences. Regarding stimulated salivary secretion, patients with PWS presented a mean of 0.475 ml/min with a pH of 6.15, while controls presented a mean of 0.848 ml/min with a pH of 7.53; the differences between the groups were statistically significant in both cases (p 0.032 and p 0.0001 respectively). The population with PWS presented a higher plaque index (> 2) than their healthy peers, but the differences were not significant.

CONCLUSION

Pediatric patients with Prader-Willi syndrome have an increased risk of caries and gingivitis. The children with this syndrome have a decreased salivary flow and a more acidic salivary pH. In these patients, dental care is an essential part of their multidisciplinary medical treatment.

Comparative study of postoperative morbidity in dental treatment under general anesthesia in pediatric patients with and without an underlying disease

OBJECTIVES

To identify and quantify the variables and their influence on postoperative morbidity in dental treatment under general anesthesia (GA) in pediatric patients with and without an underlying disease.

METHODS

A prospective, descriptive, and comparative analysis was conducted of healthy (n = 49) and disabled/medically compromised (n = 81) children treated under GA. Intra-/post-surgical, clinical epidemiology, technical, care-related, and pharmacologic data were gathered, as were postoperative complications.

RESULTS

The average age of ASA I patients (6.7 ± 4.4 years) was younger than that of ASA II-III patients (9.0 ± 4.5 years). Average hospitalization time was 4.27 ± 6.5 h in ASA I and 7.41 ± 6.8 h in ASA II-III. Significant differences were found between the two groups in fillings, pulpotomies, oral surgery, and scaling. Postoperative morbidity in ASA I and ASA II-III was similar both in frequency and severity and decreased during the first 72 h. The most common complication in both groups was toothache.

CONCLUSION

Postoperative morbidity is high after dental treatment under GA, but it is not higher in disabled/medically compromised patients.

Prevalence of sleep-related breathing disorders in children with malocclusion

Background

The paediatric population has a high incidence of sleep-related breathing disorders (SRBD). A notable risk factor is the presence of craniofacial abnormalities. The objective of the study was therefore to survey the prevalence of SRBD in patients presenting for interceptive treatment.

Material and Methods

Prospective study with a sample of 249 healthy patients. The "Paediatric Sleep Questionnaire" and "Sleep Disturbance Scale for Children" were completed by the children's parents and the results were evaluated. All patients had their medical records reviewed and underwent orthodontic diagnosis by oral examination, as well as dental cast and cephalometric analysis. Finally, we compared the results of the pre- and post-treatment questionnaires of 50 patients in the sample.

Results

Based on the results of the questionnaires, 22.8% of the study sample had SRBD. No statistically significant correlation was found between SRBD and the anthropometric characteristics and occlusal variables assessed. According to the cast analysis, patients with SRBD had a smaller maxillary width (p<0.003), and according to the cephalometric study, less overbite (p<0.003). Furthermore, the prevalence of SRBD was higher among patients with a history of adenotonsillectomy (p<0.02). Comparison of the results of pre- and post-treatment questionnaires revealed significant differences after orthodontic treatment (p<0.0005).

Conclusions

It is necessary to identify the presence of SRBD in orthodontic patients given its high prevalence. Patients with SRBD have a smaller maxillary width and less overbite. Key words:Sleep-related breathing disorders, paediatric sleep questionnaire, cephalometry.

Dental treatment under general anesthesia in a group of patients with cerebral palsy and a group of healthy pediatric patients

This is a comparative study between two groups, one of healthy children and the other of children with cerebral palsy, which underwent dental treatment under general anesthesia at Hospital Sant Joan de Déu Barcelona. The purpose of the study was to compare and determine oral pathology, frequency, severity and postoperative complications in pediatric patients with and without an underlying disease which undergo a dental treatment under general anesthesia.

Surgical Repositioning of the Premaxilla Using a Minimally Invasive Endonasal Approach

Objective:

The aim of this study was to evaluate a technique for the surgical repositioning of the premaxilla using a minimally invasive endonasal approach.

Design:

Retrospective review of clinical records.

Setting:

Tertiary care, University Hospital, pediatric maxillofacial surgery unit.

Patients:

Twenty-one patients (12 boys and 9 girls), ages ranging from 6 to 21 years, with BCLP+A and premaxillary malposition (PM).

Interventions:

Surgical repositioning of the premaxilla (SRP) using a minimally invasive endonasal approach, from November 2007 to November 2015.

Main outcome measures:

Achieving maxillary arch alignment and premaxillary stability was defined as treatment success. Intraoperative and postoperative complications were also recorded.

Results:

In all cases (100%), the treatment was successful either at first surgery or after reoperation. Two patients (9.5%) were reoperated-one due to premaxillary instability and one due to PM relapse. There were no perioperative complications.

Conclusions:

SRP using a minimally invasive endonasal approach is a safe and effective technique that levels and aligns the maxillary arch in preparation for SABG, which minimizes the risk of wound infection and premaxillary vascular compromise. The endonasal approach improves tissue quality of the mucoperiosteal flaps when performing the SABG procedure. Further prospective studies are needed to elucidate the best protocols and techniques for the management of PM in patients with BCLP+ A.

The use of 3D additive manufacturing technology in autogenous dental transplantation

Background

In medicine and dentistry, 3D technology allows the virtual planning and printing of surgical replicas of anatomical structures that can facilitate certain transplant procedures. In dentistry, 3D technology is useful in autogenous tooth transplantation.

Case presentation

We present a clinical case of an ectopic mandibular second premolar, describing the preoperative planning with dental replicas and the autotransplantation surgery. 3D prints of the surgical replica of the tooth to be transplanted was made using an Objet30 Prime® Printer, PolyJet. Clinical controls performed at 3, 6 and 12 months indicated the satisfactory evolution of the transplanted tooth.

Conclusion

3D additive manufacturing technology allows the preparation of a new recipient socket with the aid of a surgical replica of the tooth to be transplanted, thus minimizing handling and extraoral time.